I'm 73 years old and have been an Instructor or Teacher most of my life. This is one of the best instructional videos on just about anything I have viewed. I wish all videos were as good. Thanks
Did you spin the rear wheel first? These have a Soft Start that requires the scooter start rolling forward manually, then the motor kicks in. The first models threw kids off, ran into walls, etc. So they changed it to only activate once it's rolling. Many don't know about that.
WOW!!! When I watch a video and feel that it was a good informative video I will almost always give it a thumbs up, but to be honest have never taken the time to leave any kind of comment, but this video is BY FAR the most informative well put together video on fixing something that I have EVER come across here on RUclips! You did an absolutely amazing job explaining in detail on how to check, fix, repair or if need be how to replace anything and everything on this Razor E200. Really really good job! I just subscribed to your channel and look forward to checking out what other videos you have posted. Clearly you know how to fix probably anything and if you don’t know how to do it you clearly stated on here you do the research and figure it out before passing the info on to us. I love that!
Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!
Thanks this was a BIG HELP! ...with the electrical tape tip... I used a 6.3m spade connector and it seems a little small to crimp...so i did the best i could and used a little electrical tape just to be safe!! I hope this works! Thanks again!!
When you pull the handbrake the circuit opens (which stops the motor). So, No; the plug either has to be connected, or you could jumper the leads to bypass the brake circuit.
*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
I found 3 of these 100 150 200 Im going to fix em then give em to the kids. I actually was going to buy some from Walmart . I dodge that expense thanks a lot scooter guy.
I just found a Razor E200 scooter at our Landfill Transfer Station's swap shack for free. It doesn't seem to have any power. I searched online and came across your videos. Very informative step by step troubleshooting with easy to understand terminology. Looking forward to my first attempt at diagnosis the scooter treasure. It didn't have a charger so I may start by attempting to charge the batteries like you described. Thank you.
Useful lesson hands down. Im most definitely saving this video for future references. For any battery testing/electrical..,! Thx! 《Great for a resource to help son(s) , some friends & possibly my forgetfulness associated with short attention span at times. 》 poa... only because i like to get str8 to it.. vid was even better at 1.75× speed! "respectfully" and only for an fyi for any1 w/adhd.
I'm probably late to the party, my model requires some speed before it powers by motor. Guess it saves getting thrown off the back from dead stop. Not sure this model's features
How low a voltage will the scooter run on? I have an electric dirt bike which the batteries tested slightly low (about 11.4V), and it would not run at all (even after charging all night) until I replaced the battery. Now I have this 24V Razor scooter that won’t run, and equally the batteries test around 11.4V (even after charging). All switches, motor, and breaker test good. And the voltage drops about 0.5V when you press the trigger, but no voltage is going to the motor. And I have replaced the power unit with a brand new one. I know the only thing left is the batteries, but I would like to know for sure if there is a minimum voltage the unit will run on? (I hate to just “shotgun” troubleshoot things) 🤨
Hey im just a kid and i dont know what of good battery i should get for my e100 cause well im trying to repair and im makeing progress but can you work on a e100 if you find one and if you do get a new battery can you put it in the links below thankyou
Do you think changing the battery to different one to last long and more miles on a full charge is possible? Like lithium battery? If yes can you do a video to show what is needed? Or just directions please
Good video, BUT LOL the piece you soldered to the wire is a f2 to f2 terminal connector. I guess you can solder to it like that, but it is made to change the f2 terminal that was on the battery to an f1 if your wiring was f1 instead of f2. F1 is smaller than f2. Smaller batteries usually have the f1, bigger 12ah or higher have the f2, wider ones.
why did someone wire a red and yellow wire together on the speed controller and cut off the wires from the twist throttle to the speed controller on my daughters e300 razor scooter. I tried to wire it up yellow to yellow and red to red but it won't go. The only way it goes if I wire the red and yellow on the speed controller together. Can up help me out.
I bought a used scooter and it take 2 12v batteries. It seems to drain the battery very quickly. I bought the 2 batteries on fb she says they are new. I just go down hill at my job parking lot just to clear my mind. I let gravity do all the work yet I can see the battery dies fast less then 5mins give or take again going down hill. What could a common problem be? The batteries?
