Update and Announcement Video... I'm Out Riding...
HTML-код
- Опубликовано: 12 авг 2023
- If you would like to support me and my projects, I have created a Patreon account. Regardless of the amount, every bit helps, will be put to use and is awesome motivation. Thank you so much !! / joel_a
I now have some awesome merch available here. spark-bolt-city.creator-sprin...
My second channel, Lowered Expectations, for extras, bonus clips, and random nonsense. / @loweredexpectations4927
Actual description: I've been busy with stuff... lots of stuff... some I can talk about and some I can't... I'm headed out to the lake as soon as this video goes live, fingers crossed my cylinder head doesn't explode.... or my head... 
Авто/Мото
0:25 Lol, you got me really good at the beginning! Good luck today, hope the ride goes smooth and you feel better soon! Enjoy your time with the JS Brothers!
Sorry for that, haha... no more jetskis, haha. Time with the JS Brothers is always a good time. If nothing else... my ride today was interesting !
You're lucky your head is still attached! That thing feels like it would give you whiplash, just riding it through the air! Haha. Hope Steph's doing better! That's crazy from a small scratch getting infected like that. It'll be interesting to hear if she can tell you any things to look out for with scratches that we just don't know about! My jetski scratches me in some way every single time I get on it! That being said, I sort of figured out how to get it to sub, now I just gotta figure out how to hang on while it goes under! ;) Can't wait to see what you guys get into down at the JS bros!
Yeah, I guess I should be surprised it doesn't hurt me more often... it is like riding a ... mini 1100cc jet ski...
Steph is a trooper. I get scratches and cuts all the time... it's crazy... I'm not sure but I think she was spending a lot of time in public places, hot springs, water park type stuff... perhaps also wearing bike pads. Some day I will ask how she thinks it happened.
Excited to hang with the JS Bros... Always up to something interesting.
Sounds like you have had some more interesting times. I’m looking forward to having you over for a visit. Should be fun. Sorry buddy no video this week
Always interesting times. I'm excited to come hand out with you folks ! If you just made a video where you talked to the camera for 15 minutes about why you didn't have a video, then you'd have a video ... lol... Except that I'm not sure it's the best idea.
Nice, I hope I get to see you soon ❤️
Yes... I suspect I will see you soon... and well all lived happily ever after.
Bad idea to sell a mill without replacing it with a better mill.
So then ask yourself ... what is Joel really doing ... ?
YOLO!!
🤟
Great shirt
It’s missing a cylinder thou!
@@Trevorkloida It will have to be updated, haha.
Thanks... I made it myself... Currently on Tspring, haha.
Hi Joel, i would like to race you with my Kawasaki ultra 150, it has a triple pissa mod, has a worx ride plate, and worx sponsons , has a new jet nozzle upgraded, carbys have been rebuilt and race tuned, has a top speed of 110 kph,, it absolutely fly's on the water, keeps up with the newer ski's , anyway have a great holiday with the jet ski brother's, i will be watching, sounds like fun but don't hurt yourself, ha....ha...ha..., Cheers mate
110pkh ! Wow... that thing rips ! You would beat me on top end for sure.The impeller I have is built for acceleration, and it does that really well... Some day I might put a taller impeller on it and see how fast it will go. I'll try not to hurt myself again, haha.... and I will have a lot of fun at the Jet Ski Brothers.
Oh no not the mill!😂
I'm sure you know what's really happening here.
@@JoelArseneaultRUclipsyour secret is safe with me. I like what you did there at the end tho ooohhh the suspense shock horror. My mill always gets me in trouble to.😂
@@lanceulbrich6249 Haha... I'm so clever.
Where’d you get your mat kit?
The turf that’s on my X2 ? I found it on Amazon. It’s not great but it was worth buy meant to be temporary.
@@JoelArseneaultRUclips was it a kit for the x2 or just a sheet?
@@SoberCramer Just a sheet ... It has a LOT larger diamond pattern than the Jet Ski stuff. Cutting out out yourself is not too hard... You just need to make a template from cardboard or plastic first.
lol Bob Seger wrote that song.
Yes, I know, haha ... but Metallica are the ones who sue everyone 🤣
@JoelArseneaultRUclips lol 80,000 million dollar record deal and still they sue and end Napster because it could hurt future revenue... definition of being sold out. Metallica 👎
@@AtimatikArmy Funny.... all of the things they did as a band, and this is what they will be remembered for 🤣
I basically only buy stuff on Ebay. There sellers are not allowed to be sluggards. That sucks when companies can't do what they exist to do! In the past couple weeks I blew up or broke a bunch of my stuff. You order parts, get half way into something then find another part you need. I hope selling the mill is the right move. Does that mean you don't need any endmills or square stock? Sounds like you're bringing the X2? I hope it survives!
