AMAZED again! Finally got to see you switch over to a remote control unit to eliminate that ridiculous tether I saw in previous videos. This, my friend, is EVOLVEMENT at its finest. 1) If you wanted this "bogie robot" to operate forward/reverse, you should arrange the centrally mounted battery in a suspended cage. 2) I'd consider mounting all electronics underneath the chassis for protective measures. 3) I'd employ complete lateral symmetry. Make the front paired legs the same as the back by making this an 8-wheeled buggy. 4) Consider adding some suspension system with mini-shocks (you could design these yourself and probably will). 5) Extending the top cab portion would allow this to be useful as per a transport vehicle. 6) Ship a working model to NASA with a card reading: See, it doesn't take much engineering to make a cosmic buggy. Give me the $100 million contract and I get to keep what's left over or about $99,999.00 or so.
I have got to say that you are very creative. I have been looking at 3-D print plans for different rovers and thinking about the time required to print the needed components. Never occurred to me to use PVC. So quick - could assemble this in the time to print a single component. Great for quick prototyping. Much respect!
Hey - upon further analysis, I determined you could vastly improve the way you mount these wheels to your chassis. 1) Attach PVC tube that slips over motor and attach and upright facing PVC elbow to this. 2) From there, you join top of elbow to bottom leg of your chassis. Another improvement - to hide all your coiled black wiring. Simply solder these to the wheel motors BEFORE beginning assembly, and slip the wire inside cavity of all PVC tubing. My ideas would a) protect the motor from damage, b) keep the wires from being tangled into something that the underside of the chassis might come across, and c) prevent the notched pieces of PVC tubing (where you snaked a hose clamp through) from causing a catastrophic failure from being weakened. If the motors were run hard and showed signs of thermal warming, you could ventilate the PVC collar you slipped over them with tiny drill holes (1/16" or so). Maybe you could make Prototype # 2 of your Rocker Bogie Robot, sir, using some of these recommendations.
Great, but can do you where i can purchase the remote controler he used, by looking at other comments, some have suggested this one : robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB& but it is quite different from the one used in this video.
+ELECTRICAL GURUJi sir did u use that remote?? Is that working? would u pls upload a pic showing how to connect motor wires to the remote channels. pls sir
@@satyamsikka6407 my remote keep on disconnecting after few seconds. Have tried using new aaa batteries. New 12 v amaron battery. But nothing works. Help us please. Kindly contact on 9813719780 (watsapp also)
Arghya Biswas I agree. The remote system just comes out of nowhere. I know most of this can be bought at servocity.com, but I need the specs of the receiver/ transmitter
Arghya Biswas here is the link of remote controller robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB&
robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=EAIaIQobChMIw4vzlbWW2AIVWwwrCh16qAVfEAQYAiABEgIHSfD_BwE ithink this is the right one
+Bappi Desai The remote in this link has only two channels for motor connections and one channel for power supply. But the remote shown in video has 3 channels for motors. Can i use the remote from the link. Is so howw?? Please reply me sir.
Things that I search in whole market today but I don't found ..1:-wheels..2:-45° angular elbow..3:-That thing (2 plates)which is used to connect a pair of wheel with another..
Could somebody tell me what the little piece that wraps around the motor is and where to buy it (A link would be preferred)?. I need it soon for a school project. Thanks!
Channel worth subscribing. The way you connected motors with the pipes were very poor way yet very innovative. I admire. Very nice effort Navin. Could you also give me the details of the wheels you have arranged and the Motors you have used.
Navin we bought the circuit board and remote from the site you mentioned. We are almost done completing this project but when we put the batteries on the remote control both lights are flashing. Yours on the video on has the NEGCON on. Are we doing something wrong?
Let's check out website for all major details: navinkhambhala.com/crazynk
Navin Khambhala # crazyNK
why do not you leave the materials you use !! just like I'll guess if I do not know what you're using!
Aku beli keteyatifitasmu jual berapa aku beli
Which place do you live
Navin Khambhala # crazyNK 👍👍👍👍$sahil
Oolllo
AMAZED again! Finally got to see you switch over to a remote control unit to eliminate that ridiculous tether I saw in previous videos. This, my friend, is EVOLVEMENT at its finest. 1) If you wanted this "bogie robot" to operate forward/reverse, you should arrange the centrally mounted battery in a suspended cage. 2) I'd consider mounting all electronics underneath the chassis for protective measures. 3) I'd employ complete lateral symmetry. Make the front paired legs the same as the back by making this an 8-wheeled buggy. 4) Consider adding some suspension system with mini-shocks (you could design these yourself and probably will). 5) Extending the top cab portion would allow this to be useful as per a transport vehicle. 6) Ship a working model to NASA with a card reading: See, it doesn't take much engineering to make a cosmic buggy. Give me the $100 million contract and I get to keep what's left over or about $99,999.00 or so.
