Wow so glad I found this video. I went from searching for a new washer to ordering this $11 part. This was spot on and I'm back in business. Where can I buy you that beer 😊
Glad I could help mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Being a top loader we replaced dozens of hall sensors and motors on F&P machines due to water damage mainly after bearing failures. Luckily we also had machines with computer failures to salvage good motors from.
That's the great advantage of being in the trade. We've always got the lock up full of spares from old machines. The problem is I'm starting to look like a very big hoarder
Thanks for watching mate. Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Hi, my motor can’t even spin by hand, how do I check if any objects is stuck in between drum and motor as mentioned by you? Managed to opened and removed the hall sensor but now think that might not be the source of the problem. Thanks in advance.
Really glad the video assisted you replacing the sensor may I ask a favour? What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @aesthetify please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Glad it helped! I would love your input on our pole as you enjoyed the video and hopefully got your machine working again. Please give your opinion on this. ruclips.net/user/postUgkx1CErYWp7q7DXV83jC3EEmoJ1C_dmWIG6
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
You're welcome 😊 @mariomhlanga1968 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hi @VM-ku5il thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
I have LG direct drive washing machine with damaged tube (front) and collapsed drum , where can i find part number for drum+tube kit? Washing machine model F14B8QDA
As there are multiple variations of this machine, I'm giving you this link so you can put in your full model number repairpartsteam.co.uk/search?g7=3083356N&suchbg=F14B8QDA&rpt=b5846a951b
Hi @ansariosman204 I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Bonjour je possède un lave linge lg F52590WH 15kg,quand je lance un programme rapide et le tambour ce bloque à la 24 ème minutes ou à d'autres moment du lavage et du rinçage du temps restant,quand j'ai cette erreur,j'ouvre le hublot et je tourne le hublot manuellement. après je referme le hublot et la machine fonctionne très bien,j'ai déjà changé le rotor,le Stator,la tachimetrie,le bandeau de commande avec sélection des programme,j'ai toujours cette panne qui affiche de temps en temps un code défaut LE,je pense que ces la carte de puissance qui déconne.cordialement
Si le moteur a été testé et que vous avez déjà remplacé le capteur à effet Hall, il s'agit probablement d'un problème au niveau de la carte de circuit imprimé. Si la carte de circuit imprimé n'est plus disponible, la meilleure solution est d'en trouver une d'occasion sur des sites d'achat comme eBay. Comme vous êtes en France, je ne sais pas quels sont les sites que vous utilisez là-bas. Vous pouvez essayer de lancer un cycle de test sur votre machine, mais en général, le code d'erreur LE indique un défaut lié au moteur. Vérifiez également la continuité de chaque fil allant de la carte de circuit imprimé au moteur. Parfois, les fils situés au bas de la machine peuvent souffrir de la fatigue du métal et se rompre en interne. Il est donc utile de les inspecter également. Si vous avez besoin de pièces détachées pour cette machine, consultez le lien suivant : www.how-to-repair.com/ Utilisez le numéro de modèle complet et, parfois, le numéro d'identification figurant sur l'étiquette d'identification. Merci, Paul 👍
@@How-to-repair bonjour monsieur,merci beaucoup d'avoir pris le temps de répondre à ma question,j'ai changé le capteur effet hall (tachimetrie) plusieurs fois,j'ai aussi acheté d'occasion un bandeau de commande avec programmateur,j'ai acheté d'occasion un Rotor et stator pour tout tester et le problème reste le même,la machine fonctionne bien mais le tambour ce bloque à plusieurs intervalle dans le cycle du décompte du temps restant du lavage,je pense acheté une machine neuve samsung 18kg,je serai tranquille,si je change la carte électronique de puissance et que j'ai encore des problème,j'aurais dépenser de l'argent pour rien,le mieux ces d'acheter du neuf.merci à vous
@@How-to-repair et si les câbles aurait un soucis à un endroit la machine ne fonctionnerait pas bien alors que moi elle fonctionne très bien,ces juste des blocage de tambour de temps en temps
I’m sure I’ve mentioned before…love the videos n help …but….the absence of “gloves” ..they has some some sharp edges on the casings etc….please..wear gloves pal…
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Good quide for diyers, important if you don't have hall sensor like shown on the video, new versions have it inlegrated with main pcb so you will have to order pcb
That is very useful information and I look forward to exploring inside the machine to see how they have constructed this one. Not too sure if the hall sensor should be incorporated into the PCB as that makes it expensive for customers, but it would stop any leakage problems causing damage to the hall sensor.
