There is a 30 fps gecko code for mario kart wii, it helps the game runs on low end devices at a steady frame rate (it wont run slower, since the game itself has a 30 fps mode for 3-4 multiplayer races)
Nice! Good to know. Honestly I haven't really investigated codes. It feels like a lifetime effort and often the games I test I don't have any personal interest in playing. Hopefully others see your comment and it helps them!
Yes thank you!! Could you possibly do a GameCube setup video as well? Also saw in the other comment too I would also love to see a Wii controller setup video as well. Thank you sir for your hard work
GC video is coming up in 30 minutes! The Switch controller video, do you hate me?? haha I hate configuring Dolphin controllers. It always seems to forget my settings. :(
@@MjolnirStone well you already doing a huge favor for a lot of people here so thank you sir for your time. I’ve been tackling mine for minute and I think I got my setting right for Wii 😁
Can you make a guide for wii controller setting especially for metroid prime trilogy and spiderman shattered dimension? And if you can test metal gear solid 3 snake eater?
It's awesome that it can use the gyroscope for shake and tilt. I've been wanting to play some wii games like excitetruck and was wondering if it would have that functionality.
Thanks for the awesome video, I'm gonna try this settings ASAP to play Mario for the Wii. Mine runs super slow and sluggish but i have not adjusted anything yet. BTW how did you get the shake and gyros to work? Could you please show the controller mapping for that please?
Once I get time I may do a super quick video showing how some of those options work. For now I recommend changing your settings, especially i it LOOKS like you have them right, then save an change them back. Dolphin and controller settings don't play nice.
@@MjolnirStone reflecting on this wii video now, and noticed I never really thanked you for it It's a great video! Thanks for actually doing it even after the harassment
For tatsunoko vs capcom I found turning off " arbitrary mip map detection" under enhancements and setting shader comp to asynchronous/ skip drawing fixed a good bit of the mid fight lag on attacks and assist calls. Haven't gotten a concrete number on over/underclocking for gameplay improvement yet.
@@gusonian8637 I haven't tinkered around as much on my rp3+ as what I want to play has been mostly set in and going beyond on games that are iffy, to unplayable I haven't much been concerned on. But, the RP3+ has gotten an update for a bit more overhead by setting a system overclock in it's android menu (where you'd find bluetooth or brightness settings) to changing the system to performance or extreme mode to run better. It's not perfect still, so don't expect miracles but, aside from back and forward tinkering, setting the RP3+ to extreme and seeing what you can now get out of it is an option for anything you'd like to get running better than at base.
@@gusonian8637 The performance options update has been out for almost 5 months now. It gives new life to the rp3+ and going back to some of those problem games with the system set to performance mode or extreme mode. Not everything in the library works but the ones that were just a bit stuttery may yield different results.
Thanks for this! I know you skipped over the Wii and GameCube controller settings but is there any chance you can do a video to show these or point me to the recommended settings please?
@@MjolnirStone Thanks very much, trying to get my head around the settings is giving me a headache 😂 keep up the good work, been following all your settings guides and working through them for getting the most out my RP3+! 👍🏻
@@SirMuddyToast The biggest advice can give you is that Dolphin is a liar. Don't trust it. Even if it says the setting is correct, change it to the wrong one, save it, and change it back.
So you know that time when you turned in homework and immediately realized you forgot to include one answer? That's this. I absolutely intended to mention how to do that but forgot. Luckily, it isn't that hard. The key is to look for "Motion Controls" in MMJR and then set it to "use device sensors (without pointer emulation)" and you should be good to go. I will also add that in general Dolphin can sometimes be weird about remembering your control settings and also lie to you. So if your controls aren't working right and you check the settings and they look right, ignore it. Change them to the wrong settings then back to the right ones. It often shows one but isn't always accurate. Also, I will add this info to the video description. Thanks for the reminder!
Would you recommend using PAL versions of Wii and GameCube games when possible? Or is the screen-tearing due to the screen being 60hz too much of an issue?
