Thanks for this insight. I had recurrent IE issue with the drum getting overfilled and dripping out of the door. I also had good water pressure into the LG front loader washing machine. Tried everything, even adjusting the pressure switch to limit water intake, no show. Until I removed the front panel and have a closer look at the black air hose connecting the pressure switch, noticed a massive wear and air leakage owing to repeated friction on the drum body. I replaced the hose with exact same length and voila…no more overfilling of the drum, leaks or IE error. Machine washing perfectly now!!!
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
How you do that coz mine machine is showing such problem I don't know what to do water goes into the drum but after few seconds it's stop and shoe IE error
Thank you . I saw what you wrote, and did the same thing. The air pipe was stuck. I just put air inside and it opened. Now working perfectly. Thanks its from your writing.
My IE error was caused by the pressure sensor pipe becoming detached from the pressure sensor. A quick two minute fix, removing the top cover and re-attaching the pipe, which is push fit. Thanks for the video.
Thanks for sharing mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Hi. I have the IE error for a while now on my Wash/Dry LG machine. When setting the machine to Cotton setting, it completes the cycle without any hitch but if I use the other settings even the TLC, it always results to an IE error. What I've noticed is that the tub is being filled up by water perfectly fine but then after about a minute, water drains while the water is filling the tub then it results to an IE error. What could be causing this?
Thanks for sharing. Let me quickly explain the IE error code. This error appears when the machine can't fill up with water in the given time. It could be due to a poor water supply reaching the water valves. Check that the tap and fill hose have water flowing all the way to the valve. You can test this by putting the hose into a bucket and opening the tap to ensure there's enough pressure. Next, you should inspect the filter at the back of the water valve. Sometimes, debris can clog it and restrict water flow into the machine. If everything looks good, the problem might be with the water valves or something else. There could also be an issue with power reaching the water valves. Inspect the wiring from the PCB around the top of the cabinet to the valves. Ensure none of the wires are damaged or worn out. You can do a continuity test at each end of the wire to double-check. Another possible issue is that the pressure switch isn't giving correct information to the PCB, so it doesn't turn on the water valves. I don't have schematics for this machine right now so I can't say anything definite!
Hi there - I have this error and am stumped as to what to do next, can you please help? I have checked the water hose and cleaned the filter at the back. This filter was pretty gritty so I thought that would fix it, but after 2 minutes of a 30 minute cycle, the error code comes back... I don't have the volt meter to check anything else. Any advice on what to do next, or is it time to call a local repairer? Thank you in advance
Is there something behind that small filter that can get clogged up? On hot water comes out at a good rate but when I set it to cold only it barely sprinkles. I can feel the water pressure on the hose attached to the cold tap so water is coming fine thru it (Replaced taps with new ones), cleaned filter, no luck. So i'm guessing there may be something beneath the filter that clogs? Cheers
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. Normally, I would get back to you within 24 hours but I am on my way back from the IFA trade show in Berlin, so it can take more time to respond. Thanks for your understanding. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Hi Mr my washing machine when cycle start after few mins it shows IE error i just checked water filter and clean it and it show now too it show IE at washing cycle first what do you prefer to i do tahnks for helping?!!!
Hi, I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
My LG washer has IE error on screen. I already replaced the new water valve but IE error still appear. I can see water are filling inside the washer’s drum. Is there any suggestion what I need to do? Is anything related to pressure chamber? Maybe the sensor not working?
If the pressure sensor is not sending a reading to the printed circuit board, it might be possible that this erorr is occurring. I would run the diagnostic test and have a look if anything is out of place. Make sure you test both of the water valves
I found my dispenser clogged with minerals. Removed it and the top comes off. I cleaned all the holes with pipe cleaner and vinegar including the tubes the hoses connect to.
Thanks for sharing and I'm glad it helped! It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Can you help me plz i have a problem water goes into the drum with full pressure and it do some cycles but after few seconds it show the error and the buttons of machine aldo dont work what should i do about it its model is DWC_LG1314 Serial no is KW14ZE57200114
Hi, I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thanks for this insight. I had recurrent IE issue with the drum getting overfilled and dripping out of the door. I also had good water pressure into the LG front loader washing machine. Tried everything, even adjusting the pressure switch to limit water intake, no show. Until I removed the front panel and have a closer look at the black air hose connecting the pressure switch, noticed a massive wear and air leakage owing to repeated friction on the drum body. I replaced the hose with exact same length and voila…no more overfilling of the drum, leaks or IE error. Machine washing perfectly now!!!