Mine is jerking but not spinning. When I open the stator, there was no hall sensor there. I watched one of the videos on RUclips where the technician mentioned that there are some versions of this LG washing machine without hall sensor. It is integrated within the board, then the question here how to fix it
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Glad you enjoyed it. There will be a full playlist of all LG washing machine tutorials. ruclips.net/p/PLnAHZbSarsyHLR4x9XPIS-ZEsheufxm9Y @ahoorapersia4698 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
We've just had the latest machine coming from LG, and there will be a full playlist on all repair tutorials on these LG washing machines ruclips.net/p/PLnAHZbSarsyHLR4x9XPIS-ZEsheufxm9Y
It cant the hall sensor .. my washer started this code after i turn the water pressure down thinming it was to high .. replace the hall sensor .. same code . Found out Le code is water . Not enought water
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
7/16/2024: I followed your video instructions, and I'm glad to say that your guidance was spot on as the solution worked the first time. You made it a very pleasant experience, and the replacement part was less than $10 to resolve the LE error. Getting the tech here just to to diagnose the issue was going to cost $119. Sweat equity did it. Many thanks for the assist! ✌
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Thanks a lot for your comment mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Great to hear that mate👍 Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Glad this helped you. I hope you got your motor or hall sensor fixed. As an ageing appliance engineer, my expertise lies more in the domain of domestic devices than in IT, resulting in a limited understanding of RUclips video optimisation. Consequently, my videos might not reach their full potential due to these IT constraints. Nevertheless, they offer invaluable aid to those who encounter them. Your support in sharing our channel on social media would be immensely valued. By disseminating our content, you enhance our visibility and contribute towards addressing the pressing matter of appliance wastage. In turn, you play a role in averting numerous machines from facing an untimely end in the heavenly scrapheap of appliances. Thanks 👍 Wrinkly hands fix appliances, not algorithms! My videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @michealcotterill170 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Really glad you managed to get your washer up and running again. I take it to you in the US as you ordered from Kenmore. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @debimj4968 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
@@debimj4968 the most important thing is, you've got the machine working and because I'm in the UK we would not have been able to ship to you anyway but really glad everything is up and running
I have a problem with my LG it's a new model lg it doesn't have a hall sensor but it's showing LE error code, what should I do since the model doesn't have sensors pliz?
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Wow so glad I found this video. I went from searching for a new washer to ordering this $11 part. This was spot on and I'm back in business. Where can I buy you that beer 😊
Glad I could help mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Being a top loader we replaced dozens of hall sensors and motors on F&P machines due to water damage mainly after bearing failures. Luckily we also had machines with computer failures to salvage good motors from.
That's the great advantage of being in the trade. We've always got the lock up full of spares from old machines. The problem is I'm starting to look like a very big hoarder
Perfect explanation about the error of LE washing machine LG brand❤
Thanks for watching mate. Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
I so wish you had a branch in the US. Brilliant!
To be honest, the way I feel about my country at the moment, I would quite happily move somewhere
@@How-to-repair I feel your sentiment completely. This election year in the US is going to be particularly nasty.
Ditto
Hi, my motor can’t even spin by hand, how do I check if any objects is stuck in between drum and motor as mentioned by you? Managed to opened and removed the hall sensor but now think that might not be the source of the problem. Thanks in advance.
superb video - think it's fixed ours too (no faults for 9 1/2 years until Hall sensor).
Really glad the video assisted you replacing the sensor may I ask a favour? What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @aesthetify please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Great point, the amount of appliances that get scrapped rather than fixed is a real environmental issue!