It really depends. Most of us are using PAL for testing these higher-end systems because they are most likely to play at full speed due to targeting 50fps rather than 60. For Wii it is especially nice since many of them also have a Pal60 mode meaning you have a choice. Of course generally I would prefer NTSC and if a game runs well at 50 I will usually test NTSC and keep that if it also runs. As for screen tearing I wouldn't worry too much as most of these emulators have functionality to reduce that (vsync, duplicating frames, etc.).
Great tips. Not sure if you'll see this, but maybe. Anyway, have you heard of issues where the left analog won't be detected on Dolphin for Handheld? L3 works, but when trying to set left/right/up/down, it doesn't register at all. It worked when I first set it up, but subsequent attempts have been fruitless. MMJR works just fine, but Dolphin for Handheld isn't behaving. Thanks in advance! Good video!
I will see it! Unfortunately I haven't heard of that issue, and I spend a lot of time in the Retroid Discord. What happens when you delete the app and add it again? It almost sounds like it is switching you to another control scheme without telling you, which Dolphin likes to do in my experience.
@@MjolnirStone Reinstalls don't seem to do the trick unfortunately. Worked when I installed and set it up out of the box but not anymore. Currently impossible to map the left analog movement to anything, only the L3 click works for some reason. This is only an issue for Dolphin for Handheld and not mmjr2 which is odd. Driving me up a wall, haha.
I have the same experience and using DFH. I only have Mario Kart and you can’t steer the car. So annoying. Will have to switch to another emulator I guess😢
So will non PAL roms just not work correctly? I have a few downloaded that are USA based (in the process of getting my library ready for when I order the RP3+ later this month) and want to make sure I am getting the correct ROM type
this is great to know and see. i love wii emulating. mario bros looks great, but inconsistent with other games. tempting, very tempting, but i think sooner than later theyll have an rp4 that can do it much better
What are your settings for New Super Mario Bros.? It wasn't mentioned in the video. The game feels real sluggish for me even at different clock speeds Thanks
Ive been playing web of shadows wii and cant seem to get the perfect settings. May I ask for that game to be included in your next review on rp3+? Thanks
This one will get a lot of GC and Wii games playable but admittedly not perfect. For the price I thin it is the best option and if you are on a budget I think nothing else comes close.
Thanks for your video. I will for sure buy the RP4...cause the 3+ is so close to be really awesome. What kind of SOC could they use as a successor of the T618?
Any help on MMJR just closing right after installation? I tried uninstall/reinstall/clear cache twice now of version 11505, from the GitHub page listed in the GC guide. I even tried v11485 of the app, no dice. I was trying MMJR since MMJR2 gives so many glitches and lag. (Huge thank you for these guides. I have followed them for the lower systems and running great. Got my RP3+ last week & love it!)
Some indie games work fine but most others don't. I don't currently have any plans to do a Switch video as there just wouldn't be much content to show and most of it (Sonic Mania, Hollow Knight, etc.) already runs on Android anyway.
It should work but probably breaks every time you launch the emulator. Try changing it (even if it says it is set correctly) and then change it back. Honestly, I just avoid any games that need that feature.
@@MjolnirStone I did and it worked, thanks! I found the motion settings under the overlay control settings and did as described. The only semi issue I still have with tilt is that it has the layout vertically instead of horizontally. So it always thinks I'm tilted towards the left lol
@@alejandrocardona4410 That's weird but not surprising. Probably had something to do with the orientation when you turn it on or whatever. Dolphin is so annoying with controller settings but glad it is "mostly" working for you now!
Hi I ve noticed Lego Batman on Wii is not working with horizontal controller is it possible you could find out cause the games looking good on retro 3+ TIA
I know we've all been focused on the more modern consoles but the gyros have me wondering... is there a way to emulate the GBC and GBA games that had gyro cartridges, stuff like Kirby Tilt N Tumble, Warioware Twisted or Yoshi Topsy Turvy?
yes, in Retroarch there is a setting to enable the motion controls on GBA games but there is no way to change the sensitivity and its really high by default. I'm sure with some getting used to it it may be playable tough.
