For anyone looking to do this, I now have a simple Plug and Play adapter for a cleaner install while you wait for your HMI to be unlocked. harnessdr.com/product/hmi-unlock-adapter/
@@philgamboa2906 if I do the hmi unlock will my backup camara work it doesn't work right now because I added a camara and tailgate handle but nothing happens
Hey Phil I have a question that you might be able to answer for me. I drive a 2016 silverado 2500hd LT it did not come with a backup camara i ordered one and a tailgate handle I connected it and it doesn't work My question is if I have my HMI unlocked will the backup camara work thanks in advance for any help you may provide.
Thank you for all your work and thank you for sharing these videos. I like the switch cluster you installed under the AC controls (with the 2 AUX switches), what's the part number for that? Is it oem or aftermarket?
It is OEM, but one that I customized. I took an OEM 7 panel switch that HDC (Hill Descent Control, Diesel Exhaust Brake, and Running Board control, and replaced the non-existent options with Aux 1 and Aux 2 button caps that were taken from another panel switch. Aux 1 and 2 don't do anything at the moment but will be for future use. :)
So is the hmi what I need for a completely dead screen and my info screen on speedo says audio off. You don't even hear an app select while touching the screen.
I have a 2014 Silverado with a 2.0 hmi. My friend is parting out his truck that has factory navigation 2.5 hmi. Are the hmi interchangeable just plug and play or will I have to program the 2.5 hmi to my truck for it to work.
The him is programmed to the trucks vin number. If you switch them out the truck will not start and go into theft mode and won’t go away even if you change them back. You will have to have some one relearn the system with your vin number . I found a guy online that sells a program that’s a one time use to change the vin# it’s like 100 bucks but I didn’t want to deal with it or if you have a expensive scanner that can change the vin # in the hmi also.
Great video... lots of great knowledge. Where is the video for showing how to move or reassign the backup in motion wires. You talked about buying a harness, but if no harness is purchased, which wires are move from the rear plug?
I need help I bought a 15 siearra and the information center repeats all system are malfunctioning like the steering and trailer brakes and no cruise control
Thanks for the good info! I hope to do this sometime. Is there a way to add CarPlay? Also I got a kit from you a few years ago to upgrade my mirrors from lt to ltz and the kit to make the dim at night function work and they are still working flawlessly!
austin g - Very cool! Yes, there is an upgrade path to gain CarPlay/Android Auto. You likely have the 2.0 HMI now. You’ll need to get an appropriate 2.5 HMI and Radio Module for your truck. Once those items are acquired, they get sent off to www.whiteautoandmedia.com to get programmed for your truck, then (at the same time), can get it Unlocked like shown. There is also a need to update your USB hubs as older USB hubs don’t pass the CP/AA Logic. Email me at sales@harnessdr.com for more info.
Phil I have a question I was wounding if you could answer for me. The WAMS has a new product It's called AutoSync Programmer / Multifunction Tool it plug into OBD. What is your input on this.
Hey just had my HMI unlocked and i was wondering about the camera in motion feature? Do you sell a harness for that or can you tell me which wires I have to switch back by the spare tire? Thanks.
Yes I just did this upgrade and it's great I don't even have all the features that phil has but I still got it all done just in case I wanted to upgrade also a side note once you get your HMI back make sure you undo your battery before you plug it up I did not do that the first time and had to send it back off to get them to reprogram which they were nice enough to do it for free
I have an appt @ a chevy dealer tomorrow they told me to put the screen & the hmi on before i take it in but when i put it on the screen says is theft locked is that what it showns when the hmi is not programmed to the vin #?
I got the 8” screen with both modules from a buddy but it doesn’t work on mine since I have the 4” screen, would they be able to unlock the module that came with the bigger screen to work on my truck? If so, would they be also able to add on the video mode to watch movies from a phone or from a flash drive if you don’t have the DVD/CD player?
All this can be achieved thru the factory developers menu that you can access yourself. There's tons of settings and safety features that you can unlock/change on your own without having to pay someone to do for you. But becareful you can really mess some stuff up if you don't know what you're doing. You can Google everything you need to know.
