I’m a welder too and I must say this welder is awesome!! I’m in Canada so Canadian tire sells a blue model, 3 yr warranty. I have a couple because they’re so Good!
That's awesome! It's good to hear that from another welder. It's the perfect machine for building handrails on-site. Trying to do gas Mig in the wind doesn't work, and some of this handrail is so thin that stick isn't a good solution either. I don't know much about Canada, but I have heard of a store called Princess Auto?? I think the Century machines are popular up there too
Just bought my Titanium Flux 125 a few hours ago on an Inside Track sale. I haven't welded a day in my life and I'm starting at almost 50 years old. I am so psyched to get started! My goal is to eventually learn TIG as well, but I am in no hurry. I've already got this video saved and will be looking at more. Great stuff man, thank you!
I took Advantage of the harbor freight sale. I bought the 125 welder. I was watching your video and i would stop it go out in the shop a try each one of those welds. I seem to be better at little circles. I'm going to practice each weld in case i need them. I want to practice on the bed of my truck and tach weld metal patches. I know I have to space out my tachs so don't worry about that. Thanks for the video. I'll be back.
Glad it helped. I like to start at 1/2" stickout, but as it starts going, I move it in. When you have a hot puddle going, a short stickout will drive the wire into that hot puddle. A long stickout will just bounce out of it and cause spatter and bad weld joint
I think you're right, number 2 was good! Nothing to it but some practice. When I build hand rails on-site, I use a combination of all 4 of those, based on if I'm doing it underneath, on top, on the side, thicknesses.
I'm happy you subscribed and hope you enjoy the other videos. I have many videos for you to watch, and more to come. Make sure you click the notification bell, because I give away a lot of stuff and you don't want to miss your chance!
Thanks for doing what you do,and showing me how simple it can be with some practice.id like to build and fix things that Im breaking and bending,I have a racecar and im always looking for somebody to weld bumpers and brackets for me,now I can pick up a welder and start doing it myself.thank you for showing us the tips and tricks..😁💯👍👊
Jist started practicing welds yesterday. I'm so glad I watched your channel. Now I will try all 4 methods to see what 'fits' me well. Question about eh Titanium......Is the spool spindle suppose to be locked into the welder frame? Lost my operators manuel and don't know for sure.
You want it right enough to where it doesn't come unraveled on its own, but loose enough so that the drive wheels can still pull the wire off. Good luck with your practice. Come back and let us know how it's going
🙋♂️guilty, I finally snagged 1 for 99.00! I've been debating for the past year to get one or not, they had them on sale for $126.00 awhile back, but by the time I got there they were out of stock. I like your style of video - no fluff, no bs just down to earth real life experience. New subscriber hoping to learn all of this new tech stuff, I haven't touch a welder since 1983 (an old lincoln stick welder about the size of a chest freezer, that loved the electric)
Welcome, and thanks for subscribing. Thank you for your comment. I like to keep it simple and get right to it. These videos are harder to do than I thought, but if I help someone it's all worth it. You will enjoy the new welder. Things have come a long way since the old Lincoln Tombstones
Jason, I was one of your very first subscribers, been waiting a while now to see if you’ll do a rig tour, keep up the videos man favorite welding channel on RUclips!
Thank you very much, and I really appreciate your support, I really do. A few others have asked for a rig tour also. I have a few things I want to do to my truck before I do a tour. Hopefully I can get those done over the Winter when the work slows down a bit. When I get that done, I will reach out to you and let you know it's up. Thanks for following along with me. If you have any other suggestions for videos, please let me know. It's sometimes hard to come up with ideas.
A lot of good information here. Thank you. I have this machine, and I have had good luck with it. While you were welding, I wished I could have seen that puddle. All of the welds look great. I will try all of them just to see which one works best for me. Thanks again.
Yep, I'm working on a setup to video the welds better. But you can still see my movements if you look at the gun, and my hands. I will keep working on the arc shot. I can shoot through a helmet, but it really messes with the camera, so I have to dive more into the manual settings
Never welded in my life but always wanted to bought this some time back and never looked back, works like a champ and I find myself welding like a champ. I will say though tried welding some muffler pipe and it was a struggle kept burning through so if you feel like making a video showing joe that would be great.
That's awesome! You're a natural. It is a little tough on thin-wall pipe, but with a little more practice, you will get it. Flux core burns really hot. Muffler shops typically use .023 wire, very thin.
Couldn’t agree with you more buddy, I’m not a welder, but I am mechanically inclined, I had mine dialed in and welding pretty good in no time actually welded a piece of steel on my buddies 3-D laser printer that had broken.😁
Welcome to the Titanium Team. I've had two I've used for YEARS. These are absolutely one of the best financial wins you can purchase at HF. These machines perform perfectly - especially concerning their price point. Couple them with high-quality FC wire like Blue Demon and you have VERY little splatter. I've made dozens of tables and projects with these welders. One constructive criticism note for improving on these, you toe portions of the welds are a bit cold. Consider turning it up a smidgen more to blend those a bit better. Otherwise, you're doing great.
Thanks for your comment. Like you, I'm on my 2nd one as well. Got the first one shortly after it came out. They are great for when I need to go on location with it. You don't have to worry about the wind, or lugging around a big tank. You are right about the cold toes. My shop is really old, and some of the wiring/breakers are suspect at best. I was really surprised I was able to do the demo, at those settings, without tripping a breaker. Usually when I'm using this, it's off the generator in my truck, so that's usually not an issue. I was trying to get the demo finished before the breaker tripped. More heat would have helped, and a little more time at the toes to let it melt in. Good catch
@@AllStarWeldingSC Because this little welder puts the power out especially over the same variation of the 'Century' model, it'll take it - if you can give it. So I wired a dedicated 30Amp to the side of my house to run this puppy and it literally won't stop. Well built little Inverter Welder for the price! Cheers.
Yup I got one for 25% off as a member! Now I see that some of you got it for $99… not happy! Glad you guys got the 99 deal .. Good video… got good info…. Can you do a video on welding sheet metal ( repair on old car) .. the setting ! Also I have seen ( I think) placing the nob on the surface to weld ( not the wire) .. good or not or my eyes need glasses.. Great video plan on keeping it 👍
That $99 sale was for one day only, with a limit of 2. I found out about it the next day, or I would have picked up 2 more. Automotive sheet metal is not best done with flux core. I'm not saying it can't be done, but would be better off using .023 Mig. I will see if I can make a video with flux core. As for your other question, I don't understand what you mean by "knob"
Thanks for the video! I never realized how important stick out was. I like to compare it to a mechanical pencil. If you stick an inch of lead out and try to write with it, it’s hard and the lead will break off. But if you just put an 1/8 or so much easier to control.
