Kenmore Washer Fills With Water Then Stops: Free Easy Fix!!! Part 2
HTML-код
- Опубликовано: 12 июн 2024
- Wash machine fills with water then stops this is Part 2 with a FREE EASY FIX on this Kenmore Wash Machine that fills with water then stops.
This fix applies to Kenmore Whirlpool, Maytag, Roper just about any top load wash machine
how to fix a washing machine that is not draining,
Your support is not required or expected but always appreciated. If you are inclined to do so your Subscription, Likes and Comments do help.
** You can Help Support The Joe Z Channel at no cost to you**
For a wide selection of parts, including carburetors, air filters, spark plugs, saw chains, fuel lines/ filters, & more.
Go to Hipa at shrsl.com/457fz AND
Shop At: www.amazon.com/shop/joez
Joe Z is a participant in these Affiliate Programs,
Thank you for your support and using the links provided to make your purchases.
It is a Win/Win!!! And always appreciated!!
For RUclips Creators go to www.tubebuddy.com/joezep54 to get your free version of TubeBuddy. Once you try it let me know how you like it or any questions you may have.
These videos are for family friends & anyone who may find them entertaining or useful Some are just for fun others are “DIY” The DIYs are how I got er done not necessarily how professionals may go about it Although you may find some methods useful Joe Z in no way is giving instructions on how you should go about getting er done Joe Z assumes no liability for property damage or injury incurred as a result of any of the information contained in this video Joe Z always recommends checking owners manual and safe practices when working with engines power tools hand tools lifting tools jack stands electrical equipment blunt instruments chemicals lubricants or any other tools or equipment seen or implied in this video Due to factors beyond my control no information contained in this video shall create any express or implied warranty or guarantee of any particular result Any injury, damage or loss that may result from improper use of these tools equipment or the information contained in this video is the sole responsibility of the user and not Joe Z.
Enjoy & be safe.
Amazon Affiliate Disclosure
Joe Z is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for sites to earn
advertising fees by linking to Amazon.com.
Being a part of this network makes it possible to support the development of this
channel and keep the information free to my loyal viewers.
Thank you for all of your support
Joe Z
FREE EASY FIX!!! Part 2 Kenmore Washer Fills with Water Then Stops Kenmore, #Joe Z, Kenmore, how to fix a washing machine that is not draining, whirlpool, roper, maytag, amana,lid switch, bad connector, washer won’t spin, top load washing machine wont drain, washing machine wont turn on, washing machine wont agitate, washer not agitating, washing machine not working, kitchen aid washer Reclaim Repair Reuse Recycle, easy fix, washer repair ,Kenmore washer not draining or spinning 
Хобби
Sometimes it's hidden in plain sight. Thanks for sharing.
You got that right! The hours I spent & the unnecessary cost of a new controller on something that was begging to be found LOL
Thank you for stopping by.
Stay well, Joe Z
glad you finally got it Joe!
Thank you. It was such an easy fix that I overlooked.
Stay well, Joe Z
If you stick with it sometimes it pans out lol thanks joe👍
This took a lot of sticking with it LOL. If I only knew what I was doing 🙂
Stay well, Joe Z
3:38 It needs a glass or plexiglass lid so we can watch it like that more often.
Maybe a future project? Thank you for stopping by.
Say hi to Carol.
Stay well, Joe Z
I was out of town for long-weekend T-day. The question is, How did that connector com undone? I think I saw some frayed insulation in the bend of wires below the connector; at least two. If there are any, wrap them good with 3M electrical tape. 3M doesn't unwrap as easy as other brands. Maybe see about returning the part you don't need.
Welcome back, hope you had a great trip. As far as how the connector worked its way loose I am not sure. Maybe just the vibrations after all these years or my touching it on a previous repair. I had the part pass the return date, This "simple" repair had me going for awhile. I had to walk away from it a couple of times. I have to learn how to read and understand electrical schematics.
Stay well, Joe Z
@@JOEZEP54 I'd like to suggest wrapping the connector and socket with a cable zip tie. The 18 lb, 0.81" x 4" long size should be thin enough to fit between the wires and thin enough to go behind and around the connector and socket. You may have have to connect two together for the length because 4" is the longest I've seen in this width, but it would be easy to cut and pull if you ever need to pull the plug again.
Even if the socket's plug locking clip is good, it came undone, so this will prevent that. If you don't have any this size, you can buy packs of 100 at Lowe's, Home Depot or most hardware stores. I hope your Thanksgiving was great.
Hello, do you just plugged back in or you replaced it?….. was bracket broken?… how did it come loose?
Thank you for watching and your question.
It was not broken & I just plugged it back in. I do no know how it got loose. Could be years of vibration or maybe I did something to affect it on a previous repair.
@modeman69 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest.
Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining.
Stay safe, Joe Z