Hey Phil, do you know if this will also solve the problem with an intermittent screen? I just purchased my 2016 Yukon Denali. While I’m driving the screen will go black sometimes you can still play the music sometimes you cannot, other times the screen freezes and I can’t do anything. This seems to be a common problem and many people include to the blue cable that goes to the HMI box. I’ve wiggled that cable, I’ve also disconnected the cable and reconnected it and the problem persists. This seems to be a very common problem with all three of the GM models, Chevy GMC and Cadillac With the IntelliLink system. Just curious if you know if this will also save those issues as a bonus
I would like to know as well mine is doing the same thing but blacks out over and over again and then turns the radio off after about ten mins until it has another key cycle
Have you had any luck fixing gm trucks with g218 ground issues. Or any ground issue. I lose all electrical in tight super slow turns. Was happening every day. However, I cut out the insulation at the g218 ground studs under the dash, both of them. Also cleaned up my main ground on the chassis. After performing those fixes. My truck went from dying everyday, to about once a week. Maybe I need a new battery ? I checked the ground to the starter. That seems fine.
P Gamboa, been watching your channel for a while. Love the content. You’re the reason I put the Denali cluster in my 17 Silverado via WAMS. I just got the 2020 Denali HD and have some questions. I can’t find much on WAMS from their website, but are they going to be offering any unique features on the new 2020 GM trucks? Also, do you know if the illuminated door handles on the Escalades are still direct fitment on the new 2020 trucks? The new trucks have the unlock buttons too, so I’m assuming those features would finally work as well? Wish there was an easier way to contact you. Thanks for the great content!
Email me at sales@HanressDR.com WAMS is developing things for the 2019 - 1500 trucks and likely the 2020 HD trucks. So stay tuned for that. As for handles, I think those would direct fit. There are differences in the front handles vs the rear handles in terms of wiring (based on the Escalade schematics). I haven't looked at that for 2019 trucks yet to confirm. I would presume the schematics would be the same but haven't confirmed yet.
You can swap all the hardware for the headlight switch, radio controls, HVAC controls. Then upgrading to the 2.5 HMI (appropriate 2016 part #s), you can get all in blue. Blue cluster as well.
hello, Phil. i have a 2016 chevy Silverado and have a opportunity to get a pair of factory side mirrors off of a 2018 gmc stl Sierra. these are power fold, heated, turning signal and puddle lights. i would like to know if they would fit my truck and if so i would like to purchase a harness from you. how can i contact you? Thanks.
If you are 2014-2016, you will need to bypass the HMI in order to start the truck. I have an adapter for $25 if you need one. You can reach me at HarnessDR.com
If you don't have an HMI now, I don't think you can easily add it as your won't have any of the wiring. Trucks without an HMI and different hardware and wiring.
I have a 2015 with a 4” screen & did the 8” screen swap but nothing came on. Would I be able to send in my HMI to get programmed/unlocked or would I have to get a whole new module and send it to get programmed?
If you just plugged it in, it won’t work. I would reach out to WAMS (www.WhiteAutoandMedia.com) on that. They supply the correct hardware and programming to make this PnP. Then you’ll need my IO4 -> IO5/IO6 harness to make the controls work from your steering wheel, cluster, to radio. harnessdr.com/product/io4-io5-io6-radio-upgrade-conversion-harness/
I have a 17. Z71 Ltz 2 would I already have this stuff? I’m not very techy. Also since you’re the man when it comes to upgrades I’m waiting on you to rear air on yours so I can figure how to do it to mine 😉
"rear air" ? What size screen do you have now? The upgrades depend on what HMI you have now. LT2 is a higher than base model trim. So you should have a 2.5 HMI. Take a look at the HMI behind your glove box.