I haven't had too bad of luck with timing on Ebay, but I have had issue with sellers selling me stuff that wasn't the right part at all... Like the piston rings for your engine. That's always the way it is... you just place your order and then find 3 more things you need ! haha.
I will be selling my mill, but I will need as many endmills and as much stock as possible ... We will talk about it when I visit, haha. I really hope the X2 is up to the task... I had it out today and the crank is getting a little loose ... I took it apart to inspect and my pistons were touching my domes 🤣 ... I'm running way more squish than I was on my original modified head... but the crank is moving too much apparently.
Damn, how tight are/were you running your squish? Isn't around .040" or somewhere thereabouts ideal? You must be WAY tighter than that if you're making contact after some wear!
@@AtimatikArmy Ideal squish is just enough so that you don't touch, as long as you get some of the other details correct. On drag racing engines we would remove gasket till we had touch on, a fully warmed up engine, at max rpm, and then add .003"
My squish was around 40, but due to my crank being sloppy that 40 isn't really 40. When you check squish you are loading your crank bearings, pins, rods etc. Once the engine is then running the play that added squish is now subtracting squish. An unevenly supported crank is going to have more flex and overall movement. I'm not surprised it touched.
Last year on my modified head with a good crank, I was running .035" and never had any issues. On my 650 I was running 28-30. The main concern with squish being small, when modifying, is making sure that the squish velocity isn't too high. This can be with a taper that is a degree or so more than the angle of the top of the piston. There's a lot to it. I'm basically throwing stuff at the wall and seeing what sticks, most of the time.... and using a little experience to fuel my ideas, haha.
@JoelArseneaultRUclips Got it yeah that's cool. So in a perfect world you want squish to be basically just shy of making contact. In a practical sense, that may be why I've heard the number .040" kicked around because it's a pretty difficult thing to calculate changing errors like wear, etc. .040" is probably a pretty safe general number to shoot for for motor builders. On my 550, I don't remember exactly but it was rather high, like .150" so we decked my head .100". Then the problem was way too much compression so I knew i had to make my domes larger but could leave the squish band alone. So I ground a spherical shaped form cutting tool, held the head by the spark plug in a 4 jaw chuck and took note of how deep my cut was on the DRO so I could repeat on the next dome. Needless to say, I was very interested in your head with replaceable domes videos and your completely different approach and was quite impressed!
@@AtimatikArmy Exactly. Yamaha doesn't assemble an engine and check squish. They calculate the part dimensions to give them a reasonable squish. On a good day their engines have .070" but on a bad day they can be sure that it won't be smaller than .040"
An engine builder, building a performance engine, will actually check and verify the squish. BRP, Bombardier, Ski-Doo.... actually have a special tool. You bolt the cylinder on with the pistons in place and no base gasket. You take a reading, and that reading then tells you what base gasket(s) to use. If you buy an engine gasket set, it comes with one head gasket and about 10 different base gaskets that you add, remove or stack to get the desired squish. I don't think they even tell you what the squish goal is, you just use the tool and install the right gasket(s).
If you look it up on the internet, there is a LOT of debate about squish. What sealed the deal for me was reading an article by a former Moto GP two stoke engineer / mechanic. Most of what he said was over my head, but I understood enough, haha.
Yes... If you have a lot of volume contained in the squish that means that the ratio of volume between the squish and chamber are out of sorts. The squish area should be 40 - 45% of the total bore, but most run more like 50% This makes for a smaller combustion chamber with dependence on the squish to keep compression reasonable.
You either have access to a much larger lathe than me, or you are much braver, haha. I thought about doing that with my 650 head, but with the triple ... not a chance !
I waited a week for 3 parts totaling $30 for a project/video… just to find out they just shipped after a week… like wtf I could have had them from eBay faster… and they said parts were in stock when I ordered them… last time I order parts that I need fast from Partzilla…
Oh man, that's frustrating... I feel your pain !! The summer is too short for this nonsense.
The mill inspires you to do silly things so you’re selling it?! What? It’s all self control Joel! That tool is invaluable for small precision tasks. So you’re going to pay a machine shop every time you need work done?
Maybe I shouldn't have put this in a video, haha... I promise you... when I come back from the Jet Ski Brothers, it will all make sense (maybe before) and you will be pleased with my decisions ... Everything you said is accurate... Thanks for being real !
@@JoelArseneaultRUclips lol... can't bullshit a bullshitter!
So the reason why you moved the mill is because now that you sold the mini you have room now for a Bridgeport!!! I knew it! Joel without a mill, lol, that's funny! You aint fooling me!!
Lol... Hey, I'm not spilling the beans yet... you'll just have to wait and see. I think you'll be pleased.
@@JoelArseneaultRUclips sweet!!