the kailh housings for the otemu are insanely tight. a decent amount of kailh housings when trying to open them with an opener doesn't work that well, and usually takes a flathead screwdriver to open them.
For the people wondering if the Tealios v2 stem + Cream housing is nice. I tested it with some broken in creams and it is amazing. Really smooth and a really good sound. But you have to break in the creams otherwise they are a little scratchy. Tealios have a weird bottom out feel and they sound pretty bad. This frankenswitch fixed both things. The bottom out is so nice and the sound is great.
love thE video! feker stems will work in a clear Boba top housing fyi, as will most other stems. the opaque bobas have trouble with most stems, and will cause lots of bottom housings to not actuate at all... something to do with the slot for the leaf spring
Sadly not as smooth as a stock tangie. Might be worth doing a TKC bottom switch swap. (Maybe Banana Split or Tangerine bottom) to retain some of that linear smoothness
will we get a full build of the tealios + cream Frankenstein? since you were looking to "daily drive" it in the video, i would love to see how it would sound in a full build!
I do plan to do this, and I wanted a more high quality video for it rather than just a sound test. (The concept I’ll be going for is: “my top 5 franken switches” or something like that). There’ll be tests of it in different boards and/or different plates.
I saw someone ask about using an Outemu bottom with non outemu tops and stems for their outemu hotswap board, two things: (1) they generally will not be physically compatible due to the difference of how the tops and bottoms open, the exception to this are u4 bobas. U4 bobas are already good in their own right though. (2) frankening switches to fit an outemu hotswap is gonna cost more than just getting a normal hotswap board Overall I recommend either: you get a normal hotswap that uses Gateron, kailh, or millmax sockets and/or use u4 bobas or other good outemu pin switches :) (I can’t seem to find the comment anymore, but it was in my notifications) @72_PM 自由
I need a franken switch which can make my spacebar special, I still using a Cherry HB, so it should have top housing Cherry! I'm a newbie so yea, tks for helping!
Quick question! Are the Tealios stems in Cream housings nicer than Creamcicles? because i have seen people say just get tealios and doing this makes it worse so idk. 🤨 Thanks!
Will give it a try brother, but it’s gonna take me a while to give a good video. Off the bat though, I’ve tried it: (all unlubed though) - thoughts - very smooth but sound could definitely be better. Also not sure if I was imagining it but actuation distance seems to be a lot shorter for tangerine stem in tealio housing
@@typewithe5631 and what about alpaca housing, halo stem and zealio contact leaf? Sorry if I'm insistent but I'm very courious about frankenswitches and I can't experiment right now.
@@danielebortoliero5662 I think there might be contact issues, this is because zealpc housings are manufactured by Gateron whilst alpaca housings are manufactured by jwk. I’ll definitely give it a try though. I’ll formally open requests in my next video, but I’ll try to do this already
Not sure 😅 I'm building my first keyboard and ordered a bunch of OAs in. Idk whats good? Maybe try swapping cream stems or ink black stems though I've heard marshmallow switches are good could try those ??
@@Darkshadowminer8 I have ink blacks and creams, but don’t have marshmallows. Also OAs (at least in my opinion) are not worth the money. I highly recommend NK Silk Blacks, personally
@@typewithe5631 Its a shame that you think that, at least from what ive heard/seen the OA's are essentially a JWK recolour. I have little interest in Gat Inks or milkys and never came across any silk blacks. After a quick google theyre about £20 more than what i paid for OA's :( What dont you like about OA's? Are they not on par with V2 Tanges? I'd still love to see/hear an Original Franken Aspiration :D
@@Darkshadowminer8 silk blacks are more expensive than OAs? @.@ maybe they’re just expensive where I’m from, how much did you get them for out of curiosity?
@@typewithe5631 Nice was thinking of doing this actually. Have u had problems with tealios v2 clicking when tapping the keys and did the cream housing fix this? As I think it has to do with the tealios leaf
@@ProdShaku Lubing fixed the problem for me, although I'm not sure if we're talking about the same thing. My problem was purely a sound issue, but if the clicking was causing some sort of interference, then no.
![Kumamoto Masters Japan 2024 | Gregoria Mariska Tunjung (INA) [5] vs. Akane Yamaguchi (JPN) [2] | F](http://i.ytimg.com/vi/EIjZybhsWqA/mqdefault.jpg)
I get the intro....
Bruh
says the guy who made intro Bruh
@@TTEREVE bruuuh
@@typewithe5631 i guess its opposite day
@@elgspirit904 whaddup
I would love to see some vintage black frankenswitches. Thank you for doing this.
I actually have the parts needed for this, unfortunately, I've been very busy. I might be able to do this around December though!
A name for the cream stem in the tangy would be "creamsicle"
nvm just figured out that's its actual name oof
trash at fortnite
the kailh housings for the otemu are insanely tight. a decent amount of kailh housings when trying to open them with an opener doesn't work that well, and usually takes a flathead screwdriver to open them.
