@@1pizzadox632 Днес минах диностенд даже :D Ами да бих казал че е добре . В смисъл , както всички знаят от атмосферен тунинг чудеса немогат да се очакват , но стоковите 2.8ци припадат :D
Hey can you also Show how to Programm pops and bangs out of the exhaust when you let the trothle ? And Are the parameters for hard rev Limiter the Same on 323 ?
Hi, first thing thank you for make this videos, I found your chanel yesterday, and I learnt a lot of things in a few videos that I saw, And Here is my first question: In the last run that you did, you had some "bad spots" if you increase a litle the fuel, you could avoid to decrease the ignition?
Thanks Victor ! As I said in the video , we have plenty of fuel , there is no point adding fuel in already rich condition . Overly rich mixture is going to decrease power
Great video! One question, for MS42 i have Euro 2 and Euro 3 maps. Euro 2 maps have more fueling, but less ignition advance, up to 10ºless in mid range. Should I use Euro 2 maps and do the ignition tuning like you? Why the Euro 2 stock maps have up to 10º less of advance than the Euro 3? Greetings.
I organized an engine. Pistons 80mm but crankshaft and arms 2.8. Ecu ms41. Intake manifold m50b25. Injectors pink color 2.8. Suction cam m54b30. Flowmeter 2.8. Gasoline pressure regulator 3.5 bar. Cold weather kit. Headers. Double inlet double outlet exhaust. Well should I do chip tuning. Would it help. Do I really have extra power
You'll need to get the exact same map but from a manual version of your car from someone or maybe you can find one on the internet. And you'll also need to do ews off
Do you know if the ms41 ECU will work correctly(in regards to timing and other options ) if the engine has a LPG conversion done to it which adds a separate ECU for fueling the gas(sort of like a piggy back system)? Or will the stock ECU go haywire?
@@lobob420 I've already registered my account there but nothing works without confirmation. I've been waiting for the confirmation email since last week but - nothing! I even emailed the admin but did not get any answer back... Is there any chance I can get confirmation and be able to download the files for my ms41?
CRANK In trying to decide if I want to change to ms41 or stick with old Bosch 413 , I have already modded the 413 with a Miller warchip (mappable) but can’t use it in alphaN mode and I’m hoping to use s50 itbs and alphaN would be great with that set up as the engine is already modded too! M50 (b28 stroker ) cams ported head and euro s50 exhaust manifold !
@@billytremoloband7456 MS41 is much better choice. S50 ITBs sux for M50 M52 engines. If you going to go with ITBs you going to need some aftermarket ones.
CRANK must defo try track down ms41 and loom! I wouldn’t mind I probably dumped a few of them before as that time no one locally could map them but as of last week if started working in a tuning shop that do a shit load of BMWs!
Какъв е смисъла от чуждестранна аудитория като нищо не ти се разбира от измисления английски който говориш ? Дори и да може да научи нещо човек клиповете са трудни за сшушане
Никой не карам на сила да ми гледа видеата, има достатъчно информация. Като не ти харесва даваш back и не гледаш. Пък ако съдя по коментарите, все се намира един двама дет ми разбират :)
@@crank3646 youtube ми го предложи иначе нито те следвам ,нито ги гледам,и помисли малко за курс по английски малко да вдигнеш левъла,говориш като пакистанец
If you use e85 fuel You can tune lower load ignition timing to get better fuel economy
wow didnt know it was that simple, ive had 2 bmws tuned at the rolling road with standard ecus, and this must be what they did... thanks!
Yes it is not so hard , but is time consuming , if you want to do it more precisely
iwas told that the ecu for the bmw m44b19 could run any 4 cylinder engine, and it was extreamely powerful. thanks for the vids
Thanks sir RUclips training course
А бъркаш, бъркаш и това е интересно, и то много! 👍👍👍
А супер , щом поне на един човек му е харесало :D
@@crank3646 Усеща ли се на този етап колата по експлозивна, без да са барани ваносите?
@@1pizzadox632 Днес минах диностенд даже :D Ами да бих казал че е добре . В смисъл , както всички знаят от атмосферен тунинг чудеса немогат да се очакват , но стоковите 2.8ци припадат :D
@@crank3646 А браво това да се чува!
Hey can you also Show how to Programm pops and bangs out of the exhaust when you let the trothle ? And Are the parameters for hard rev Limiter the Same on 323 ?
Master of the e36’s…😃
Did you see any difference on your car’s performance??
Hi, first thing thank you for make this videos, I found your chanel yesterday, and I learnt a lot of things in a few videos that I saw, And Here is my first question: In the last run that you did, you had some "bad spots" if you increase a litle the fuel, you could avoid to decrease the ignition?
Thanks Victor !
