I had untold problems seeing my welds regardless of whether it was mig, tig or ark when I built my new home workshop. I changed lenses, I changed helmets and couldn’t figure out what was causing my problems since I retired. After more than 6 months of giving up, I had an idea which resolved my problem. I had an ex-hospital stand for drip feed bottles on wheels and mounted some LED lights shining onto my weld seams. It worked. Months of frustration, and it all came down to a lack of light. I thought I had ample light in my workshop, but I was wrong .So, I suggest, if you are having this problem, take your project outdoors with the sun shining across you project from either side of you, if you can now see your welds, then your problem is a lack of light at the work site I hope this helps someone, thank you.
I'm a noob welder and soon found I could not see my welds. The sharp light from a LED worklamp fixed it, need a good way to mount it, this is a good idea
Totally agree and great idea. Us oldies need all the help we can get. You can have all the skill but if you can’t see what you’re doing, it’ll look like an amateur did it.
I'm right there with you. Sometimes I can make a beautiful bead then next it looks like pigeon shit. I'm looking for ways to make every weld look right.
I would add one more tip... when welding where the sun is shining from behind you then the light coming in from the back of your helmet can degrade your vision. Having a dark cloth that you can put over say the top of the helmet down over the back of your head to keep your eyes in the dark helps also. My father-in-law was a pipe welder in the oil field and work a helmet that had built in goggles to keep out the sun.
Black Stallion a welding supplier makes a bib to clip under your helmet to keep your neck from getting tanned (at odd angles). It can also be used at the top of the helmet to block light. The darker the inside of the helmet the easier it is to see the weld because what is coming through the filter is only about 10 watts so reflection on the inside lens will be brighter than the weld arc itself coming thru the lens. I also like to wear black welding jackets because the green ones also reflect light under the helmet which competes with the weld arc. Awesome video!
I don’t know if anyone else mentioned this. But I got a small aaa flashlight that attaches to the end of my mig. It has helped a lot with it being to dark for me and my old man eyes. Thanks for the tips.
@@ACDesignsGarage I don’t remember the manufacturer but I got it from an Eastwood sale they had set up off site at the Hartford Fairgrounds. It helps my bad, beginner welding a lot because I can put the light where I need it without it it affecting my welding helmet.
At 68 years old I’m going to dabble in hobby welding. Yes I still have my C. Columbus helmet! I think now I’ll modernize. Just came across your video. It’s going to be a huge help. Thanks for your help leading me out of the ‘dark ages’!
Excellent points! I took welding at about 65 years of age and had a rough time welding because I couldn't see the puddle. I finally realize that I had to turn the auto darkening down. Made a huge difference.
Good tips. I started hobby welding a few years ago. I'm nearly 75 so you know the problem with seeing. I have a Hobart 140, so I called Hobart tech support. He suggested getting a Miller Clearlight. It was about $140 or so. Anyway, that was the best investment. Before, I had a hard time even seeing the seam. Now, my welds actually look like I know what I'm doing.
Great tips! When I first started TIG welding, I had trouble seeing. I solved the problem almost 100% by getting a pair of 300 power reading glasses, and getting decent lighting on my work. I was TIG welding architectural copper (Range Hoods, Bar Tops, etc) so my welds were VERY critical. It was extremely easy to ruin a $15-$25k hood or countertop, and once there's a hole, it's pretty much all over!
Sitting here watching and saw you clip the magnifying lens in and cursed that my helmet did not do that, then i thought, wake up feller, you were an aircraft mechanic, go down the shed and make a holder, so i did. Thank You. Took all of 5 minutes. Feel real stupid right now.
I’ve been really struggling to shoot a straight line. I followed two tips replacing the lens protector and adding a headlamp. I tried it with an elastic strap but it kept crushing the mask against my face. Picked up some good 3M Velcro and stuck it under the lens area. Huge difference. Pay a few extra $ and get a rechargeable. Thanks for the tips. Changed my welding life!
Been welding 60 years and believe tips 1 and 2 have made real difference when I discovered them I also discovered that my choice of lenes darkness effect my ability to see TY 4sharing all good tips
I have a few of those oldephi head lamps and never even thought about putting one on my hood. I also have to adjust the auto darkening sensitivity settings everytime I go from grinding back to welding. I'm no expert, but at 50, I took a year of welding, and as a visual learner, I love this video, so thanks.
I have had problems seeing when MIG welding for years, and I would often lay a lovely weld a few millimetres alongside the seam I wanted to weld. My friend who is a welder recommended me to draw a chalk line where you want to weld. It works a treat... Gas welding is my favourite, it so calming and you can see everything so clearly.
Yeah that chalk trick works great!!! I need to do more gas welding, your right its pretty fun. Have you tried welding aluminum gas welding, its tough but a good challenge!!!
Aluminium welding, I've done it, and it works. Henrob torch. Looks like the same one Eastwood sells. It's not tough once you do a few practice welds. But watch a good video first.
I just recently velcroed a light on my hood and made a world of difference, I've always looked backwards as i was dragging, never thought about getting behind and looking forward, learn Something new every day!
Thank you for the excellent videos. I bought a hood today that has an LED light built into it. Haven't used it yet. But they sell them now. Thank you again. I'm a novice by the way. You do great work. Something for me to aspire to. And I'm an old guy. 67 ;)
Working on a custom car .Been using a light or flash light to see where to start my welds , Welding .025 up to 1/8 . Super glued a adjustable LED to the chin area of the hood works fantastic. Yes people you can't see it when welding . You only need it to find your starting point. I'm 76 years old ,Double vision ( see two welding beads at the same time ) 3 1/2 magnifier's. this was a big help.
I don't know if anyone mentions this, 744 comments are a lot to read through, but for the outer lens cover you can get a container of headlight cleaner. A few drops and a couple of wipes later your lens cover is good to go. I recently did change my outer lens cover after a good 3 years of use and cleaning with the headlight cleaner, but the new cover was not too different from using the headlight cleaner. Not all weld helmets have an easy way of changing the lens covers, so I hope this helps someone. I am here watching this video and deciding something I have been curious about. I just turned 55 years old and have always wondered if something as simple as a taped flashlight to my helmet would really help. Watching this video and reading some of the comments cemented that decision for me and I am going to give it a go. Thank you to the video and commenters that suggested this.
Great tips. That Columbus-era visor is exactly what my dad taught me with 45 years ago with an old arc welder! Just now getting back to trying welding again with cheap HF flux core and auto-dark hood. This video helps a lot. Thanks.
I realised that I was a better welder than I thought! So true about direct lighting. I was so discouraged until I accidentally discovered the difference extra light made, I wish more instructional videos would mention extra lighting. The difference in wire quality for FCAW was night and day too. Who knew?
Thanks for this. I started MIG two days ago, ran 20 or so horrible open roots. Today I finally got a good 3G after finding a decent set up and body position.
He claimed a LED torch will improve visibility but only showed the difference when an arc was not struck. It would have to be an extraordinarily high power LED to compete with an arc. I do a lot of light gauge MIG welding. I never could see anything when the arc was on - only the arc. When I got my MIG welder, I got argon/CO2 85/15 mix because that's what the local gas supplier had. Later they got low CO2 mix in and I changed to that. Big improvement in weld penetration control and an increase in the amount of light the arc puts out. Now I can see.
Man this is exactly what I needed! Was welding my 67 beetle frame head patch and realized I wasn’t seeing near what I needed to! Did the light trick and put my cheater trick in and now we arc’in and spark’in right! Thank you, you’re always the best body work teacher!
That first helmet is what I learned to weld with. In 1964! I don't know how long it had been around but it came with a used Gold colored Craftsman that was probably an early to mid 50's AC buzz box. I inherited it in 1999 and used it off and on until 2011 when I sold it when I move out of state. It was extremely heavy.