Yes it’s the 2.5 but I don’t have the ability to play dvds. Yes rear air conditioning. They used to have it before the new body styles then discontinued it and brought it back in the 2019.
hmm rear air. well currently in the 14-18s there is air vents under the seats but no vents from the center console. the 19s have this. i would assume some kind of after market console /hack/mod with mod air distribution box that has the vents to run under the console to the back and then a module to control it in the rear . or if you just want vents and control from the main head unit. basically on vehicles with rear air ( such as other GMs ) this is basically how it works. they have vents and tubes/ducting that runs from under the dash/airbox underneath the console to the back of it where there are vents in the back. so you are looking at a modified/different air box that would be compatible with your truck the ducts and wiring/control head. that means the entire dash needs to come out to access the air box. i just had to pull a dash to change an evap on 18 yukon at work ... which means center console had to come out as well. yukons dont have air through the console , they have a rear evap in the passenger rear quarter panel with vents coming from overhead. this is similar with the enclaves and Acadias . the envision does have rear ac coming through the console but that console wouldnt fit the trucks. on the yukons/trucks that has the bose sound system the bose amp is under neath the center console.
Wams told me I could play movies from my phone if it was jailbroken. Any truth to this?? I just received my fully unlocked hmi for my 2016 high country. But I don’t have the video button so I feel as if it didn’t get what I paid for. Anyone can lead me to some answers to these questions?
Android auto does it if you're rooted and have "AAMirror and AAUnlock" installed. AAMirror is an app that does the mirroring and AAUnlock is what manipulates android auto to allow the mirroring. forum.xda-developers.com/android-auto/android-auto-general/mirror-screen-android-auto-disucssion-t3734180
There are many appropriate cluster part#s. Typically, you want to match the year of your truck. See post here. www.gm-trucks.com/forums/topic/190465-denali-cluster-in-slt/page/29/
I been watching your vids for a long time now since I recently got my 18 Silverado and I saw all the mods you've done to yours and I'm excited to get some done !! Would you do a video on how to do a LTZ HEADLIGHT CONVERSION TO A STANDARD LT PLEASE I already did the LTZ taillights and work amazing just need the headlights
Jesus Hernandez - Thanks! LTZ Headlights will Plug Right up to your LT. You’ll get hyperflash that I can correct with adapter harnesses. Email me at sales@harnessdr.com for more info on that. Thanks!
hi Phil hope you see this I have a 2014 I recently bought. I have a 2.0 HMI module if I purchase the 2013+ GM HMI Full feature from WAMS do I need to have a 2.5 HMI to sent that in? Let me know thanks anyone!
You will want to get the correct 2.5 HMI. WAMS can supply you with all you need (it'll be brand new parts, correct parts, and programmed right). www.whiteautoandmedia.com/product/car-play-upgrade-retrofit-kit/
Part number: 23168171 And the eBay listing below: rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=174412983818&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111
Dennis Jones - There is a Bypass Module that can be done, but that only bypasses any restrictions while in drive. Doesn’t provide any of the other features that come with this HMI Unlock. I actually had that eBay module prior to this.
Dennis Jones, what is the link I currently have a 2014 LT with stock factory HMi what features will I get I’m trying to get car play for Apple and mirror play
Here is what I did - I used a USB Cable out of the Black Port of the HMI and went to the Brown Port of the Console. I then used another Cable out of the Green Port of the HMI and went to the "input" of the Front USB Hub. Then using another cable, i used the "output" of the front Hub to a USB Female and that's how my Lightning Cable if fed.
Fonzy Bonzy - ANY modification done to your truck outside of a dealer installed GM product can void warranty IF GM can prove the modification caused the failure you are trying to get replaced/repaired under your warranty. Another example of this is - Say you purchased a GM product and installed it yourself, if that product failed due to faulty installation, GM would likely not cover that time. Hope this helps answer your question.
issue lies in if you have a problem with this module or other module and they go to see what calibration of software is installed and if its not GMs software they can see that and see it has not been programmed by a dealer or authorized user of GM's software/programming and that would void your warranty. same goes if you tune/mod your ecm/tcm or whatever. when you program a module for gm it requires info and sends info to GM regarding vin/ date/ software calibration/ repair order and gives a code that the tech/dealer has to put on the repair order for warranty for gm.
For anyone looking to do this, I now have a simple Plug and Play adapter for a cleaner install while you wait for your HMI to be unlocked. harnessdr.com/product/hmi-unlock-adapter/
hey phil if a 2014 & its a 2.0 hmi module how do i upgrade too the 2.5?
