Just finished the installation with Pro Cable : right connectivity is Red=D+, White=D-, Green=5V, Black/Yellow=GND. I used the other video Panthera pro cable fix to have the Panthera Pin change. Thanks Jasen for the great video !
I have an Atrox with a bad board. Wanted to upgrade to a brooks with your EZ board (I have your TE2+ EZ board in my madcatz) I'm wondering if this Panthera EZ board will work with an XBOX ONE Atrox? The wiring looks the same but I just wanted to see if you knew off the top of your head. Appreciate the work!
my razen panthera board where the wires are soldered, it no longer recognizes the cable there is another jumper on the board that you can use to recognize the control
Jasen, is it possible for you to figure out which pins in the original wiring go to the L3 R3 ps4 and touchpad buttons? I want to replace my pcb but im not sure where everything would go
If you install the EZ MOD and install the wires to match my PRO CABLE, yes you can. Unfortunately, I don't have the pinout of the Razer connector readily available to show how to do it .
In windows all 4 lights stay on because that's how it works as an XONE controller. Take a look at 44:58 you see mine does the same. Also, the Panthera logo is steady on.
Jasen Hicks thanks. I realized late that the lights change depending on which game system mode I was in...lol. I could swear the razer logo was fading in and out before I mod it though. I tried to get the pro cable working to no avail...ended up using the stock razer usb cable which is good as well. Anyway no big deal. Thanks for putting up the video.😁
The Blind Dragon - I may have pulsed with the stock board, but there are no electronics to do that in the ez mod. I’m going to have to do a video on how to fix the pinout to use it with my procables because the support out there for the cables stinks.
Plz dude tell how fast is brook pcb with EZ mod? is there no delay for this external adaptation? could yo do a brook input lag test with and witout Ez mod? is verry important to me, if i'm able or not to buy a EZ mod package with Brook on my Panthera
Just finished the installation with Pro Cable : right connectivity is Red=D+, White=D-, Green=5V, Black/Yellow=GND. I used the other video Panthera pro cable fix to have the Panthera Pin change.
Thanks Jasen for the great video !
noureddine daira Thanks for this. Couldn’t figure out why it wasn’t working for me.
Is this the pin arrangement for the pro cable, or how its wired to begin with? What wiring should i use if i plan on keeping the original cable?
Same thing here
Using a Pro Cable, I had to screw red to D+ and green to +5V
i realize I am kinda randomly asking but do anyone know a good place to stream newly released movies online?
@Kylo Stefan flixportal :)
I have an Atrox with a bad board. Wanted to upgrade to a brooks with your EZ board (I have your TE2+ EZ board in my madcatz) I'm wondering if this Panthera EZ board will work with an XBOX ONE Atrox? The wiring looks the same but I just wanted to see if you knew off the top of your head. Appreciate the work!
Thanks for uploading this video. I've been thinking of getting the ezmod kit for my panthera since i wanna use it on pc.
my razen panthera board where the wires are soldered, it no longer recognizes the cable there is another jumper on the board that you can use to recognize the control
Hello. I would like to know if this brook works on Razer atrox 360.
Is it compatible with the Razer Atrox for Xbox One?
Wiring appears to be the same but I'm not sure. I'm currently wondering the same thing. I'll ask too!
Jasen, is it possible for you to figure out which pins in the original wiring go to the L3 R3 ps4 and touchpad buttons? I want to replace my pcb but im not sure where everything would go
is it possible to use your pro cable upgrade kit for this instead on the razer?
If you install the EZ MOD and install the wires to match my PRO CABLE, yes you can. Unfortunately, I don't have the pinout of the Razer connector readily available to show how to do it .
Ok, just installed it. Are all the lights for player 1-4 suppose to remain steady red and panthera logo steady blue?
In windows all 4 lights stay on because that's how it works as an XONE controller. Take a look at 44:58 you see mine does the same. Also, the Panthera logo is steady on.
Jasen Hicks thanks. I realized late that the lights change depending on which game system mode I was in...lol. I could swear the razer logo was fading in and out before I mod it though. I tried to get the pro cable working to no avail...ended up using the stock razer usb cable which is good as well. Anyway no big deal. Thanks for putting up the video.😁
The Blind Dragon - I may have pulsed with the stock board, but there are no electronics to do that in the ez mod. I’m going to have to do a video on how to fix the pinout to use it with my procables because the support out there for the cables stinks.
Does this work for ps5?
Could you use the type b on the ufb instead of the original connector to hook up a cable?
Sure.
@@JasenHicksFGC thanks for the response!
Is it possible to add onto the razer panthera evo ?
No, they are different sticks.
Plz dude tell how fast is brook pcb with EZ mod? is there no delay for this external adaptation? could yo do a brook input lag test with and witout Ez mod? is verry important to me, if i'm able or not to buy a EZ mod package with Brook on my Panthera
Juglar Loco I’m not doing any lag tests with the EZ MOD. There is no processing of signals with it so there is no overhead when using it.
@@JasenHicksFGC Thanks for the answer!