Exactly. The wire has to be very close to the work to make it work correctly. That's just about the best analogy I've ever heard. Can I use that? I will use your name in the video when I use it
2 and 3 are what im going to try. Really like how those turned out. I have to do some welding on my trailer. I got the titanium on the deal of the day sale awhile back but haven't gotten around to using it yet. I haven't welded since shop class about 15 years ago haha. Just came across your channel. Thanks for the tips!
Let me know which pattern works best for you. I like the circles the most, but it depends on what I'm doing. There is also a C pattern that I didn't talk about.
Hey, thanks for the video. I just wanted to pick up a small welder that is user friendly for around the farm and weekend warrior projects lol. I have never welded a day in my life and was wondering if this would be a great one to weld trailers tractors and small projects. Thanks All Star welding!
It is a great machine for those types of projects. Just watch the video again and you'll be welding like a pro in no time! Watch the one where the girl came to visit. She was an absolute beginner, and did very well
@@AllStarWeldingSC awesome. I have a horse trailer that needs a tongue repair and that was my inspiration for buying a machine. I will check the video out thanks. If I have any other questions, do you mind if I ask you? Have a good weekend bud!
Sir you are very kind. I’m a fan. This is the first video I’ve seen of yours. Class act. Thank you for your work ethic and honesty within this video. What state are you in? Just curious. Thanks!
@ haha! I get the “where are you from” all the time with my accent. Yeah, yeah, the northern one. Ha! I could just tell from the honesty in your personality. You seem like someone that I would enjoy working with. 👍👍
I use a 10g extension cord. I think it's 50ft. You should consult a cord chart for the proper length/gauge requirements. As for the breaker..... It really wants a 20amp. I my shop, most of my 110v outlets are 15amp. It will trip the 15 if you have the power set to more than 1/2 way. I usually run it off my Vulcan Outlaw, which has 20amp 110v breakers. I can really crank it up with no trouble. My shop is pretty old, so I don't know if the wiring will support 20amp breakers. But again, I don't use it in the shop much, mainly just for these videos. I wish it had the capacity to also run on 240v.
Do you have a vid of the theory of how to use these cheap welders, and the why and when you would use the different types of welds? Z vs little e vs out and in?
There are so many variables as to when and why. That's when your expertise and practice will come into play. Instead of practicing just on flat pieces on your work table, change things up a bit. Set some pieces vertically. Hang a piece of the edge of your table, get down on your knees and practice welding underneath it. Practice thinner pieces to thicker pieces. There's really no theory to it. Just practicing and remembering what works and what doesn't.
Thanks! I really appreciate that. I'm not the fanciest RUclips channel, with fancy sets and lighting. Just a guy doing what he can, with what he's got, trying to help someone. Comments like yours are much appreciated.
Do you have a preferred wire? I have some Vulcan .030 and just ordered some blue demon .030 for body work on my truck/rust repair. Have a lot of years under the helmet and flux core is a little newer to me. Thanks man! Awesome videos
Thanks, I really appreciate the kind words. My #1 go-to wire is Weldcote. .039 in flux core, and .035 in the mig. If you want to see some really good videos about wire, Mike Festiva and Brandon Lund both have a really good wire comparison video, comparing many different types.
@@AllStarWeldingSC Awesome, good to know, thanks for the input. Definitely subscribed to your channel, you have great content. I’ll keep an eye out for Weldcote
How often does harbor freight have a $99 sale? was that for black Friday? I like the forward and back weld. I want to learn to weld exhaust so i need a good seal.
For exhaust, you'd be better off with the circles. And no, that wasn't black Friday. Just a random day. One day event, announce the day before. Limit of two. I have never seen it at that price, not even for a sale.
Oh wow ... The difference is night and day. The old Chicago is a transformer based machine. It's only settings are High/Low and I/II. Those are only 4 different taps off the transformer. The Titanium is adjustable on power and wire speed. The Titanium is inverter DC based. I remember when the Titanium first came out. I couldn't wait to get my hands on it. After my first try, I was amazed at how different it welds from the Chicago. I gave away the Chicago the next day. Look for my video about the give away. I'm giving away another Titanium, this is the 3rd time. I try to do it about every 3 months. Watch the video, follow the rules, maybe you can win it!
Two more questions:-) When you start, do you have the wire touching the metal or is there a gap like a spark plug? Maybe do a video for use who are trying to use this in a regular home. What is a good set-up? I don't have a nice metal weld table like yours. I have a workmate bench I can use in my backyard? (I have had mine for over a year and never used it, I've wanted to:-) Subscribed:-)
I usually start with a gap. Not very much of a gap though. However, there have been times when I had to start with the wire touching, for various reasons. So I really don't think it matters. As far as your work set up, just be careful when welding in your back yard. Dead grass ignites easily! There is a folding metal welding worktable you can get at Harbor Freight. It's pretty nice. And when you are done, you can fold it up and put it away
Great vid. I have the chicago electric flux 125 but when i saw this for 99 bucks i had to do a double take…couldn’t believe the discount and many have said this was much better than the old ce125 i got one! Your video solved a lot of my issues but one thing that’s still an issue is i have the 39 dollar hf shield that i got on sale for 29 but the issue is i still have a hard time seeing my weld puddle. Is it just a matter of swapping out for a better lense rather than a brand new helmet or do i just need to be closer to see?
@@AllStarWeldingSC i will take a look at the user manual again but i only saw 2 adjustments. I could adjust sensitivity (when the auto-shade how much light is needed before shade goes dark) and dela (how soon the shade goes dark once the sensor detects brightness)
Do you think this can tackle mobile welding jobs such as Rod iron fencing and Handrail repair? I’m thinking about starting a little side hustle doing this. I have my carts just no welder. It’s on sale right now and will probably buy regardless
Yes. I use mine for fence and handrails all the time. Also use it when I need to build a new one on location, as I did today. I have Mig, Tig, and stick in the shop, and I use the Outlaw for stick and to run the Titanium Flux Core out on mobile jobs.