Thanks! I’ve learned this recently from other experiments :)
For the people wondering if the Tealios v2 stem + Cream housing is nice. I tested it with some broken in creams and it is amazing. Really smooth and a really good sound. But you have to break in the creams otherwise they are a little scratchy. Tealios have a weird bottom out feel and they sound pretty bad. This frankenswitch fixed both things. The bottom out is so nice and the sound is great.
Right? I’m looking to make a more in depth video on it with a sound test for this. The reverse franken also isn’t bad.
@@typewithe5631 a sound test with a full board would be amazing!
You just described Tangerine V2 as well! Literally any long pole POM stem will get rid of the awful stock bottom-out feel and sound.
love thE video! feker stems will work in a clear Boba top housing fyi, as will most other stems. the opaque bobas have trouble with most stems, and will cause lots of bottom housings to not actuate at all... something to do with the slot for the leaf spring
Thanks! I don’t know why I couldn’t open that particular switch. I figured as much though
Ahhh cream stems in any housing is cool
I think that one of the best combos would be op black stem with durock pom housing
The X and V key sounded the best imo
Kiwis with tangerine stems look really pretty
Sadly not as smooth as a stock tangie. Might be worth doing a TKC bottom switch swap. (Maybe Banana Split or Tangerine bottom) to retain some of that linear smoothness
@@typewithe5631 Try with alpaca bottom housing, its also smooth
@@gvnady8380 that has been my experience putting alpaca bottoms with any good linear. (Under the condition that the bottom and top are compatible)
For that other style switch. You have to press the stem part to take them apart
I learned this recently, thank you!
underrated deserves way more than 253 subs
Please keep making these I love your content and support you any way I’m able
I’ll slowly churn out videos my man, I’m just really busy with work
can you try to do a lavender and marshmallow frankenswitch
Sure!
@@typewithe5631 OMG YAY
I planned on getting the Sakurios/Tealios or NK Cream but I saw this a year ago and bought them both and put them together and never looked back.
How do you type so fact with just two fingers!
Your voice is so soothing
Bruh
😂😭 I mean your not wrong
Bruuuuh
cream stem in ink housing?
Sure! Probably really smooth. I’ll try it next video
Holy panda stem nk cream top housing and alpaca bottom housing
the intro made me laugh lol
Glad to know you liked it!
will we get a full build of the tealios + cream Frankenstein? since you were looking to "daily drive" it in the video, i would love to see how it would sound in a full build!
I do plan to do this, and I wanted a more high quality video for it rather than just a sound test. (The concept I’ll be going for is: “my top 5 franken switches” or something like that). There’ll be tests of it in different boards and/or different plates.
@@typewithe5631 any update on this?
how did he get the switches in a perfect circle
wtf
I saw someone ask about using an Outemu bottom with non outemu tops and stems for their outemu hotswap board, two things:
(1) they generally will not be physically compatible due to the difference of how the tops and bottoms open, the exception to this are u4 bobas. U4 bobas are already good in their own right though.
(2) frankening switches to fit an outemu hotswap is gonna cost more than just getting a normal hotswap board
Overall I recommend either: you get a normal hotswap that uses Gateron, kailh, or millmax sockets and/or use u4 bobas or other good outemu pin switches :)
(I can’t seem to find the comment anymore, but it was in my notifications) @72_PM 自由
Thought I'd ask here since you posted this recently, but have you tried out the "Soju" frankenswitch? (Kiwi bottom, Boba top, Lumia/Halo stem)
@@jayatday9527 I have not yet tried it, sounds like a good tactile experience. I don't have bobas atm, but I'll give it a shot!
This video fire tho?
Breh
I need a franken switch which can make my spacebar special, I still using a Cherry HB, so it should have top housing Cherry!
I'm a newbie so yea, tks for helping!
Try cherry housing of a cherry black with tealio stem, imho it’s pretty good, if not use an alpaca stem
put a cream tactile stem in a wiki
What's a good name for the tealios stem in the cream housing? Cloudyskies? Creamios?
I wanna call them Sea Salt Creams
@@typewithe5631 yeaaah I was gonna suggest calling them Seasalt Icecreams as well
I would love to see c3 tangerine bottom housing and boba u4 top housing and holy panda stem
Me typing with 10 fingers 75 wpm
Typing with 2 fingers:
it do be like that sometimes
haha that intro, im pretty sure the inks should be surrounding a cream.....
Bruh
Jokes aside, it was because the recommendation was insisting on the cream stem being in the gat black ink housing, if you know what I mean ;)
@@typewithe5631 hehe
What would albobas, bobacas, zelibobas or holy zelibobas sound like?
The intro do be backwards tho
What spring weight are you using in the cream housing tealios stem frankenswitch?
the stock spring of creams - 65-70
Will you go further and swap housing part for an experiment?