If you are using MMJR2 (in my guide) you can pull up the menu in a game, choose "overlay controls" and then toggle controls. Just toggle all to turn them all on or off.
That is mostly Dolphin being trash. Do not trust what it shows you. Even if your settings look correct, Dolphin lies. Change it to the wrong settings, save, then back to the right settings. See if that helps. I will also do a video ONLY about this as soon as I get time.
so in general wii games are still not playable in a good way with the 3+ but they are on a good way and most of the games before nintendo wii are playable which still is pretty good for a handheld for 150$
Honestly, gonna just wait a generation or 2 until i can play any gamecube/ps2 rom i want to play without having to individually toggle settings for each specfiic rom i will need in order foe the game to be considered playable.
You get the PAL roms to have the option of running at 50Hz if they don't quite perform well enough at 60. Of course, if space and bandwidth are no concern then go crazy.
Alright. Where's a good place with a how to on the button mapping for the motion and shaking. Can't enjoy wario land shake it without being able to shake it. Lol. Help me out fella
If you are using the fork of MMJR in the video description, when you are in a game pull up the side menu, go to Overlay Controls, then Motion Controls, and set it to "use device sensors (without pointer emulation)" and see if that takes care of it for you.
Hi there I seem to be having trouble using GameCube controller with new super Mario for the wii I emulated it but not getting anything.mario kart works but not Mario any help appreciated. TIA
Thanx for the info went and got it..yasss First time in years doing this retro stuff last time was with my daughters ds ha. Your videos and comments have helped a lot thanx man!
When it's ready. AetherSX2 is very complicated with a ton of options that impact performance. It will take a bit longer to properly learn the ins and outs so I can be sure to present the most crucial information.
@@MjolnirStone Nah, I can't digest the fact that a new device came out before receiving a preorder on a previous one. RP3 was advertised as a cutting-edge, budget-friendly handheld, and before my order arrived, RP3+ was ready for preorder. This made my new device already outdated lol. I still placed a preorder on the new model and it still hasn't been dispatched. knowing their marketing strategy, they are going to announce a new handheld in Feb 2023.
My Pocket 3 plus shipped today. Thanks to people like you, I feel confident about it all. Can't thank you enough for your insight!
That's awesome! The RP3+ is a very capable little system so for the most part I think you'll have an easy time setting it up and enjoying it.
4 pro pre-orders started last week.
Excellent video, thank you for sharing your knowledge and experience!
Happy to help!
There is a 30 fps gecko code for mario kart wii, it helps the game runs on low end devices at a steady frame rate (it wont run slower, since the game itself has a 30 fps mode for 3-4 multiplayer races)
Nice! Good to know. Honestly I haven't really investigated codes. It feels like a lifetime effort and often the games I test I don't have any personal interest in playing. Hopefully others see your comment and it helps them!
My controls straight up dont work in this emulator
Yes thank you!!
Could you possibly do a GameCube setup video as well? Also saw in the other comment too I would also love to see a Wii controller setup video as well.
Thank you sir for your hard work
GC video is coming up in 30 minutes! The Switch controller video, do you hate me?? haha
I hate configuring Dolphin controllers. It always seems to forget my settings. :(
@@MjolnirStone well you already doing a huge favor for a lot of people here so thank you sir for your time. I’ve been tackling mine for minute and I think I got my setting right for Wii 😁
This is a great video. Sometimes, changing the shader compilation mode helps too.
Thanks, and you're right. That option can also make a difference.
@@MjolnirStone
How about for the Oiden Pro?
Thank you. Don't have a RP3+... I have an Android phone and Gamesir X2... but this was still quite applicable and helpful.
Glad it was still helpful!
I have tatsunoko Vs capcom running perfectly with no stutter or caching using mmjr, a really great game!