@@saldanajr Reach out to www.WhiteAutoandMedia.com for that. They can supply the hardware and the programming.
@@philgamboa2906 if I do the hmi unlock will my backup camara work it doesn't work right now because I added a camara and tailgate handle but nothing happens
@@wilfredalicea4410 no. The unlock just adds enhancements.
So how would I make this backup camera work
If I wanted to or needed to rather replace my hmi, do I need to have it programmed to my vin or is it plug n play?
Hi, do you have a direct contact for Whiteautoandmedia??
Thank you
I’ve always said there’s never a dumb question until I started reading this comment section 😂
How do you tell if the hmi is bad in a vehicle?
Hey Phil I have a question that you might be able to answer for me. I drive a 2016 silverado 2500hd LT it did not come with a backup camara i ordered one and a tailgate handle I connected it and it doesn't work My question is if I have my HMI unlocked will the backup camara work thanks in advance for any help you may provide.
Thank you for all your work and thank you for sharing these videos.
I like the switch cluster you installed under the AC controls (with the 2 AUX switches), what's the part number for that? Is it oem or aftermarket?
It is OEM, but one that I customized. I took an OEM 7 panel switch that HDC (Hill Descent Control, Diesel Exhaust Brake, and Running Board control, and replaced the non-existent options with Aux 1 and Aux 2 button caps that were taken from another panel switch. Aux 1 and 2 don't do anything at the moment but will be for future use. :)
@@philgamboa2906 VERY nice! I might do that :)
Bro, i want to upgrade my hmi 2.0 gen to 2.5 gen, so i Wonder how Long doe"s it takes to be sent if i bought it in your website
How do I get ahold of one of them harnesses for my rear row camera
So is the hmi what I need for a completely dead screen and my info screen on speedo says audio off. You don't even hear an app select while touching the screen.
How long does it take for them to return the HMI after sending it?
Did you ever get a response for this question?
Phil,
Will the video play sync with the front and rear screen? Thanks for the awesome videos
I have a 2014 Silverado with a 2.0 hmi. My friend is parting out his truck that has factory navigation 2.5 hmi. Are the hmi interchangeable just plug and play or will I have to program the 2.5 hmi to my truck for it to work.
Did you ever get an answer to this? I have the same question
The him is programmed to the trucks vin number. If you switch them out the truck will not start and go into theft mode and won’t go away even if you change them back. You will have to have some one relearn the system with your vin number . I found a guy online that sells a program that’s a one time use to change the vin# it’s like 100 bucks but I didn’t want to deal with it or if you have a expensive scanner that can change the vin # in the hmi also.
Hi Phil im intrested in the wiring harness for the rear camera feature. What is the best way to contact you or order
i dont know why i am watching this. i dont even own a car😥
Great video... lots of great knowledge. Where is the video for showing how to move or reassign the backup in motion wires. You talked about buying a harness, but if no harness is purchased, which wires are move from the rear plug?
harnessdr.com/product/2016-2019-silverado-sierra-reverse-camera-adapter-harness/
harnessdr.com/product/2014-2015-silverado-sierra-reverse-camera-adapter-harness/
I need help I bought a 15 siearra and the information center repeats all system are malfunctioning like the steering and trailer brakes and no cruise control
Too much going on here to begin diagnosing.
Thanks for the good info! I hope to do this sometime. Is there a way to add CarPlay? Also I got a kit from you a few years ago to upgrade my mirrors from lt to ltz and the kit to make the dim at night function work and they are still working flawlessly!
austin g - Very cool! Yes, there is an upgrade path to gain CarPlay/Android Auto. You likely have the 2.0 HMI now. You’ll need to get an appropriate 2.5 HMI and Radio Module for your truck. Once those items are acquired, they get sent off to www.whiteautoandmedia.com to get programmed for your truck, then (at the same time), can get it Unlocked like shown. There is also a need to update your USB hubs as older USB hubs don’t pass the CP/AA Logic. Email me at sales@harnessdr.com for more info.
Phil Gamboa sounds good! Thank you
Hello, i am having problems with my aux input. It plays at a very low volume. Does the hmi control that?
Not sure on that. Could be radio module.