I’ve always used a large viewing area helmet. Recently, I bought a Vulcan from HF with the large view area, grind mode, auto dark, lots of adjustments, and appears to be very good quality. It also has cheater lenses available. It made a significant difference for me as I can see the puddle and weld path much better. It’s a lot better than the low dollar auto dark I was using, but isn’t a high dollar unit, which is fine because I don’t weld professionally. It is a sweet spot for me. I also use it for plasma cutting which I like. I know lots of people don’t use a helmet for plasma because the arc is largely shielded, but I don’t like to have my eyes exposed to any level of arc process. The helmet adjust perfectly for aluminum and the fit ent adjustments are really good. I’ll add to this that using a t shirt or cloth to the back can work well if you have to weld from a position where sunlight or strong shop lighting is coming in the back. Also, I use a heavy glove on my left hand and a very light mechanic glove on my torch hand which lets me retain my fine motor coordination. In some cases I don’t use a glove on my torch hand, but I try not to do this and expose my skin to the UV.
Thanks for this. I just welded for the first time at the Oshkosh Airventure fly-in/show at the Lincoln Electric workshop. I did lousy. I kept telling the guy that I couldn't see the weld, but he didn't give me any help with that. I took doing poorly as a challenge so I bought a Lincoln welder, and figured that practice would help. I didn't realize that not being able to see the weld was a thing. I will put your suggestions into practice and see what happens.
I always wanted to add lighting in the welding job partly due to my eyesight, but was told don’t do this funny things until I saw your video. Thank you man
I used that old 2 inch by 5 inch welding hood from 1966 to 1990, started out with a shade 12 lens , and later to a shade 10 lens. Usually welding 5 to 6 hours a day, other time spent on fabrication. Never used a big lens hood, but never had a problem seeing the weld, Stick, Mig, or Tig.
I welded with one of those 'antique' shields for most of my life. Never had any real complaints but I never could see the arc through a #10 lens in those. I always ended up going lighter, down to a #7 or #8. The best newer helmet I found is the blue flame model from HF. I had four high dollar helmets and every one of them died over time. I also am not always a fan of the larger lens. I find things moving in my peripheral vision distracting while I'm welding and if outdoors or with bright light to my back, they're super hard to see out of unless I block off all rear light access around the back.
Yeah those fixed lens are great also. In the fabrication world of alot of spot welding I find the auto dark the best for that. The right tool for the right job I guess!!!
You are right on, all issues I have faced while welding. I have a Jackson welding hood and I did pay more for the wider viewing lens, the grind mode and shade settings are on the lens, not wired to the hood, this makes it much easier to change the outer protective lenses because it comes right out of the hood. I'd be wary of a yeswelder hood, I bought one before and had to send it back because the lens was defective. I have a Deko I've been using at home for a few years now, got it for around $60. I bought one of those braun rechargeable lights from harbor freight when it was on sale. It has a magnetic base and the light can swivel and turn, so it's very handy for dark places. Good job on the video.
............................. Great tips. I have had all the issues described here. Always wondered if it was just my eyes going south. I tried these tips. Man------- what a difference. And yes, I am guilty of owning the first type of helmet. Used them for many years. Got used to them. When it finally fell apart, I bought one of the newer styles. I was shocked by the difference..!
My problem was CONTRAST. My eyes are not standard and can't deal with high contrast. The arc triggers my eyes to shut down the amount of incoming light and I can't see anything else than the arc. I fixed my problem by installing a high intensity flashlight (5000 lumens) over my helmet with an adjustable focus to concentrate the light into a 5 inch circle around the arc. I can see the puddle now but an even stronger light would be welcome.
When I bought my welder a few years ago I bought a Hobart auto darkening helmet. I could not see what i was welding. I played with the settings but no luck. I decided that I must have gotten a defective helmet. I did buy the cheater lens when I bought the helmet but still it was just too dark. Let me get right to the point, something I finally learned (thank goodness) after too many attempts to weld. Take off your auto darkening eyeglasses. They darken when you strike an arc. It is amazing how much better my helmet works since i figured that out.
i weld outboards or call them 5th wheel mounts and brakets that go on a semi.ive never used a 15 degree angle you would be fired a 45,and circles or dimes is good but not for a semi traler you cant come outta root.circles takes you outta root you loose penatration.i like your techniques for home welds.in our industry wetre not aloud e welds u welds we use whips in root only.good video
I've always had a problem where I can see my puddle, but nothing else. So I wander off. I've had to dial down to an 8 to see where I should be welding. Luckily I don't weld a lot. I did find that putting lots of extra lights on the work piece and my helmet help a great deal. I also created a couple of guides to run my nozzle against to keep me on track.
Been getting ready to weld some 1980's Nissan pickup (paper thin) sheet metal.... I'm 67 years old, my first shot at auto body work after 20 years of welding farm equipment... Great Tips!... My lens cover looked like a road map under a spider web.... Tried to hit (👍) four times, but it wouldn't let me...... Thanks.
Great video. I use an older non-auto shield with a 4x6 #9 lens and 300w light stand just above the piece on a bench. This has always worked well for me. Like anything else, over time and with practice, you figure out what works for you.
I've done the same thing with a shop light laid it on the table so I could see to start my arc with a non-auto Darkening helmet Old style shop light with incondescent bulb that's what I used to use been a while since I've done that though I've Have not welded much in years
Thanks for the tips! I've tried all the methods you mentioned, except the headlamp. I just ordered one, and an offer popped up for a second one with an additional $10 off. No brainer! Now I have two coming. I recently picked up the Lincoln flames auto darkening helmet, and it helps a lot, the only problem with it is the adjustment dial. Instead of having a solid click into position switch, it's a rather loose non positive position dial. Yesterday I set it around 9, put my helmet on and when doing so accidently move the dial to grind. I stuck my arc, and about blinded myself. Dammit!!!
Took a stick welding course at the local voke school. For the life of me I could not see what I was doing. I told the instructor. He said the lens was dirty. I cleaned it. Still couldnt see anything. You cant work when you cant see. The course was oriented to young guys that would take a further 200 hour study course to get certified. BIW our local Govt supported shipyard is always looking for certified welders. Since this is a voke school maybe they have a lens at extra dark as a safety measure. Since I have learned carpentry on the way I said to the instructor. Why dont you go build a set of steps when you cant see. Or maybe a piano! That course was a waste of $$$.I think the helmets for that course were the #1 Columbus model. Some of the students had their own helmets. Now I know why you cant see and what to do.
Yeah I understand, Adding a light helped me more than anything. Even if you can add additional flood lights helps alot to. If you have any questions let me know and ill try and help!!!!
I used a regular hood today outside, I couldn't see half of my welds. I usually use a pancake hood, but switching from it to glasses so I can grind and hat on, hat off gets old. Kind of hate the pancake, but it keeps the light out. It's just inconvenient in every other way to use.
When you buy them you have to sand on the wood frame and fit them to your face. Other than that they are light, block out all the light if you fit it well. I fit mine wearing a 3m half mask so the flux core and grinding don't kill me as fast. :) @@ACDesignsGarage
I looked far and wide to find a helmet that could be set down to 6 or 7. That did it for me. All of your ideas are good but the best I found was finding the right tint
My first question when I'm teaching someone to weld is ,"can you see everything in focus through your mask?" If they say it's just a ball of light, that's a problem that's got to be fixed first. You need to be able to see if you're ever going to be a good welder. Magnification may be your best friend.
Funny just tonight I was telling a friend that for me seeing the puddle clearly is the secret to making good welds. First - visual, second - body position, third good lighting. After that getting the right feed speed and only then did I feel in control and with good welds.
I think its one of the major secrets to success of welding, it took me years to figure that. I was worried about everything else lol, thanks for watching!!!!!!
I've heard changing to a lighter shade lens will help too. I think my main problem is I can't see where I'm going. I can be welding and thinking I'm doing pretty good, and I'll stop to take a look, and I've veered off into right field from my weld line.
You can also try to look over top of the weld, some times works .. It can be tough to see sometimes to see. I have used soap stone on the weld line sometimes to see better. Thanks for watching!!!!
Thanks for the tips. I've been playing with TIG and have a heck of a time seeing what the puddle is doing because all I can see is the arc. Now chances are I could tighten up the arc length too... Practice! Thanks again!
In India they use a coathanger with a piece of cardboard. Vey cost effective. Then again their welds are still better that mine with nice equipment. :) Good tips, not seeing well is very difficult.