Can you make a guide for wii controller setting especially for metroid prime trilogy and spiderman shattered dimension? And if you can test metal gear solid 3 snake eater?
I only play Muramasa & Nights - Journey of Dreams, they run at 50-60fps, with some teaks. :)
It's awesome that it can use the gyroscope for shake and tilt. I've been wanting to play some wii games like excitetruck and was wondering if it would have that functionality.
Thanks for the awesome video, I'm gonna try this settings ASAP to play Mario for the Wii. Mine runs super slow and sluggish but i have not adjusted anything yet. BTW how did you get the shake and gyros to work? Could you please show the controller mapping for that please?
Once I get time I may do a super quick video showing how some of those options work. For now I recommend changing your settings, especially i it LOOKS like you have them right, then save an change them back. Dolphin and controller settings don't play nice.
I have my RP3+ and had NO idea Wii emulation was possible at such a smooth speed 😯😯😯😯 downloading my legal ROMs today
Ro much pissi g around though. Less pissing around with GameCube. I have up o wii, to much bother
Hello, how's the battery life when exclusively emulating Wii games from a full charge? Does it last 3 or 4hrs?
Holy crap if I can get NSMB Wii working on this thing, I’m gonna be so happy!
Shocking, isn't it? You will get it working and you will have a blast playing it on the go.
@@MjolnirStone reflecting on this wii video now, and noticed I never really thanked you for it
It's a great video!
Thanks for actually doing it even after the harassment
@@sauce_legend1186 Hahaha no worries. I am happy to help, even if I whined about doing Wii. :p
@@MjolnirStone lmao, just know Ill be using your settings.
Will be saving me a lot of time :))
@@sauce_legend1186 Happy to be of service, especially to the Legend of Sauce.
For tatsunoko vs capcom I found turning off " arbitrary mip map detection" under enhancements and setting shader comp to asynchronous/ skip drawing fixed a good bit of the mid fight lag on attacks and assist calls. Haven't gotten a concrete number on over/underclocking for gameplay improvement yet.
Any progress? Do those things work well on other games?
@@gusonian8637 I haven't tinkered around as much on my rp3+ as what I want to play has been mostly set in and going beyond on games that are iffy, to unplayable I haven't much been concerned on. But, the RP3+ has gotten an update for a bit more overhead by setting a system overclock in it's android menu (where you'd find bluetooth or brightness settings) to changing the system to performance or extreme mode to run better. It's not perfect still, so don't expect miracles but, aside from back and forward tinkering, setting the RP3+ to extreme and seeing what you can now get out of it is an option for anything you'd like to get running better than at base.
@@ginD4th that is wonderful, I had no idea. How long has that been a thing? Thanks so much
@@gusonian8637 The performance options update has been out for almost 5 months now. It gives new life to the rp3+ and going back to some of those problem games with the system set to performance mode or extreme mode. Not everything in the library works but the ones that were just a bit stuttery may yield different results.
Great stuff. Thank you! Can’t wait to get my RP3+. Meanwhile I’m enjoying my RP3
I loved my RP3 but I am loving RP3+ so much more, and thank you!
Hi! which cpu % are you running on New Super Mario?? Im not able to reach 60fps/100% like you on my rp3plus!! Thanks in advance!
Thanks for this! I know you skipped over the Wii and GameCube controller settings but is there any chance you can do a video to show these or point me to the recommended settings please?
I probably will. I do think it needs to be a guide on its own anyway. Stupid Dolphin controller settings.
@@MjolnirStone Thanks very much, trying to get my head around the settings is giving me a headache 😂 keep up the good work, been following all your settings guides and working through them for getting the most out my RP3+! 👍🏻
@@SirMuddyToast The biggest advice can give you is that Dolphin is a liar. Don't trust it. Even if it says the setting is correct, change it to the wrong one, save it, and change it back.
Thanks for the showcase!
You're welcome!
For DKC Returns try the 3DS version. Same goes for other Wii/Wii U games ported to 3DS.