As I said in the video , we have plenty of fuel , there is no point adding fuel in already rich condition . Overly rich mixture is going to decrease power
Very interesting video! Thank you for sharing the information
Nice progress guys. Curious how the car will drive and behave. Stay safe, Dutch regards, Nico
Thanks Nico ! Nothing crazy in driveability behavior actually . Just a little bit less torque in the low to mid range rpms .
thankyou sir but have you got Damos file for bmw plz
Great video! One question, for MS42 i have Euro 2 and Euro 3 maps. Euro 2 maps have more fueling, but less ignition advance, up to 10ºless in mid range. Should I use Euro 2 maps and do the ignition tuning like you? Why the Euro 2 stock maps have up to 10º less of advance than the Euro 3? Greetings.
But ignition step size is 0.375 = 0.75/2
why did you add/reduce 1.0 degree?
its more accurate to add/reduce by 0.75 or 0.375
Hello. What is the max ignition timing on m52b28 that you can work without problems??
Hola tendras este video traducido al español? tengo un 328i T/M , crees que este mapa me funsione?
I organized an engine. Pistons 80mm but crankshaft and arms 2.8. Ecu ms41. Intake manifold m50b25. Injectors pink color 2.8. Suction cam m54b30. Flowmeter 2.8. Gasoline pressure regulator 3.5 bar. Cold weather kit. Headers. Double inlet double outlet exhaust. Well should I do chip tuning. Would it help. Do I really have extra power
Yes a tune will be a good idea , with all this changes
please please make a video about hardcut revlimiter like (M50)
Thaaank you 😬
Will do , after the E36 dyno measurement video :)
This is the easiest part of "tunning" ms41 :D Just change Hysteresis A to 0 and B to 32 :) for the best resoults !
Dosiaczek thank you 😎
@@DominikPaczkowski2015 i cant find a definition file for ms41 can you provide a link please
Hi Crank! Did you change "Engine Speed Limiter (Inmediate)? Thank you!
How would you flash an ecu from an automatic to manual after doing a manual swap?
You'll need to get the exact same map but from a manual version of your car from someone or maybe you can find one on the internet. And you'll also need to do ews off
Been searching for the XML ms41 ecu definitons for ages! Any chance you can upload yours?
Sure, 150usd
What software you use to tune the map?
Do you know if the ms41 ECU will work correctly(in regards to timing and other options ) if the engine has a LPG conversion done to it which adds a separate ECU for fueling the gas(sort of like a piggy back system)? Or will the stock ECU go haywire?
Just log it while on LPG.
Can (Quickflash MS41) tune the MS40?
Is the kkl cable from link you left gonna work on Bmw ?
Can you sent the link of your hex file
Why you dont touch WOT enrichment?
Because this M52 are running rich as hell stock
@@crank3646 this is true lol
Hey, does it gain noticeable power or is it just finetuning?
Nothing crazy, or at least noticeable
Hello . I have a problem with rom raider when i open the program it says ecu definitions not found, how can i solve this problem?
Thnx
you gotta go to the romraiders forums and under bmw they have everything you need in there, have to register to download them
@@lobob420 I've already registered my account there but nothing works without confirmation. I've been waiting for the confirmation email since last week but - nothing! I even emailed the admin but did not get any answer back... Is there any chance I can get confirmation and be able to download the files for my ms41?
New sub here , is it possible to map the car in alpha N mode with seimens ecu?
Yes it is possible
CRANK In trying to decide if I want to change to ms41 or stick with old Bosch 413 , I have already modded the 413 with a Miller warchip (mappable) but can’t use it in alphaN mode and I’m hoping to use s50 itbs and alphaN would be great with that set up as the engine is already modded too! M50 (b28 stroker ) cams ported head and euro s50 exhaust manifold !
@@billytremoloband7456 MS41 is much better choice. S50 ITBs sux for M50 M52 engines. If you going to go with ITBs you going to need some aftermarket ones.
CRANK there is adapter plates widely available now!
CRANK must defo try track down ms41 and loom! I wouldn’t mind I probably dumped a few of them before as that time no one locally could map them but as of last week if started working in a tuning shop that do a shit load of BMWs!
Bro help me how conected you have instagram.? I have E36 318 Cabrio swap m52b28. I have problem evs 2 vs evs 3 plz info me bro
I have a video about this, just type "BMW EWS 2 to EWS 3 Installation" in my channel and you will see it
You have instagram?
@@crank3646 i have e39 complet, maibe posibile conected ews 2 for ews 3 m52b28
Сними эти же видео на русском
Какъв е смисъла от чуждестранна аудитория като нищо не ти се разбира от измисления английски който говориш ? Дори и да може да научи нещо човек клиповете са трудни за сшушане
Никой не карам на сила да ми гледа видеата, има достатъчно информация. Като не ти харесва даваш back и не гледаш. Пък ако съдя по коментарите, все се намира един двама дет ми разбират :)
@@crank3646 youtube ми го предложи иначе нито те следвам ,нито ги гледам,и помисли малко за курс по английски малко да вдигнеш левъла,говориш като пакистанец
@@crank3646 honestlly they are very understatable
@@crank3646 I can understand everything great video
why is there ignition base and ignition base 2 for what is the second map?
How do you scale the load axis to extend max load to 1024?