@ oh nice, I have my eye on the outlaw for when it goes on sale. I want to make a little money with the buzz box first before I upgrade. And when you use that mobile, do you plug in to the home owners power or do you use a generator?
I have a inverter stick welder and have been working on an old motorcycle muffler system. Even bringing it down to ~45 amps with 1/16", 6013 rods, reversed electrode, it still burns through way too easily. The oem tube thickness is about .050" metal, the replacement pieces I'm trying to add is 16 GA. Would this welder be a big improvement?
Might be a good idea to explain the different types of flux core wire. E71T-GS, E71T-11, etc. Most people would t know the difference between them and their purpose.
Great video, Newbie question, why won't i get an electric shock? There is High amperage going through that thing and even with gloves what if I touch the piece?
Good question! I've never really thought about it, but as long as you are not touching the metal with one hand, and the wire with your other hand, then pulling the trigger, you should be good.
Thank you for the excellent video. Just subbed. Question: Can this welder run on a generator to build corrals with 2 3/8" pipe? Are the welds deep enough for that kind of work? Thank you.
Thanks for the sub, and the question. The nature of Flux core burns pretty hot, and in many cases, it pretty much on par with stick welding. At home with a 15amp circuit, about the highest you can get on this machine is around G-E and 5.5-6 without tripping a breaker. It was the same on my Dad's 3500w inverter generator. But out on a mobile job, I run it off my Vulcan Outlet 6500w generator with absolutely no problem, even when doing 1/4" plate. The Titanium Flux really prefers a 20amp circuit. I would say that if you were using any generator over 5000w that you shouldn't have any trouble building that. For those pipes you could run E-F and 6-7, and will be fine. It would probably be as good as 3/32 6010 rod. I would suggest doing the little circles pattern.
@@AllStarWeldingSC FYI. I'm picking up a new in box Titanium 125 with helmet for $80 from a gentleman that got it as a gift but he does not weld. I saw an almost new generator on Craigs list, DuroMax 4400, 120/20AMP, 240/30AMP for a really good price, but based on your recommendation it's probably better to get a bigger generator, at least 5000W, right?
I've never been really good at reading the labels and figuring out the needs. I run this with no problem off the Vulcan Outlaw, which is 6500watts. But, one time I went to my Dad's house for a little repair. He had one of those quiet inverters from Harbor Freight, I think it's 3500w. It kept tripping the breaker, at not too high of a setting. So use that info, if that helps. Maybe someone with more knowledge about this will chime in.
@allstarwelding have you used this little welder at max settings with the vulcan outlaw? im still on the fence on buying the vulcan outlaw but if it can run this at max then ill probably get it
@@Leo-y6i yes I have. You will like the Outlaw. It's a beast. I also use it for my Primeweld 160 with Flux wire, and my Primeweld MTS-200. And of course for it's stick capabilities. It will also let me weld while my helper runs the grinder or a saw at the same time. I've used it to run lights and weld on night jobs.
My 125 welder in directions say no extension chord and in your video stated using one. Is it ok as long as you are not far from plug or do u suggest a specific chord size ?
With my 125, I regularly run a 50ft 10g extension cord, and run off a generator (actually the Outlaw). I would say just keep it short and big. 50ft is ok with a 10g, 25ft max with a 12g. I would not suggest a 14g at all.
Yes, with the right settings. Absolutely. Just concentrate the most of your heat on the thicker material, so it doesn't blow out. If it does, let it cool, then just hit it with short blasts to close the hole. Maybe I will make a video about closing gaps and holes with flux core.
@AllStarWeldingSC thank you sir for your quick response. I just got out of work and about to head over to harbor freight and pick one up I was on the fence (no Pun intended) about it
You said wire matters. What wire are you using? I'm brand new to welding. Recently bought a Titanium 125. I'm getting lots of spatter and I'd like to know how to get welds like yours. Obviously decades of experience matters too, but I feel like I should be doing better than I am.
I make it no secret.... I am a huge fan of Weldcote wire. I keep .030 in the Flux machines, and .035 in the mig machines. Other great wires are Blue Demon and Forney. Over the years, I have used every wire you can think of, but I have been on nothing but Weldcote for 3 years. There are a few things you can try to keep spatter at a minimum. Use a higher setting if your material can handle it. More heat will let the wire dig in and melt, instead of bouncing off. Move in on your weld. Keep the tip as close as you can, maybe 1/8 - 1/4. Gets your tip all nasty , but it makes a good weld. If you want, you can get some nozzle dip and stick your tip in it before welding. Use a wire wheel on a angle grinder, before and after welding. And try using an anti-spatter spray. They actually work well. Use real anti-spatter spray, not cooking spray. If you want to see a really good review of over 30 sprays, Fireball Tools made a nice video, but it's 45 minutes long. Mike Festiva and Brandon Lund both have videos comparing the popular brands of Flux core wire. They are worth watching!
I was at HF on Tuesday 15 minutes before the doors opened to get one of these. Can't wait to see how the Easy-Flux 125 DC inverter does versus the Chicago Electric flux core AC machine I bought years ago. I'd vote for back and forth (#2 I think) for cosmetics, but it would be cool to cut them in half to see a side view of the penetration. Isn't there some acid or dye you can put on the cut welds to see penetration? Anyways, thanks for posting this!
I like the bird poop welds because that's where I'm still at. Those are very pretty weld may be someday I'll get to your level. What are the setting you didn't say in video?
Oh come on, brother. You've got to get away from the bird poop. Haha. Like I said in the video, the key is to use BOTH hands. One hand in the gun, and the other hand to steady or guide the gun. Start with just 1/2” stickout. Once the arc starts, leave your tip the same distance, or even move in just a little. Just guide the tip back and forth and lay that wire into it. You can do this. I promise!! I forgot what my settings were on that video, and I'm sorry I didn't mention it. That was 3/16 or 1/4 plate, so I imagine it was pretty high. Maybe F-7 or so
@@AllStarWeldingSC Sorry about that. I was so focus on your hand position, movement and recommendation that I didn't read it. Again, I didn't know Ti-125 can weld that pretty. Thanks again.
No worries. I realize in the video, that you can't see the actual weld bead (I'm working on that), but you can see the torch movement and my hand movement. When I'm talking about the back and forth movement, I move to the edge of the previous puddle, then move back to the middle of that puddle, then to the edge, and back to the middle, repeat ...