Yeah gotta thank you for this video bro 🙌
Any time!
What's your controller configuration
Impressive and very good video. Thenk you! 👍
Thank you! Cheers!
cant seem to get the input to work...
Do you have a guide on how to setup wii controller. i am having issue settign it up like the shake function
So you know that time when you turned in homework and immediately realized you forgot to include one answer? That's this. I absolutely intended to mention how to do that but forgot. Luckily, it isn't that hard. The key is to look for "Motion Controls" in MMJR and then set it to "use device sensors (without pointer emulation)" and you should be good to go.
I will also add that in general Dolphin can sometimes be weird about remembering your control settings and also lie to you. So if your controls aren't working right and you check the settings and they look right, ignore it. Change them to the wrong settings then back to the right ones. It often shows one but isn't always accurate.
Also, I will add this info to the video description. Thanks for the reminder!
@@MjolnirStone thanks for the help.
@@MjolnirStone I saw the Motion Controls during gameplay and on overlay controls.
Thanks mate! I know Retroid are having stock issues so I hope I get my RP3+ before Christmas!
Would you recommend using PAL versions of Wii and GameCube games when possible? Or is the screen-tearing due to the screen being 60hz too much of an issue?
Fingers crossed!
It really depends. Most of us are using PAL for testing these higher-end systems because they are most likely to play at full speed due to targeting 50fps rather than 60. For Wii it is especially nice since many of them also have a Pal60 mode meaning you have a choice. Of course generally I would prefer NTSC and if a game runs well at 50 I will usually test NTSC and keep that if it also runs.
As for screen tearing I wouldn't worry too much as most of these emulators have functionality to reduce that (vsync, duplicating frames, etc.).
Great tips. Not sure if you'll see this, but maybe. Anyway, have you heard of issues where the left analog won't be detected on Dolphin for Handheld? L3 works, but when trying to set left/right/up/down, it doesn't register at all. It worked when I first set it up, but subsequent attempts have been fruitless. MMJR works just fine, but Dolphin for Handheld isn't behaving. Thanks in advance! Good video!
I will see it! Unfortunately I haven't heard of that issue, and I spend a lot of time in the Retroid Discord. What happens when you delete the app and add it again? It almost sounds like it is switching you to another control scheme without telling you, which Dolphin likes to do in my experience.
@@MjolnirStone Reinstalls don't seem to do the trick unfortunately. Worked when I installed and set it up out of the box but not anymore. Currently impossible to map the left analog movement to anything, only the L3 click works for some reason. This is only an issue for Dolphin for Handheld and not mmjr2 which is odd. Driving me up a wall, haha.
@@Cylicon That is a very strange one. If I ever encounter it and solve it I will definitely let you know what fixed it.
I have the same experience and using DFH. I only have Mario Kart and you can’t steer the car. So annoying. Will have to switch to another emulator I guess😢
So will non PAL roms just not work correctly? I have a few downloaded that are USA based (in the process of getting my library ready for when I order the RP3+ later this month) and want to make sure I am getting the correct ROM type
Thanks for showing Tatsunoko Vs Capcom🙏👏✌
I aim to please.
Really great video, thanks. How would I implement all this tinkering through Daijisho?
This content is fantastic! Would you be able to do one for PS2?
Your wish is my command. Done!
Which laucher is that? Can you select a different emulator per game on this one? thanks
Thanks a lot for showing New Super mario wii
My pleasure! With the right version of Dolphin it runs like a champ.
this is great to know and see. i love wii emulating. mario bros looks great, but inconsistent with other games. tempting, very tempting, but i think sooner than later theyll have an rp4 that can do it much better
Always something better coming eventually. For me, I didn't buy it for Wii emulation so any of that is just a bonus.
What are your settings for New Super Mario Bros.? It wasn't mentioned in the video. The game feels real sluggish for me even at different clock speeds Thanks
Ive been playing web of shadows wii and cant seem to get the perfect settings. May I ask for that game to be included in your next review on rp3+?