Would tangerine bot housing + cherry clear top housing or cherry top black housing sound better? For the poppy clacky sound? 🤔
This is a very subjective question, but in my opinion yes. I find the sound of a tangerine top extremely lackluster, but I love how cherry tops sound!
Tangerine bottom Pom Durrock stem cherry hyperglide black/red/brown top= clack
Could you try a tealio stem in a durrock Pom housing?
do you think there would be an episode 3? I could watch a video like this for hours lol
I have a different video coming up for now, but I will resume franken switches soon. The video involves aluminum keycaps :)
@@typewithe5631 awesome :))
Quick question! Are the Tealios stems in Cream housings nicer than Creamcicles? because i have seen people say just get tealios and doing this makes it worse so idk. 🤨 Thanks!
how do you type 120+ wpm with two fingers wowwww thats impressive man. great video!
Idk xd
Jokes aside, I’ve been trying to type with more fingers but it hasn’t been going well
nice intro 😏
Is the tealio stem in cream housing smoother than a tangerine?
Ah yes the iNtrO
Can you please try tangerines and tealios mix, imma bout to make a build. Can you compare them to creamsicles and regular tealios, all lined of course
Will give it a try brother, but it’s gonna take me a while to give a good video. Off the bat though, I’ve tried it: (all unlubed though) - thoughts - very smooth but sound could definitely be better. Also not sure if I was imagining it but actuation distance seems to be a lot shorter for tangerine stem in tealio housing
What about UHMWPE stem in boba housing? Great video btw.
Don’t have uhmwipe stems just yet, I’ll try to get my hands on it! And thank you
@@typewithe5631 and what about alpaca housing, halo stem and zealio contact leaf? Sorry if I'm insistent but I'm very courious about frankenswitches and I can't experiment right now.
@@danielebortoliero5662 I think there might be contact issues, this is because zealpc housings are manufactured by Gateron whilst alpaca housings are manufactured by jwk. I’ll definitely give it a try though. I’ll formally open requests in my next video, but I’ll try to do this already
@@typewithe5631 Thank you!
why did i get the intro?
anyways, i rly love this. subbed!
Ponker bless!
More to come... eventually. Just swamped with work ~w~
Awww thats cute, ur watching stuff about Frankenstein oohhh is that shkawy 🥰
*mmhmm*
Underrated comment xd
the intro was kinda sus tho 🤨
Sub'd, I'm digging this content :)
Thank you :)
@@typewithe5631 No, thank you! I got inspired to try out Pompacas! (Definitely making that name up, but it's creampacas with pom stems)
@@blgswagsurfin I definitely need to get my hands on the Pom linears
Are the Crealios tactile or linear?
Linear :)
Link?
try akko cs rose red stem and spring inside of a gat black, i did this for fun and its kinda smooth
rose red housing with black springs and stems are sort of thocky
WoooOooOow
Not sure where your reddit is but id love to see some OA frankenswitches
I can try to get my hands on some! What frankens do you have in mind
Not sure 😅 I'm building my first keyboard and ordered a bunch of OAs in. Idk whats good? Maybe try swapping cream stems or ink black stems though I've heard marshmallow switches are good could try those ??
@@Darkshadowminer8 I have ink blacks and creams, but don’t have marshmallows. Also OAs (at least in my opinion) are not worth the money. I highly recommend NK Silk Blacks, personally
@@typewithe5631 Its a shame that you think that, at least from what ive heard/seen the OA's are essentially a JWK recolour. I have little interest in Gat Inks or milkys and never came across any silk blacks. After a quick google theyre about £20 more than what i paid for OA's :(
What dont you like about OA's? Are they not on par with V2 Tanges?
I'd still love to see/hear an Original Franken Aspiration :D
@@Darkshadowminer8 silk blacks are more expensive than OAs? @.@ maybe they’re just expensive where I’m from, how much did you get them for out of curiosity?
Great comparisons. Hmm. Are you Filipino or Latino?
I’m Filipino, brother.
@@typewithe5631 I can tell slightly (I'm a speech therapist). Your English is superb, it's just a few sounds where I noticed a slight difference lol.
@@RobotechLdv Thanks! Accents are all good in my book as long as everything is understood :)
@@typewithe5631 I agree!
9:27
I guess I’m dirty minded, but that intro seems kinda…. *heh.*
was the cream housing + tealios v2 stem become smoother than normal tealios v2?
I want to know this information as well.
Yes it was, by quite a bit. Sounded better too.
(Of course sound is subjective, but tealios just feel “empty” to me)
@@typewithe5631 Nice was thinking of doing this actually. Have u had problems with tealios v2 clicking when tapping the keys and did the cream housing fix this? As I think it has to do with the tealios leaf
@@ProdShaku Lubing fixed the problem for me, although I'm not sure if we're talking about the same thing. My problem was purely a sound issue, but if the clicking was causing some sort of interference, then no.
Hello po idol
Gud pm