The scooter can run a longer time with two 12 volt 9 ah or higer batteries. So you can go for like 35 ah or 100 ah? Or ir is too much power for the scooter?
just installed new batteries on an e300s and let them charge for 16 hours before use since they were completely dead when they arrived..what happens now is the scooter runs but 10 seconds later it cuts off...hitting reset button works but it still cuts of after riding for 10 seconds...thought it was weight issue but im 185lbs and its rated for 220lbs..power button works and lights up charger seems fine..reset button works so im stumped..watched another video where the guy said it could be the batteries not pushing enough volts since his scooter was doing the same thing as mine...bought batteries from amazon..12volt 9 amp Weize battery...could the new batteries just be faulty..please advise..excellent video too
i have been using razor scooters for a long time now almost 3 years and i find the best one for older people is the e300 its also faster and holds more weight but i like to make mine custom with some spray paint and new throttle and key start and an led battery life light so i know when my battery is dieing.
Yes, the front tire has a built-in amp-govenor to protect the batteries from those kinds of scenarios, if the front tire deflates its letting you know that it's fully charged...I hope this helps, I once owned and ran my own electrical scootor/bike repair shop, before liability lawsuits, and complaints from disgruntled customers had me shut down...I now focuse my vastly superior electrical knowledge, and know how on rewiring log cabins at discount prices, with no warranty's and customers must agree to not sue me for any unforseen, and unfortunate natural electrical fires which I have no control over...Im also a life coach...
Will the batteries charge if the controller isn't working? Will it run if it's plugged to the wall? Mine doesn't charge and idk if that's the reason it won't run so I plugged it and twisted the handle slowly till I had twisted it all the way and it didn't move. Help!!! I don't want to their it away or spend allot to fix it otherwise not worth it but yeah mine only turns while it's plugged
Wow good presentation step by step. but but Why do u have to take the white little box off the old harness or wires. you're just transfering the Wires. you're making it look complicated by taking off the white small box thingy.
Love the part where he "gets the batteries out" and presto they are out....but in reality it is worse than towing a battleship with a raft to get out...
@@JRobling was just watching a vid on ' ghost reading ' where it will show 24 volts but no load , cold cranking power. I'm thinking this is the issue. They read good but actually are not.
One question. Why does my battery have a Fuse ? a black little box with a fuse inside. Razor Pocket Mod 7Ah battery with a wire that connects to a black box with fuse in it. well two wires that has a fuse box connect to the wires. and the other two wires go to the Battery connector or what u call it. So 4 wires total from those Two 12volts battery. Why do some scooters have the fuse?
Do you have to charge for 12 hours in a row? I bought one used yesterday and charged if for 9 hours, but I was weary of leaving it on charge overnight. Do I need to charge for another 12 hours or just another 3 or so?
Hey bud! Yes initially the first charge you want to charge for at least 12 to 24 hours but it will not hurt the scooter if you leave it plugged in, the charger has a built in overcharge protection on it so you are good to go on that, hope that helps
My scooter turns on but when I pull the throttle it doesn’t make a clicking sound but when I plug in the charger then I pull the throttle it clicks so is it the battery or the controller
I got new batteries, I tested the motor and it goes when I connect it to batteries, I got a new throttle and new controller. Still nothing. It makes like a clicking sound(I think in the controller new and old) when I press the throttle.
There are a few differences between the e100-e300. e100 require speed before the motor kicks in and the other dont so the circuit board is different, the brakes for the e100 are for the front and the e200 and 300 are for the rear so the set up is different there, e100-e300 have different wheel types, but the battery is the same for all types
the problem with these is if u have to replace the expensive batteries you may as well toss it in trash because ...these have little to no value...they sell for 20-30$ used in good working cond in my area and 2 batts cost about 40$...so dumping 40$ into an item thats worth at most 30$ doesnt make sense.
I had a question for anyone who can be of a help 🙏🏼 much appreciated thanks. So I have a scooter electric wires are cut red and black are there other ways I can use to charge it and not damaging the battery lithium wattage is 7,500 it can store up ? Could I use a portable car charger with the red and black cables it also has filling up you're tired mode anyone can help
My mother bought scooter at a pawn broker and it charges the light turns on and it runs for about 4 feet then like the power goes dull and begins to loose power ...can anyone help it does anyone ever run into this problem
I'm 73 years old and have been an Instructor or Teacher most of my life. This is one of the best instructional videos on just about anything I have viewed. I wish all videos were as good. Thanks
i guess I'm kind of randomly asking but do anyone know a good website to watch new movies online ?
Coincidentally, I just said the same thing to him. I told him he should be a teacher. He is teacher material.
Are you a teacher? If not, you should be. Your teacher material. Excellent.
Did you spin the rear wheel first? These have a Soft Start that requires the scooter start rolling forward manually, then the motor kicks in. The first models threw kids off, ran into walls, etc. So they changed it to only activate once it's rolling. Many don't know about that.
