I've repaired a lot of appliances and electronics. This is by FAR the best, most technically descriptive video posted on any device. This is beyond trouble shooting, It describes the function of each component and shows how to test it. Nothing is left out!!
I've collected several non-working Keurig's from garage sales and with the help of your video, I now have a perfectly good functioning machine...all-toll...about $5 bucks and plenty of spare parts...More often than not, I get them free. Thanks, makes for a good rainy day project! I also enjoy working on old vacuum-tube-type radio's...
Nice work, and extremely thorough walk-through of the Keurig. It's refreshing to find someone on RUclips who actually knows what they're talking about for a change. I really appreciated your effort and the time you put into making this video. Having done things like this for a living (degree in Electronics Engineering), I can relate and thoroughly enjoyed it. Thanks again!!!
I know Im randomly asking but does any of you know of a way to get back into an Instagram account? I stupidly lost the account password. I would appreciate any tips you can offer me.
@Dwayne Mateo Thanks for your reply. I found the site thru google and I'm trying it out atm. Looks like it's gonna take a while so I will get back to you later with my results.
I too really liked the extra details you provided (e.g. the three different level probes in the heater tank). I fully agree with other viewer's comments: "refreshing to find someone on RUclips who actually knows what they are talking about"! I also appreciate the way this training was delivered, e.g. great lighting, camera angles, clear audio, good speaking pace, clearly pointing out the subject of each set of comments, etc. The bottom line... quality of this training is really just off-the-charts and pure goodness!
Glad you enjoyed and appreciated my video! I have many videos that cover a wide range of subjects, so be sure to look over my video playlists below for other great videos of interest to you, and most importantly share my channel with many others. Thank you ruclips.net/user/electronicsnmoreplaylists
A tip for everyone with the slow/no brew problem. After pressing Brew and the machine finishes pumping and actually starts to brew, hold your finger over the overflow tube. To get my 'VERY Slow flowing/dripping K145 Keurig to brew, I had to hold my finger over the overflow outlet at top of tank. It turns out this was caused by my solenoid leaking air thru it when it was supposed to be closed/ not energized (during brewing). My K145 had only one solenoid, but this video helped me disassemble the K145 and showed me how to test the solenoid. HUGE Thank You. Great Video. Only (this) one I found that did a dis-assembly and showed what internal parts did -or- should do! So if descaling, cleaaning both upper and lower needles and verifying your tank's screen is not clogged, it may well be your solenoid. Used ones are +/- $10 on ebay.
One of the best videos I've watched here. Very informative and just what I needed to test all the components on my Keurig B60. I agree with many others saying "to the point" and no BS. Thank you, I'll be watching your other videos soon. You are also not boring to listen too, like many others that do this~
On the Keurig 2.0, that thermal fuse (on the heater) connects directly to the hot side of the power cord. If that fuse is blown, nothing on the machine will work. No Screen, no power to the board, pumps, nothing. I used a non contact voltage tester and followed the path from the power cord to the + side of the thermal fuse and the voltage stopped on the other side of that thermal fuse. Made for an easy diagnosis and and fix for around $1.50 and back in business again. Very good video and since mine was apart, was easy to follow most of the other components! A++++ review
Found the problem in the very first test. Nobody ever explains in many of the online instructions how to separate the K-cup holder to allow access the needle. Bingo, full of grounds. I ran a paperclip up from the bottom hole and saw it come out the side of the needle in a place I couldn't see before. Thank you so much!
get the needle cleaning tool that a lot of them came with or can buy it. you put water in it and it uses suction to pull coffee grounds out of needle. a lot easier then paperclip.
Great job! My Keurig wouldn't work any more (no water flow at all) after de-scaling, and nothing else worked until I followed your instructions. Turns out that the inside of the heating tank was heavily scaled up, in spite of frequent de-scaling efforts. I cleaned out the scale buildup, put everything back together, and it works like new. Thanks!!