I not only read the instructions from front to back on every purchase, but I keep the instruction booklet until I get rid of the product (even though it's available online).
That's a great way to make sure you know how to use it! I have a file drawer that is nothing but instruction books. And, on the inside, or on, the book, I record the date I bought it and the receipt
Yeah. I'm working on that. When I shoot through a lens, my camera goes nuts. But I'm working on it. You can basically see my movements if you look at my hands and the gun
I'm like you, I run in tight. I've been welding for a few decades and I have one of those little machines in my shop as well as my bigger commercial machines and I don't have any issues with it
I think they're really a great little unit for the price. But like you said, you've got to get in there and let the wíre push into the weld. If you are too far back, it just bounces off and makes all that spatter.
@@AllStarWeldingSC I guess I mean the "neg" clamp, and where is best to attach w/out getting shocked. I've heard some say the clamp is ACTUALLY positive, and the wire gun is negative. idk. ty
Well, like I tell people, there are several other patterns, and it's good to practice them all. What's good for flat, might not be good for vertical, or overhead, etc. Thanks for the comment, and have a great weekend!
My son got this for me for Christmas. I’ve been talking about getting into welding for a long time and thank God for RUclips. Did this project on my first try? ruclips.net/video/ZCDy2_6xJgY/видео.htmlsi=xfVuwdQsT7dn0vjy
Personally, 16g would be the thinnest I would want to weld with this unit. Just in general, flux-core welds pretty hot. That is because not only does it have to melt the base metal, but also the filler metal, and the flux inside the wire. Most muffler shops use Mig, for the shielding gas for this reason, and the use .023 wire. Now, having said all that, I actually have used this machine to put a muffler on my friends truck. The pipes/muffler fit into each other very snuggly and tight. In that situation, with careful adjustments, it is very possible to weld it up with flux core. Don't try to do the whole thing at one shot. Tack it up, then do several short stitches. Take plenty of time. I would do C shape arcs. Do one, stop, wait for the orange glow to go away, then do another. Perhaps I will do a video showing this process.
I’m a welder too and I must say this welder is awesome!! I’m in Canada so Canadian tire sells a blue model, 3 yr warranty. I have a couple because they’re so
Good!
That's awesome! It's good to hear that from another welder. It's the perfect machine for building handrails on-site. Trying to do gas Mig in the wind doesn't work, and some of this handrail is so thin that stick isn't a good solution either. I don't know much about Canada, but I have heard of a store called Princess Auto?? I think the Century machines are popular up there too
Just bought my Titanium Flux 125 a few hours ago on an Inside Track sale. I haven't welded a day in my life and I'm starting at almost 50 years old. I am so psyched to get started! My goal is to eventually learn TIG as well, but I am in no hurry. I've already got this video saved and will be looking at more. Great stuff man, thank you!
That's awesome! It's never too late to learn something new, you'll have a blast!
Im 84 and just wanted to try and weld some things
here at my home,your video was a Hugh help.I will be coming back for more.😊
@@russellmatthews7895 Let me know if I can help you in any way.
I took Advantage of the harbor freight sale. I bought the 125 welder. I was watching your video and i would stop it go out in the shop a try each one of those welds. I seem to be better at little circles. I'm going to practice each weld in case i need them. I want to practice on the bed of my truck and tach weld metal patches. I know I have to space out my tachs so don't worry about that. Thanks for the video. I'll be back.
That's a great way to practice. Get good at all of them. There will be times when one method is preferred depending on the situation
We're you looking over me at 4:52?...😂... almost returned to Harbour Freight. Greatest tip ever (1/8" stick out)... thank you sir. 😅
Glad it helped. I like to start at 1/2" stickout, but as it starts going, I move it in. When you have a hot puddle going, a short stickout will drive the wire into that hot puddle. A long stickout will just bounce out of it and cause spatter and bad weld joint
Nice video, thank you
Thanks for watching! And thanks for the comment.
I thought number 2 looked the best . Great video, it's helping me to learn to weld, I suck at it, but, slowly getting better.
I think you're right, number 2 was good! Nothing to it but some practice. When I build hand rails on-site, I use a combination of all 4 of those, based on if I'm doing it underneath, on top, on the side, thicknesses.
Love your video ,thank you soo much. I’m learning a lot from you.
Thanks, I really appreciate the support!
Great video. Really helpful. Thanks. Just subscribed
I'm happy you subscribed and hope you enjoy the other videos. I have many videos for you to watch, and more to come. Make sure you click the notification bell, because I give away a lot of stuff and you don't want to miss your chance!
Thanks for doing what you do,and showing me how simple it can be with some practice.id like to build and fix things that Im breaking and bending,I have a racecar and im always looking for somebody to weld bumpers and brackets for me,now I can pick up a welder and start doing it myself.thank you for showing us the tips and tricks..😁💯👍👊
Heck yeah!! You definitely will be in need of welding skills.
Thanks to this channel!!! looks like getting my self one Flux 125.!! And learn a lot. 👍👍👍👍
You will be very happy with it! Hold off on buying one. I'm doing another give-away of one right before Christmas. Maybe you can win it!
@@AllStarWeldingSC ok.. i can wait..Thanks!! 🤗
I will announce the drawing this weekend, and the drawing will be Dec 15. That way UPS can get it to the winner before Christmas!!!
I bought this welder about a year ago bought it as a return from a guy who buys returns welds great
You got a good deal, it's a great little welder!
@AllStarWeldingSC well had it not been for my truck breaking down and having to buy a $200 alternator it would been!
Ugh .. been there. Just when I thought things were going good, my A/C compressor went out. After I recovered from that, boom - water pump.
Jist started practicing welds yesterday. I'm so glad I watched your channel. Now I will try all 4 methods to see what 'fits' me well. Question about eh Titanium......Is the spool spindle suppose to be locked into the welder frame? Lost my operators manuel and don't know for sure.
You want it right enough to where it doesn't come unraveled on its own, but loose enough so that the drive wheels can still pull the wire off. Good luck with your practice. Come back and let us know how it's going
Welded for 25 years for many companies with a Miller 250, the Titanium welder actually impresses me.
I've been very impressed with it too
🙋♂️guilty, I finally snagged 1 for 99.00! I've been debating for the past year to get one or not, they had them on sale for $126.00 awhile back, but by the time I got there they were out of stock.
I like your style of video - no fluff, no bs just down to earth real life experience.
