It's so nice ... that at the end of your clip something is attached that may have gone wrong, although what went wrong is what, in my opinion, is going really, really well. What makes your clips so warm. Really good. And the clips are really nice - don't misunderstand!
A cart like that is one of my biggest needs right now, as soon as my shop is all closed in and insulated I will have to figure out a design for a wood cart, thanks for the inspiration. Also, I love the wood cart pit-stop! almost F1 speed!
Nice man, no nonsense. I like how you cut all the plywood freehand with a circular saw. Sometimes I think all the typical woodworkers are doing things totally overkill when it comes to plywood, what with thousand dollar track saws and several thousand dollar table saws, roller guides, fence upgrades, etc etc
Great filming of that clever project, Ben. I really enjoy your RUclips videos and commentaries. Maybe it's time now to build a generous-sized workbench to save you crawling around on the floor?
Your dogs do what my wife and kids do - not quite fetch and beg for tummy rubs, but similar interruptions and distractions. This video is proof that you don't *need* a workbench or a bunch of tools and that you can make and fix mistakes easily with a little patience.
Love the cart. I'm going to be building one for my garage in the next month so perfect time on the video. You need a miter saw stand my knees were hurting watching you cutting wood on the ground.
Thanks for the video! One tip, I noticed you’re splitting a lot of your edges. I’m sure you know this already but seriously consider pre-drilling your holes to avoid splitting and prematurely weakening your structures. I know it takes a little longer but it’s seriously worth the effort to get the best, long lasting results out of these great builds! Good luck. 🍀
Thanks for the videos, very relaxing - informative, they are a great escape from virus and election coverage. Love your dogs. Reminds me of my cat, the minute I sit down at the computer she lays on the keyboard, sit down in the recliner with a snack, and she is right on your lap. Apart from your other work, you are a skilled carpenter.
I made a similar measuring mistake. I was supposed to make a doorway on a storage barn 5 ft 6 in. I incorrectly made it 56 inches. I chose to leave it, and fix it later on, if I needed to. That was over 10 years ago and I haven't changed it yet. Sometimes a mistake doesn't really need to be fixed.
love your work, I am going to steel a load of these ideas for my workshop, i esp love your use of french cleats. i have some work to do in the workshop ;-) subbed too ;-)
I think you need a better table saw I had that same one you do and upgraded to a delta and I love it you should consider upgrading it would be alot easier to make smaller cuts and would be more accurate
Great job. Try getting work done with a Border Collie... I found tossing the ball in fenced part of my yard is most efficient. Then he has to run all the way around house to get ball and back. Few extra minutes... LOL
Imagine all the work you could do if you weren't so easily distracted by your dogs!😂 Time to build yourself a proper workbench to get your stuff off the floor, Ben!
Great job! I love this and will be employing your ideas soon as I have a similar problem. Also, the reason your dog will not drop the ball is that it is a bit too big for his mouth and it is hard to open that wide. :)
You need to have a tv show on the DIY network. You have everything: you’re very talented, smart, camera friendly, and most important extremely hot and handsome. 😜
2 comments - build a rolling workbench next and get off the ground. And more importantly, upgrade your miter saw to one that has a blade guard. That thing is dangerous, especially with your really cute dogs running around
life is sooo much better with dogs! They are really helpful when it comes to wood working projects.
I’m amazed with how patient you are with your dogs. 😁
Another awesome video. Your dogs are one of the best parts!
Love the doggos at the end of every video! They’re a perfect compliment to your quality!
Great video and 2 wonderful helpers.
It’s so cool watching those two pups growing up.
Someone buy this man a track saw guide rail! Great videos!
The last bit with the “boys” was the best!
It's so nice ... that at the end of your clip something is attached that may have gone wrong, although what went wrong is what, in my opinion, is going really, really well. What makes your clips so warm. Really good. And the clips are really nice - don't misunderstand!
This IS the best wood storage cart I have yet seen. Awesome Job!!
Plus, your pups love you so much!! 😊 Love the interaction with them in the end!!❤
Loving the cart. A place for everything and everything in its place.