Outstanding video! Finally somebody who knows what they're talking about. Most of the "repair" videos for these things consist of somebody poking around and finally recommending standing on one foot and tapping the side of the unit with a silver spoon. This is actually helpful.
+Doug Alan You're correct. This video should be getting thousands of views. Most people do not know about this video. I have seen many of the other videos, and my video definitely rates at the top. Thanks
I truly appreciate your video & information regarding this coffee maker. I just have an issue with some manufactures that do not have service manuals available. btw I service electronic computers & devices for the past 25yrs, it amasses me how manufactures deliberately denied those manuals to certified individuals. Outstanding video !!
Best video on how to do a Keurig full deep clean hands down! This is above and beyond what I was looking for. Refreshing to find someone who really knows their stuff especially when dealing with electronics.
Glad you enjoyed it! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thank you ruclips.net/user/electronicsnmoreplaylists
@@electronicsNmore will do. Thank you! The problem most people have with many “how to” videos is in the details, things omitted, not well explained etc. you show things clearly, and explain. Most importantly you know of what you speak which is obviously important but not necessarily a reality in many videos!
6 year old video and im just finding you now? This is one of the best videos ive seen. Very detailed, great descriptions, video, audio and lighting. You sir have a new subscriber and I'm looking forward to more content.
This video exposed how much more there was to repairing this same model. I was so happy to have had it. It finally quit pumping water at all, leading me to believe it’s the exact same pump since everything else worked. You should see the new one I got to replace it yesterday. It makes Fisher Price look like it’s for adults. I got it from Amazon for $105.00. The model in the video is a Cadillac. The new one is a Chevy cavalier.
I was going to fix my Keurig & thought lets make a video about it. Well you Sir have taken already care of this better than I ever could've! Hat's off! From detail, audio, lighting, angle you haven't missed a spot. This was very refreshing to watch as it was done to perfection. Thank you and keep up the GREAT work.
Thanks for the very nice comment Dan! Be sure to rate thumbs up, subscribe, and look over my video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. ruclips.net/user/electronicsnmoreplaylists
Great video. I never would attempt to disassemble my Keurig, without watching your vid first. No need to drill out the rivet that holds the ground wires. Snip the wires with a wire cutter. At the plate, twist (or solder) the three wire stubs. At the other side of the cut, do the same thing. Connect a crimp-on terminal to each set of 3 wires. Now next time you need to remove the bottom plate, just pull the connector apart. When reinstalling the plate, connect the 2 connectors together. Oh yea, the thing on the left that holds water, that you removed after making sure the cup and funnel were not clogged, and before doing anything else. It's not a "side." It's a water reservoir.
Great video! Thank you for taking the time to post it. Anyone who gave your video a thumbs down were obviously overwhelmed by the "Highly Detailed" (as noted in your description) professional and technical information. They should have just left without having to be negative. I think they would be someone who couldn't figure out if an on/off switch was on (if there was one).
Thank you! Glad you enjoyed the video. I agree with what you said 100%. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. ruclips.net/user/electronicsnmoreplaylists
Great to hear Joe! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks ruclips.net/user/electronicsnmoreplaylists
Thank you my friend you save me a hundred bucks and I enjoyed taking the machine apart and cleaning it. I do home repair , but I've never taken a Keurig apart and now thanks to you mine is running excellently.
Great to hear Jeff! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks ruclips.net/user/electronicsnmoreplaylists
Our Keurig coffee maker wasn't making coffee with the pods. I did find that the reusable ones we bought worked fine. The other half was ready to throw it out. I had a feeling it was an easy fix and found your video. I only needed to go as far as the paperclip part, although I did use a toothpick thinking it might be a little more gentle and I couldn't find a paperclip as easily as a toothpick. My machine works great now. Thank you! We are on a pretty tight budget so buying a new one would have taken some doing.
Great vid. No wasted time talking about nonsense like in just about all the other "how to fix your Keurig" vids. Shows respect - my time is extremely valuable to me. You don't waste any of it. Thank you!!
