How to Remove & Replace 2018-2020 F-150 Factory Halogen Headlights
HTML-код
- Опубликовано: 28 авг 2024
- This video will walk you through the process of removing the factory halogen headlight assemblies on your 2018-2020 F-150.
If you are looking to replace just the headlight bulbs without removing the entire housing, you can remove the front wheel well liners to access the back of the headlights and remove the bulbs.
2018-2020 F150 Headlights & Headlight Upgrades:
www.stage3moto...
2018-2020 F150 Lighting Parts & Upgrades:
www.stage3moto...
Grab Stage 3 Merch: www.stage3moto...
SUBSCRIBE AND FOLLOW
Facebook: / stage3motorsportscom
Instagram: / stage3motorsports
Website: www.stage3moto...
never has a RUclips video changed my mind about somthing I was going to try to do myself.
That's the most F upped thing I've ever seen for what should be a minor maintenance procedure.
You must not have worked on many Subaru or Audis...
How is changing the entire headlamp assembly a "maintenance" item?
Yea all the new trucks are that way. Got to take damn near the whole front end just to replace a assembly
I heard Ray was the same
Great detailed video, but ABSOLUTELY NUTS to have to go through all these steps to replace a headlight!!!
I can't believe there is this much effort involved in simply trying to change out a light bulb. Seriously!
If you want to simply change the bulb you can access it from behind the wheel liner
Awesome, I'll be taking my 2 week paid vacation so I can have enough time to attempt this
I'm sure you've done this by now but I just did mine and it took 20 minutes for both lights. This way is absolutely ridiculous and unnecessary. You can remove some screws in the wheel well that hold the liner in, fold the liner back until you have enough room, reach up, remove the dust cover and change the bulb. It's so easy, I didn't even get half way through my beer
@@Pancho_86so wait, you were able to change the bulbs without removing everything? You mean from under the truck?
I didn't know that you had to take the whole truck apart to replace the headlights. Forget that! I'll just buy a new truck.
🤣🤣🤣
You don't 😂 this is ridiculous. This is about 10 steps too many
I just finished mine, did both headlights in 20 mins
You've got to be fucking kidding
@@Pancho_86you gonna drop a video or nah?
I had replaced my housings with the Alpharex Pro Series Projector headlights when I bought my F-150. They come with H7 Halogen bulbs, so you HAVE to remove the headlight housing to replace both the high and low beam bulbs. I didn't know that when I switched to the Alpharex, but since I installed the Alpharex my self, I went ahead and replaced the bulbs myself. This video is the greatest to walk me through the process!!!
This video has made me decide to hand in my Man card and switch to a Prius
Great video man thank you! Wife had a truck deer incident right before a fishing trip up North and this video made it a breeze. Thank you!
Terrible engineering, they should offer free lifetime headlight replacement with every purchase.
I’ve been doing my own wrenching for almost 50 years and believe me I’ve seen DUMB. With this mess I’d say Ford really jumped the shark. There is absolutely no excuse for creating a headache like this for a regular maintenance item. When you consider how often Halogen headlights burn out it’s even worse. Truly FOUND ON THE ROAD DEAD👎🏻
This is to replace the entire headlight assembly not the light bulbs. I replaced my light bulbs on my 18 F150 in about 15 minutes. That was both sides.
I agree with the other comments; however, I will say I appreciate this video because I could not have done this myself without it. Pain in the butt, but I was not paying Lord knows how much at a shop for them to do it.
Same
Oh cool. So you don’t actually have to remove the tailgate
😭😭😭
Boy looking at these comments I realize I wasn’t the only one that said nah I will just pay somebody
How many of yall think this is the process to replace the bulbs? Those are accessible through the fender wells. An i hate to break it to you but, any reasonably modern car is going to require a bit of dissasembly of the front end usually including the entire front bumper on cars to get the housings off.
This is the procedure to replace the bulbs. You can’t just reach around behind them to get them out like you could on the 98 Taurus or the 2006 Jeep Liberty or the Mercedes Sprinter.
@@DeltaFoxtrotWhiskey3 except that you can through the wheel well and fender cover. i did exactly that on my 2018. to replace the actual housing i get the massive dissasembly. but for just the bulbs its not as intense.
Damn I’ve changed my mind on replacing mine smh 🤦🏼♂️
I'm a die hard Ford guy. But they really fucked up by making you take apart the whole front end to get a damn head light out... huge miss
Many comments about how ridiculous this is to change out bulbs. That’s correct, it is ridiculous. HOWEVER this is how the entire headlight assembly is removed, not the only to change the bulbs. The bulbs can be replaced easily by removing a few screws from the wheel well liners.
No they can’t. I just tried that. I couldn’t even fit my hand in there to get the dust cover off.
im upgrading a buddies grille to the raptor style and he also ordered some new headlights. this will make the whole process easy for me in the end!
GREAT VIDEO. Trying to replace the bulbs by crawling through the wheel wells (as simplified in other videos) is close to impossible. This process is well worth the time to get it done. However, the design by Ford to necessitate all this is seriously flawed. Thanks for the video!
Awesome buddy, thank you
Very detailed explanation. 🎉🎉🎉
All that just to get the housings out 🤦🏻♂️
This is to change the headlight not the bulb. Owners manual even says to go thru the wheel well. I replaced my fog light (with led) and low beams (led bulbs) in 15 minutes each side.