You think like me Mr Tardif. Putting wheels on things for mobility. Great work 👍
Supervisor dogs are the best dogs!
Your videos are top notch. Two highlights are, sharing your mistakes and corrections, and the puppies!
A cart like that is one of my biggest needs right now, as soon as my shop is all closed in and insulated I will have to figure out a design for a wood cart, thanks for the inspiration.
Also, I love the wood cart pit-stop! almost F1 speed!
Your dogs are so adorable!
Your kids are gonna have a lot of fun
Nice man, no nonsense. I like how you cut all the plywood freehand with a circular saw. Sometimes I think all the typical woodworkers are doing things totally overkill when it comes to plywood, what with thousand dollar track saws and several thousand dollar table saws, roller guides, fence upgrades, etc etc
Very nice job. I came upon your channel because I am needing the same thing. Thanks for the ideas and thanks for sharing.
Clever, patient, skilled man.
Love the out takes with dogs!
Great job 👍🛠️📐🔨
Nice work on the wood storage cart Ben! Thanks for sharing the video with us!💖👌👍😎JP
Nice design. I especially like the drawers/boxes at the bottom for small bits -- I'm going to add some to my storage cart.
Awesome job!! I've been rethinking MY wood storage and this idea will work great!!
name a more iconic duo: Ben Tardif and things in his workshop on wheels
Ben Tardif and his dogs causing bloopers
@@KirbyMobile1 also true
Doofie and Hansel :)
Ben Tardif and things on French cleats
Looks great! I love your bits at the end. The pups are adorable!
longer than needed is always much better than shorter than needed
shorter than needed is every woodworker's nightmare
I loved the end of the video with your "Management Team" wanting to conduct meetings on the status of the project.
This may be the best design I’ve seen. Nice work Ben!
Great project idea and great design!
That is a beast for sure. Nice job!
and this is why you built the work bench in the next video :D Adorable!
Those moments with the dogs are priceless 😂
Cool project and good luck
It’s a wonder u get anything done with ur adorable pooches there, I love the bits at the end with running around and being mischievous xx
Your corgi's heel work is top notch! Love this project share. Subscribed!
Great filming of that clever project, Ben. I really enjoy your RUclips videos and commentaries. Maybe it's time now to build a generous-sized workbench to save you crawling around on the floor?
Bless Doofie’s little ❤️. He loves hims Daddy!
The doggy bloopers at the end were really wholesome, I thoroughly enjoyed that.
Your dogs do what my wife and kids do - not quite fetch and beg for tummy rubs, but similar interruptions and distractions.
This video is proof that you don't *need* a workbench or a bunch of tools and that you can make and fix mistakes easily with a little patience.
Love the cart. I'm going to be building one for my garage in the next month so perfect time on the video. You need a miter saw stand my knees were hurting watching you cutting wood on the ground.
Loving your content this year! Thanks, Ben!
Thanks for the video! One tip, I noticed you’re splitting a lot of your edges. I’m sure you know this already but seriously consider pre-drilling your holes to avoid splitting and prematurely weakening your structures. I know it takes a little longer but it’s seriously worth the effort to get the best, long lasting results out of these great builds! Good luck. 🍀
Your channel is growing rapidly it feels like only yesterday you reached 100k now your at 122k. Wow
Good thing you had the shop assistants T o help out! 😁
Thanks for the videos, very relaxing - informative, they are a great escape from virus and election coverage. Love your dogs. Reminds me of my cat, the minute I sit down at the computer she lays on the keyboard, sit down in the recliner with a snack, and she is right on your lap. Apart from your other work, you are a skilled carpenter.
This is amazingly practical!!! Love it!!
I made a similar measuring mistake. I was supposed to make a doorway on a storage barn 5 ft 6 in. I incorrectly made it 56 inches. I chose to leave it, and fix it later on, if I needed to. That was over 10 years ago and I haven't changed it yet. Sometimes a mistake doesn't really need to be fixed.
Seems like you need some workbenches next to help minimize doggo sabotage :P
But the doggo sabotage is so funny!
Well done. I like that rack!!