New subscriber hoping to learn all of this new tech stuff, I haven't touch a welder since 1983 (an old lincoln stick welder about the size of a chest freezer, that loved the electric)
Welcome, and thanks for subscribing. Thank you for your comment. I like to keep it simple and get right to it. These videos are harder to do than I thought, but if I help someone it's all worth it. You will enjoy the new welder. Things have come a long way since the old Lincoln Tombstones
Jason, I was one of your very first subscribers, been waiting a while now to see if you’ll do a rig tour, keep up the videos man favorite welding channel on RUclips!
Thank you very much, and I really appreciate your support, I really do. A few others have asked for a rig tour also. I have a few things I want to do to my truck before I do a tour. Hopefully I can get those done over the Winter when the work slows down a bit. When I get that done, I will reach out to you and let you know it's up. Thanks for following along with me. If you have any other suggestions for videos, please let me know. It's sometimes hard to come up with ideas.
Awesome video, thank you very much for sharing your expertise with us (and shout-out 😉)
My pleasure!
I like number 2 weld and you gave me a lot of good advice thank you
Right on! Glad I could help out a little
Wow she did great so happy that you do what you are doing
Thank you. I'm just glad it helps someone.
They got me! I went on my lunch break and got it 😂 no idea how to use it!
WooHoo. Enjoy it. Just play with it and get used to running some beads. It will come to you.
YOU CAN DO IT. 😉👍🏼👏🏼🙏🏼
A lot of good information here. Thank you. I have this machine, and I have had good luck with it. While you were welding, I wished I could have seen that puddle. All of the welds look great. I will try all of them just to see which one works best for me. Thanks again.
Yep, I'm working on a setup to video the welds better. But you can still see my movements if you look at the gun, and my hands. I will keep working on the arc shot. I can shoot through a helmet, but it really messes with the camera, so I have to dive more into the manual settings
Never welded in my life but always wanted to bought this some time back and never looked back, works like a champ and I find myself welding like a champ. I will say though tried welding some muffler pipe and it was a struggle kept burning through so if you feel like making a video showing joe that would be great.
That's awesome! You're a natural. It is a little tough on thin-wall pipe, but with a little more practice, you will get it. Flux core burns really hot. Muffler shops typically use .023 wire, very thin.
To be honest i like all after the bird poop
Just got my 125 yesterday excited to use it.
I hear ya
Nice review Jason, thank you.
Glad you liked it.
all 4 are great
Thanks!
Couldn’t agree with you more buddy, I’m not a welder, but I am mechanically inclined, I had mine dialed in and welding pretty good in no time actually welded a piece of steel on my buddies 3-D laser printer that had broken.😁
That's pretty cool that you were able to fix a part on a 3-D laser printer!
#2..#3...#4...I liked 'em all...
🎸🤠🎸
Right on!! The circles is my favorite
Thank you ❤
Glad you liked it.
Don't forget to enter the drawing. I'm giving one of these away in 5 days!
Welcome to the Titanium Team. I've had two I've used for YEARS. These are absolutely one of the best financial wins you can purchase at HF. These machines perform perfectly - especially concerning their price point. Couple them with high-quality FC wire like Blue Demon and you have VERY little splatter. I've made dozens of tables and projects with these welders. One constructive criticism note for improving on these, you toe portions of the welds are a bit cold. Consider turning it up a smidgen more to blend those a bit better. Otherwise, you're doing great.
Thanks for your comment. Like you, I'm on my 2nd one as well. Got the first one shortly after it came out. They are great for when I need to go on location with it. You don't have to worry about the wind, or lugging around a big tank. You are right about the cold toes. My shop is really old, and some of the wiring/breakers are suspect at best. I was really surprised I was able to do the demo, at those settings, without tripping a breaker. Usually when I'm using this, it's off the generator in my truck, so that's usually not an issue. I was trying to get the demo finished before the breaker tripped. More heat would have helped, and a little more time at the toes to let it melt in. Good catch
@@AllStarWeldingSC Because this little welder puts the power out especially over the same variation of the 'Century' model, it'll take it - if you can give it. So I wired a dedicated 30Amp to the side of my house to run this puppy and it literally won't stop. Well built little Inverter Welder for the price! Cheers.
I did the exact same thing. It keeps spitting out my wire without barking.
I liked the look of number 2. Thanks for this video!
I like #2 too! I think it looks really good. It's probably my most used. But it really depends on the situation.
Yup I got one for 25% off as a member! Now I see that some of you got it for $99… not happy! Glad you guys got the 99 deal ..
Good video… got good info…. Can you do a video on welding sheet metal ( repair on old car) .. the setting !
Also I have seen ( I think) placing the nob on the surface to weld ( not the wire) .. good or not or my eyes need glasses..
Great video plan on keeping it 👍
That $99 sale was for one day only, with a limit of 2. I found out about it the next day, or I would have picked up 2 more. Automotive sheet metal is not best done with flux core. I'm not saying it can't be done, but would be better off using .023 Mig. I will see if I can make a video with flux core. As for your other question, I don't understand what you mean by "knob"
Titanium Flux 125 was my first wire welder is a great machine and tried several brands wire I really like blue demon brand.
Blue Demon is a good one to use, lots of people seem to like that! Brandon Lund and Mike Festiva made great videos comparing different wire.
Next get yourself some forney wire and you'll never go back.
@@robertblackshear8963I've tried the Forney, good wire. But I still prefer Weldcote. Just my preference.
@@AllStarWeldingSCI feel you. I need to try some of that wire as well.
Thanks for the video! I never realized how important stick out was. I like to compare it to a mechanical pencil. If you stick an inch of lead out and try to write with it, it’s hard and the lead will break off. But if you just put an 1/8 or so much easier to control.
Exactly. The wire has to be very close to the work to make it work correctly. That's just about the best analogy I've ever heard. Can I use that? I will use your name in the video when I use it
I’ve got an Omni pro 220 and iiiiiii love mine!!!!!!
I have heard many great things about those. I think Mike Festiva has some good videos about them.
Good video
I'm glad you liked it!
Don't forget to enter the drawing. I'm giving one of these away in 5 days!
2 and 3 are what im going to try. Really like how those turned out. I have to do some welding on my trailer. I got the titanium on the deal of the day sale awhile back but haven't gotten around to using it yet. I haven't welded since shop class about 15 years ago haha. Just came across your channel. Thanks for the tips!