Great update to the stereo
Yes it is!
Phil I have a question I was wounding if you could answer for me. The WAMS has a new product It's called AutoSync Programmer / Multifunction Tool it plug into OBD. What is your input on this.
I'll be reviewing the AutoSync device in the next week or two. I have been using/testing it.
I'm just trying to get my radio to come back on on my 2016 Silverado 😤 black screen but back up camera still works 😞
Could be a failing HMI.
Hey just had my HMI unlocked and i was wondering about the camera in motion feature? Do you sell a harness for that or can you tell me which wires I have to switch back by the spare tire? Thanks.
Yes I just did this upgrade and it's great I don't even have all the features that phil has but I still got it all done just in case I wanted to upgrade also a side note once you get your HMI back make sure you undo your battery before you plug it up I did not do that the first time and had to send it back off to get them to reprogram which they were nice enough to do it for free
Great tip!
How long did it take for you to get the HMI back?
I was already watching your videos
Can you help me out with my order it's so hard to get in contact
I have an appt @ a chevy dealer tomorrow they told me to put the screen & the hmi on before i take it in but when i put it on the screen says is theft locked is that what it showns when the hmi is not programmed to the vin #?
Will this work for 2013 Chevrolet avalanche black diamond edition
cody smyth - Not sure. This only works if you have a 2.5 HMI.
I need to figure out what mines doing keeps going black and coming back randomly
Nicholas Duncan loose cable.. jiggle the plug. Maybe so Dielectric grease?
I’ve tried everything seems like it maybe need reprogramming
that could be a software update if its under warranty take it in, it could be a faulty display or hmi
My 2016 did this and my 18 has just started doing it. Took the 16 in and they did some reprogramming to it. Never did it again.
Going try send my hmi off get reprogrammed
I have a 2014 with small display and it won’t show anything but cd / Bluetooth and radio plays what options do I have
Carlos Johnson - Do you have an HMI now?
I got the 8” screen with both modules from a buddy but it doesn’t work on mine since I have the 4” screen, would they be able to unlock the module that came with the bigger screen to work on my truck? If so, would they be also able to add on the video mode to watch movies from a phone or from a flash drive if you don’t have the DVD/CD player?
What HMI do you have now? Have you looked behind your glove box to see what you've got? It all starts with the HMI.
speaking as a gm tech , i would assume you need to upgrade the screen/display to something like shown here with the compatible hmi with the harness
All this can be achieved thru the factory developers menu that you can access yourself. There's tons of settings and safety features that you can unlock/change on your own without having to pay someone to do for you. But becareful you can really mess some stuff up if you don't know what you're doing. You can Google everything you need to know.
Tried looking it up and couldn't find. Let me know what search terms I should be looking for.
@@philgamboa2906 it's the 2nd search item down.
lmgtfy.com/?q=https%3A%2F%2Fwww.gm-trucks.com%2Fforums%2Ftopic%2F206995-anyone-try-putting-their-infotainment-in-development-mode%2F
Hey Phil, do you know if this will also solve the problem with an intermittent screen? I just purchased my 2016 Yukon Denali. While I’m driving the screen will go black sometimes you can still play the music sometimes you cannot, other times the screen freezes and I can’t do anything. This seems to be a common problem and many people include to the blue cable that goes to the HMI box. I’ve wiggled that cable, I’ve also disconnected the cable and reconnected it and the problem persists. This seems to be a very common problem with all three of the GM models, Chevy GMC and Cadillac With the IntelliLink system. Just curious if you know if this will also save those issues as a bonus
I would like to know as well mine is doing the same thing but blacks out over and over again and then turns the radio off after about ten mins until it has another key cycle
This one is tough to troubleshoot as it can be the HMI or Radio Screen… or wiring.
I have a 06 cadillac DTS, i was wondering if you knew how to play dvd's while driving
D Ramirez - I don’t have any knowledge on vehicles that don’t have this 2.5 Style HMI.
Thanks for the reply. Much appreciated. Its koo.
