CRJ 550/700 Airbus Throttle Configuration (Thrustmaster)

If you are struggling with the configuration of the Thrustmaster Airbus Throttle quadrant configuration with the new CRJ 550/700 addon, here is a tutorial to help you configure it.
#Aerosoft #CRJ #550 #700
Thrustmaster airbus throttle setup

[@jfavignano]

THANK YOU, this should have been in the manual!

[@jettjones461]

sheeeshh Jeff?!

[@uninvited8231]

you legend i spent hours going across every possible solution until someone posted this vid on the forum. Saved me $75

[@n4qb]

Not only is this helpful but I ordered this throttle because I knew I could set it up for the CRJ with your instructions. Got it today and it works great! Thank you!

[@UniformAlpha320]

Glad it helped

[@oisinkenny1]

IT WORKS! The trick here was setting the "idle reverse thrust" to 1000 and not the default 2000. I read heaps online, no where else did I find this. Works now, thank you. very much

[@GolferChris68]

THANK YOU! This was driving me crazy. Great tutorial.

[@Hitman7119]

This was a big help. Had to do the setup in the sim option 2x but it worked.

[@museeboy1895]

thanks to you man, everything works, i HIGHLY appreciate it

[@lucasconkling6960]

you have saved me from so much frustration, thank you so much

[@jamesfredrick8202]

Thanks, I was baffled, massive help!!

[@sunrisecommunications5314]

You are the FLIPPING BEST BRO!!!! It worked like a charm!!!

[@allugg7243]

Thank you! That was very helpful again!

[@daynas7438]

Thank you for doing this. Great job.

[@hannoveraviation]

This really helped a lot! Thanks!

[@yams900]

Good work mate ! Lost my config are restored as per your instructions :) Just need to sort out the reverse thrust now

[@7200phil]

Champion! This is so helpful, thanks ;)

[@jakobhermann6475]

Amazing ! Thank u so much. It works for me :)

[@Gatorflyer]

Outstanding help!!

[@sappertappergolf]

great video thx, you saved me a lot of time and headache .

[@vincehub_]

Thanks. Love you mate 👍

[@kantalarski]

Excellent advice. Thanks.

[@fly_penpen]

It worked fine
Thanks !

[@RahulSharmaOfficial]

Very important tutorial in very easy way bro. Thank you very much. Just subscribed... All The Best 😀😀👍

[@Musgrave66]

Thank you, that works fine for me. Espacially to reset the sensibillity.

[@Ramses94420]

just two words. "THANK YOU"

[@jcanavesm]

Excelent Tutorial THANKS A LOT!!!!!

[@jclarke1370]

THANK YOU SO MUCH!!! 🙌🏼

[@lorenzopomini]

Thank you very much!

[@mattiha9670]

Thanks a lot!!

[@Fazersofti]

Amazing bro thanks !

[@TheIceJester]

I really think about buying that combo Thrustmaster Airbus soon . Look very nice

[@UniformAlpha320]

It sure is. Gives you the real Airbus feel for sure and works well with other airplanes too.

[@pilotman322]

Thank you so much!

[@GG_Booboo]

Thank you so much! This throttle works perfectly on the Fly-by-wire A320NX but not on the official Asobo version that comes with MFS! They must be a bug on their plane!

[@HousenationBelgium]

Thank you! ;-)

[@jackreddy1568]

Thank you!!

[@daltonwindle4352]

THANK YOU SO MUCH!!! You made my day, I thought I busted $50.

[@alex_spotter7317]

Thank you so much:)

[@jesus_77798]

Thanks. Gracias

[@therealg9391]

Thanks bro

[@pablo9364]

Thanks 🙏. Perfect 🤩 next task (for me not you )engine switches hopefully that’s simple.

[@pastyccino]

Thanks

[@ladinis]

Tks

[@jpallotta4]

ERROR: Engine #1: REV MAX overlaps IDLE.... any suggestions?

[@serhatbabac4039]

Note to the guys who found this one not working, please make sure to click "reverse axis" in the options. it's weird, it shouldn't be like this but this is how I solved.

[@garethtaggart6137]

I have fsx steam adition, any sugestions regarding setting this up, no buttons work and the throtle wont work properley, any help would be appriciated.

[@babs0195]

Can u please do it for the cj4,, its driving me nuts

[@rpmi-1640]

Thank you for your helpful video! I noticed that when you put the physical throttle all the way back in reverse, the one in the simulator actually stays in the idle position with the thrust reversers in the up position. You can also see this in your video. Is this an expected behavior?

[@UniformAlpha320]

Yes that is how it actually works

[@pisso500]

For me it worked all phases but the reverse not.

[@dj-albi1381]

I got. with the sidestick to Problems Anyone can send me ther sensitivity ?

[@anbrod1]

Very good,Thankyou! Ialso had big issues getting it to work, saw a similar vidoe yesterday that help me out. I still cant get the flaps/speedbrakes to work via my Thrustmaster airbus package on the CRJ, have you manage to work that out yet??? I am wondering if the next updates from Areosoft/Asobo studie will help out some ???

