Best ECU/Tuning Options For Your BMW E36!
HTML-код
- Опубликовано: 8 сен 2024
- Stock DME Tuning Videos: • Tuning
Megasquirt PnP: www.diyautotun...
VEMS ECU (Use this link for $50 off tuning services): shop.vemstunin...?sca_ref=6130904.lfbjprRxcw
This video covers the various tuning options for forced induction, turbocharged, supercharged, and ITB BMW E36! Anywhere from the stock MS41 DME to Advanced Standalone ECUS
I run a wire in speeduino that cost me about $120USD total excluding the wideband sensor and controller, also uses TunerStudio so has auto tune. It's a great learning experience since it's all open source.
I heard about those but wasn't brave enough to try it. Do you have a link of a step-by-step guide on how to implement it?
@@CanyonTuned there's an online manual that you can google, also some videos on youtube. I can't link anything here because youtube will remove my comment. Speeduino is basically just the firmware, there are a few official boards and lots of user designed boards including a plug and play E36 board. Each board would have different instructions but they all use the same speeduino firmware. I would recommend starting with a board called "UA4C", then wire it in like you would any other stand alone. I just cut the stock ECU connector off the stock harness. Lots and lots of info on the forum and facebook groups.
What about a 92 OBD1 M50B25NV with a Bosch ECU. Stock dme is a no-go, there doesn't seem to be a plug & play solution either. There's only PnP solutions for the m50tub25 (vanos).
I think there's a pnp version of megasquirt, at least there used to be. Otherwise you'll have to get a jumper harness
I have a 92 OBD1 m50B25NV (with actually an s52 bottom end) and it looks like there is a VEMS plug and play as well as an ECU MASTER option that looks interesting to me
thanks for making this.
Hey! Love the video and the link ecu videos! I’ve got a z3 with the m52tu motor and ms42 ecu. I’m planning out a turbo build and am looking for a good option for ECU. I’ve found I can get a patch harness by pnpecu to adapt to the link G4X XtremeX. What are my other options besides stock? Thank you!
Tu engines are honestly uncharted territory. I really don't know much about them or what ecus even support them. Not many people turbo them for a lot of reasons. Personally I'd leave it stock, not a great engine platform to be messing with
I believe ms41.3 can have automatic injection based on closed loop wideband sensor with your pre set AFR's
Hmm well if there was better documentation out there I'd be on board. But trying to get those devs to do anything the past few years has been awful. They want $300 for the custom code with 0 documentation. No thanks
The custom code is free bro and the developer is dead. RIP Abhishek Shinde
Ok after looking into this I still don't see where you get the ms41.3 definitions. And under speed density it says "Speed Density has been loosely tested to not function properly so it is not considered a usable feature." So I don't trust it
If your car (E36 S52) is not boosted, NA with mods, larger MAF, M50 intake, full length headers, no cats, are you still suggesting not to stick with the stock ECU. Or does that comment only apply to boosted applications. At some point I want to switch to more aggressive cams and higher flow injectors.
Ive got ms41.3 on my boosted m50 and would definitely recommend it over ms41.0. Its still a budget option at the end of the day but it makes things a lot easier when it comes to getting the car setup and driving for road tuning ect. It would be pretty cool if they got speed density working but even then, target afrs and extended tables make it worth it imo. Ign cut limiter, boost control and flex fuel are pretty sweet too. There is pretty good support for it in the bmw tuning discord, people have made some good base maps for different m/s5x variants which also makes things a bit easier. Its free and easy to flash so would recommend trying it if you have a stock ecu
Do you have an opinion on the ECUMASTER plug and play adapters connecting to their Black or Classic standalone ECUs?
I can definitely tune it if you decide to go that route
Where are you located? I have 99m3 bone stock that i purchased a month ago. Currently flushing all fluids and looking doing preventative maintenace. 105k runs strong. Would like to add little HP without negativly effecting other components like a tune without the proper undates. Suggestion for novice or leave it alone until educated myself? Im in NJ if ya around this way lol
I can either do a remote tune or you can send me the ecu, hit me up on Instagram (same username)
Hoping you respond since I don’t do instagram, but interested in your remote tuning services. How many revision and what do you charge? Mostly stock MS42
I don't tune m42s
Subscribed
Thank you!
What do you think about boosted N52B30 ?
They're getting more popular, not the best engine to boost but they're getting better (350-400hp)
I'm pretty sure the rods and pistons are really weak in those, and the compression would probably be too high
@@CanyonTuned Max HP recorded on stock block was in the 600s but the engine blew on the dyno.
I've even seen people say that a turbo N52 (small boost) is more reliable than a N54. Who knows
Do you have any experience with the new MS3Pro PnPs for OBD2 e36's? I'm leaning that way over Vems since I hear that Vems hardware is on the older side.
I have experience with both, I would say the hardware/software on the MS3Pro is newer and frequently updated. While the VEMS hardware works great (although getting flex fuel to work is a little bit of a hack). Don't expect VEMS to update anything in the future. It's kind of a dead development project at this point.
Hey bud I was trying to figure out how to message you. But I couldn't so I'll ask you in the comments. I have an E36 M3 it's the S52. I wanted to know if you can tune these cars without having any forced induction. I have a 3.5 intake and I'm not sure if I can put a 3.5 MAF as well and if I do put a 3.5 maf should the car be tuned after?
Yes, you can tune non FI e36's on stock DME and it should work great. If you're going to get a 3.5 MAF you'll want a 3.5 intake, injectors, and optionally bigger cams. And yes, you'll need a tune as well.
The stock DME is still great for NA applications! I thought I had mentioned that in the video
@FourCuteCats I have a 3.5 intake on it now. Next step is the 3.5 MAF. You don't think I can get away with stock injectors? Or are you saying it's only worth doing all that if you get injectors and cams? Also I'd like to try and tune the car myself. I just don't know where to start. If you wanted to share ypur knowledge it would be greatly appreciated 🙂. At least how to start the process.
@@dbldwn3842 Stock injectors with which engine? The S52 pink top injectors have some headroom for more airflow but not much. You'll need to log injector duty cycle to be 100% sure. Also I have a ton of videos on how to tune the stock DME. ruclips.net/p/PLflcXINTFVbuHbL79RXLP4qBUpB1_fYnV
@canyontuned ok cool. Thank you for the link I will go check it out.