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
How you do that coz mine machine is showing such problem I don't know what to do water goes into the drum but after few seconds it's stop and shoe IE error
I would love to know also. Same problem exactly. @@AfhjHin
Thank you . I saw what you wrote, and did the same thing. The air pipe was stuck. I just put air inside and it opened. Now working perfectly. Thanks its from your writing.
@zzifnebGreat! You’re welcome.
My IE error was caused by the pressure sensor pipe becoming detached from the pressure sensor. A quick two minute fix, removing the top cover and re-attaching the pipe, which is push fit. Thanks for the video.
Thanks for sharing mate. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Useful information, issue resolved 😊
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Hi. I have the IE error for a while now on my Wash/Dry LG machine. When setting the machine to Cotton setting, it completes the cycle without any hitch but if I use the other settings even the TLC, it always results to an IE error. What I've noticed is that the tub is being filled up by water perfectly fine but then after about a minute, water drains while the water is filling the tub then it results to an IE error.
What could be causing this?
Thanks for sharing. Let me quickly explain the IE error code. This error appears when the machine can't fill up with water in the given time. It could be due to a poor water supply reaching the water valves. Check that the tap and fill hose have water flowing all the way to the valve. You can test this by putting the hose into a bucket and opening the tap to ensure there's enough pressure.
Next, you should inspect the filter at the back of the water valve. Sometimes, debris can clog it and restrict water flow into the machine. If everything looks good, the problem might be with the water valves or something else.
There could also be an issue with power reaching the water valves. Inspect the wiring from the PCB around the top of the cabinet to the valves. Ensure none of the wires are damaged or worn out. You can do a continuity test at each end of the wire to double-check.
Another possible issue is that the pressure switch isn't giving correct information to the PCB, so it doesn't turn on the water valves. I don't have schematics for this machine right now so I can't say anything definite!
Hi there - I have this error and am stumped as to what to do next, can you please help?
I have checked the water hose and cleaned the filter at the back. This filter was pretty gritty so I thought that would fix it, but after 2 minutes of a 30 minute cycle, the error code comes back... I don't have the volt meter to check anything else.
Any advice on what to do next, or is it time to call a local repairer?
Thank you in advance
You have not told me what code you are getting on the Appliance and the model number as well, please
Is there something behind that small filter that can get clogged up? On hot water comes out at a good rate but when I set it to cold only it barely sprinkles. I can feel the water pressure on the hose attached to the cold tap so water is coming fine thru it (Replaced taps with new ones), cleaned filter, no luck. So i'm guessing there may be something beneath the filter that clogs? Cheers
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
Normally, I would get back to you within 24 hours but I am on my way back from the IFA trade show in Berlin, so it can take more time to respond. Thanks for your understanding. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
The small little filter of water has gone inside the washer and I can't find it. What can i do?
Hi Mr my washing machine when cycle start after few mins it shows IE error i just checked water filter and clean it and it show now too it show IE at washing cycle first what do you prefer to i do tahnks for helping?!!!
Hi, I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
My LG washer has IE error on screen. I already replaced the new water valve but IE error still appear. I can see water are filling inside the washer’s drum. Is there any suggestion what I need to do?
Is anything related to pressure chamber? Maybe the sensor not working?
If the pressure sensor is not sending a reading to the printed circuit board, it might be possible that this erorr is occurring. I would run the diagnostic test and have a look if anything is out of place. Make sure you test both of the water valves
I found my dispenser clogged with minerals.
Removed it and the top comes off. I cleaned all the holes with pipe cleaner and vinegar including the tubes the hoses connect to.
Thanks for sharing and I'm glad it helped! It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Can you help me plz i have a problem water goes into the drum with full pressure and it do some cycles but after few seconds it show the error and the buttons of machine aldo dont work what should i do about it its model is DWC_LG1314
Serial no is KW14ZE57200114
Mine gets stuck on spin cycle for a long time
where is 1/e
I have the same code and my washer won't spin
Hi, I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
LG Diswasher IE Error
Error: IE