Enjoyed the video. Today is my first day of owning a small HF welding machine 110v. It feeds from a spool. Where / what do you (all chime in please) recommend I go to start getting basic welding training? For DIY at home, not pro or for a business. So I don't kill myself or damage everything I touch with it. I supposed I can find a beginner's course myself, or keep gleaning from a video here, and a video there, but some recommendations on the best or time tested introduction would be appreciated. Thanks
Congratulations, I have a ton of beginner welding videos under my how to weld playlist, ill drop it below If you have any questions just ask!!! ruclips.net/p/PLly0wFZ3b0EUfw-y66mVLdVwVd8CsHqgZ&si=vxOANjbwxy_C3CJx
I went through 3 Yeswelder helmets before I gave up. They work great for bright (Hi current/volt) welding - Stick and Mig - sure. doing light TIG it wasn't sensitive enough it would shut the dimming off occasionally and I'd get flashed. Save the money and go for a good Lincoln, Miller, ESAB etc. they are just so much better.
I found that getting one or 2 of those spring clamp, aluminum reflector lights and putting the 100-Watt-equivalent LED indoor flood lights in them, works well. Position as required and it helps significantly.
I just put an auto darkening lens in my Jackson. The wire retainer wouldn’t work with the thickness of the new lens. I installed 4 nylon window screen latches to hold it in. It’s better than the OEM wire retainer! Easy to change cover lenses now.
I recycled 2 free lights fastened the two strips of light to each side of the viewing area attached a 9 volt battery and put a push switch on outside near where straps attach , helps a lot
Having the light in front of your helmet (and not behind it) helps a lot. First off, no shadow from your body and head. Secondly if the light is behind you, it gets inside the helmet making it too light to see what is in your lens very well.
I have been a bodyman for around 20 years and almost failed my last certification. The guy running the class threw me his reading glasses and I aced it like always. At only 45 I was too proud to see my eyes were beginning to fail me. A good set of cheaters hide it from all my coworkers!
I had a plastic visor on my motor cycle helmet and I had it for about 5+ years because I cleaned it with beeswax furniture polish as it filled in the cracks (kept the rain off), but at night, eliminated the haze caused by microscopic scratches on the lend.. Not sure it it would work with a welding helmet but cheaper than replacing lenses ?
@@jamesbrucks5266 As far as the Helmet goes, I only ever used soapy water as did read that some chemicals, like those found in stickers, can weaken the helmet. That was decades ago and maybe the helmets materials are less affected today but, you won't know your helmet works until you need it... Respect from the UK.
That was an interesting video. I use a hand held welding shield, as I've found that it's the best for me. My mate bought me a brand new auto darkening hood which I tried to use, but I can't see properly with it because of the yellow tint when it's off. You are sure right about good lighting. I was welding outside in the afternoon and when the light started fading late in the afternoon, I had to pack up and continue the next day, because I couldn't see well enough in the fading light.
Thanks for the tips been having trouble seeing what I'm welding I have a Lincoln 3350 so I don't think it's the hood. I don't feel I get enough contrast. I find myself moving off where I'm trying to weld. I also find light coming around the hood is distracting. I'm going to try spot lighting what I'm welding maybe that will help to define where I want to weld
That will help, the new lens is something that I always over look and also you can turn down your shade if you have a auto dark. I usually weld at a nuber 9 to a 10 if your welding lower amperage. Thanks for watching!!!!!
For scratches in plastic, you can use a wax to fill them. I used to use Turtle wax on my bike helmet shield and it took 99% of the scratches out. I used a liquid wax but a paste wax would probably be better. Put it on and wipe it off. Don't let it dry or you'll be in for a fight. Same with waxing your car. Don't let it dry. I like the disposable shields too.
I will try this thanks. I have an Sean A-60 the lenses are right at 6 dollars a piece for the outer. I use pledge on them before I put them on, the. Everytime I clean it I use pledge and a microfiber clothe. They last longer but still not long enough for the price. Once they get some small scratches in them, I think because of the curvature of the outer lense it really makes things look weird
Mcguires Plastix headlight restorer/ polish works great on the cover lenses as well as the adf. I'm the lead of my shops fab dept. We're a production welding shop. My cover lenses for my helmet are kinda expensive ( Jackson True Sight ). Using the Plastix headlight polish, I can get minimum of 3-4 months out of my cover lenses. The key is, to polish up & down, then side to side. Not in a circular motion
I try to get glass lens they are tough but im not sure how available they are. There a little heavier but you can clean them with lacquer thinner and they dont scratch as easy.
Thanks for tips on welding I been away from it for 15 years Now back at it but lost lot time, and memory, Now I got shield with welder from Harbor freight it's 125 with rosin wire it working well but shield got go hard too see to start welding.
This is my latest video it may help you out. I found a new replacement lens you may be able to put in your old sheild. Check it out below if it will help. ruclips.net/video/WJkzs0z9CkE/видео.html
This is an ongoing challenge for me. My biggest challenge is seeing the joint in the workpiece as I am welding. I think the drag technique may be the answer since I was convinced I had to push all my MIG welds.
Ive watched alot of very knowledgeable guys say that there is not much of a difference between push/ drag. I prefer the drag because I can see better!!
I try to convince people in the comments section of what I have learned along the way, but it's very difficult as they have learned completely differently than myself. I really hope that people learn that there are two ways to go about it; one will lead to blindness, while the other is counterintuitive, as you always have your eyes moving ahead of the puddle, only watching the edge of the molten metal (never the arc). You have a mental picture in your mind of the whole weld, prior to your hood ever going down (or your auto shade lense ever going dark). Your efficiency at this means you never have an "after image" of the arc, stuck in your eyes, from the beginning of your shift till the end of your workday. You then move to a darker shade lense.. and again a darker shade, as by now you no longer even see the light around the weld, just a red center cherry. It will ruin your day if you watch the arc, and if you do it for a living, you will eventually be going down in shade lenses, not up, as you are only losing your eyesight. I would never weld anything with less than an 11 shade lense, and I've been welding for 25 years now, and I never suffer from eyestrain.
Cheater lens is the way to go for me. If I wear any kind of glasses, I get multiple reflections. Also since I wear trifocals, it takes a bit of "back and forth" to get the right step of the lens to use. With the cheater lens, it's THERE !
For me, reflection of ambient light coming in from behind the helmet was a huge problem. Recently I took an old black t-shirt and covered my head + helmet, and was amazed at how much better I could see the weld and path I wanted to take. Now I just need need to get some thin leather, to snap to the helmet, and rig up some sort of filtered positive air to blow into the helmet to stop fogging.
I use “Led Lenser” brand head lamps. They come with a helmet mount you just stick on your welding mask. I put them on my grinding masks too. I use them for everything. Hate the magnetic charger cords though. Always get metal bits in them you need to clean out.
All good tips. The problem I have, which nobody else seems to mention in all these videos, is the workshop is so well lit with big LED overhead lights that in certain positions I can't see my welds because of light shining on the inside of the hood lens, so I have to turn some of the lights off. I think the solution is going to be attaching some flameproof cloth to the back of the helmet. I wonder if more expensive hoods have a better shape to stop this problem.
Thats a good idea, I actually use a piece of a old welding coat over my helmet when filming arc shots with my phone because of the glare. I should of add that in the video. Thanks for watching!!!!
You are not the only person with this problem. Light entering from behind is a huge problem, and in my case it was compounded by a white safety sticker the manufacturer applied to the inside of my helmet. That went away immediately. A friend gave me a worn-out leather jacket - from the 1950s, no less - and I cut the back out and attached it to my helmet with those metal spring clips used to hold documents together. I like the cable tie idea mentioned here. It helps hugely but does make the helmet hotter … and sometimes contributes to fogging of the darkening lens. What I can’t imagine is how the weld seam is visible when dragging the gun, so I doubt I will be trying that. Even with the leather sheet I can’t always see ahead of the gun.
5 tips on how to fix that problem? I'l give you one. and it works. Get yourself a better helmet. I just got an Optrel helmet... best thing I ever did for my welding!!! The clarity is incredible!!. Swiss made, aint cheap, and worth every dime!