Thanks
How much better is all this with the update for performance that released 5 months ago?
Great video. I am actually looking for a device to play Wii and GameCube games along with everything else out there.
This one will get a lot of GC and Wii games playable but admittedly not perfect. For the price I thin it is the best option and if you are on a budget I think nothing else comes close.
new super mario bros looks awfull on my retroid p 3+ with your same settings in mmjjr2 any advice that maybe i forgot ??
I can't get Wii working at all with the controls ... can you do a video where you map the Wii and Nunchuck controllers?
How much the app cost to use to play those games and what is it called
I wonder what to expect from the new 4 pro.
Thanks for your video. I will for sure buy the RP4...cause the 3+ is so close to be really awesome. What kind of SOC could they use as a successor of the T618?
Don't expect a successor to arrive as soon as the 3+ did - that was just because of the 1 year delay sorting out all the issues with the 3 units.
I hope the demencity 900. The Odin light processor. It handles GameCube and most wii and ps2 really well
Any help on MMJR just closing right after installation? I tried uninstall/reinstall/clear cache twice now of version 11505, from the GitHub page listed in the GC guide. I even tried v11485 of the app, no dice. I was trying MMJR since MMJR2 gives so many glitches and lag.
(Huge thank you for these guides. I have followed them for the lower systems and running great. Got my RP3+ last week & love it!)
Game for Nintendo Switch ?
Some indie games work fine but most others don't. I don't currently have any plans to do a Switch video as there just wouldn't be much content to show and most of it (Sonic Mania, Hollow Knight, etc.) already runs on Android anyway.
How do I change the controls from touch screen to using the physical buttons?? Thanks
What setting do I use to play Call of Duty Black Ops?
Hi, can you explain us how you do to have mariokart Wii with MJRR without the blackbox glitch please? Thank you
Do you have luck on playing using TOUCH IR? I can't seems to make it work using MMJR nd MMJR2
It should work but probably breaks every time you launch the emulator. Try changing it (even if it says it is set correctly) and then change it back. Honestly, I just avoid any games that need that feature.
Thank you! This settings worked amazingly, I still can't get the gyroscope and shake to work though.
Glad it helped! Did you try what I suggested in the description of the video? It really should work once you do that.
@@MjolnirStone I did and it worked, thanks! I found the motion settings under the overlay control settings and did as described. The only semi issue I still have with tilt is that it has the layout vertically instead of horizontally. So it always thinks I'm tilted towards the left lol
@@alejandrocardona4410 That's weird but not surprising. Probably had something to do with the orientation when you turn it on or whatever. Dolphin is so annoying with controller settings but glad it is "mostly" working for you now!
My rp3+ wont let me use the buttons for the wii emulator dolphin I can only use the onscreen buttons how did you set up the buttons?
next to settings you will find the wii controller icon, choose the controller 1, disable it then enable it again. It will open the setup menu
This device is almost there. But not yet. Waiting for RP4 for perfect Wii gaming.
But then you will be waiting for Switch on RP5. It is a dangerous cycle. :)
Hi
I ve noticed Lego Batman on Wii is not working with horizontal controller is it possible you could find out cause the games looking good on retro 3+ TIA
I just don't thin that game supports horiontal Wii remotes. You need to use the nunchuck.
I know we've all been focused on the more modern consoles but the gyros have me wondering... is there a way to emulate the GBC and GBA games that had gyro cartridges, stuff like Kirby Tilt N Tumble, Warioware Twisted or Yoshi Topsy Turvy?
yes, in Retroarch there is a setting to enable the motion controls on GBA games but there is no way to change the sensitivity and its really high by default. I'm sure with some getting used to it it may be playable tough.
Glad someone had the answer for you! Honestly, it isn't something I had tested.
Hi how do you turn off the touch screen controller set up on screen.I would like to use just the retroid dpad etc. cheers
If you are using MMJR2 (in my guide) you can pull up the menu in a game, choose "overlay controls" and then toggle controls. Just toggle all to turn them all on or off.