Good luck! I bet you'll do great with your trailer.
Thanks for making this video.
Glad you liked it!
Very nice looking weld ! ❤
Thank you very much!
Thanks all of them look great, I will practice all, i think whip and pause
Let me know which pattern works best for you. I like the circles the most, but it depends on what I'm doing. There is also a C pattern that I didn't talk about.
all of them are good !
Hey, thanks for the video. I just wanted to pick up a small welder that is user friendly for around the farm and weekend warrior projects lol. I have never welded a day in my life and was wondering if this would be a great one to weld trailers tractors and small projects. Thanks All Star welding!
It is a great machine for those types of projects. Just watch the video again and you'll be welding like a pro in no time! Watch the one where the girl came to visit. She was an absolute beginner, and did very well
@@AllStarWeldingSC awesome. I have a horse trailer that needs a tongue repair and that was my inspiration for buying a machine. I will check the video out thanks. If I have any other questions, do you mind if I ask you? Have a good weekend bud!
Best vid thank You!!
Thanks Mike, I'm glad you found it helpful!
Did you see the one from a few days ago, when I had a local girl drop by and welded for her very first time? She did really good.
@@AllStarWeldingSC No I will watch...Thank You
Sir you are very kind. I’m a fan. This is the first video I’ve seen of yours. Class act. Thank you for your work ethic and honesty within this video. What state are you in? Just curious. Thanks!
Thank you for that kind words. I am in South Carolina
@ WS North Carolina here. Not a coincidence. We’re just different in our parts and you can tell it. Nice to make contact sir 👍
Nice to meet a fellow Carolinian, even if you are in that northern part. Haha. You could probably tell it from my accent, huh?
@ haha! I get the “where are you from” all the time with my accent. Yeah, yeah, the northern one. Ha!
I could just tell from the honesty in your personality. You seem like someone that I would enjoy working with. 👍👍
Will this welder weld 3/8 bolt nut to broken exhaust bolts for easy removal on a Dodge 5.7 hemi.
If you turned the setting way up, probably. But your better choice would be a 7018 stick weld
A helpful video.
Thanks Jack! I'm glad you found it helpful! What's your favorite tip so far?
Great video!! Im curious what you recommend for an extension cord and breaker requirements? Thank you!
I use a 10g extension cord. I think it's 50ft. You should consult a cord chart for the proper length/gauge requirements. As for the breaker..... It really wants a 20amp. I my shop, most of my 110v outlets are 15amp. It will trip the 15 if you have the power set to more than 1/2 way. I usually run it off my Vulcan Outlaw, which has 20amp 110v breakers. I can really crank it up with no trouble. My shop is pretty old, so I don't know if the wiring will support 20amp breakers. But again, I don't use it in the shop much, mainly just for these videos. I wish it had the capacity to also run on 240v.
@AllStarWeldingSC perfect thx for the reply!!
Do you have a vid of the theory of how to use these cheap welders, and the why and when you would use the different types of welds? Z vs little e vs out and in?
There are so many variables as to when and why. That's when your expertise and practice will come into play. Instead of practicing just on flat pieces on your work table, change things up a bit. Set some pieces vertically. Hang a piece of the edge of your table, get down on your knees and practice welding underneath it. Practice thinner pieces to thicker pieces. There's really no theory to it. Just practicing and remembering what works and what doesn't.
@@AllStarWeldingSC ty. I'm just spooked of getting shocked.
Flipping awesome videos
Thanks! I really appreciate that. I'm not the fanciest RUclips channel, with fancy sets and lighting. Just a guy doing what he can, with what he's got, trying to help someone. Comments like yours are much appreciated.
Do you have a preferred wire? I have some Vulcan .030 and just ordered some blue demon .030 for body work on my truck/rust repair. Have a lot of years under the helmet and flux core is a little newer to me. Thanks man! Awesome videos
Thanks, I really appreciate the kind words. My #1 go-to wire is Weldcote. .039 in flux core, and .035 in the mig. If you want to see some really good videos about wire, Mike Festiva and Brandon Lund both have a really good wire comparison video, comparing many different types.
@@AllStarWeldingSC I assume that's .030 (not .03*9*) in flux core.
@@AllStarWeldingSC Awesome, good to know, thanks for the input. Definitely subscribed to your channel, you have great content. I’ll keep an eye out for Weldcote
Great video thank you!
Glad you liked it!
I like the fourth weld of the techniques, although it is better to know the other techniques. Thank you.
I usually do 2 & 4 the most. #3 the circles, or little e's, is good when you are trying to join 2 different thicknesses. Do the loop on the thinner.
I am looking at getting me one to try hid you hid any problem with it
No, not at all. It works flawless every time. This is my 2nd one. The first one took a fall off a ladder.
How often does harbor freight have a $99 sale? was that for black Friday? I like the forward and back weld. I want to learn to weld exhaust so i need a good seal.
For exhaust, you'd be better off with the circles. And no, that wasn't black Friday. Just a random day. One day event, announce the day before. Limit of two. I have never seen it at that price, not even for a sale.
How does it compare with the Chicago 125?
Oh wow ... The difference is night and day. The old Chicago is a transformer based machine. It's only settings are High/Low and I/II. Those are only 4 different taps off the transformer. The Titanium is adjustable on power and wire speed. The Titanium is inverter DC based. I remember when the Titanium first came out. I couldn't wait to get my hands on it. After my first try, I was amazed at how different it welds from the Chicago. I gave away the Chicago the next day. Look for my video about the give away. I'm giving away another Titanium, this is the 3rd time. I try to do it about every 3 months. Watch the video, follow the rules, maybe you can win it!
Two more questions:-) When you start, do you have the wire touching the metal or is there a gap like a spark plug? Maybe do a video for use who are trying to use this in a regular home. What is a good set-up? I don't have a nice metal weld table like yours. I have a workmate bench I can use in my backyard? (I have had mine for over a year and never used it, I've wanted to:-) Subscribed:-)
I usually start with a gap. Not very much of a gap though. However, there have been times when I had to start with the wire touching, for various reasons. So I really don't think it matters. As far as your work set up, just be careful when welding in your back yard. Dead grass ignites easily! There is a folding metal welding worktable you can get at Harbor Freight. It's pretty nice. And when you are done, you can fold it up and put it away
What brand and gauge of flux wire did you use in this example?
My go-to Flux wire is Weldcote .030. In fact, I have a video about my wire choice, and why. Check it out!