Been welding for more than 30yrs and never had the need for one of them fancy looking helmets/welding hoods whatever you want to call them.... something to keep in mind is to change your clear lenses regularly.... you know those that cover the front and back of your welding lens.... that helps a lot....but if even that dont help you and you still can't see what you are doing....consider a career change....that simple
Just found your channel and this video. Just wanted to give you a big shout out! Thank you and I am now a Subscriber. I have had two strokes of the eye and now have part of the optic never dead in both eyes I am now deemed legally blind. I am trying to finish a project and some of this is being a great help to me in many ways and I plan on watching more of your videos . I have been down and out for some time now but you have helped me lift myself up and think more positively and get up and keep trying. And I am doing better all way round, Thank You sir God Bless
Thank you very much for your kind words. I love hearing that my videos may help and encourage people. Thank you for subscribing and hanging out with me!!! I hope you can get your project finished up soon. I'll be praying for you!!! So glad to hear your doing better. Hope you have a Blessed Day, and welcome to the family!!!!!!!!!!
I have glasses that darken in the sunlight. I found this was a big issue when welding. I can see to weld without my glasses which helped greatly. If you need your glasses to see to weld get another pair that doesn't darken to use for welding.
Realize this is an old video but something I've found with my vision is I am partially color-blind and night-blind. Aside from that, there is a difference in the degree of color-blindness between my eyes, meaning one eye is better for welding than the other one. Explanation, I am right handed and do a bit of flux core welding so generally one would hold the gun in the right hand and move from left to right, so most of the focusing is done by the left eye. However I found that I can see better if I have the gun in my left hand and move from right to left just like a left handed person would do. Its a little awkward and takes time to get used to but it sure makes a difference in visibility
@@ACDesignsGarage Regarding my comment here, I made a video a few days ago explaining this issue and I would appreciate your taking a gander at it or rather just listening to the speech instead of watching in order to avoid nightmares since I usually only appear in public on Halloween 🎃
I been welding 20 yrs the only i got to add is dont be afraid to adj the power setting on your helmet down all the old timers swear it needs to be on 12 i run it from 9.5 to 12 depending on amps and welding type what your looing for is watching the Edge of the weld pool to go solidified you meed to see that especially when wedling vertical
I agree, i was told years ago in school it has to be atleast #12 I use #9 to10 regularly for years. I always say if your eyes start getting tired turn it up a lil.
Hello, Really good tips with being able to see your weld. There was one tip you mentioned that caught my attention and that was "When I MIG weld I drag mine". I always push the weld. I am going to try that technique of dragging. Thank you!
This does not help you to see, if you are blind moving forward or backwards makes no difference. There is no help for this, at least none any one wants to part with
You can always put new protective lens and new shades in the "Christopher Columbus" helmet. I still prefer to use those; don't trust the auto stuff but it's also just what I'm used to. I just did this with mine the other day and didn't realize how scratched and dirty my old ones were (3 pieces: font, back, and shade).
I use to use the fixed shade helmets until I got more into motorsports welding, youll wear out your arm filpping it up and down lol, thanks for watching
I work as a welder. We have speedglas helmets in workplace, but when i need to weld with low amperage i use normal cheap glass welding helmet, i i can see much better edges of weld puddle
i loved the comment about when you hit 40, wjat comment when you mare about to hit double that and, i just loved the idea of the light fitted to the mask illuminating the actual job.
I had untold problems seeing my welds regardless of whether it was mig, tig or ark when I built my new home workshop. I changed lenses, I changed helmets and couldn’t figure out what was causing my problems since I retired. After more than 6 months of giving up, I had an idea which resolved my problem. I had an ex-hospital stand for drip feed bottles on wheels and mounted some LED lights shining onto my weld seams. It worked. Months of frustration, and it all came down to a lack of light. I thought I had ample light in my workshop, but I was wrong .So, I suggest, if you are having this problem, take your project outdoors with the sun shining across you project from either side of you, if you can now see your welds, then your problem is a lack of light at the work site I hope this helps someone, thank you.
Thats a great idea, thanks for sharing!!!!!
I'm a noob welder and soon found I could not see my welds. The sharp light from a LED worklamp fixed it, need a good way to mount it, this is a good idea
I think that's the easiest solution. More light on your work.
Totally agree and great idea. Us oldies need all the help we can get. You can have all the skill but if you can’t see what you’re doing, it’ll look like an amateur did it.
i forgot to take both sides of protective film off Lense cover and failed a weld test. I couldn't see nothing.
I’m 70 and an hobby welder. I bought the best helmet from Harbor and mounted an led headlamp on my helmet and it makes a huge difference for me.
Awesome glad to have you here!! Its amazing what a little extra light will do. I bet that worked well!!!!
That's the ticket. Lots of options for the LED's
I'm right there with you. Sometimes I can make a beautiful bead then next it looks like pigeon shit. I'm looking for ways to make every weld look right.
I would add one more tip... when welding where the sun is shining from behind you then the light coming in from the back of your helmet can degrade your vision. Having a dark cloth that you can put over say the top of the helmet down over the back of your head to keep your eyes in the dark helps also. My father-in-law was a pipe welder in the oil field and work a helmet that had built in goggles to keep out the sun.
I wish id of put that in there, thanks for watching!!!!
I had a piece of black canvas attached with Velcro , it acted as an anti spatter ;)
Your daddy in law probably had a pancake welding hood ...is not a helmet...
Black Stallion a welding supplier makes a bib to clip under your helmet to keep your neck from getting tanned (at odd angles). It can also be used at the top of the helmet to block light. The darker the inside of the helmet the easier it is to see the weld because what is coming through the filter is only about 10 watts so reflection on the inside lens will be brighter than the weld arc itself coming thru the lens. I also like to wear black welding jackets because the green ones also reflect light under the helmet which competes with the weld arc. Awesome video!
Denim makes a good hood cloth, keeps sparks off your back and neck.
I don’t know if anyone else mentioned this. But I got a small aaa flashlight that attaches to the end of my mig. It has helped a lot with it being to dark for me and my old man eyes. Thanks for the tips.
Awesome I didn't know they made them, thanks for the tip!!!
@@ACDesignsGarage I don’t remember the manufacturer but I got it from an Eastwood sale they had set up off site at the Hartford Fairgrounds. It helps my bad, beginner welding a lot because I can put the light where I need it without it it affecting my welding helmet.
Eastwood sales them
At 68 years old I’m going to dabble in hobby welding. Yes I still have my C. Columbus helmet! I think now I’ll modernize. Just came across your video. It’s going to be a huge help. Thanks for your help leading me out of the ‘dark ages’!
Hahaha your welcome, I used those old single shade helmets for years now im spoiled with the new auto dark ones! Thanks for watching!!!!
Years ago I tried my son’s AD helmet. That’s all it took. I had to get my own. 😊
Excellent points! I took welding at about 65 years of age and had a rough time welding because I couldn't see the puddle. I finally realize that I had to turn the auto darkening down. Made a huge difference.
Thanks for watching, yes I use to think I had to weld with a shade 12 and I couldn't see squat. Then turned it down and I could see lol
Get to clean wire
Good tips. I started hobby welding a few years ago. I'm nearly 75 so you know the problem with seeing. I have a Hobart 140, so I called Hobart tech support. He suggested getting a Miller Clearlight. It was about $140 or so. Anyway, that was the best investment. Before, I had a hard time even seeing the seam. Now, my welds actually look like I know what I'm doing.
Awesome thank you!!! Keep on stackin them dimes!!!!!!
Great tips! When I first started TIG welding, I had trouble seeing. I solved the problem almost 100% by getting a pair of 300 power reading glasses, and getting decent lighting on my work.
I was TIG welding architectural copper (Range Hoods, Bar Tops, etc) so my welds were VERY critical. It was extremely easy to ruin a $15-$25k hood or countertop, and once there's a hole, it's pretty much all over!
Wow thats awesome, I couldn't imagine the stress of workin with that copper!!
@@ACDesignsGarage It was fun mostly, but glad I'm now retired after 35 years. I build guitars now. WAY easier!! (client-wise that is!)