Have you had any luck fixing gm trucks with g218 ground issues. Or any ground issue. I lose all electrical in tight super slow turns. Was happening every day. However, I cut out the insulation at the g218 ground studs under the dash, both of them. Also cleaned up my main ground on the chassis. After performing those fixes. My truck went from dying everyday, to about once a week. Maybe I need a new battery ? I checked the ground to the starter. That seems fine.
Wow. I haven’t had ground issues. Maybe time to replace battery if the ground likely killed it.
P Gamboa, been watching your channel for a while. Love the content. You’re the reason I put the Denali cluster in my 17 Silverado via WAMS. I just got the 2020 Denali HD and have some questions. I can’t find much on WAMS from their website, but are they going to be offering any unique features on the new 2020 GM trucks? Also, do you know if the illuminated door handles on the Escalades are still direct fitment on the new 2020 trucks? The new trucks have the unlock buttons too, so I’m assuming those features would finally work as well? Wish there was an easier way to contact you. Thanks for the great content!
Email me at sales@HanressDR.com
WAMS is developing things for the 2019 - 1500 trucks and likely the 2020 HD trucks. So stay tuned for that. As for handles, I think those would direct fit. There are differences in the front handles vs the rear handles in terms of wiring (based on the Escalade schematics). I haven't looked at that for 2019 trucks yet to confirm. I would presume the schematics would be the same but haven't confirmed yet.
Good tutorial and information
Thanks! I enjoy the customization :)
Can they fix the hmi box? Screen keeps going gray and dealer says it the hmi box.
They only provide programming services.
Can you access a flash drive without having dvd/ blue capability?
Yes. If you have a 14-16. GM Removed USB playback on USB video playback for 17+. I haven't tried music playback from USB on 17+.
I have a 17 ltz and have been pissed that I can't play vids! Are there upgrades for the 17 hmi as well or any other way to play video?
how can i get an updated hmi that works with an 8 inch screen
Jorge Rentería www.WhiteAutoandMedia.com can help you with that, supply and programming too.
I wanna make my lights on the dash and cluster go from the red color to that bluish color how do I do that
You can swap all the hardware for the headlight switch, radio controls, HVAC controls. Then upgrading to the 2.5 HMI (appropriate 2016 part #s), you can get all in blue. Blue cluster as well.
Phil Gamboa I have 2.5.. any idea on the price range for this
@@jackcabelka5621 - Unlock runs like $199. Check their website out. www.whiteautoandmedia.com
hello, Phil. i have a 2016 chevy Silverado and have a opportunity to get a pair of factory side mirrors off of a 2018 gmc stl Sierra. these are power fold, heated, turning signal and puddle lights. i would like to know if they would fit my truck and if so i would like to purchase a harness from you. how can i contact you? Thanks.
Do u happen to know if this will work on a 2015 suburban with io3? I already bought the 8 “ screen
2016 silvarado the touch screen rarely works. Will unlocking the hmi fix that.
Is there a way to determine the HMI version without removing the device, aside from deductive reasoning?
2014-2015 will have 2.0. Most 2016-2018 will have 2.5. Some 2016 trucks got leftover 2.0 versions.
Where did u get that blue wire from the hmi to the touch sreen?
That was an existing cable.
I got a 2015 GMC sierra what do I have to do to get my HMI unlock ?
Could I just try and find. 2.5 hmi off eBay and plug and play? I've got a 2014 Sierra sle with no nav or Android auto capability
No, its has to be programmed to the vehicle VIN# to be able to communicate with other modules on the network bus
Will my truck still drive without the HMI
If you are 2014-2016, you will need to bypass the HMI in order to start the truck. I have an adapter for $25 if you need one. You can reach me at HarnessDR.com
I have a 2015 Colorado what HMI going to need to get unlocked I.e.part number
Just bought a 2016 ltz and my screen is sensing the touch previous owner said he replaced the screen and still didn’t work now I want to figure it out
Typically a bad screen. If he replaced that, maybe it's a bad HMI.
What would I need to add a hmi box to my truck?
If you don't have an HMI now, I don't think you can easily add it as your won't have any of the wiring. Trucks without an HMI and different hardware and wiring.
Can this add Android Auto if it did not come with my HMI?
Rich L Do you have a 2.5 HMI now?
