1. you said so, so it doesn't matter even if you change it 2. it only saves NAND dumps in that folder, no other files - what more clarity you need 3. Its not pointless - you completely missed the part (06:28) where its mentioned why we tried to present as many scenarios we can. Many people having troubles with this step so tried to show it. we can glitch board within 10 minutes. Its a video to show "HOW TO" and cover many scenarios not "look i glitched Corona" 4. ?? no idea
@Bakar Shakeel yes for new DVD Drives (16D5S) thats the whole process to obtain DVDkey. Currently there isn't any other way available, when one is available we will make a video of it.
Thats the recommended settings by TX Slim (Corona) LK1 - Open (Enable Crystal) LK2 - Short (Disable 10 Ohm on CPU_RST) LK3 - Open (C15 Disable) LK4 - Short 1-2 (300pF on CPU_RST to GND) or LK4 - Short 2-3 (100pF on CPU_RST to GND) or LK4 - All Open
Can you make a tut on how to rgh corona v2 with cr3 lite and sd nand r/w and qsb upgraded edition(it has a crystal) i have these but need a tut and cant find one or link me to one
Did you know you ordered 'Xecuter CK3 Mini'. Thats completely different This is "Xecuter CR3 Lite" Big big difference. Xecuter CK3 Mini is standalone power source solution to XBOX360 Drives Xecuter CR3 Lite is a Glitch device.
Hola, gracias por compartir tu conocimiento, tengo una Xbox 360 Slim placa trinity, la compre de segunda mano, ya tenía lt3.0, lamentablemente en dónde vivo no encuentras dvd de doble capa para quemar discos, así que me animé a instalar RGH, al leer la Nand, me daba errores no lo reconocía y salía un anuncio de que sobre los sectores, creo son de 16 regularmente, la mía decía que era de 10....a mucha insistencia leyó la Nand original pero con errores...tampoco quiso flashar el xenon o el xell, porque estaba corrupta la Nand, así que decidí crear otra Nand y instalarla, corrió todo bien hasta que necesite el dvd Key, el número de serie para parchar la Nand....al final decidí proseguir sin introducir el dvd Key y el número de serie, el RGH funciona bien, pero el lector no lee absolutamente nada....nose si podrías orientarme para poder rehabilitar el lector. Gracias de antemano.
1. You don't need to specify the RGH/RGH2 in J-Runner for slims. It's the same thing. 2. File already exists is a warning that nandump1.bin and/or nanddump2.bin already exist. You should be making it clear that it's ok to accept ONLY if you know what the files are. 3. Test #1 is pointless. You need at least 1 and 5 enabled on S2 for the CPU_RST signal to go through. 4. 'chassis' is pronounced 'shassy' ;) 5. You should have built a 16197 image - there's no benefit building a 14719 image.
Ok,, but im still wondering what we gonna do with 16D5S unlocked PCB? how'd I install that in dvd drive. could u pls make one video that tells what to do after this process. and where to download all the software and latest firmware files. Thanks
We started doing contract repairs work hence I had very little time to make videos. Hopefully We'll try to resume our RUclips Channel soon. Thank you for the support :)
is that the whole process to obtain dvd key? means it has nothing to do dvd drive? ...crap !! im confused. man is there any way that you guys can flash my console for me?
I have question on Rgh Xbox 360 (corona), if xecuter cr3 is not working properly, brown(f) and green(e) wire are not connected properly is it possible that Xbox will not put out audio and picture (tv showing: no signal message)? I gave my console for reset glitch hack to some shop and I think they were in hurry and thus messed up with solder joints so is it possible that it's causing no signal message? And if I fix the solder joints will it all be working fine? Have a great day everyone!
Game HackerZ Cool runner has nothing to do with the audio or anything. They probably messed up dome part of the motherboard from being in a hurry, but it has nothing to do with the soldering.
Game HackerZ Just buy a console only on Ebay. You can get them for like $40. I was trying to mod my console and ended up ruining it, so I bid on an item which cost me $20. So, I suggest getting a console only instead of trying to repair it.
![[OLD] How to RGH 1.2 a Xbox 360 (Phat)](http://i.ytimg.com/vi/XA7jkvXe5bg/mqdefault.jpg)
Really great video mate.
The detail in your glitch attempts and info of every attempt was awesome. Really helped connect the dots.
Thanks again
Your RGH videos are the best on the Tube
5. 16197 is released a week ago, video was compiled almost 4 weeks ago.
Thank you
1. you said so, so it doesn't matter even if you change it
2. it only saves NAND dumps in that folder, no other files - what more clarity you need
3. Its not pointless - you completely missed the part (06:28) where its mentioned why we tried to present as many scenarios we can. Many people having troubles with this step so tried to show it. we can glitch board within 10 minutes. Its a video to show "HOW TO" and cover many scenarios not "look i glitched Corona"
4. ?? no idea
@Bakar Shakeel
yes for new DVD Drives (16D5S) thats the whole process to obtain DVDkey.