Sitting here watching and saw you clip the magnifying lens in and cursed that my helmet did not do that, then i thought, wake up feller, you were an aircraft mechanic, go down the shed and make a holder, so i did. Thank You. Took all of 5 minutes. Feel real stupid right now.
Hahaha awesome, Thank you for watching, Thats a great idea, if you dont have it make it!!!!!
I’ve been really struggling to shoot a straight line. I followed two tips replacing the lens protector and adding a headlamp. I tried it with an elastic strap but it kept crushing the mask against my face. Picked up some good 3M Velcro and stuck it under the lens area. Huge difference. Pay a few extra $ and get a rechargeable. Thanks for the tips. Changed my welding life!
Awesome glad ut helped, yeah the strap can be challenging, great idea on the velcro!!!
Been welding 60 years and believe tips 1 and 2 have made real difference when I discovered them I also discovered that my choice of lenes darkness effect my ability to see TY 4sharing all good tips
Thanks for watching!!!!!
I have a few of those oldephi head lamps and never even thought about putting one on my hood. I also have to adjust the auto darkening sensitivity settings everytime I go from grinding back to welding. I'm no expert, but at 50, I took a year of welding, and as a visual learner, I love this video, so thanks.
Thank you very much, im the same way. I learn faster watching someone.
I have had problems seeing when MIG welding for years, and I would often lay a lovely weld a few millimetres alongside the seam I wanted to weld. My friend who is a welder recommended me to draw a chalk line where you want to weld. It works a treat... Gas welding is my favourite, it so calming and you can see everything so clearly.
Yeah that chalk trick works great!!! I need to do more gas welding, your right its pretty fun. Have you tried welding aluminum gas welding, its tough but a good challenge!!!
@@ACDesignsGarage I made holes in the aluminium when I tried 😂
@chrisparti yeah it tough, I need to try it again on a video lol that would be a funny one!!!
Aluminium welding, I've done it, and it works. Henrob torch. Looks like the same one Eastwood sells.
It's not tough once you do a few practice welds. But watch a good video first.
I just recently velcroed a light on my hood and made a world of difference, I've always looked backwards as i was dragging, never thought about getting behind and looking forward, learn Something new every day!
Awesome, I always try to keep learning!!!!
Thank you for the excellent videos. I bought a hood today that has an LED light built into it. Haven't used it yet. But they sell them now. Thank you again. I'm a novice by the way. You do great work. Something for me to aspire to. And I'm an old guy. 67 ;)
Thank you very much for the kind words! Good luck on your welding adventures!!! Your not old Im 45 and I won't hang out with guys under 60 lol
Working on a custom car .Been using a light or flash light to see where to start my welds , Welding .025 up to 1/8 . Super glued a adjustable LED to the chin area of the hood works fantastic. Yes people you can't see it when welding . You only need it to find your starting point. I'm 76 years old ,Double vision ( see two welding beads at the same time ) 3 1/2 magnifier's. this was a big help.
Awesome thank you for watching!!!
I don't know if anyone mentions this, 744 comments are a lot to read through, but for the outer lens cover you can get a container of headlight cleaner. A few drops and a couple of wipes later your lens cover is good to go. I recently did change my outer lens cover after a good 3 years of use and cleaning with the headlight cleaner, but the new cover was not too different from using the headlight cleaner. Not all weld helmets have an easy way of changing the lens covers, so I hope this helps someone. I am here watching this video and deciding something I have been curious about. I just turned 55 years old and have always wondered if something as simple as a taped flashlight to my helmet would really help. Watching this video and reading some of the comments cemented that decision for me and I am going to give it a go. Thank you to the video and commenters that suggested this.
Great idea I'll have to try this thanks!!
At 75 I have the same problem, plus had melanoma in one eye, now cloudy vision. Thanks for the tips!
Hope it helps, thanks for watching!!
Great tips. That Columbus-era visor is exactly what my dad taught me with 45 years ago with an old arc welder! Just now getting back to trying welding again with cheap HF flux core and auto-dark hood. This video helps a lot. Thanks.
Thank you very much, Thats what I learned to weld with then I went to the dark side of autodark lol have a Blessed day!!!!!
I realised that I was a better welder than I thought! So true about direct lighting. I was so discouraged until I accidentally discovered the difference extra light made, I wish more instructional videos would mention extra lighting. The difference in wire quality for FCAW was night and day too. Who knew?
I agree, the more lighting the better!!!
Thanks for this. I started MIG two days ago, ran 20 or so horrible open roots. Today I finally got a good 3G after finding a decent set up and body position.
Awesome!!!!!! Welding is a great tool to have in your arsenal of knowlage!
He claimed a LED torch will improve visibility but only showed the difference when an arc was not struck. It would have to be an extraordinarily high power LED to compete with an arc.
I do a lot of light gauge MIG welding. I never could see anything when the arc was on - only the arc. When I got my MIG welder, I got argon/CO2 85/15 mix because that's what the local gas supplier had. Later they got low CO2 mix in and I changed to that. Big improvement in weld penetration control and an increase in the amount of light the arc puts out. Now I can see.
Man this is exactly what I needed! Was welding my 67 beetle frame head patch and realized I wasn’t seeing near what I needed to! Did the light trick and put my cheater trick in and now we arc’in and spark’in right! Thank you, you’re always the best body work teacher!
Awesome ,so glad it helped ya, thank you also for the kind words!!! Keep on arcin and sparkin!!!!!
if I wasn't confused enough before, I am totally lost now. no disrespect.
I don't even think a 67 beetle has a frame. what's going on here?
That first helmet is what I learned to weld with. In 1964! I don't know how long it had been around but it came with a used Gold colored Craftsman that was probably an early to mid 50's AC buzz box. I inherited it in 1999 and used it off and on until 2011 when I sold it when I move out of state. It was extremely heavy.
That's what I learned on also. They are very reliable!
The lighted hood is Brilliant !
Thank you, I wish I would have had this years ago!!
I’ve always used a large viewing area helmet. Recently, I bought a Vulcan from HF with the large view area, grind mode, auto dark, lots of adjustments, and appears to be very good quality. It also has cheater lenses available. It made a significant difference for me as I can see the puddle and weld path much better. It’s a lot better than the low dollar auto dark I was using, but isn’t a high dollar unit, which is fine because I don’t weld professionally. It is a sweet spot for me. I also use it for plasma cutting which I like. I know lots of people don’t use a helmet for plasma because the arc is largely shielded, but I don’t like to have my eyes exposed to any level of arc process. The helmet adjust perfectly for aluminum and the fit ent adjustments are really good.
I’ll add to this that using a t shirt or cloth to the back can work well if you have to weld from a position where sunlight or strong shop lighting is coming in the back. Also, I use a heavy glove on my left hand and a very light mechanic glove on my torch hand which lets me retain my fine motor coordination. In some cases I don’t use a glove on my torch hand, but I try not to do this and expose my skin to the UV.
Thanks for watching!!! Ive heard that that Vulcan stuff is pretty good!!!
Thanks for this. I just welded for the first time at the Oshkosh Airventure fly-in/show at the Lincoln Electric workshop. I did lousy. I kept telling the guy that I couldn't see the weld, but he didn't give me any help with that. I took doing poorly as a challenge so I bought a Lincoln welder, and figured that practice would help. I didn't realize that not being able to see the weld was a thing. I will put your suggestions into practice and see what happens.
Man I've always wanted to go to that!!! Yes if you get a welder make sure you can see well and it will make it alot easier!!!!@
I always wanted to add lighting in the welding job partly due to my eyesight, but was told don’t do this funny things until I saw your video. Thank you man
Hahaha thank you very much, yeah try it out it helps a ton!!!
And cleaning the inside and outside of your lens helps a lot.
I agree, thats the most over looked problem on not being able to see!!
I used that old 2 inch by 5 inch welding hood from 1966 to 1990, started out with a shade 12 lens , and later to a shade 10 lens. Usually welding 5 to 6 hours a day, other time spent on fabrication. Never used a big lens hood, but never had a problem seeing the weld, Stick, Mig, or Tig.