Great vid. I have the chicago electric flux 125 but when i saw this for 99 bucks i had to do a double take…couldn’t believe the discount and many have said this was much better than the old ce125 i got one! Your video solved a lot of my issues but one thing that’s still an issue is i have the 39 dollar hf shield that i got on sale for 29 but the issue is i still have a hard time seeing my weld puddle. Is it just a matter of swapping out for a better lense rather than a brand new helmet or do i just need to be closer to see?
What shade lens do you have? Is it adjustable? For Flux core, a shade 10 is sufficient
@@AllStarWeldingSC i will take a look at the user manual again but i only saw 2 adjustments. I could adjust sensitivity (when the auto-shade how much light is needed before shade goes dark) and dela (how soon the shade goes dark once the sensor detects brightness)
@@AllStarWeldingSC i just found the knob to adjust the shade. it was on the side of the helmet.
Do you think this can tackle mobile welding jobs such as Rod iron fencing and Handrail repair? I’m thinking about starting a little side hustle doing this. I have my carts just no welder. It’s on sale right now and will probably buy regardless
Yes. I use mine for fence and handrails all the time. Also use it when I need to build a new one on location, as I did today. I have Mig, Tig, and stick in the shop, and I use the Outlaw for stick and to run the Titanium Flux Core out on mobile jobs.
@ oh nice, I have my eye on the outlaw for when it goes on sale. I want to make a little money with the buzz box first before I upgrade. And when you use that mobile, do you plug in to the home owners power or do you use a generator?
Wrought-iron
I have a inverter stick welder and have been working on an old motorcycle muffler system. Even bringing it down to ~45 amps with 1/16", 6013 rods, reversed electrode, it still burns through way too easily. The oem tube thickness is about .050" metal, the replacement pieces I'm trying to add is 16 GA. Would this welder be a big improvement?
This would definitely be a great improvement for thinner metal like that.
I like #2 weld
Thanks. I did too
I have this welder and still have a problem with seeking the weld. I like all 4 of the styles and will be trying them. Great video.
Thanks for your comment. Keep practicing!
Might be a good idea to explain the different types of flux core wire. E71T-GS, E71T-11, etc. Most people would t know the difference between them and their purpose.
Yeah, that's a good idea. Thanks!
Great video, Newbie question, why won't i get an electric shock? There is High amperage going through that thing and even with gloves what if I touch the piece?
Good question! I've never really thought about it, but as long as you are not touching the metal with one hand, and the wire with your other hand, then pulling the trigger, you should be good.
And not to mention that it is DC current.
Thank you for the excellent video. Just subbed. Question: Can this welder run on a generator to build corrals with 2 3/8" pipe? Are the welds deep enough for that kind of work? Thank you.
Thanks for the sub, and the question. The nature of Flux core burns pretty hot, and in many cases, it pretty much on par with stick welding. At home with a 15amp circuit, about the highest you can get on this machine is around G-E and 5.5-6 without tripping a breaker. It was the same on my Dad's 3500w inverter generator. But out on a mobile job, I run it off my Vulcan Outlet 6500w generator with absolutely no problem, even when doing 1/4" plate. The Titanium Flux really prefers a 20amp circuit. I would say that if you were using any generator over 5000w that you shouldn't have any trouble building that. For those pipes you could run E-F and 6-7, and will be fine. It would probably be as good as 3/32 6010 rod. I would suggest doing the little circles pattern.
@@AllStarWeldingSC Thanks a million for the great answer.
@@AllStarWeldingSC FYI. I'm picking up a new in box Titanium 125 with helmet for $80 from a gentleman that got it as a gift but he does not weld. I saw an almost new generator on Craigs list, DuroMax 4400, 120/20AMP, 240/30AMP for a really good price, but based on your recommendation it's probably better to get a bigger generator, at least 5000W, right?
Dude, that's a steal on that Titanium. And yes, I would get a bigger generator. My Outlaw is 6500, and handles it perfectly. That 4400 may struggle.
Hey great video !!
What size inverter generator would run this machine easily ?
I've never been really good at reading the labels and figuring out the needs. I run this with no problem off the Vulcan Outlaw, which is 6500watts. But, one time I went to my Dad's house for a little repair. He had one of those quiet inverters from Harbor Freight, I think it's 3500w. It kept tripping the breaker, at not too high of a setting. So use that info, if that helps. Maybe someone with more knowledge about this will chime in.
@allstarwelding have you used this little welder at max settings with the vulcan outlaw? im still on the fence on buying the vulcan outlaw but if it can run this at max then ill probably get it
@@Leo-y6i yes I have. You will like the Outlaw. It's a beast. I also use it for my Primeweld 160 with Flux wire, and my Primeweld MTS-200. And of course for it's stick capabilities. It will also let me weld while my helper runs the grinder or a saw at the same time. I've used it to run lights and weld on night jobs.
@@Leo-y6i I have a few other videos on my channel about the Outlaw too.
This video explains all you need to know about generators and welders. ruclips.net/video/bC4IQRWGj78/видео.htmlfeature=shared
My 125 welder in directions say no extension chord and in your video stated using one. Is it ok as long as you are not far from plug or do u suggest a specific chord size ?
With my 125, I regularly run a 50ft 10g extension cord, and run off a generator (actually the Outlaw). I would say just keep it short and big. 50ft is ok with a 10g, 25ft max with a 12g. I would not suggest a 14g at all.
Hey
I want to make a few burglar bars grills for my windows. Diy. What is the best flux core welder for this project?
Any welder would be fine for that. This Titanium Flux Core machine would be perfect.
Would this work for welding c purlin to pipe for a sheet metal fence?
Yes, with the right settings. Absolutely. Just concentrate the most of your heat on the thicker material, so it doesn't blow out. If it does, let it cool, then just hit it with short blasts to close the hole. Maybe I will make a video about closing gaps and holes with flux core.
@AllStarWeldingSC thank you sir for your quick response. I just got out of work and about to head over to harbor freight and pick one up I was on the fence (no Pun intended) about it
You said wire matters. What wire are you using? I'm brand new to welding. Recently bought a Titanium 125. I'm getting lots of spatter and I'd like to know how to get welds like yours. Obviously decades of experience matters too, but I feel like I should be doing better than I am.