Currently there isn't any other way available, when one is available we will make a video of it.
@ shogoz123
Thank you for watching and kind remarks. Please support us by 'Liking' our Facebook page.
Thats the recommended settings by TX
Slim (Corona)
LK1 - Open (Enable Crystal)
LK2 - Short (Disable 10 Ohm on CPU_RST)
LK3 - Open (C15 Disable)
LK4 - Short 1-2 (300pF on CPU_RST to GND)
or
LK4 - Short 2-3 (100pF on CPU_RST to GND)
or
LK4 - All Open
you need to visit TX forum for Recommended CR3 Lite Jumper Settings for Corona v2
Can you make a tut on how to rgh corona v2 with cr3 lite and sd nand r/w and qsb upgraded edition(it has a crystal) i have these but need a tut and cant find one or link me to one
Did you know you ordered 'Xecuter CK3 Mini'. Thats completely different
This is "Xecuter CR3 Lite"
Big big difference.
Xecuter CK3 Mini is standalone power source solution to XBOX360 Drives
Xecuter CR3 Lite is a Glitch device.
Great Video. I will definitely subscribe.
Hola, gracias por compartir tu conocimiento, tengo una Xbox 360 Slim placa trinity, la compre de segunda mano, ya tenía lt3.0, lamentablemente en dónde vivo no encuentras dvd de doble capa para quemar discos, así que me animé a instalar RGH, al leer la Nand, me daba errores no lo reconocía y salía un anuncio de que sobre los sectores, creo son de 16 regularmente, la mía decía que era de 10....a mucha insistencia leyó la Nand original pero con errores...tampoco quiso flashar el xenon o el xell, porque estaba corrupta la Nand, así que decidí crear otra Nand y instalarla, corrió todo bien hasta que necesite el dvd Key, el número de serie para parchar la Nand....al final decidí proseguir sin introducir el dvd Key y el número de serie, el RGH funciona bien, pero el lector no lee absolutamente nada....nose si podrías orientarme para poder rehabilitar el lector.
Gracias de antemano.
really good work ... who can restart bios for xbox 360 slim corona 16 as default just like factory
Great video man :)
Nevermind you answered my email :)
1. You don't need to specify the RGH/RGH2 in J-Runner for slims. It's the same thing.
2. File already exists is a warning that nandump1.bin and/or nanddump2.bin already exist. You should be making it clear that it's ok to accept ONLY if you know what the files are.
3. Test #1 is pointless. You need at least 1 and 5 enabled on S2 for the CPU_RST signal to go through.
4. 'chassis' is pronounced 'shassy' ;)
5. You should have built a 16197 image - there's no benefit building a 14719 image.
Great video's
Yes i do.
Ok,, but im still wondering what we gonna do with 16D5S unlocked PCB?
how'd I install that in dvd drive. could u pls make one video that tells what to do after this process. and where to download all the software and latest firmware files.
Thanks
Thank you for watching
Please support us by liking our 'Facebook' page.
Why did you stop posting videos?
We started doing contract repairs work hence I had very little time to make videos.
Hopefully We'll try to resume our RUclips Channel soon.
Thank you for the support :)
is that the whole process to obtain dvd key?
means it has nothing to do dvd drive? ...crap !! im confused. man
is there any way that you guys can flash my console for me?
@TheHacker32
Yes
Hi how long would it take for my item to ship from AUS to Chicago IL? Thanks :) also I did not receive tracking at all
It takes 3-10 days for International Delivery via Australia Post.
What is your order number ? please. I can confirm it for you
does work a normal nand x without this plastic ?
hello mate in 39.06 why do you need Ethernet cable?
mine no longer show network :( it a phat 360
Hello ! What is the alternate cpu -rst point 3 name ?
This will work on my v1 slim with dashboard 2.0.16537.0 correct?
@hassaan1424
Thank you
Please support us by 'Liking' our Facebook page. Thank you
Happy Gaming
Make a modding vid
I have question on Rgh Xbox 360 (corona), if xecuter cr3 is not working properly, brown(f) and green(e) wire are not connected properly is it possible that Xbox will not put out audio and picture (tv showing: no signal message)? I gave my console for reset glitch hack to some shop and I think they were in hurry and thus messed up with solder joints so is it possible that it's causing no signal message? And if I fix the solder joints will it all be working fine? Have a great day everyone!
Game HackerZ Cool runner has nothing to do with the audio or anything. They probably messed up dome part of the motherboard from being in a hurry, but it has nothing to do with the soldering.
Yeah true, I sent it for repair in some other shop and they said now motherboard is of no use.. Thanks for trying to help.
Game HackerZ
Just buy a console only on Ebay. You can get them for like $40. I was trying to mod my console and ended up ruining it, so I bid on an item which cost me $20. So, I suggest getting a console only instead of trying to repair it.
GameConsoleRepairs your cr3 lite v3 is not in stock wtf come now!
can use on corona v3?
does this still work?
Is it works on 16547?
Yes