@@philgamboa2906
Not sure, I'll check it out when I get a chance.
@@philgamboa2906 i had same question, and yes hmi is 2.5
K S if you have a 2.5 HMI and don’t have Android Auto, this will get it updated to include it.
I have a 2015 with a 4” screen & did the 8” screen swap but nothing came on. Would I be able to send in my HMI to get programmed/unlocked or would I have to get a whole new module and send it to get programmed?
If you just plugged it in, it won’t work. I would reach out to WAMS (www.WhiteAutoandMedia.com) on that. They supply the correct hardware and programming to make this PnP. Then you’ll need my IO4 -> IO5/IO6 harness to make the controls work from your steering wheel, cluster, to radio.
harnessdr.com/product/io4-io5-io6-radio-upgrade-conversion-harness/
If I get a 2.5 hmi from a junk yard can I have it unlocked and install it in my truck , my 2016 has a base system
Depends on part #. Reach out to www.WhiteAutoandMedia.com for more info on compatibility and fitment.
I have a 17. Z71 Ltz 2 would I already have this stuff? I’m not very techy. Also since you’re the man when it comes to upgrades I’m waiting on you to rear air on yours so I can figure how to do it to mine 😉
"rear air" ? What size screen do you have now? The upgrades depend on what HMI you have now. LT2 is a higher than base model trim. So you should have a 2.5 HMI. Take a look at the HMI behind your glove box.
Yes it’s the 2.5 but I don’t have the ability to play dvds.
Yes rear air conditioning. They used to have it before the new body styles then discontinued it and brought it back in the 2019.
hmm rear air. well currently in the 14-18s there is air vents under the seats but no vents from the center console. the 19s have this. i would assume some kind of after market console /hack/mod with mod air distribution box that has the vents to run under the console to the back and then a module to control it in the rear . or if you just want vents and control from the main head unit. basically on vehicles with rear air ( such as other GMs ) this is basically how it works. they have vents and tubes/ducting that runs from under the dash/airbox underneath the console to the back of it where there are vents in the back. so you are looking at a modified/different air box that would be compatible with your truck the ducts and wiring/control head. that means the entire dash needs to come out to access the air box.
i just had to pull a dash to change an evap on 18 yukon at work ... which means center console had to come out as well. yukons dont have air through the console , they have a rear evap in the passenger rear quarter panel with vents coming from overhead. this is similar with the enclaves and Acadias . the envision does have rear ac coming through the console but that console wouldnt fit the trucks. on the yukons/trucks that has the bose sound system the bose amp is under neath the center console.
I’m wondering if the older silverados had ducting in the center console. I know they used to have the vents but it wasn’t controlled in the back.
Hey how You fix You problem
Can a 2.5 HMI be programmed on a 2014 silverado lt?
Jorge Samaniega yes. But you have to do a full CarPlay/Android Auto upgrade as well. Radio module and HMI together. Must be part # specific.
@@philgamboa2906 is there a part numbers reference or list somewhere?
Wams told me I could play movies from my phone if it was jailbroken. Any truth to this?? I just received my fully unlocked hmi for my 2016 high country. But I don’t have the video button so I feel as if it didn’t get what I paid for. Anyone can lead me to some answers to these questions?
What was the turn around time
Johnny bravo - About a week once they received it.
Will this also let you mirror a phone?
No
Android auto does it if you're rooted and have "AAMirror and AAUnlock" installed. AAMirror is an app that does the mirroring and AAUnlock is what manipulates android auto to allow the mirroring.
forum.xda-developers.com/android-auto/android-auto-general/mirror-screen-android-auto-disucssion-t3734180
Here we are living in 2019 gamboa living in 3019!
:) - Working on Express Up Front Passenger Window and Key Fob Front Windows Up upon Lock.
Do you sell the harness for the center console upgrade
.I have a 2014 Silverado
He does, check out his website
hey man I was wondering the part number for your blue Denali Cluster you swapped for in place of the red one?
