I enjoyed the few videos you have done, wonder if you have considered doing some more FS2020 issues. I have had the same issue you mention a minute into the throttle calibration one. If I leave the flight running and open the settings panel in the game for whatever reason, as soon as I resume - I get full flap and full spoilers. I think I heard you say you might do a video on this. Any ideas how to fix this cos I'm right out of anything more I can do to stop this annoying intrusion. Thanks n regards, Pugwash
THANK YOU THANK THANK YOU VERY MUCH !!! I just switched from Laptop (still Alienware tho..) to my first high end Gaming Computer which I only got because of MSFS and I was freaking out because I couldnt get Engine 1 working any more. I wish I found your video sooner so thumbs up, subscribed and hopefully it helps (if everyone else did it too) so others can find this video easier. Once again Thank you very much for sharing this with us.
OMG, Thank you so very much! I've been away from MSFS for over 4 months. I got back in a week ago, and this has been driving me bat shite crazy. Subbed! I'm going to check out the rest of your content!
I must have damaged the default profile. How can I restore the default profile? Or, where can I get a listing of the default assignments for the TCA Q ENG 1&2?
If you start with a copy of the default profile it should work. The crank switch was working on the default profile for me, so I did the rest of the config using that.
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
Instructions on that came with the TCA throttle. I think there was an insert in the box or it was on their site somewhere. You still need to move them together carefully for them to stay aligned.
Try removing the throttle quadrant and then flying (use keyboard for throttle). That way you can check if it is do do with your attached device that is turning the aircraft or some other issue. I never had such an issue.
As for mine the engine on the controllers does respond but at the same time it doesn’t turn on like it does respond but it doesn’t turn on but when I want to turn it on from the keyboard by pressing Ctrl E then it will work
If you start with a copy of the default profile it should work. The crank switch was working on the default profile for me, so I did the rest of the config using that.
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
Thank you very much for this important video, as all of them are very useful. Please don't forget the FLAPS & SPEED BRAKE video. Thanks in advance
There is an easy way to fix them, just delete the assigned axis for flaps and spoilers (if you don't have the extensions)
Thank you so much, i just bought my TCA Thrustmaster set and soon after that this new update was released, i was so sad, i haven’t flown in weeks!
I enjoyed the few videos you have done, wonder if you have considered doing some more FS2020 issues. I have had the same issue you mention a minute into the throttle calibration one. If I leave the flight running and open the settings panel in the game for whatever reason, as soon as I resume - I get full flap and full spoilers. I think I heard you say you might do a video on this. Any ideas how to fix this cos I'm right out of anything more I can do to stop this annoying intrusion. Thanks n regards, Pugwash
Thank you thank you thank you - been scratching for ages about this issue
THANK YOU THANK THANK YOU VERY MUCH !!! I just switched from Laptop (still Alienware tho..) to my first high end Gaming Computer which I only got because of MSFS and I was freaking out because I couldnt get Engine 1 working any more. I wish I found your video sooner so thumbs up, subscribed and hopefully it helps (if everyone else did it too) so others can find this video easier. Once again Thank you very much for sharing this with us.
Glad I could help!
OMG, Thank you so very much! I've been away from MSFS for over 4 months. I got back in a week ago, and this has been driving me bat shite crazy. Subbed! I'm going to check out the rest of your content!
thank you, now i can fly again after a long time. that update 5 was 40gb and had 1000 bugs in it
Just the fix i have been looking for!!
I must have damaged the default profile. How can I restore the default profile? Or, where can I get a listing of the default assignments for the TCA Q ENG 1&2?
What are the 2 buttons directly beneath the engine start/stop switches for? I press them but nothing happens?
Is this quick fix still neccesary or is already fixed? Thank you!
Any luck with the ignition selector? Mine its nit working.
If you start with a copy of the default profile it should work. The crank switch was working on the default profile for me, so I did the rest of the config using that.
Thanks very much. Everything is finally working again. Hopefully longer than until the next update.
Fingers crossed!
Thanks a lot! Do you also have a solve for the engine mode button? (7/8) Cant use it....
Same here
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
Had been looking for hours and you made it! Thnks!
Glad I could help!
Thanks that works for me but, My engine mode selector is not working, how can I fix it?
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
@@UniformAlpha320 I did it but maybe in some update it stopped working, I’m gonna download de FBW version
Thank you brother.. but I’m facing issues with my throttle alignment too. How do v get that fixed!!
Instructions on that came with the TCA throttle. I think there was an insert in the box or it was on their site somewhere. You still need to move them together carefully for them to stay aligned.
Great, thank you. Have the same issue and beyond my Saitek AP Panel doesnt light up or work on the button inputs. It's exhausting...
I’m having issues with Cessna planes. The screens will turn off after 5 min of flying. Any ideas?
Try removing the throttle quadrant and then flying (use keyboard for throttle). That way you can check if it is do do with your attached device that is turning the aircraft or some other issue. I never had such an issue.
There's another problem and it's been almost abt an year, whenever I pause and unpause the sim the flaps and speed brakes automatically turn on.
As for mine the engine on the controllers does respond but at the same time it doesn’t turn on like it does respond but it doesn’t turn on but when I want to turn it on from the keyboard by pressing Ctrl E then it will work
thank you for the fix👍
Omg thank you soooooo much
Thank you this was helpfull .
THX u very much dude!
Thanks a million 👍👍
my crank mode norm mode ign start switch is not working either any clues how to fix ?
If you start with a copy of the default profile it should work. The crank switch was working on the default profile for me, so I did the rest of the config using that.
@@UniformAlpha320 its sorted thank you
Thank you so much for this tip!
Thank you very much
Please do the flaps and speedbrake video🙏
Thanks a million
Thanks!
Thank you.
Thank u sir!
Cheers mate!
What about ign switch?
If you start from the beginning using a fresh copy of the default A320 throttle profile, the engine starter switch should work. Don't use any of your previous profiles.
@@UniformAlpha320 I don't
Still doesn't always work
Thanks very much.
thank you so much
You're welcome!
Thank you very much