Excellent video: detailed, contiguous, audible, great camera angle and lighting, removal of fasteners explained but edited out. Nice work. I have bookmarked it. Think a solenoid replacement is in our very near future. Thank you!
Glad you enjoyed it! I have many videos on my channel that cover a wide range of subjects, so be sure to check them out below and share. Thank you ruclips.net/user/electronicsnmoreplaylists
By far, one of the best tutorials I have found yet! Very easy to understand and right to the point. I should have followed this before I attempted to take apart my B60 by a different video.
Wow YOU ARE THE GREATEST VIDEO INSTRUCTOR. If i world have had you as a teacher in school I would be a engineer. Very detailed, to the point, proper language, clear view and angles. Kudos. BTW (I am a female with dyslexic).
Thanks for the very nice comment! Glad you enjoyed the video. Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. ruclips.net/user/electronicsnmoreplaylists
I've fixed several of these units and it has ALWAYS been the solenoid. I check them first. Keurig could fix this, but that wouldn't sell units. I order them on ebay for about $8 or so for a new one. Great job as usual!
After watching this video I took apart my old Keurig that would not stop humming so loud it shook our cabinets. Everything looked great all the lines were perfect. The only thing I could see with a yellowish tint was on the water intake boot met the pump. I removed the pump after disassembling it I found loads of rust inside and out fell a three-tier plastic with metal hollow cylinder with one hole through the side of the center cylinder. Rust wrapped around this whole peice. Needless to say happy we bought a new one and I now have a whole bunches of really good Keurig parts.
Well done. The half-cup issue on my older model was caused by dirty contacts on the cup selector switch. The lights weren't corresponding with where the knob was pointing. Turning the knob back and forth about 25 times cleaned the contacts and corrected the problem.
Great teardown video: identifying and demonstrating all the major components and how to test each one. If any of those parts are bad, I suspect it's not easy or economical to get direct-fit replacement parts. Might as well junk it and buy a new one. Planned obsolescence? That aside, wow, look at all those hoses!! I never would have guessed these Keurigs had so many!
It a fairly complex unit. Most people are surprised when they see the inside. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks Andrew! ruclips.net/user/electronicsnmoreplaylists
9:30...”so I just smashed it with a hamma” 😂 That sounds like the best way to manage those hooks! I appreciate your video and it saved me the purchase of a new one
Great video! I have a B60 which appears to be identical to the silver one in the video. I ultimately found that a guest apparently used it and attempted to run brewed coffee through it by placing coffee in the tank...I found it not drawing water from the tank and going to 'prime' error. Ultimately turned out that one or more tubes were clogged because of lots of coffee residue in the silicon tubing leading from the tank to the water pump, in the tubing leading to the top of the brewing tank. I had to disassemble, clean out several of the tubes, pump impeller and check valve after which it worked great. A couple of notes on this video. In my machine (B60) that screw far up in the housing did not need to be removed with a long screw driver....it holds the top panel but not the housing. But, I found an extra clip next to that screw which was holding the housing and did need the long screwdriver to unhook. Getting the three clips loose was by far the hardest part of the exercise....why Keurig puts them there is beyond me because the thing is solid without them. I ended up cutting off the part of the housing where those clips hook and leaving the clips for alignment only. The screws at the bottom hold the whole thing together nicely without those silly clips. If I ever need to take the thing apart again it will be a breeze. Thanks again for the video.
Bravo good sir!videos like this are what youtube should be known for! well spoken,to the point and not a second wasted.the first solution worked for me but I watched the entire video anyway and learned alot.Thankyou for taking the time to create and share this video.for what it's worth,you helped me during a coffee crises and imparted some knowledge about electrical components aswell. Thanks again man
Glad you enjoyed it! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share links to my videos with many others on social networking sites. Thanks ruclips.net/user/electronicsnmoreplaylists
Awesome video! When you took it apart I couldn't believe how yellowed the tube were from the coffee. YUCK! I just picked this one up. And the problem with this one is, it doesn't brew a full cup. I ran several cycles of just water through it. And every brew smelled like coffee. One thing that I haven't tried yet was rescaling it.