Newer models do, this one didn't
Good to know! 👍🏼
WOW!!! When I watch a video and feel that it was a good informative video I will almost always give it a thumbs up, but to be honest have never taken the time to leave any kind of comment, but this video is BY FAR the most informative well put together video on fixing something that I have EVER come across here on RUclips! You did an absolutely amazing job explaining in detail on how to check, fix, repair or if need be how to replace anything and everything on this Razor E200. Really really good job! I just subscribed to your channel and look forward to checking out what other videos you have posted. Clearly you know how to fix probably anything and if you don’t know how to do it you clearly stated on here you do the research and figure it out before passing the info on to us. I love that!
Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!
Thanks this was a BIG HELP! ...with the electrical tape tip...
I used a 6.3m spade connector and it seems a little small to crimp...so i did the best i could and used a little electrical tape just to be safe!!
I hope this works!
Thanks again!!
Helped to fix mine, thank you so much! I also found mine by the garbage. Mine needed air in the tires and 2 new batteries.
can the brake circuit be disconnected and still have the motor spin?
When you pull the handbrake the circuit opens (which stops the motor). So, No; the plug either has to be connected, or you could jumper the leads to bypass the brake circuit.
*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
I read online that the scooter must be going 3 mph to allow it to actually start using the motor. This is a built in safety feature.
This is not a feature in this model
I found 3 of these 100 150 200 Im going to fix em then give em to the kids. I actually was going to buy some from Walmart . I dodge that expense thanks a lot scooter guy.
I just found a Razor E200 scooter at our Landfill Transfer Station's swap shack for free. It doesn't seem to have any power. I searched online and came across your videos. Very informative step by step troubleshooting with easy to understand terminology. Looking forward to my first attempt at diagnosis the scooter treasure. It didn't have a charger so I may start by attempting to charge the batteries like you described. Thank you.
Thank you for your explanation, great job now I will work on my daughters scooter
Useful lesson hands down. Im most definitely saving this video for future references. For any battery testing/electrical..,! Thx! 《Great for a resource to help son(s) , some friends & possibly my forgetfulness associated with short attention span at times. 》
poa...
only because i like to get str8 to it.. vid was even better at 1.75× speed! "respectfully" and only for an fyi for any1 w/adhd.
Is it ok to just take the batteries out and replace
Love this video - struggling a bit because it looks like this is the second battery and the last time the person took too much off the wires.
You can jump that brake sensor to close the circuit and disable it for testing purposes.
That's what I did on mine (also found next to a trash can).
How do you jump a break
@@jerahflore2866 just unplug it
fabulous video...i did all tests...mine had a bad breaker switch...cheap fix..
I'm probably late to the party, my model requires some speed before it powers by motor. Guess it saves getting thrown off the back from dead stop. Not sure this model's features
That is very good to know! 👍🏼
I found one by the dumpster and am trying to get it working. So I will try that. Thanks!
I have an E150, do you know if this video is accurate to that model as well? I'm having trouble finding troubleshooting information for it.
Thanyou you help me a lot nice información 👍
Does it Regen brake when you let go of the throttle while decelerating?
How low a voltage will the scooter run on? I have an electric dirt bike which the batteries tested slightly low (about 11.4V), and it would not run at all (even after charging all night) until I replaced the battery. Now I have this 24V Razor scooter that won’t run, and equally the batteries test around 11.4V (even after charging). All switches, motor, and breaker test good. And the voltage drops about 0.5V when you press the trigger, but no voltage is going to the motor. And I have replaced the power unit with a brand new one.
I know the only thing left is the batteries, but I would like to know for sure if there is a minimum voltage the unit will run on? (I hate to just “shotgun” troubleshoot things) 🤨
Wow ❤ thanks brother 😊
Thanks so much 😁I’m figuring this all out it’s gita be my batteries . I also found mine outside somewhere . 👍🏽
Will it run with the brake unplugged ?
Hey im just a kid and i dont know what of good battery i should get for my e100 cause well im trying to repair and im makeing progress but can you work on a e100 if you find one and if you do get a new battery can you put it in the links below thankyou
amzn.to/2NR16Mx That is the batteries for the e100
Do you think changing the battery to different one to last long and more miles on a full charge is possible? Like lithium battery? If yes can you do a video to show what is needed?
Or just directions please
hi, picked up a e300,, had a battery with low voltage, i replaced both and it runs but seems slow, like 5mph, im 220lbs,,, should it run faster?
It should be more like 10 mph
9:00 min is when he FINALLY touched wire to battery
Good video, BUT LOL the piece you soldered to the wire is a f2 to f2 terminal connector. I guess you can solder to it like that, but it is made to change the f2 terminal that was on the battery to an f1 if your wiring was f1 instead of f2. F1 is smaller than f2. Smaller batteries usually have the f1, bigger 12ah or higher have the f2, wider ones.
