Excellent video, thank you. Worth mentioning that where others have experienced this the issue has been due to a leak. Make sure you've checked for pipe leaks before recalibrating your maf
I've had to reset the MAF Adaptations 3 times on my 2010 330D Coupe. It seems to require this every time I disturb the MAF, eg by replacing the air filter. I bought a Launch 919 for £300 off ebay for OBD stuff on all the family's cars....
I’ve got this exact issue and done the same stuff as you - cleaned it, replaced it. No joy. But I don’t have android. Do you know any other apps that can do it? You sound local lol come do mine 😩
I have exactly the same problem After a few months the dpf won't regen Previously it did I realised it started throwing the maf error code on the App after the air filter change Hopefully adaptation will sort it out Thank you for valuable advice!
This BMW app is ridiculously awesome. Thank you
Excellent video, thank you. Worth mentioning that where others have experienced this the issue has been due to a leak. Make sure you've checked for pipe leaks before recalibrating your maf
Yes absolutely, spot on 👍
I've had to reset the MAF Adaptations 3 times on my 2010 330D Coupe. It seems to require this every time I disturb the MAF, eg by replacing the air filter.
I bought a Launch 919 for £300 off ebay for OBD stuff on all the family's cars....
Before you disconnect the maf, do the battery first
Well done my man
Thank you
Ho..I don't have option on my bimmertool resetting maf sensor...the car is 520d bmw f11
My one says expected 1600 and the actual 468 . The torque says expected 24 nm and the actual is 9 nm.???
What should I do?
When you drive, are the figures similar between the actual and expected?
Hi mate, you said the car has to be off (not running ) and ignition on for the actual adaptation to run?
Yeah ignition on
did you clean the connector for maf where it plugs in or did u remove and clean the maf?
Both mate just to be sure, and it still didn't work properly, that's when I decided to reset it
@@ramzz0964 are you used the old one?
I’ve got this exact issue and done the same stuff as you - cleaned it, replaced it. No joy. But I don’t have android. Do you know any other apps that can do it? You sound local lol come do mine 😩
To be honest mate, I've not had an issue with the app and I don't think android or Apple with make a difference lol
Which app did you use mate?
Bimmertool on android
I have exactly the same problem After a few months the dpf won't regen Previously it did I realised it started throwing the maf error code on the App after the air filter change Hopefully adaptation will sort it out Thank you for valuable advice!
Give it a good clean aswell
Thank you bro will give it a try
No worries bro 🤙🏼 let me know if it worked
my maf reading at idlle is 8-9 g/s Is that normal?
Seems a little bit high, is the expected and actual two very different figures or are they close?
@@ramzz0964 is that maybe because of leak or broken maf
@@ramzz0964 no it's not close
@@kucickula try cleaning it out first, use maf cleaner and then run the scanner again
Is 0.3 g/s on idle normal?
Thx mate , i have the same problem. I will try 😊
I don't know why my expected value expected is 2000mg/stk and I still have 450 after reset MAF SENSOR
Did it work?
@@ramzz0964 nope
Wow mine says expect 1217 😮 dont know why its expecting that much
It happens, seen some that say 2000 reset it and see what's what
@@ramzz0964 I did reset it and it's still says expected 1270 nothing changed. It's only the expected side that say that number so I'm a bit baffled
@@ramzz0964mine shows 2000 and i dont know what to do
What says the actual @@user-gy9me2sg9u