[@UniformAlpha320]

Working for me. What key assignments do you use for flaps and speed brakes right now on the TCA package?

[@anbrod1]

@@UniformAlpha320 Thank you for answering me, it seems like most of the function on the TCA Q-Eng, do not communicate very well with the CRJ. When i look at photo on the controls page for the TCA Q-Eng 1&2 it is only the throttle hardware that is pictured, the flaps -landing gear- speed brakes -parking brakes are not there. Do you have the full set ?

[@UniformAlpha320]

@@anbrod1 if you have just the TCA side stick and throttle quadrant (like me) and not the air brake and flaps module , then your flaps and speed brake will be mapped to the side stick not the throttle quadrant. I use the side stick buttons for flaps and the hat switch for trimming. I also use the throttle lever on the side stick for air brakes. That works nicely as a speed brake lever.

[@anbrod1]

@@UniformAlpha320 But i do have the full hardware set, wondering if it is a update from FS2020/Aerosoft that is missing?? after all it is very new in the sim, hoping a next update may solve the issue.

[@UniformAlpha320]

@@anbrod1 Could be... the speed brake and flaps modules are not yet available where I am... so not sure...

[@nikolatr71]

Hello, Rather helpful video reset sensitivity. But then when I put reverse axes on both am getting values inverted so that from idle to Max P all are negative and then reverse is + thatwhy making everyone overlaps. Should this be set w/out reverse axes, I read smwh. that is related to something r/t polarity not really our axes ..?

[@maxpayne3882]

I have the same problem.

[@maxpayne3882]

What is the right set up? I

[@davidduff8001]

same here

[@Linusus]

The reverse thrust doesnt work here :/ i did everything exactly the same

[@jacksonmoseley5309]

My TCA throttle quadrant is responding backwards. When I go to full power to set the detent it acts as if it is set in reverse thrust and when in reverse thrust it is acting as if it were in full power. Do you know how to fix this issue if so I would greatly appreciate it

[@davidduff8001]

same, hope to see an answer from anyone. My full power shows negative numbers and reverse thrust in positive numbers. If I select reverse axis it works on power but no reverse. I need to work out why my TCA throttle is ending negative number.

[@n70amu]

I’m getting negative value for climb, toga, max power . I have done exactly same step as you . What is missing

[@UniformAlpha320]

Try starting over again by making a fresh copy of the default A320 throttle profile

[@ShawnsAviationAndSpottingEWR]

i am so confused i did not get any help from this

[@DerekMoore82]

Is this just for this mod, or do all of the default content airplanes require special adjustments for them to work properly with the Thrustmaster Airbus throttle quadrant? (I'm ordering one from Amazon).

[@UniformAlpha320]

You need to adjust it for almost every type of airplane. But you can make profiles and switch easily.

[@DerekMoore82]

@@UniformAlpha320 Alright, thanks.

[@anbrod1]

How about the flaps, have you got them working?

[@UniformAlpha320]

Don't have that addon yet, not available here

[@Exsing]

Just found this! Awesome!!! Thank you! Can you do a video on Flybywire’s new Development version’s iPad throttle configuration tool? I keep getting an overlap error and can’t configure the TCA Airbus quadrant...

[@UniformAlpha320]

Okay, let me work on that.

[@Exsing]

@@UniformAlpha320 Thank you!!! :)

[@lenwilliams2333]

Thanks for this helpful video….but after following this exactly I find my throttles work in exactly the opposite way !! When I advance the throttle to full power it engages reverse and as for the calibration on the crj pad…just get loads of overlap error messages…very frustrating hobby this 😩😩

[@petermol112]

same problem here

[@serhatbabac4039]

Note to the guys who found this one not working, please make sure to click "reverse axis" in the options. it's weird, it shouldn't be like this but this is how I solved.

[@serhatbabac4039]

@@petermol112 Note to the guys who found this one not working, please make sure to click "reverse axis" in the options. it's weird, it shouldn't be like this but this is how I solved.

[@maxpayne3882]

I get an error Information. Its - 16000 on Max Power and 16000 in reversers position

[@serhatbabac4039]

Note to the guys who found this one not working, please make sure to click "reverse axis" in the options. it's weird, it shouldn't be like this but this is how I solved.

[@noah_dpk]

Only issue is my throttle is going 70%, even when it's on full.

[@JWC924]

not working for me.

[@UniformAlpha320]

what exactly is not working? are you getting any response from the CRJ throttle? try following all the steps again.. it's worked for everyone else.. and I have tried the procedure several times while making the video.

[@serhatbabac4039]

Note to the guys who found this one not working, please make sure to click "reverse axis" in the options. it's weird, it shouldn't be like this but this is how I solved.

[@raulpaul2508]

don t working for me

[@nick.flysEmbraers]

didnt work

[@frazixflying]

It doesn’t work bruh

[@mansnotprot1544]

My throttle just always spazzes out no matter how often i update the Firmware or calibrate it.
Dont buy this throttle.
Absolute garbage

[@NuWhite]

Thanks