How to install a USB port to your MT07 FZ07
HTML-код
- Опубликовано: 15 сен 2024
- Hi guys, i'm going to show you how to install a usb connector to your MT07 without a direct connection to the battery. Hope you don't find my voice to boring!
Things you need:
4mm allen key
Usb connector
www.ebay.co.uk/...
Yamaha AUX connector
www.ebay.co.uk/...
Thank you, nice video.
Buying my MT-07 my dealer did that for me at no cost (had negotiated it). Wanted a 12v plug just in case to be more flexible at the bars. He did a great job there.
If you plan to buy your MT-07 / FZ-07 you may ask your dealer to do that, because why not :)
Nice bud negotiated that badaass 12v plug on a 10 000 bike :D
I think a 12V socket is a better choice than a fixed USB charging port. You can do more things with it, including fitting a removable USB charger that is easy to replace/upgrade.
Very helpful video. I used it today to install a USB on my 2015 FZ 07. Couple of tips that may help the next intrepid installer. In frame 2:53 where you are removing the plastic side shroud from the tank, I used a plastic wedge to release the visible tab, but there is also a not visible tab on the bottom side that can be released by pressing downwards on the center plastic just ahead of the visible tab.
Also, the front friction fitting you mention consists of a post pressed into a rubber grommet which installs into a cutout in the steel frame. When I pulled that front end out, the grommet came with it, so it is just a matter of removing the grommet from the post and reinserting it into the frame prior to attempting to reinstall the plastic shroud.
And when installing the pins on the wire ends, I initially failed to crimp the tabs enough onto the wires, so after connecting the connector halves and testing the system, the wires pulled away as I was ty-wrapping the connector in place, so had to start over again. Make sure to install the rubber seals on the wires first, and orient the pins correctly into the connector. I pressed the seals into the tubes with a small flat bladed screw driver to ensure the pins extended far enough to mate with the female sockets in the OEM connector. That also seats the pins into the mating connector half.
Oh, and to locate the OEM connector, I disconnected the large aft dark gray connector and the auxiliary power connector was directly inboard of that, so it was easier to see and work on the wiring as well as route the usb cable from the handle bars following existing wire bundles.
Other than that, it was a piece of cake!
i realize I'm kinda off topic but do anyone know of a good place to watch new tv shows online?
@Riley Dakota flixportal :D
@Bradley Cyrus thank you, signed up and it seems to work :) I really appreciate it !!
@Riley Dakota glad I could help :D
Loving the BMC multitool, never go without mine
Sorry but the link don't work. I have the original connector usb. What pin i need?
Bro, you don't need to remove all those plastic parts to install the USB changer, connected to the AUX con.
It can be easily feeded trough to.
Love your editing man legit awesome!
Dude when u were pluggin n the adapter to the power I thought u got electrocuted when u sped up the video out of nowhere lol 😂
Great vid - you by any chance have the names of those connectors, links no longer available. Thanks
Thanks for the video! One (probably stupid) question. I assume you just remove the battery connectors on the usb connector to get the wires free to insert into the male aux connector? Any advices on that specifically? Thanks again!
I have a question to the r7 and since they are close to identical bikes under the fairings, maybe someone has a clue...
The R7 has two identical plugs. one on the left and one on the right.
The left is for the quick shifter i believe. the problem is: the right one doesnt work for recharging my phone. on the left its working. do i need to eneable the right plug somehow?
HELP!!! I'VE TAKEN ALL THE COVERS OFF. AND UNDERNEATH THE ADAPTORS ARE DIFFERENT THIS ORIGINAL YAMAHA USB BLOCK CONNEDTOR IS LIKE A OVAL AND THE ONE ON MY BIKE IS TRIANGLE WHAT DO I do?
Can you indicate if the USB will receive power when the key is in the P< position? I'd like to use this connector to install LEDs, but I don't want to have to leave the key in the bike to keep them on
Just curious what was the plug hooked up to prior to install?
PynkPwny nothing it's an Auxiliary plug
tim dimondi that is correct yes
Actually that "dummy plug" that was holding the connector in place is the exact same plug he purchased... it's held in place by a little electrical tape. He didn't need to but the connector... just the male pins that go into the connector.
Joe Gray just realized about it after buying and installing everything
Dennis Herrera yeah... it's a pretty common mistake.
Is it okay to replace that 2A fuse with something bit more buff? I feel like 2A would fry easily with a newer phone.
Thank you, it was really helpfull.
This was very useful thanks buddy. I followed this to do my install. Btw - do you know what the other end of the plug was that you unclipped on the bike? Was it just to complete the circuit? I ended up taping it up to keep water out.
Thank you for making this... so where did you end up connecting the usb plug?
Please friend you connected to the fuel pump plug? I need to know where the fuel pump connector on this bike is, you know? thank you
Was the white conector conekted to something before that dont work now? Sorry for bad english
Hi mate, I bought all the items you mentioned here, the USB socket that I got came with a fuse and it looks like you cut one off. Is that because the accessory plug is fused? Would be great to be able to shorten the cable like you have.
Yes, the aux line is already fitted with a 2A fuse.
My engine sign lights up after i installed this usb charger.. Do you know how this come?
Question, if I'll plug in my smartphone to charge won't it burn up since smartphones only charge around 5 volts and not 12?
Ivan Gutsan no buddy, if you buy the right connector it drops the 12v down to 5v, just make sure the connector you buy has a 5v output!
MT 07 UK Owners Club got ya! Thank you
@@JanisStrelkovs Where to download the program on the PHONE?
what are those little connectors called you used to then put into the yamaha connector?
check the description
Dude, what's that song called that's playing on your phone? Tried to find it everywhere but no idea what it's called.
Fade - Alan Walker
Legend, thankyou!!
Hi there, I bought everything like recommended. Somehow I couldn't manage to install the cables in the Yamaha connecter probably. Can you give me any advice, how to crimp the male terminal, that the cable is tight and fits in the housing that it clips and doesn't fall out
sorry for the late reply. if you've managed to do it already then great! if not the connectors only go into the housing one way. flip them around until they slot in and click
Hi, thanks anyway for responding. Actually I found out that the connectors only fit into the housing one way. However I'm still struggling to get the connecters probably crimped. Which part of the connector has to be crimped and what kind of tools have you used to do so?
I find that long nose pliers work best. there should be 2 bits on the connector that stick up, bend one in over the exposed wire then bend the other over that
Thanks alot mate. Just tried again, successfully this time.
Nice video mate cheers
Bro I want that motorbike but scare to get one because of the bike thieves what do you do to keep the bike safe when you're outside and your bike needs to be parked outside?
Big ass chain, some form of alarmsystem. Possible gps tracker?
TheMetalHead But they can steal cut through the chain though. Plus big chains are really hard to find.
Well, the more you do the safer you are. I never leave my bike out of sight too long along with don't park it anywhere. Park it at night in your garage or house...please.
I use both a chain and disc lock alarm.
What is the year of your MT-07?
Where’d you end up putting it?
Whats the name of your connector you use?
If you want to crimp your own connector, you need a Sumitomo MT 2-pin male connector (6187-2311)
Thank you! :-)
powerbank?
what camera do you use?
Niel Robert I used the gopro hero 5 black with the head strap
Thanks for replying!
Didn't see the ebay link for the plug, can you post this ? Great video, thanks
Plugs are available at ebay. Just paste in search bar "Yamaha DC Power Outlet Connector Plug MT07 MT09 FZ07 Heated Grips USB Charger"
The usb is waterproof?
Most are not. Take waterproofing into account, or route the cable to the back of the bike.
Are you serios? All this work just for USB???