Wow, Excellent video! Very clear detailed , description, instructions video and added pictures when video was not optimal. The best of the best. That's the way to do a how to video. Thank you so much!
Thank you very much for the nice comment Brian! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. ruclips.net/user/electronicsnmoreplaylists
You're welcome Rob! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks ruclips.net/user/electronicsnmoreplaylists
Thanks for watching Jim! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. ruclips.net/user/electronicsnmoreplaylists
Best how-to video Ive ever seen. Wish I would have watched it before I Neandrathaled the outer cover off. I left a thumbs up and subscribed. Looking forward to watching your other videos with a nice cuppa java after my solenoid arrives.
He is very knowledgeable, but he has way too much time on his hands. This procedure is not for the faint of heart. Also, it's obvious he had no intention of ever putting it back together (hence the hammer and the comments about using the parts for something else). That's the hard part :). But like Don was indicating... now I now know it's time to spend another $100.
Glad you enjoyed the video! Please share my channel with others and look over my extensive video playlists for other great videos of interest to you. Thank you
The best video to learn about how the Keuring is built. If you still receive these comments, I would like to know how simple will it be to convert the Keuring to 200-220 v unit? Thanks
Glad you enjoyed it Jerry! Be sure to look over my extensive video playlists below for many other videos of interest to you, and MOST IMPORTANTLY take one minute to share a link to my RUclips channel with others on social networking sites. Thank you ruclips.net/user/electronicsnmoreplaylists
Great to hear! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlists below, and most importantly share. Thank you ruclips.net/user/electronicsnmoreplaylists
Glad you liked my video Steve! I have many videos like this on my channel, unfortunately a very large number don't get the views they deserve because people don't take one minute of their time to share my channel on other websites, FB, or Twitter. Thanks for watching
Great to hear Dan! Be sure to rate thumbs up, subscribe, and look over my video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you ruclips.net/user/electronicsnmoreplaylists
Outstanding. I ended up poking a sewing needing through the output pin in the k cup to clear. Unfortunately I looked online, AFTER I fixed issue. My machine is about 8 years old. Bound to have issues soon. This will help diagnose, and fix. Thank you.
Glad you enjoyed the video Brian! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Wow...really nice explanation and visuals. I learned a lot. I like the text comments on the video too. You covered more detail and safety precautions well. Thanks.
i have one unit like that and i had to find out how to take it apart in the past. i couldn't find any video as good as your video. excellent video. thank you
Brilliant. Wow the detail and clarity of your video is unbelievable. Quite obviously you are extremely well-versed in the field of electronic components.. Very well presented.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Good video, I was working a unit identical to the first one used for disassembly. very detailed in the component testing. Oddly, removal of the hidden screw was not required. That screw holds the display mount to the silver top cover. Nothing to do with disassembly, unless you want to remove the display after disassembly. There is however a third clip next to the screw that actually prevented the removal of the guts. I replaced the “hidden” screw before reassembly and the unit went together without an issue
Great video! I just disassembled the exact same model yesterday. I don't know yet what I will do with the electronic components salvaged. I decided a while ago, I would not throw away electronic devices without taking them apart and salvaging parts for other projects. Watching your video helped identifying some components. Let us know if you have project ideas with the salvaged parts.
Fixed mine thanks to your video. Pump, solenoid valve, and mini pump all tested fine. My problem was the holding tank was polluted with hard water chips....it was kinda gross really, and what a pita getting the cover off of that tank while still installed in the unit, but got it done and it's running like new now
Glad you enjoyed the video Darren! Be sure to look over my extensive video playlists for many other helpful videos of interest to you, and most importantly share links to my videos on social networking sites. Thanks ruclips.net/user/electronicsnmoreplaylists
excellent video. Really thorough explanations. Now I know how the Keurig blows the last drops of water out at the end of the fill. My Select K80 is not giving a complete fill and the flow is very slow. The water pump is noisy, so I think I must replace it. Thank you for this great video.