There are many appropriate cluster part#s. Typically, you want to match the year of your truck. See post here. www.gm-trucks.com/forums/topic/190465-denali-cluster-in-slt/page/29/
I been watching your vids for a long time now since I recently got my 18 Silverado and I saw all the mods you've done to yours and I'm excited to get some done !! Would you do a video on how to do a LTZ HEADLIGHT CONVERSION TO A STANDARD LT PLEASE
I already did the LTZ taillights and work amazing just need the headlights
Jesus Hernandez - Thanks! LTZ Headlights will Plug Right up to your LT. You’ll get hyperflash that I can correct with adapter harnesses. Email me at sales@harnessdr.com for more info on that. Thanks!
@@philgamboa2906 thanks so much for the info I'll definitely contact you once I get the pair of headlights
Why do door chain not working in your utter video
hi Phil hope you see this I have a 2014 I recently bought. I have a 2.0 HMI module if I purchase the 2013+ GM HMI Full feature from WAMS do I need to have a 2.5 HMI to sent that in?
Let me know thanks anyone!
You will want to get the correct 2.5 HMI. WAMS can supply you with all you need (it'll be brand new parts, correct parts, and programmed right). www.whiteautoandmedia.com/product/car-play-upgrade-retrofit-kit/
i have a 2014 silverado LT how do i got from a 4 inch screen to 8 inch?
Part number: 23168171
And the eBay listing below:
rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=174412983818&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111
They sell a box on eBay for 85 to bypass and unlock everything I have it on my 2016 2 ss camaro
Dennis Jones - There is a Bypass Module that can be done, but that only bypasses any restrictions while in drive. Doesn’t provide any of the other features that come with this HMI Unlock. I actually had that eBay module prior to this.
Dennis Jones, what is the link I currently have a 2014 LT with stock factory HMi what features will I get I’m trying to get car play for Apple and mirror play
@@arizonaadventures6203 - www.whiteautoandmedia.com - You'll want the appropriate 2.5 HMI and Radio Module for this upgrade.
Great video
Thanks!
What about a 1.1HMI CAN IT BE PEIGRAMMED ??!!!!!
Damn! A K&N cabin air filter! Now I've seen everything lol
Raul Perez - Yep. Lol. I like the ability to wash and refresh whenever chance I get.
Did you do the blu ray setup yourself or did you order the kit from mvi?
How’d you connect the iPhone cable coming out by the air vent? Do I need to get another connection for the HMI to do it?
Here is what I did - I used a USB Cable out of the Black Port of the HMI and went to the Brown Port of the Console. I then used another Cable out of the Green Port of the HMI and went to the "input" of the Front USB Hub. Then using another cable, i used the "output" of the front Hub to a USB Female and that's how my Lightning Cable if fed.
Sorry if this is a dumb or obvious question. Does unlocking your HMI void warranty? Same for the custom programming of the BCM. Thanks
Fonzy Bonzy - ANY modification done to your truck outside of a dealer installed GM product can void warranty IF GM can prove the modification caused the failure you are trying to get replaced/repaired under your warranty. Another example of this is - Say you purchased a GM product and installed it yourself, if that product failed due to faulty installation, GM would likely not cover that time.
Hope this helps answer your question.
issue lies in if you have a problem with this module or other module and they go to see what calibration of software is installed and if its not GMs software they can see that and see it has not been programmed by a dealer or authorized user of GM's software/programming and that would void your warranty. same goes if you tune/mod your ecm/tcm or whatever. when you program a module for gm it requires info and sends info to GM regarding vin/ date/ software calibration/ repair order and gives a code that the tech/dealer has to put on the repair order for warranty for gm.
Very nice!
Thanks!
Can you do a video of installing a (ikeyfree) please on you Silverado
Alvaro Elias don’t know what that product is. Let me look it up.
I would love to add those aux switches to my truck how difficult would it be?
Do you know if it’s possible to upgrade from a 7” to a 8” ? I have apple and android play on my 7” do I need to program as well?
4.2 I what the 8 inch screen 📺
Speak spanish??
No sorry.
Wow. Its awesome but too complicated
At least with german cars you could do all the coding yourself with an oem $17 cable off of Amazon for like the past 10+ years... 🙄
First
Yes!
I buy HMI from 2018 and I put one on my 2016 LT and my screen show look don’t work
Can this be added with the 12.1" screen