I have got to say that you are very creative. I have been looking at 3-D print plans for different rovers and thinking about the time required to print the needed components. Never occurred to me to use PVC. So quick - could assemble this in the time to print a single component. Great for quick prototyping. Much respect!
Hey - upon further analysis, I determined you could vastly improve the way you mount these wheels to your chassis. 1) Attach PVC tube that slips over motor and attach and upright facing PVC elbow to this. 2) From there, you join top of elbow to bottom leg of your chassis. Another improvement - to hide all your coiled black wiring. Simply solder these to the wheel motors BEFORE beginning assembly, and slip the wire inside cavity of all PVC tubing. My ideas would a) protect the motor from damage, b) keep the wires from being tangled into something that the underside of the chassis might come across, and c) prevent the notched pieces of PVC tubing (where you snaked a hose clamp through) from causing a catastrophic failure from being weakened. If the motors were run hard and showed signs of thermal warming, you could ventilate the PVC collar you slipped over them with tiny drill holes (1/16" or so). Maybe you could make Prototype # 2 of your Rocker Bogie Robot, sir, using some of these recommendations.
No components are special... But the result is AWESOME.
Truly great design, this type of
chassis can be incredibly useful for many robotic projects
Aap logo ki hardwork se Indian youth technology me aage aa raha hai brilliant job
Sir you have different level of creative. Just awesome ideas
Oryza sativa
Oryza sativa
sahil 👌👌👌👍👍👍☺😊
@Talk To Tech who are you?
I VERY VERY VERY VERY LOVE THIS VIDEO!!!!....😎😎😎😎
This is an awesome project. We're going to try making some outfits for it with the FormBox!
Greetings from Turkey. There are many videos on RUclips but what you do is great. Congratulations.
great!
now send it to mars
OK...
I like the way you built it all up using just PVC pipes :)
Amazing sir Make a robot like a car in which 2 persons can sit
viresh talkar
hahahahhahaa
Kavita Choudhary h
Do you have any ideas on how to make a power wheels two seater run faster?
Nemy Nigam आया
Nemy Nigam आयु पंसारी
Wow bro best car 👍👍👌👌👌😊😊😊😊
This could be so useful for our armed forces. ..bro u need to be in DRDO...jai hind bro
You wrong tho. also he didnt invent this. just copied it.
REALLY REALLY REALLY REALLY SUPERB!!!!....😎😎😎😎
what a great idea. you should make the body
Which board
AMbros Custom which board it is
AMbros Custom
vito AJD ١
vito AJD ت
this is probably one of the most inspiring youtube robots there is
From where to buy the wheels?
fsd
you don't also happen to know the board, and motors do you?
Tell me battery capacity with PVC pipes rocker boggi
12 volts bikes or scooty battary
Energy Rovers
Wow well done really well done
success always for ....."Navin".....sampean memang hebat
you should also list the product used in the video and where can we find them?
h
Yes sir pleas tell us about their all information
See the description .In which he has given link of website you can get list of product and their link from their .
My fav experiment in this channel 😉😊
Hi friend,GENIAL. do you have the link where you buy the pieces? Wheels, motors, electronics, etc. thank you so much
ERNESTO AUGUSTO did u get the reply from him?
no
In India we use Amazon or eBay
MR ANONYMOUS AliExpress
Great, but can do you where i can purchase the remote controler he used, by looking at other comments, some have suggested this one : robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB& but it is quite different from the one used in this video.
देसी जुगाड़, सरल एवं सराहनीय |
Indian magic - simple yet appreciable.
NK, you are an inspiration for STEM entrepreneurs in India :)
Please give links to buy all stuffs specially motor, and remote control
Please give things to buy all the stuff of specially motor and remote controller
Yes!! Brilliant work. Keep on building...
Awesome project
Nice Dude, Nice. Simple and Easy to start. Good Job.
Can you give a link from where I can buy this wireless and remote....
Superb video, impressive presentation , thanks man
I needed some material can u help
Actually the ring king of thing used to fit the motor . Please send a link
I love your videos, knowledge, imagination and creativity.
what is the circuit board u have used and remote
please give reply soon ...
because i need to submit my project by 1 week
What about your project...It passes 2 years but no one replied 😂😂
@@the.shlok__ 😂😂😂😂
i want rocker bogie wheel inf...u have already done project know....please tell me....
One day you will become a great scientist
Bro this is totally amazing.... My channel does similar content in this is super interesting👊
Nice job using readily available materials!
I love the design! But I get stumped on how to make my own with a motherboard
It's actually very easier than you think.
You are a very clever man, all the best from the Bangladesh
Thanks from India
Can anyone plz tell me about the specifications of the motor used in this???
It will help me to find the right one.
Its Very Batter technology 👏👏👏
superb work and superb robot but what is the use of this robot for which work u can use this robot plz reply
TECHBOY ABHISHEK .
your car is so nice how you have made
it is a stair climbing car
It's for mars it's supposed to drive on mars
Wow dude..simple an 😎 cool
awesome 👌👌👌
you are awesome man , brilliant job 👏👏👏👏 keep it up
Where i get it this remort?