F2 to f1 connector. phone auto corrected
How much amazon got the links can one be good thank bro video
Nice explanation... Thnx 4 posting
why did someone wire a red and yellow wire together on the speed controller and cut off the wires from the twist throttle to the speed controller on my daughters e300 razor scooter. I tried to wire it up yellow to yellow and red to red but it won't go. The only way it goes if I wire the red and yellow on the speed controller together. Can up help me out.
Can u put a lithium iron battery in scooter that originally had sla lead batterys in
Yes
I bought a used scooter and it take 2 12v batteries. It seems to drain the battery very quickly. I bought the 2 batteries on fb she says they are new. I just go down hill at my job parking lot just to clear my mind. I let gravity do all the work yet I can see the battery dies fast less then 5mins give or take again going down hill. What could a common problem be? The batteries?
Bought mine new for the boys, one works fine, the other never worked. Turns on, nothing. 2 years now.
Good Video thanks for posting this
Balls to the walls man. Lol.
Perfect, thank you so much...
The scooter can run a longer time with two 12 volt 9 ah or higer batteries. So you can go for like 35 ah or 100 ah? Or ir is too much power for the scooter?
Size and weight when dealing with sealed lead acid batteries.
What if your charging Port on the scooter is a three prong plug instead of the charging port that goes with the scooter will it still work
just installed new batteries on an e300s and let them charge for 16 hours before use since they were completely dead when they arrived..what happens now is the scooter runs but 10 seconds later it cuts off...hitting reset button works but it still cuts of after riding for 10 seconds...thought it was weight issue but im 185lbs and its rated for 220lbs..power button works and lights up charger seems fine..reset button works so im stumped..watched another video where the guy said it could be the batteries not pushing enough volts since his scooter was doing the same thing as mine...bought batteries from amazon..12volt 9 amp Weize battery...could the new batteries just be faulty..please advise..excellent video too
i have been using razor scooters for a long time now almost 3 years and i find the best one for older people is the e300 its also faster and holds more weight but i like to make mine custom with some spray paint and new throttle and key start and an led battery life light so i know when my battery is dieing.
Can i use an old 24v 2,5amp adapter to charge the e100 with?
the charger is suppose to be 24v 1.5 amp so it might be a little too much
Yes, the front tire has a built-in amp-govenor to protect the batteries from those kinds of scenarios, if the front tire deflates its letting you know that it's fully charged...I hope this helps, I once owned and ran my own electrical scootor/bike repair shop, before liability lawsuits, and complaints from disgruntled customers had me shut down...I now focuse my vastly superior electrical knowledge, and know how on rewiring log cabins at discount prices, with no warranty's and customers must agree to not sue me for any unforseen, and unfortunate natural electrical fires which I have no control over...Im also a life coach...
Will the batteries charge if the controller isn't working? Will it run if it's plugged to the wall? Mine doesn't charge and idk if that's the reason it won't run so I plugged it and twisted the handle slowly till I had twisted it all the way and it didn't move. Help!!! I don't want to their it away or spend allot to fix it otherwise not worth it but yeah mine only turns while it's plugged
does the kickstand have a cutout switch?
Wow good presentation step by step. but but Why do u have to take the white little box off the old harness or wires. you're just transfering the Wires. you're making it look complicated by taking off the white small box thingy.
Love the part where he "gets the batteries out" and presto they are out....but in reality it is worse than towing a battleship with a raft to get out...
working on a e300. batteries seem to test good 24 v but the wheel can be stopped by hand. no power to pull but it spins. any thoughts?
That sounds like how my batteries were when I found the scooter, just weak old batteries. Possibly the motor is shot if the batteries are good
@@JRobling was just watching a vid on ' ghost reading ' where it will show 24 volts but no load , cold cranking power. I'm thinking this is the issue. They read good but actually are not.
@@BigAlWillis What video was it? Sounds like my problem too..
@@Andrew-je2pg too long ago to find the video. I was just watching a lot of scooter videos. If your wheel spins then its probably weak batteries.
Spot on, great informative vid
Same aswell
One question. Why does my battery have a Fuse ? a black little box with a fuse inside. Razor Pocket Mod 7Ah battery with a wire that connects to a black box with fuse in it. well two wires that has a fuse box connect to the wires. and the other two wires go to the Battery connector or what u call it. So 4 wires total from those Two 12volts battery. Why do some scooters have the fuse?
How do you figure them batteries are bad because the last time I check 11.45 volts is pretty dam close to being a fully charged 12v good battery
Voltage does not guarantee life, If a battery is weak it can still show 12v but can't hold load.