How to on controllers?
ugh i wanted to see how to setup the inputs wii is so confusing with the nunchuck
That is mostly Dolphin being trash. Do not trust what it shows you. Even if your settings look correct, Dolphin lies. Change it to the wrong settings, save, then back to the right settings. See if that helps. I will also do a video ONLY about this as soon as I get time.
Can you do ps2/gamecube settings guide for the odin pro too?
Haha...I will do videos for both systems on RP3+ but unless AYN sends me an Odin Pro I don't have one. :(
so in general wii games are still not playable in a good way with the 3+ but they are on a good way and most of the games before nintendo wii are playable which still is pretty good for a handheld for 150$
A surprising number of Wii game play pretty well and I think you are right, for the price it's a darn good deal!
@@MjolnirStone i am really looking forward to my 3+. but i guess i will have to wait till next year. i ordered it in the end of november
does the rp3+ have vibration?
It does!
Is caching shaders dependent on SD card speeds ?
Did you ever find the answer to this question?
Still waiting my device....
I hope it arrives soon! They are shipping them as fast as they can from what I see.
Honestly, gonna just wait a generation or 2 until i can play any gamecube/ps2 rom i want to play without having to individually toggle settings for each specfiic rom i will need in order foe the game to be considered playable.
Always an option, but then you will be toggling options to try to get PS3 games to run. :)
@@MjolnirStone good point.
whats the point of getting pal roms if you are just going to force 60fps lol
You get the PAL roms to have the option of running at 50Hz if they don't quite perform well enough at 60. Of course, if space and bandwidth are no concern then go crazy.
so you d recommend playing resident 4 on wii instead of gamecube ?
Alright. Where's a good place with a how to on the button mapping for the motion and shaking. Can't enjoy wario land shake it without being able to shake it. Lol. Help me out fella
If you are using the fork of MMJR in the video description, when you are in a game pull up the side menu, go to Overlay Controls, then Motion Controls, and set it to "use device sensors (without pointer emulation)" and see if that takes care of it for you.
@@MjolnirStone that worked. Boy the looks i got from the wife last nite when playing in bed. Lol
Hi there I seem to be having trouble using GameCube controller with new super Mario for the wii I emulated it but not getting anything.mario kart works but not Mario any help appreciated. TIA
Not all Wii games support the Gamecube controller. I suggest switching it to Wii remote horizontal.
Thanx will give it a try 👍🏻
@@tamwalker5807 I am confident that will sort it out for you!
Hi there how do
You change to Wii horizontal please.
Thanx for the info went and got it..yasss
First time in years doing this retro stuff last time was with my daughters ds ha.
Your videos and comments have helped a lot thanx man!
Playing Final Fantasy XII tô ps2 ! 🙏🏻
ps2 setup video, when?
When it's ready. AetherSX2 is very complicated with a ton of options that impact performance. It will take a bit longer to properly learn the ins and outs so I can be sure to present the most crucial information.
😃👍
Why thank you, stranger!
I canceled my pre-order after releasing how scammy this company is. Shame that this is probably the best retro handheld you can get.
Scammy? How so? Because you didn't get the system as quickly as you hoped?
@@MjolnirStone Nah, I can't digest the fact that a new device came out before receiving a preorder on a previous one.
RP3 was advertised as a cutting-edge, budget-friendly handheld, and before my order arrived, RP3+ was ready for preorder.
This made my new device already outdated lol.
I still placed a preorder on the new model and it still hasn't been dispatched. knowing their marketing strategy, they are going to announce a new handheld in Feb 2023.
What a lot of pissing around, to much mucking around with wii. I ditched wii, not worth it
Curious how Pokémon XD runs still 🥲
I haven't tested it personally but from what I have heard it runs well!
My GameCube games play like shit. I don't know what I'm doing wrong
Sorry to hear that, Ashton. My GameCube settings guide will be online in about an hour. I hope that helps!