VERY CLEAR THANKS
Glad it helped! I would love your input on our pole as you enjoyed the video and hopefully got your machine working again. Please give your opinion on this. ruclips.net/user/postUgkx1CErYWp7q7DXV83jC3EEmoJ1C_dmWIG6
I replaced Hall sensor but my LG wd 10396nd didn ´t work..but I have to say, I´ve learnt something new
Thank you!!! This was a great help.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thanks for your help ❤
You're welcome 😊 @mariomhlanga1968 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Thank you so much 👍🏿
You are very welcome mate, please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Much appreciated 👍🌹
Hi @VM-ku5il thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
I have LG direct drive washing machine with damaged tube (front) and collapsed drum , where can i find part number for drum+tube kit? Washing machine model F14B8QDA
As there are multiple variations of this machine, I'm giving you this link so you can put in your full model number repairpartsteam.co.uk/search?g7=3083356N&suchbg=F14B8QDA&rpt=b5846a951b
@@How-to-repairthx found exact mine as LG F14B8QDA F14B8QDWA.ABWQEUK - is part number on the tube and on the drum somewhere?
How do i set a diagnosis for a washer & dryer combo wd-1256rd
Hi @ansariosman204 I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍
minecdont have hallnsensor but it show LE error how to fix it.can you help me
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
I opened the motor and I cannot see the hall sensor in my WDC1215HSVE
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Bonjour je possède un lave linge lg F52590WH 15kg,quand je lance un programme rapide et le tambour ce bloque à la 24 ème minutes ou à d'autres moment du lavage et du rinçage du temps restant,quand j'ai cette erreur,j'ouvre le hublot et je tourne le hublot manuellement. après je referme le hublot et la machine fonctionne très bien,j'ai déjà changé le rotor,le Stator,la tachimetrie,le bandeau de commande avec sélection des programme,j'ai toujours cette panne qui affiche de temps en temps un code défaut LE,je pense que ces la carte de puissance qui déconne.cordialement
Si le moteur a été testé et que vous avez déjà remplacé le capteur à effet Hall, il s'agit probablement d'un problème au niveau de la carte de circuit imprimé. Si la carte de circuit imprimé n'est plus disponible, la meilleure solution est d'en trouver une d'occasion sur des sites d'achat comme eBay. Comme vous êtes en France, je ne sais pas quels sont les sites que vous utilisez là-bas. Vous pouvez essayer de lancer un cycle de test sur votre machine, mais en général, le code d'erreur LE indique un défaut lié au moteur.
Vérifiez également la continuité de chaque fil allant de la carte de circuit imprimé au moteur. Parfois, les fils situés au bas de la machine peuvent souffrir de la fatigue du métal et se rompre en interne. Il est donc utile de les inspecter également.
Si vous avez besoin de pièces détachées pour cette machine, consultez le lien suivant : www.how-to-repair.com/ Utilisez le numéro de modèle complet et, parfois, le numéro d'identification figurant sur l'étiquette d'identification.
Merci, Paul 👍
@@How-to-repair bonjour monsieur,merci beaucoup d'avoir pris le temps de répondre à ma question,j'ai changé le capteur effet hall (tachimetrie) plusieurs fois,j'ai aussi acheté d'occasion un bandeau de commande avec programmateur,j'ai acheté d'occasion un Rotor et stator pour tout tester et le problème reste le même,la machine fonctionne bien mais le tambour ce bloque à plusieurs intervalle dans le cycle du décompte du temps restant du lavage,je pense acheté une machine neuve samsung 18kg,je serai tranquille,si je change la carte électronique de puissance et que j'ai encore des problème,j'aurais dépenser de l'argent pour rien,le mieux ces d'acheter du neuf.merci à vous
@@How-to-repair et si les câbles aurait un soucis à un endroit la machine ne fonctionnerait pas bien alors que moi elle fonctionne très bien,ces juste des blocage de tambour de temps en temps
Use full
I’m sure I’ve mentioned before…love the videos n help …but….the absence of “gloves” ..they has some some sharp edges on the casings etc….please..wear gloves pal…
:( and I get this 2 weeks after replacing a washer. If I had this back then it would have been better. Oh well.