How can you charge a 24v battery with a 12v charger, and brown wire is positive and blue is negitive....
Do you have to charge for 12 hours in a row? I bought one used yesterday and charged if for 9 hours, but I was weary of leaving it on charge overnight. Do I need to charge for another 12 hours or just another 3 or so?
Hey bud! Yes initially the first charge you want to charge for at least 12 to 24 hours but it will not hurt the scooter if you leave it plugged in, the charger has a built in overcharge protection on it so you are good to go on that, hope that helps
Thanks 🙏 bro good scooter is fix
How many miles can you go with this battery?
does need a 24v charger or more?
Hey. Ino this video is really old, but im stuck on troubleshooting. Do you still help ypur subscribers with wiring? Thanks
My scooter turns on but when I pull the throttle it doesn’t make a clicking sound but when I plug in the charger then I pull the throttle it clicks so is it the battery or the controller
I got new batteries, I tested the motor and it goes when I connect it to batteries, I got a new throttle and new controller. Still nothing. It makes like a clicking sound(I think in the controller new and old) when I press the throttle.
I HAVE A RAZOR E150 SCOOTER. WILL IT INTERCHANGE WITH THE 100, 200, 300?
There are a few differences between the e100-e300. e100 require speed before the motor kicks in and the other dont so the circuit board is different, the brakes for the e100 are for the front and the e200 and 300 are for the rear so the set up is different there, e100-e300 have different wheel types, but the battery is the same for all types
THANK YOU FOR THE REPLY. THAT HELPS.
@@JRobling are you positive the e100s need to be kicked started first..just run with it THEN hit the throttle?
They won't move till you get it moving first does it make a click when you turn the throttle try turning the wheel as fast as you can then throttle.
That is the 100W motors that do that. The E200 is a 200W motor that has enough torque to start without a push.
My motor the diver thing which makes the back wheel turn just keep spinning as soon as I turn my scooter on without me touching the throttlr
Is the fuse box really that important or can I just bypass it and use the scooter without a fuse. can anybody help? Thanks
How do u fix a Razor MX500 battery that won’t hold a charge
Anyone having issues with a Core 90 not moving? I have a red light on the switch but when we kick off nothing happens.
You don't need to mark the connectors every connecotr is Unique Can't get it wrong
the problem with these is if u have to replace the expensive batteries you may as well toss it in trash because ...these have little to no value...they sell for 20-30$ used in good working cond in my area and 2 batts cost about 40$...so dumping 40$ into an item thats worth at most 30$ doesnt make sense.
Works now?
We bought the G- kids one a piece you have to get it going before the motor will engage , the Moyer won’t start until it’s in motion
I had a question for anyone who can be of a help 🙏🏼 much appreciated thanks. So I have a scooter electric wires are cut red and black are there other ways I can use to charge it and not damaging the battery lithium wattage is 7,500 it can store up ? Could I use a portable car charger with the red and black cables it also has filling up you're tired mode anyone can help
I have e300 razor scooter I have changed the batteries but it's still not holding the charge
I have a 300 and it’s doing the same thing I charged the batteries up still doesn’t move
What i can Do if the box that is all That is not there
connectors are all unique to each other, their different
If power button is not coming on, could that be battery. Also my power button is loose.
It should light up . Bulb is dead, battery is dead or wires not making connection.
It may be running slow because you're only using 12 volts from One battery
Why would one of my new batteries get hot when I charge them
Could it be the fuse
You need to give it a little push
Great video, easily could have made it under 10 mins though.
My mother bought scooter at a pawn broker and it charges the light turns on and it runs for about 4 feet then like the power goes dull and begins to loose power ...can anyone help it does anyone ever run into this problem
The voltage shows that the batteries are at a 10% State of Charge....they're dead, especially after charging them for days!!!🛴👎
Y does it need 2 batteries?
Go saying problem my do the click to the light on to don't stared
I found mine by a dumpster too 😂
Brakes
De-pressed vs Pressed
Isn't pressed Is Pressed?
Is Not stopped Stopped
Tha problem you battery you fit it don't now what battery need for my it old Racer 2013
how tighten throttle
Necesito el cable de la batería
Does any one know how to change the batteries on a 360 Xtreme adult scooter?
Plz get back at me!
My name is Mark.
Has el video en español por favor
I like the part when he says it don't go nowhere
☆☆☆☆ ★ Thank You!
thz
That's all you have to do
Perez Sharon Taylor Ronald Garcia Shirley
Just bypass everything and just keep the switch
I’m getting tempted to do just that!
I found a scooter but missing a controller