I make it no secret.... I am a huge fan of Weldcote wire. I keep .030 in the Flux machines, and .035 in the mig machines. Other great wires are Blue Demon and Forney. Over the years, I have used every wire you can think of, but I have been on nothing but Weldcote for 3 years. There are a few things you can try to keep spatter at a minimum. Use a higher setting if your material can handle it. More heat will let the wire dig in and melt, instead of bouncing off. Move in on your weld. Keep the tip as close as you can, maybe 1/8 - 1/4. Gets your tip all nasty , but it makes a good weld. If you want, you can get some nozzle dip and stick your tip in it before welding. Use a wire wheel on a angle grinder, before and after welding. And try using an anti-spatter spray. They actually work well. Use real anti-spatter spray, not cooking spray. If you want to see a really good review of over 30 sprays, Fireball Tools made a nice video, but it's 45 minutes long. Mike Festiva and Brandon Lund both have videos comparing the popular brands of Flux core wire. They are worth watching!
@AllStarWeldingSC thanks for a great video & for taking time to reply. I'll try your suggestions & keep practicing!
I was at HF on Tuesday 15 minutes before the doors opened to get one of these. Can't wait to see how the Easy-Flux 125 DC inverter does versus the Chicago Electric flux core AC machine I bought years ago. I'd vote for back and forth (#2 I think) for cosmetics, but it would be cool to cut them in half to see a side view of the penetration. Isn't there some acid or dye you can put on the cut welds to see penetration? Anyways, thanks for posting this!
Oh man, you won't believe the difference. Between the transformer and inverter, it's day and night.
I agree. #2 is usually what I do the most. I will see what I can do about making a cut/etch on the different styles.
I already had one I keep in my shop but when I saw them on sale for 99.00 I bought another to keep on my welding trailer to run off my Vulcan Outlaw.
Right on. I have two already. I heard about the sale too late. But I keep one in the shop, and one in the truck, for the Outlaw
I like the bird poop welds because that's where I'm still at. Those are very pretty weld may be someday I'll get to your level. What are the setting you didn't say in video?
Oh come on, brother. You've got to get away from the bird poop. Haha. Like I said in the video, the key is to use BOTH hands. One hand in the gun, and the other hand to steady or guide the gun. Start with just 1/2” stickout. Once the arc starts, leave your tip the same distance, or even move in just a little. Just guide the tip back and forth and lay that wire into it. You can do this. I promise!! I forgot what my settings were on that video, and I'm sorry I didn't mention it. That was 3/16 or 1/4 plate, so I imagine it was pretty high. Maybe F-7 or so
@@AllStarWeldingSC Thank you very much.
I just watched the video again. All the settings are shown at 5:25. I was using .030 wire. Setting was G-7.5, and 1/4" plate.
@@AllStarWeldingSC Sorry about that. I was so focus on your hand position, movement and recommendation that I didn't read it. Again, I didn't know Ti-125 can weld that pretty. Thanks again.
No worries. I realize in the video, that you can't see the actual weld bead (I'm working on that), but you can see the torch movement and my hand movement. When I'm talking about the back and forth movement, I move to the edge of the previous puddle, then move back to the middle of that puddle, then to the edge, and back to the middle, repeat ...
Does it matter what weilder you have i got a mastercraft havent usedv t yet.we don't have harber freight in canada
No sir. It doesn't matter the brand. Get that machine out and practice with it!
@AllStarWeldingSC thanks for your reply I watched at lot of videos and found yours the best so saved it.
Wow, thanks. I appreciate that 🙏
I have a question I was told the ground cable should be up graded to a heavier one,is this so
My mistake not the cable the clamp on the ground cable.
I not only read the instructions from front to back on every purchase, but I keep the instruction booklet until I get rid of the product (even though it's available online).
That's a great way to make sure you know how to use it! I have a file drawer that is nothing but instruction books. And, on the inside, or on, the book, I record the date I bought it and the receipt
All 4
Thanks!
Has anybody done exhaust pipes with this, if so what stick..? Not talking stainless just stock exhaust pipes/muffler connections
I'm sure it could be done. I've done some really thin stuff with it before. I am sure that it can be done.
Thank you, wish we could see the puddle
Yeah. I'm working on that. When I shoot through a lens, my camera goes nuts. But I'm working on it. You can basically see my movements if you look at my hands and the gun
I'm like you, I run in tight. I've been welding for a few decades and I have one of those little machines in my shop as well as my bigger commercial machines and I don't have any issues with it
I think they're really a great little unit for the price. But like you said, you've got to get in there and let the wíre push into the weld. If you are too far back, it just bounces off and makes all that spatter.
Wish you had explained how and why to clamp to a piece of metal. I don't understand the theory. ty tho.
I really don't understand what you are asking. Can you explain further? I would like to help you.
@@AllStarWeldingSC I guess I mean the "neg" clamp, and where is best to attach w/out getting shocked. I've heard some say the clamp is ACTUALLY positive, and the wire gun is negative. idk. ty
i like number 3
Yes, #3 is great for joining different thicknesses. So the upper loop on the thinner. #2 is good for deeper penetration
4 is better but there all good
Well, like I tell people, there are several other patterns, and it's good to practice them all. What's good for flat, might not be good for vertical, or overhead, etc. Thanks for the comment, and have a great weekend!
@@AllStarWeldingSC Yes i had 6 month welding class but with stick and learned a little mig and tig
#2
Me too!
2
My son got this for me for Christmas. I’ve been talking about getting into welding for a long time and thank God for RUclips. Did this project on my first try? ruclips.net/video/ZCDy2_6xJgY/видео.htmlsi=xfVuwdQsT7dn0vjy
Very nice! I enjoyed watching that. Have you tried TIG on these projects?
How does this welds a sheet metal ???( mufler thin mettal)
Personally, 16g would be the thinnest I would want to weld with this unit. Just in general, flux-core welds pretty hot. That is because not only does it have to melt the base metal, but also the filler metal, and the flux inside the wire. Most muffler shops use Mig, for the shielding gas for this reason, and the use .023 wire. Now, having said all that, I actually have used this machine to put a muffler on my friends truck. The pipes/muffler fit into each other very snuggly and tight. In that situation, with careful adjustments, it is very possible to weld it up with flux core. Don't try to do the whole thing at one shot. Tack it up, then do several short stitches. Take plenty of time. I would do C shape arcs. Do one, stop, wait for the orange glow to go away, then do another. Perhaps I will do a video showing this process.