They work fine unless your doing 1000 spot welds on a quater pannel then it wears out your arm outting it up and down lol
You just helped me out big time. The light on the helmet is the best idea
Thank you, so glad I could help!!!!
I welded with one of those 'antique' shields for most of my life. Never had any real complaints but I never could see the arc through a #10 lens in those. I always ended up going lighter, down to a #7 or #8.
The best newer helmet I found is the blue flame model from HF. I had four high dollar helmets and every one of them died over time.
I also am not always a fan of the larger lens. I find things moving in my peripheral vision distracting while I'm welding and if outdoors or with bright light to my back, they're super hard to see out of unless I block off all rear light access around the back.
Yeah those fixed lens are great also. In the fabrication world of alot of spot welding I find the auto dark the best for that. The right tool for the right job I guess!!!
You are right on, all issues I have faced while welding. I have a Jackson welding hood and I did pay more for the wider viewing lens, the grind mode and shade settings are on the lens, not wired to the hood, this makes it much easier to change the outer protective lenses because it comes right out of the hood. I'd be wary of a yeswelder hood, I bought one before and had to send it back because the lens was defective. I have a Deko I've been using at home for a few years now, got it for around $60. I bought one of those braun rechargeable lights from harbor freight when it was on sale. It has a magnetic base and the light can swivel and turn, so it's very handy for dark places. Good job on the video.
Thank you, thats awesome, I just bought a lens from truarc and it is awesome and pretty cheap.
I wear a fibre metal pipeliner welding hood with a gold lens. I do a lot of mig and flux core welding and don’t have any issue seeing.
Those gold lens work great! Most of the time in what I do like rust repair your dealing with such low voltage it makes it tough to see.
love your Jesus comments at the end , keep up the good job
Thank you very much God Bless and thanks for watching to the end!!!
............................. Great tips. I have had all the issues described here. Always wondered if it was just my eyes going south. I tried these tips. Man------- what a difference. And yes, I am guilty of owning the first type of helmet. Used them for many years. Got used to them. When it finally fell apart, I bought one of the newer styles. I was shocked by the difference..!
Yes, Im spoiled with the new technology lol. Thank you for watching!!!
My problem was CONTRAST. My eyes are not standard and can't deal with high contrast. The arc triggers my eyes to shut down the amount of incoming light and I can't see anything else than the arc. I fixed my problem by installing a high intensity flashlight (5000 lumens) over my helmet with an adjustable focus to concentrate the light into a 5 inch circle around the arc. I can see the puddle now but an even stronger light would be welcome.
Thank you Ill have to try that. I bet that will help with filming also!!!
When I bought my welder a few years ago I bought a Hobart auto darkening helmet. I could not see what i was welding. I played with the settings but no luck. I decided that I must have gotten a defective helmet. I did buy the cheater lens when I bought the helmet but still it was just too dark. Let me get right to the point, something I finally learned (thank goodness) after too many attempts to weld. Take off your auto darkening eyeglasses. They darken when you strike an arc. It is amazing how much better my helmet works since i figured that out.
Id never thought about that. That is crazy that they darken inside the helmet.
Great tip…..I too never gave this a thought!
Great tips. Rigging the hood for lighting; cheap reading glasses for up close work; and having spare lens handy were the best IMHO. Thanks!
Thank you I appreciate that!!!
i weld outboards or call them 5th wheel mounts and brakets that go on a semi.ive never used a 15 degree angle you would be fired a 45,and circles or dimes is good but not for a semi traler you cant come outta root.circles takes you outta root you loose penatration.i like your techniques for home welds.in our industry wetre not aloud e welds u welds we use whips in root only.good video
I've always had a problem where I can see my puddle, but nothing else. So I wander off. I've had to dial down to an 8 to see where I should be welding. Luckily I don't weld a lot. I did find that putting lots of extra lights on the work piece and my helmet help a great deal. I also created a couple of guides to run my nozzle against to keep me on track.
The extra light and that track is a good idea!!!!
Been getting ready to weld some 1980's Nissan pickup (paper thin) sheet metal.... I'm 67 years old, my first shot at auto body work after 20 years of welding farm equipment... Great Tips!... My lens cover looked like a road map under a spider web.... Tried to hit (👍) four times, but it wouldn't let me...... Thanks.
Hahaha awesome good luck on your project, I have a ton of welding videos on a how to weld play list on my channel!
Great video. I use an older non-auto shield with a 4x6 #9 lens and 300w light stand just above the piece on a bench. This has always worked well for me. Like anything else, over time and with practice, you figure out what works for you.
Thats right use what works for you
Is that seriously 24 in.² of viewable area? That's a heck of a view.
I've done the same thing with a shop light laid it on the table so I could see to start my arc with a non-auto Darkening helmet Old style shop light with incondescent bulb that's what I used to use been a while since I've done that though I've Have not welded much in years
Makes sense. My microelectronics headset has led lights on both sides but I never thought of modding my welding helmet. Easy upgrade!
Yeah you cant beat extra lights!!!
Thanks for the tips! I've tried all the methods you mentioned, except the headlamp.
I just ordered one, and an offer popped up for a second one with an additional $10 off. No brainer!
Now I have two coming.
I recently picked up the Lincoln flames auto darkening helmet, and it helps a lot, the only problem with it is the adjustment dial.
Instead of having a solid click into position switch, it's a rather loose non positive position dial.
Yesterday I set it around 9, put my helmet on and when doing so accidently move the dial to grind.
I stuck my arc, and about blinded myself.
Dammit!!!
Awesome thanks for watching, ive blinded myself alot like that lol
Took a stick welding course at the local voke school. For the life of me I could not see what I was doing. I told the instructor. He said the lens was dirty. I cleaned it. Still couldnt see anything. You cant work when you cant see. The course was oriented to young guys that would take a further 200 hour study course to get certified. BIW our local Govt supported shipyard is always looking for certified welders. Since this is a voke school maybe they have a lens at extra dark as a safety measure. Since I have learned carpentry on the way I said to the instructor. Why dont you go build a set of steps when you cant see. Or maybe a piano! That course was a waste of $$$.I think the helmets for that course were the #1 Columbus model. Some of the students had their own helmets. Now I know why you cant see and what to do.
Yeah I understand, Adding a light helped me more than anything. Even if you can add additional flood lights helps alot to. If you have any questions let me know and ill try and help!!!!
Wow, a brilliant video. Thank God there are subtitles as well!
Lol thank you
I used a regular hood today outside, I couldn't see half of my welds. I usually use a pancake hood, but switching from it to glasses so I can grind and hat on, hat off gets old.
Kind of hate the pancake, but it keeps the light out. It's just inconvenient in every other way to use.
Iv always wanted to try a pancake but haven't yet!
When you buy them you have to sand on the wood frame and fit them to your face. Other than that they are light, block out all the light if you fit it well.
I fit mine wearing a 3m half mask so the flux core and grinding don't kill me as fast. :) @@ACDesignsGarage
I bought that exact light. Cheap and works well. The charge last a while as well. I use it a lot when I’m servicing my truck..
I use the mess out of mine, they work great!!!!!
Thank you! I've always struggled with trying to get light where I'm welding, and the idea of mounting a headlamp on my helmet is brilliant!
It works pretty good, especially under cars!!!
Decent helmet lights are fairly expensive. I wonder if there’s a rig with some sort of lens to protect from spatter.
@Disoldman not sure if you can attach a small strip of thin lexan over it or not.
I looked far and wide to find a helmet that could be set down to 6 or 7. That did it for me. All of your ideas are good but the best I found was finding the right tint
Thank you so glad I could help!!!! Thanks for watching!!!!
My first question when I'm teaching someone to weld is ,"can you see everything in focus through your mask?" If they say it's just a ball of light, that's a problem that's got to be fixed first. You need to be able to see if you're ever going to be a good welder. Magnification may be your best friend.
You are 100% correct, being able to see and being comfortable make all the difference in the world.
Funny just tonight I was telling a friend that for me seeing the puddle clearly is the secret to making good welds. First - visual, second - body position, third good lighting. After that getting the right feed speed and only then did I feel in control and with good welds.