Love the new project but when is the workbench coming 😀😀
The dog outtakes seems like my life in my shop. I have a corgi and a Doberman and they insist on taking my scrap cutoffs to play with.
Now you need a burn pile box.
Great Video, keep it Up
Fantastic
Love your videos
love your work, I am going to steel a load of these ideas for my workshop, i esp love your use of french cleats. i have some work to do in the workshop ;-) subbed too ;-)
Nice design.
Watching your "Technical difficulties..." Maybe it's time to build a miter saw table, and matching workbench? ;)
Is a saw table or workbench next on the agenda? 😁 Your pups love you so much! Great vid, as always.
Man, you have the best dogs ! keep up the great videos and please show more dogs ! lol
Building a Wood storage for the wood storage build 😂😂😂😂 great stuff Ben.
Danke👍🏻
OTTIMO E SIMPATICO VIDEO.
SALUTI
SALVIO
I think you need a better table saw I had that same one you do and upgraded to a delta and I love it you should consider upgrading it would be alot easier to make smaller cuts and would be more accurate
Great job. Try getting work done with a Border Collie... I found tossing the ball in fenced part of my yard is most efficient. Then he has to run all the way around house to get ball and back. Few extra minutes... LOL
Where's the next part to the 2 player pinball machine
Nice
Why crawl around on the ground now with pats in the way when you have that great work bench, Ben?
when is the updated shop tour? and the office inside
Another great video Ben! Can’t wait for the next one. When do we get to meet your better half?
Today, I envy your knees, agility, and youth. Tomorrow, though, you'll envy my bench-height cut-off station and table saw.
at least you cut wider/longer then you needed,
Looks more pieces for the cart , that’s after measuring the second time! Where did you lean to do it all ?
Awesome videos sorry I’m sooo late
Imagine all the work you could do if you weren't so easily distracted by your dogs!😂
Time to build yourself a proper workbench to get your stuff off the floor, Ben!
You should build a retractable fence so the dogs won’t bother you when you are working in the workshop! 😂 🎾 🐶
Animals at the end! lolol
I had a bunch of extra wood laying around.
Used it to build a wood storage cart.
Now I have no wood to fill the cart.
Great job! I love this and will be employing your ideas soon as I have a similar problem. Also, the reason your dog will not drop the ball is that it is a bit too big for his mouth and it is hard to open that wide. :)
We came for the wood storage, we stayed for the doggies.
how long did it take you to build this
also it looks great
fantastic video as always. i must ask tho, is there any reason you made one handle horizontal and the other vertical? keep us the good work : )
You need to have a tv show on the DIY network. You have everything: you’re very talented, smart, camera friendly, and most important extremely hot and handsome. 😜
That would just ruin things.. RUclips is perfect.
Reverse cap with added reverse sunglasses reduce hotness by at least 40% sorry.
Join me this week as I build a cart to store all of my scrap wood. Join me next week as I build another cart to store all of my scrap wood.
Step 1: Throw ball.
Step 2: Briefly get work done.
Step 3: GOTO 1
You need to build a basic table (at least) to put the miter saw on so you're not on your knees cutting wood.
thats a lot of work to put into a burn pile cart
You're "" circular sizer looks a lot like a miter saw to me. Lol. Nice cart!
How dare you try to get some work done when it was obviously pup playtime! How cool.
You dont need a tail, you have 2 mobile tails.
may invest in a good pop filter.
This pile of wood is a mess But I Like it will It transform a lot of tools
Will you please make a table for your TABLE SAW, (wink wink), next? I close my eyes every time you use that thing on the floor...
4 months later and still no more 2 player pin ball videos
Gotta pay the dog dues.
Measure twice, cuss once.
2 comments - build a rolling workbench next and get off the ground. And more importantly, upgrade your miter saw to one that has a blade guard. That thing is dangerous, especially with your really cute dogs running around
Seus cachorros são nota 1000, rsrsrsrs
Imagine using the metric units ... Just imagine...
What is the name of the tool company you use?
Ryobi ...
@@sibbe777 tnxx man!!