Hi sir. Plz share your number. I need guidance for my LG front load 8 kg DD motor and haul senor. Best regards from Pakistan 🇵🇰
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Good quide for diyers, important if you don't have hall sensor like shown on the video, new versions have it inlegrated with main pcb so you will have to order pcb
That is very useful information and I look forward to exploring inside the machine to see how they have constructed this one. Not too sure if the hall sensor should be incorporated into the PCB as that makes it expensive for customers, but it would stop any leakage problems causing damage to the hall sensor.
Great info but sad that it creates more waste and expense.
Mine is jerking but not spinning. When I open the stator, there was no hall sensor there. I watched one of the videos on RUclips where the technician mentioned that there are some versions of this LG washing machine without hall sensor. It is integrated within the board, then the question here how to fix it
@@alialajem4680 replace the board
thank you for making this video. very helpful!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thank you sir 🙏🏻👍⚘️
Glad you enjoyed it. There will be a full playlist of all LG washing machine tutorials. ruclips.net/p/PLnAHZbSarsyHLR4x9XPIS-ZEsheufxm9Y @ahoorapersia4698 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
👍👍
We've just had the latest machine coming from LG, and there will be a full playlist on all repair tutorials on these LG washing machines ruclips.net/p/PLnAHZbSarsyHLR4x9XPIS-ZEsheufxm9Y
It cant the hall sensor .. my washer started this code after i turn the water pressure down thinming it was to high .. replace the hall sensor .. same code . Found out Le code is water . Not enought water
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
7/16/2024: I followed your video instructions, and I'm glad to say that your guidance was spot on as the solution worked the first time. You made it a very pleasant experience, and the replacement part was less than $10 to resolve the LE error. Getting the tech here just to to diagnose the issue was going to cost $119. Sweat equity did it. Many thanks for the assist! ✌
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thanks
Thanks a lot for your comment mate. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
$16 Amazon, all fixed
Can that see through model be plumbed in?
No
do you know what the ohm readings SHOULD be on the hall sensor and on which pins to verify it's bad with an ohm check?
The manufacturers do not give me the readings you can only obtain the information that I actually put in the video
I changed the hall sensor no more LE code but it doesn’t reach full spinning speed not even a 400 rpm
That's a new one try going into diagnostic mode and following the procedure as in the video make sure the drum is empty
Ty men❤, you saved me a couple hundert €. Working again🎉
Great to hear that mate👍 Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/
Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thank you so much sir...🎉🎉🎉🎉
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Thanks 👍
Glad this helped you. I hope you got your motor or hall sensor fixed. As an ageing appliance engineer, my expertise lies more in the domain of domestic devices than in IT, resulting in a limited understanding of RUclips video optimisation. Consequently, my videos might not reach their full potential due to these IT constraints.
Nevertheless, they offer invaluable aid to those who encounter them. Your support in sharing our channel on social media would be immensely valued. By disseminating our content, you enhance our visibility and contribute towards addressing the pressing matter of appliance wastage. In turn, you play a role in averting numerous machines from facing an untimely end in the heavenly scrapheap of appliances. Thanks 👍 Wrinkly hands fix appliances, not algorithms! My videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @michealcotterill170 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Thanks for the video. We were able to order the sensor for our Kenmore and fix it because of your video. Great video and very informative.
Really glad you managed to get your washer up and running again. I take it to you in the US as you ordered from Kenmore. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @debimj4968 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair Will do. I tried to get the part through your link, but was unable. Yes I am in the USA.
@@debimj4968 the most important thing is, you've got the machine working and because I'm in the UK we would not have been able to ship to you anyway but really glad everything is up and running
مرحبا..هناك محركات في lg بدون مستشعر قاع فهل يكون الاصلاح بالكارت في هذا العطل؟؟؟
Hi mate, if you are talking about the hall sensor then sometimes these are built-in to the card units we normally just replace the pcb.
@@How-to-repair أشكرك على الرد ❤️👍٠لكن ماوجدت احد يصنع فيديو لإصلاح هذا الرمز lE في الأجهزة المدمجة.فهل يتم اصلاح لوحة التحكم في دائرة المحرك؟؟
I have a problem with my LG it's a new model lg it doesn't have a hall sensor but it's showing LE error code, what should I do since the model doesn't have sensors pliz?
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Spin cycle works fine getting stuck on wash and rinse replaced sensor and motor