I think its one of the major secrets to success of welding, it took me years to figure that. I was worried about everything else lol, thanks for watching!!!!!!
I've heard changing to a lighter shade lens will help too. I think my main problem is I can't see where I'm going. I can be welding and thinking I'm doing pretty good, and I'll stop to take a look, and I've veered off into right field from my weld line.
You can also try to look over top of the weld, some times works .. It can be tough to see sometimes to see. I have used soap stone on the weld line sometimes to see better. Thanks for watching!!!!
Thanks for the tips. I've been playing with TIG and have a heck of a time seeing what the puddle is doing because all I can see is the arc. Now chances are I could tighten up the arc length too... Practice! Thanks again!
Thank you, you made a valid point keep that arc length tight and it will make a ton of difference 👍
In India they use a coathanger with a piece of cardboard. Vey cost effective. Then again their welds are still better that mine with nice equipment. :) Good tips, not seeing well is very difficult.
Thank you, those guys are amazing with what they do!!!
Enjoyed the video. Today is my first day of owning a small HF welding machine 110v. It feeds from a spool. Where / what do you (all chime in please) recommend I go to start getting basic welding training? For DIY at home, not pro or for a business. So I don't kill myself or damage everything I touch with it. I supposed I can find a beginner's course myself, or keep gleaning from a video here, and a video there, but some recommendations on the best or time tested introduction would be appreciated. Thanks
Congratulations, I have a ton of beginner welding videos under my how to weld playlist, ill drop it below
If you have any questions just ask!!! ruclips.net/p/PLly0wFZ3b0EUfw-y66mVLdVwVd8CsHqgZ&si=vxOANjbwxy_C3CJx
I went through 3 Yeswelder helmets before I gave up. They work great for bright (Hi current/volt) welding - Stick and Mig - sure. doing light TIG it wasn't sensitive enough it would shut the dimming off occasionally and I'd get flashed. Save the money and go for a good Lincoln, Miller, ESAB etc. they are just so much better.
Yea I agree, the low amp stuff is tough on the cheaper hoods.
This guy is right on. Ive been doing the same things for years and they work.
Thank you!!!!!
I found that getting one or 2 of those spring clamp, aluminum reflector lights and putting the 100-Watt-equivalent LED indoor flood lights in them, works well. Position as required and it helps significantly.
Ill agree, I never realized how extra light wold help, youd think the arc was enough lol
I just put an auto darkening lens in my Jackson. The wire retainer wouldn’t work with the thickness of the new lens. I installed 4 nylon window screen latches to hold it in. It’s better than the OEM wire retainer! Easy to change cover lenses now.
Awesome great Tip!!!!!
I recycled 2 free lights fastened the two strips of light to each side of the viewing area attached a 9 volt battery and put a push switch on outside near where straps attach , helps a lot
That's awesome!!!
Miller makes a dual flashligh kit for your infinity as well as other newer Miller hoods. Works 👍 👌
Awesome thanks for the tip!!!
Having the light in front of your helmet (and not behind it) helps a lot. First off, no shadow from your body and head. Secondly if the light is behind you, it gets inside the helmet making it too light to see what is in your lens very well.
Yes I've found out the more light the better!!!
I have been a bodyman for around 20 years and almost failed my last certification. The guy running the class threw me his reading glasses and I aced it like always. At only 45 I was too proud to see my eyes were beginning to fail me. A good set of cheaters hide it from all my coworkers!
Hahaha thats what my back ground is in. I think im gonna need some soon!!!!
I had a plastic visor on my motor cycle helmet and I had it for about 5+ years because I cleaned it with beeswax furniture polish as it filled in the cracks (kept the rain off), but at night, eliminated the haze caused by microscopic scratches on the lend..
Not sure it it would work with a welding helmet but cheaper than replacing lenses ?
Awesome thanks for the tip, I also heard that lemon pledge furniture wax works also, ill try your method!!
@@ACDesignsGarage I am honoured.. Best wishes from the UK. Hope it works for you as well as did my M/C visor:)
@@ClaymateDesigner thank you very much!!!
In a pinch you can use WD40 to clean the smoke off the outside of the lens cover and clean your helmet too.
@@jamesbrucks5266 As far as the Helmet goes, I only ever used soapy water as did read that some chemicals, like those found in stickers, can weaken the helmet.
That was decades ago and maybe the helmets materials are less affected today but, you won't know your helmet works until you need it...
Respect from the UK.
That was an interesting video. I use a hand held welding shield, as I've found that it's the best for me. My mate bought me a brand new auto darkening hood which I tried to use, but I can't see properly with it because of the yellow tint when it's off.
You are sure right about good lighting. I was welding outside in the afternoon and when the light started fading late in the afternoon, I had to pack up and continue the next day, because I couldn't see well enough in the fading light.
Thank you, I welded for years with no extra light, I thought the welder put off enough light but I was wrong lol It makes a ton of difference
Good video, very educational and practical
Thank you very much!!!!!
Thanks for the tips been having trouble seeing what I'm welding I have a Lincoln 3350 so I don't think it's the hood. I don't feel I get enough contrast. I find myself moving off where I'm trying to weld. I also find light coming around the hood is distracting. I'm going to try spot lighting what I'm welding maybe that will help to define where I want to weld
That will help, the new lens is something that I always over look and also you can turn down your shade if you have a auto dark. I usually weld at a nuber 9 to a 10 if your welding lower amperage. Thanks for watching!!!!!
Gotta change lens
For scratches in plastic, you can use a wax to fill them. I used to use Turtle wax on my bike helmet shield and it took 99% of the scratches out. I used a liquid wax but a paste wax would probably be better. Put it on and wipe it off. Don't let it dry or you'll be in for a fight. Same with waxing your car. Don't let it dry. I like the disposable shields too.
Thanks ill have to try that!!!
Meguiars ABS plastic polish works well for me
I will try this thanks. I have an Sean A-60 the lenses are right at 6 dollars a piece for the outer. I use pledge on them before I put them on, the. Everytime I clean it I use pledge and a microfiber clothe. They last longer but still not long enough for the price. Once they get some small scratches in them, I think because of the curvature of the outer lense it really makes things look weird
Mcguires Plastix headlight restorer/ polish works great on the cover lenses as well as the adf. I'm the lead of my shops fab dept. We're a production welding shop. My cover lenses for my helmet are kinda expensive ( Jackson True Sight ). Using the Plastix headlight polish, I can get minimum of 3-4 months out of my cover lenses.
The key is, to polish up & down, then side to side. Not in a circular motion
What things should I add for options regarding prescription saftey glasses? Uv protection, scratch coating and what else would you think?
I try to get glass lens they are tough but im not sure how available they are. There a little heavier but you can clean them with lacquer thinner and they dont scratch as easy.
Also those coatings scratch real easy dont ask how I know lol
Thanks for tips on welding I been away from it for 15 years Now back at it but lost lot time, and memory, Now I got shield with welder from Harbor freight it's 125 with rosin wire it working well but shield got go hard too see to start welding.
This is my latest video it may help you out. I found a new replacement lens you may be able to put in your old sheild. Check it out below if it will help.
ruclips.net/video/WJkzs0z9CkE/видео.html
This is an ongoing challenge for me. My biggest challenge is seeing the joint in the workpiece as I am welding. I think the drag technique may be the answer since I was convinced I had to push all my MIG welds.
Ive watched alot of very knowledgeable guys say that there is not much of a difference between push/ drag. I prefer the drag because I can see better!!
I try to convince people in the comments section of what I have learned along the way, but it's very difficult as they have learned completely differently than myself. I really hope that people learn that there are two ways to go about it; one will lead to blindness, while the other is counterintuitive, as you always have your eyes moving ahead of the puddle, only watching the edge of the molten metal (never the arc). You have a mental picture in your mind of the whole weld, prior to your hood ever going down (or your auto shade lense ever going dark). Your efficiency at this means you never have an "after image" of the arc, stuck in your eyes, from the beginning of your shift till the end of your workday. You then move to a darker shade lense.. and again a darker shade, as by now you no longer even see the light around the weld, just a red center cherry.