BGM Life search on robokits India you will get I have already purchased
+ELECTRICAL GURUJi
sir did u use that remote?? Is that working? would u pls upload a pic showing how to connect motor wires to the remote channels. pls sir
@@satyamsikka6407 my remote keep on disconnecting after few seconds. Have tried using new aaa batteries. New 12 v amaron battery. But nothing works. Help us please. Kindly contact on 9813719780 (watsapp also)
I have watched all ur videos and am inspired
send link for remote control system
PIYUSH ARORA I don't know why this guy is not replying?
I too wanted to know the same!
Mujhe bhi remote control system chahiye
It’s Aurora not Arora
Your Ideas are at cool level
From where to get the remote control
Pero cual es el nombre de la tarjeta. O del micro controlador
Arghya Biswas I agree. The remote system just comes out of nowhere. I know most of this can be bought at servocity.com, but I need the specs of the receiver/ transmitter
Arghya Biswas here is the link of remote controller robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=Cj0KCQiAjO_QBRC4ARIsAD2FsXMJex0a8ZTBq20qIdLCQb1vioGGBk2vWoWXmf4y1EG8UsyBFpRWq6EaAk9PEALw_wcB&
robokits.co.in/control-boards/wireless-robot-controllers/rf-2.4ghz-multi-channel-remote-for-2-dc-motors-5a-drive?gclid=EAIaIQobChMIw4vzlbWW2AIVWwwrCh16qAVfEAQYAiABEgIHSfD_BwE ithink this is the right one
+Bappi Desai
The remote in this link has only two channels for motor connections and one channel for power supply. But the remote shown in video has 3 channels for motors. Can i use the remote from the link. Is so howw?? Please reply me sir.
Awesome 👌👌👍👍
Wao
Nice work bro!
sir aap motar kahase late hi plz batayo 😎😎😎
Does copper bearing means that ....The bearing that is equipped over the motor shaft ??? Plz respond quick
Excelente Gracias 😊
Great work brother
Nice yaar👍👌
awesomeness unleashed
Awesome manufacturing dude
This is really helpful for everyone
Can it go up a curb when approaching at an angle instead of head on?
It's incredible sir.
You should send it to Mars ! 👍🏼😊
Is there a way to access the website now? I'm looking into the rocker bogey design for my senior design project
Muy bueno son tus trabajo gracias por compartir🖒🖒🖒
Well done man
It might be feasible to pass the wires inside the tubing?
What type of card is that? H-bridge only? Very interesting. How to get more details?
Excellent work !
Really awasome man
Awesome bro😎
Thank you so much for the inspiration and step by step instructions. I can’t wait to try it out with my kids that are very interested in STEM.
What RPM are your gear motors? Slow and steady really does seem to be the way
Too good! Nice video! Will try to build one for my son.
Which motor controller did u use...is it ln293d or ln298n??
Things that I search in whole market today but I don't found ..1:-wheels..2:-45° angular elbow..3:-That thing (2 plates)which is used to connect a pair of wheel with another..
Yes we cannot found even online marketing
@@johnsikma2776 *yes..Bro.I have to submit it till 30 sep but I have not started making it yet because I can't found things..*
Wow this is fantastic!!
Great job I like it very much !
Very skilled man
awsome idea i like it .well done!
The elbow pvc pipes have a larger diameter than the normal pipes. Wich one has size 25mm and what is the other diameter? Thanks!
cool idea❤👌
Great job. Are the motors running at 100 percent speed in the video?
Which motor they usee..and could tell it's ratings
Very great work done Nabin bhai. But plz tell me the name of the black device u placed on it and how to make its connections.
Could somebody tell me what the little piece that wraps around the motor is and where to buy it (A link would be preferred)?. I need it soon for a school project. Thanks!
Ingenious use of pvc pipes & hose clamp
Channel worth subscribing.
The way you connected motors with the pipes were very poor way yet very innovative. I admire.
Very nice effort Navin.
Could you also give me the details of the wheels you have arranged and the Motors you have used.
extraordinary work Nice
Can I use 6v motor (30rpm)instead of 12v
Wow, thank you. You taught me something today. I appreciate that. You have a clever mind. The end result is very satisfying.
it looks like mars rover, Good Design Awesome work..
You have made a very good with a fantastic idea
Where can you buy the shaft connectors to the tires and the tires too? Thanks
@navinkhambala what volt of battery did you use
Navin we bought the circuit board and remote from the site you mentioned. We are almost done completing this project but when we put the batteries on the remote control both lights are flashing. Yours on the video on has the NEGCON on. Are we doing something wrong?
Amazing superb wonderful
Sir plz tell about the version of battery used in this model..
With tyres which type of motor are you using please clarify tyre and motor arrangement in detail.