So I just did this like 5 minutes ago. Followed everything he did and it was really simple. Was about 1.5 hours to do both and most of that was researching the video to see the next step lol. My only part of advice is that, if you are doing the fog lights too. To just change the bulb out when the headlight is out, save you from laying on the ground to just do it when the light it out! Went smoothly to replace all 6 bulbs!
Kill some time and reach through the wheel well 👍🏼👍🏼your welcome 😊
What a shitty design by Ford. I guess mine stays
During the first step (fender flare removal) your video shows the retaining clips stuck to the trim piece. Like you, my retaining clips were also stuck. What you failed to show was the step removing those clips and attaching them back to the flare. If your clips stick to the trim piece, you cannot properly attach the flare. Make sure to remove the clips from the trim and reattach to the fender. Hopefully this comment saves some headache.
I just tried to replace mine with LED but didn't do it this way. I removed four screws in the wheel well and a clip, removed the dust cover. I then tried to turn the bulb counterclockwise but couldn't budge it. I was afraid of breaking it so I just stopped and reattached everything. I'll definitely look for someone to put these on.
Great vid
Anything worth doing, is worth doing right! That's why I'm definitely paying someone to do this when I replace mine after watching this. Is it possible to make it any more frustrating to replace a stinking bulb .
How much was it to pay someone
All that nonsense just to remove a headlight. Engineering gone amok again.
the old style fords were only 3 screws..i changed mine in my 2019..it took me 2hrs..just take ur time and u will be ok
Some Ford engineer walked in on his wife getting jumped by a mechanic and has been taking it out on us ever since.
Wanted to replace the HL on my work truck, but Im not goimg through this entire ridiculous process to replace one lamp.
This video also helps me make the decision to not buy an F150 as my personal truck. I think I'll go with a chevy
Great job thank you!!
I just wanna replace the bulb..
Makes me miss my 98 Chevy. All i had to do was take out 4 screws! Did both in the autozone parking lot....
Just finished replacing my driver's side bulb. I removed 2 screws and bent the fender cover back and reached up inside to remove the bulb. Took about 10 minutes.
Looks like the factory headlights are staying!!!! Eff that
This is not bad compared to trying to add running lights on a tow mirror for a base model. But im still not looking forward to it
What are those wiring at the back of headlight called?
🤦🏻♂️🤦🏻♂️🤦🏻♂️ engineers are the wors
I came here cause i bought a used 2019 and the passenger side bight is aimed at the ground and is apparently stuck. I was going to try to remove the assembly an "un-stuck" it. In my old 06 Silverado, you popped the hood and pulled 1 pin and the whole yhing just rolled out. It was like a 6 second operation. This is absurd.
As much as I love my truck, all this to replace a headlight is beyond wrong.
For a minute there I thought he was going to have to remove the engine and transmission.
Idk how tf, but I broke the frame that holds the shutters behind the grill, 🎉
You don’t need to disassemble the entire front end. You can remove 4 screws from the inner fender and remove them from behind. It’s a pain, but it’s not this!
My 2004 silverado was like a 2 minute job.
It would probably be easier to find competent engineers for future models.
What is worse is my Truck is a Platinum. Three or four more steps in changing out a broken light assembly.
You're showing the ford from 2018 but my husband's truck is a 2015 model and there are no bulbs in it. There's a whole system that costs obout $300. There is no bulb there. The entire Headlamp FL3Z-13C626-C lamp costs $270 plus tax and shipping. What they are doing to customers is terrible. His front light just burned out and he took it apart and couldn't find any bulbs. And no one is talking about it. And nobody didn't make any video about it . He would have to go to the service center and pay a few hundred for it. In the past, you went to the store and bought a bulb for 2 dollars and changed it in just a few minutes. It's a nightmare now.
This video is to replace the unit.
You don't have to take your truck all apart... just remove your tire... a couple screws and a plastic screw clip and pull the plastic fender out of the way, revealing the lights... just reach up in and replace the damn light.
And that's pretty much exactly what it says in the description. Lol
@@cheeznhard Lol... I must of missed that... I just watched my friend change his headlight... after I was trying to show him this video... I guess, the 1st time he changed a headlight on this truck, it took him like 3 hours, the 1st time.
Good thing I got vacation time holy hell, these engineers literally made this so horrible, my 2012 was pop the hood take out 3-5 screws and boom that's it
wow, I still love my F150, but I miss the old days when trucks were simple, this seem like a lot of clips and metric bolt changes.... just saying
Woww im getting rid of my truck thats rediculouse
Good video
Wtf
I fucking hate Ford because of this now.
This can’t be real
I'd rather get a second vasectomy than change out these headlights.
This is completely insanely stupid. Unbelievable.
I have to take the whole front apart to change a headlight?! Real fucking stupid!
This is a joke right
Ummm, no
Ummmmmm,,,,no.
Every single time I pry the clips out they just break fml
Dumb design to remove bulbs from your truck. what happened to just reaching behind the light and pulling out the bulbs. simply stupid design
This is bullshit!!! Im done buying fords.
what a joke, i'd rather put some nice halogen bulbs
Boys, do NOT waste your time with this bullshit 😂. I just did both headlights in 20 mins. Look in your wheel well and you'll see about 3-4 small screws holding the liner in. Remove those and you can fold the liner back and use the tire to hold it. You can easily reach up, remove the dust cover and change the bulb. This way in the video is absolutely ridiculous