It will ruin your day if you watch the arc, and if you do it for a living, you will eventually be going down in shade lenses, not up, as you are only losing your eyesight. I would never weld anything with less than an 11 shade lense, and I've been welding for 25 years now, and I never suffer from eyestrain.
Cheater lens is the way to go for me. If I wear any kind of glasses, I get multiple reflections.
Also since I wear trifocals, it takes a bit of "back and forth" to get the right step of the lens to use.
With the cheater lens, it's THERE !
Also ive heard of people using the cheap reading glasses, but the cheater is the way to go for sure. Thanks for watching!!!!!
love your channel. Just learning to weld. Using flux core. biggest problem so far is seeing the piece.
Thank you very much!! I have a few videos on my channel on leaving to weld flux core, look under my play list on welding, it may help
For me, reflection of ambient light coming in from behind the helmet was a huge problem. Recently I took an old black t-shirt and covered my head + helmet, and was amazed at how much better I could see the weld and path I wanted to take. Now I just need need to get some thin leather, to snap to the helmet, and rig up some sort of filtered positive air to blow into the helmet to stop fogging.
Yeah thats a problem, I need to do that also.
I use “Led Lenser” brand head lamps. They come with a helmet mount you just stick on your welding mask. I put them on my grinding masks too. I use them for everything. Hate the magnetic charger cords though. Always get metal bits in them you need to clean out.
Thanks for the tip, ill have to check them out!!!!!
For some reason, I always had a problem with seeing my puddle, when stick welding but I didn't seem to have the same problem with flux core.
What shade lens are you using?
All good tips. The problem I have, which nobody else seems to mention in all these videos, is the workshop is so well lit with big LED overhead lights that in certain positions I can't see my welds because of light shining on the inside of the hood lens, so I have to turn some of the lights off. I think the solution is going to be attaching some flameproof cloth to the back of the helmet.
I wonder if more expensive hoods have a better shape to stop this problem.
Thats a good idea, I actually use a piece of a old welding coat over my helmet when filming arc shots with my phone because of the glare. I should of add that in the video. Thanks for watching!!!!
I attached a leather sheet to mine with acable ties every 2-3 inches works a treat
Get you a fire resistant hood cape, blocks out a lot of background light
I was expecting this to be in the video. It’s my main issue I think and I could do with adding a piece of silver hide or something.🇬🇧👍
You are not the only person with this problem. Light entering from behind is a huge problem, and in my case it was compounded by a white safety sticker the manufacturer applied to the inside of my helmet. That went away immediately. A friend gave me a worn-out leather jacket - from the 1950s, no less - and I cut the back out and attached it to my helmet with those metal spring clips used to hold documents together. I like the cable tie idea mentioned here. It helps hugely but does make the helmet hotter … and sometimes contributes to fogging of the darkening lens. What I can’t imagine is how the weld seam is visible when dragging the gun, so I doubt I will be trying that. Even with the leather sheet I can’t always see ahead of the gun.
5 tips on how to fix that problem? I'l give you one. and it works. Get yourself a better helmet. I just got an Optrel helmet... best thing I ever did for my welding!!! The clarity is incredible!!. Swiss made, aint cheap, and worth every dime!
I've been eye balling those Cadillac sheilds lol
Been welding for more than 30yrs and never had the need for one of them fancy looking helmets/welding hoods whatever you want to call them.... something to keep in mind is to change your clear lenses regularly.... you know those that cover the front and back of your welding lens.... that helps a lot....but if even that dont help you and you still can't see what you are doing....consider a career change....that simple
Hahaha thats true!!!!
Super useful hints, thank you. I have just had the same problems you describe. Really keen to try the lighting trick.
I was amazed by how much it helped me see. Thanks for watching!
Hi. Excellent video. Please send a link to buy protecting vinyl for the helmet;s front glass. I don;t know how i call these. Thank you
Just found your channel and this video. Just wanted to give you a big shout out! Thank you and I am now a Subscriber. I have had two strokes of the eye and now have part of the optic never dead in both eyes I am now deemed legally blind. I am trying to finish a project and some of this is being a great help to me in many ways and I plan on watching more of your videos . I have been down and out for some time now but you have helped me lift myself up and think more positively and get up and keep trying. And I am doing better all way round, Thank You sir God Bless
Thank you very much for your kind words. I love hearing that my videos may help and encourage people. Thank you for subscribing and hanging out with me!!! I hope you can get your project finished up soon. I'll be praying for you!!! So glad to hear your doing better. Hope you have a Blessed Day, and welcome to the family!!!!!!!!!!
I bought some 3x reading glasses, worked a treat
Awesome thanks for watching!!
That light is nice. Thanks for the video!
Thank you its a good all around light!!!
I have glasses that darken in the sunlight. I found this was a big issue when welding. I can see to weld without my glasses which helped greatly.
If you need your glasses to see to weld get another pair that doesn't darken to use for welding.
Ive heard of people also using reading glasses!!!
Amen, brother! Great information that is often overlooked.
Thank you very much hope you have a Blessed Day!!!!
changing over from flux core to gas did the trick for me, cooler welds, less smoke, less flash.
I agree 100%
Realize this is an old video but something I've found with my vision is I am partially color-blind and night-blind. Aside from that, there is a difference in the degree of color-blindness between my eyes, meaning one eye is better for welding than the other one. Explanation, I am right handed and do a bit of flux core welding so generally one would hold the gun in the right hand and move from left to right, so most of the focusing is done by the left eye. However I found that I can see better if I have the gun in my left hand and move from right to left just like a left handed person would do. Its a little awkward and takes time to get used to but it sure makes a difference in visibility
That's awesome that you have figured a way around this!!!
@@ACDesignsGarage Regarding my comment here, I made a video a few days ago explaining this issue and I would appreciate your taking a gander at it or rather just listening to the speech instead of watching in order to avoid nightmares since I usually only appear in public on Halloween 🎃
Great video. Glad it showed up on my recommended list.
Thank you for watching, hope you got some value out of it!!!!!
Great tips... I use led lights on a stand when I weld. Makes a big differnce when the shop lights are not very bright.
Thank you, ill have to try your trick with the led light also!!!
I been welding 20 yrs the only i got to add is dont be afraid to adj the power setting on your helmet down all the old timers swear it needs to be on 12 i run it from 9.5 to 12 depending on amps and welding type what your looing for is watching the Edge of the weld pool to go solidified you meed to see that especially when wedling vertical
I agree, i was told years ago in school it has to be atleast #12 I use #9 to10 regularly for years. I always say if your eyes start getting tired turn it up a lil.
Hello, Really good tips with being able to see your weld. There was one tip you mentioned that caught my attention and that was "When I MIG weld I drag mine". I always push the weld. I am going to try that technique of dragging. Thank you!
Awesome try the drag you may like it better, its really what your comfortable with!!!
Push gas, drag slag is what I was told but whatever works best for YOU !
This does not help you to see, if you are blind moving forward or backwards makes no difference. There is no help for this, at least none any one wants to part with
This is a great video! Many thanks for making it
Thank you for watching!!!!
@5:46
You absolutely nailed the fact that one must be comfortable in order to achieve best results……
Thank you, it took me a while to realize that but it really helps. Thanks for watching!!!!!!
You can always put new protective lens and new shades in the "Christopher Columbus" helmet. I still prefer to use those; don't trust the auto stuff but it's also just what I'm used to. I just did this with mine the other day and didn't realize how scratched and dirty my old ones were (3 pieces: font, back, and shade).
I use to use the fixed shade helmets until I got more into motorsports welding, youll wear out your arm filpping it up and down lol, thanks for watching
I work as a welder. We have speedglas helmets in workplace, but when i need to weld with low amperage i use normal cheap glass welding helmet, i
i can see much better edges of weld puddle
Awesome tip!!!!!
Any tips on how to prevent the lense from fogging up when it’s a little colder outside?
I've heard like lemon pledge furniture polish will help with that and seals scratches!
Great. I’ll give that a try. 👍
i loved the comment about when you hit 40, wjat comment when you mare about to hit double that and, i just loved the idea of the light fitted to the mask illuminating the actual job.
I hope im still doing this at 80 lol. Thank you and thanks for watching