How To Install Trex Rain Escape Deck Waterproof System - Colorado Custom Covers & Decks
HTML-код
- Опубликовано: 11 сен 2020
- Learn how to waterproof your deck with the Trex Rain Escape System. This waterproof system uses a network of troughs, spouts, and gutters to divert water from your deck. It also shields the area below the deck from rain, snow, sun, and other elements. Most importantly, Trex provides 100% protection of the deck substructure from moisture.
Watch our complete guide for installing the Trex Waterproof System: • Deck Building Guide: H...
DECK BUILDING CHECKLIST
Vetting a deck contractor isn’t easy. Download our checklist for 10 Key Considerations When Building a Deck. It’s free!
Get the checklist at build.coloradocustomcoversand...
CONNECT WITH US
Subscribe on RUclips: @coversanddecks
Facebook: / coversanddecks
Instagram: / colorado_covers_decks / @colorado_covers_decks
ABOUT COLORADO CUSTOM COVERS & DECKS
Colorado Custom Covers & Decks builds luxury decks and patio covers for homeowners in Morrison, Evergreen, and nearby locations throughout Colorado. We know what it takes to get the job done on time, within budget, and to your specifications.
View our portfolio at coloradocustomcoversanddecks....
Request an estimate at coloradocustomcoversanddecks.com
Very interesting. I did a diy of my own version of this using vinyl house siding. I found over the years with my pine trees lots of build up of dirt on them. This looks like it will do a better of job washing carrying the dirt and needles away.
Thanks
Previous owner did the same thing, they got so full of gunk that they were falling off
What about debris over the years as it will add Weight, and hinder drainage?
What happened to the blocking boards? Did you cut them out?
I would worry about water pooling on the membrane and not draining away. This assumes I don’t fall and break my neck while trying to maintain my balance. A few temporary beams perpendicular to the joists could be a safe platform 🤔.
Great instructive video! In the first portion of the video you can see blocking of the joists over the beam. In the second portion of the video where they're installing the rainescape system it appears that blocking has been removed in order to fit together the troughs and downspouts? Is that code compliant?
No way. I came to this video to see what to do when there's blocking or when the joists are less than 8" apart. but they skipped over that part.
Just did some more digging around. Found that the trough should drop down 4" at the end of the pitch. Which means, somewhere in the middle, it will have a 2" drop. If you have 2x8 deck joists, you can get away with cutting out the old 2x8 joist blocks and replacing them with blocks ripped down to 5". But I wouldn't rip them down to anything less than half the depth of your joists.
I have a 16’ x32’ deck build and this will be my first time using Rainescape. I will have about 14’ to the main support. My deck package shows solid blocking in the center of that 14’ trough area. Do I just run troughs in both directions from the center blocking or can I use metal x braces and the trough wouldn’t need much pitch in seven feet and x brace in the center would suffice? Have you run into this issue?
You can do that or after rain escape is installed you can install small roll blocks that will clear the rain escape.
I'm assuming the butyl tape when screwed through doesn't leak? Nice, thanks for this
The butyl tape is designed to self seal.
I'm assuming you had to cut blocking for slope, I noticed it was left out
A highly regarded contractor (customer ratings) in my area said he "got out of the deck waterproofing business because the systems don't work...he had a lot of callbacks after installing them.
mmm that's a bummer! A major problem with leaks is improper decking and rail installation after rain escape has been installed. Definitely have to take your time and be mindful of the screws. Thanks for watching.
@@coversanddecks Even the best contractors are under constraints of time and more recently, their ability to find qualified employees to do the work and pay attention to craftsmanship (fit & finish).
I'm a DIY perfectionist....I'm good, but I'm real, real slow. Contractors who go that extra mile are generally less competitive than the run-of-the-mill types and their customers tend to be limited to those who appreciate top quality and are willing to pay for it. I'm sure if done properly and with some degree of "perfection" good waterproofing results can be obtained.
How do you install with picture frame?
It shouldn’t matter because the waterproofing is joist specific. Gravity determines the water flow
Why are you installing this product on a covered deck? Seems like a waste of $$
thanks for watching. we actually install this a lot on covered decks as snow and rain will still come in. Also, the main feature of this product is that is protects your joist from rot and will never have to be replaced.
What is the pricing on this as a proposed upsell? So how much is product for like 12x16 deck and how much labor hours are in it? Just now seeing this, awesome idea. We been offering the older ways of doing the rain into gutter system.
Can use water proof joist tape to protect from joist rot
It's also useful if you are using the space under the deck and want to keep water and spills from falling on someone's head. If you got the extra coins install it.