Glad you liked it! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you ruclips.net/user/electronicsnmoreplaylists
Thanks for taking the time to make this video. My machine has a hard time reloading water to the tank and machine often shuts itself off because it takes too long. Your video will help me isolate that problem as well.
Absolute best video I've found for Keurig disassembly. At 6 minutes, looking at the bottom of the machine, you can see a part that has 3 screws in a triangle shape. I think that is where my problem is. What did you find under those screws? I found a lavender colored thingy. What is it? What's it supposed to do? THANKS!!!
Your video was perfect!!! I’ve fixed several other problems but never had this one. I did what you showed & now I have a full cup of coffee & it’s taking the water as it should. My Kuerig is about 4 years old I think. Thanks again!!
Thanks. I wondered what was inside that thing! It is a technical marvel. Obviously they are not making money on the sale of the machine! Mine started to get slow and making smaller cups of coffee. The "Descale" light came on so I followed some instructions to pour 10 OZ of white vinegar into the tank. Actually I had to put 20 OZ into it to satisfy the water level. All was fine, I was cycling several cups of vinegar through the machine, through a coffee filter to catch debris and back through the machine again. At some point it stopped pumping. I tried the usual tricks, paper clip to clean the piercing needle on the outlet from tank. Used a turkey baster to force water. No good. Finally I took apart the head of the unit and removed the outlet check valve and filled the heating tank from above. Voila, It now works. Something that had clogged, probably preventing the pump to prime, now clear. That black filter unit or a solenoid might be troublesome. I will have to keep using i to see if keeps going.
It sure is a marvel. Glad you liked the video and got it working! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you ruclips.net/user/electronicsnmoreplaylists
Glad you enjoyed the video! Be sure to look over my extensive video playlists for other great videos of interest to you and most importantly share. Thanks!
Thank you! You're welcome. Be sure to look over my extensive video playlists below for other videos of interest to you, and most importantly share my channel with many others. ruclips.net/user/electronicsnmoreplaylists
Thank yo so much for this video and saving my Keurig All the other videos I've watched only had you clearing the top needle. As soon as I took the little bottom cup off and cleaned the bottom needle, it worked like a charm.
Hi, This is the best detailed video we have seen!! We have a Breville Keurig single brew BXC700 XL. The flow is very thin and slow. We have done everything from vinegar, paperclip, and moving the top and cleaning the hoses. We now think that the needle is different from the Keurig 2.0, so my question is, can we swap out the needle for a Keurig 2.0 unit?
You're welcome! Please share my channel with many others, and look over my extensive video playlists below for other videos of interest to you. Thanks for watching ruclips.net/user/electronicsnmoreplaylists
It's been quite a while since there has been activity on this post. However, if you're still monitoring comments, I would certainly appreciate some advice. My Kuerig continually pumps water when it's powered on...basically till the reservoir runs empty. What could cause this issue? A bad solenoid? I have a Kuerig b70 platinum. And I've done all the initial cleaning, inspection, descaling steps. I loved the video btw...thanks for speaking clearly and being so meticulous.
very good video on how it works from a to z. are you a designer of the unit or just a tinkerer? Thank you for your time to put this video together. Most helpful.
not having a long enough Philips to completely dismantle the device, I found that the one way valve under the top cover was the culprit. The valve itself was stuck. I just removed it, forced air to open it up again, and it worked. I am now the office hero.
Great tutorial. On 6:30 you mention to need to have a long philips screwdriver to remove the hidden screw. I found out you also need a long flat screw driver to unlock the latch that is next to this philips screw driver. That way the entire top is released without having to mess with the two other latches on the back that you mentioned are inaccessible.
I appreciate that Tommy! Glad you enjoyed the video. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites.Thank you ruclips.net/user/electronicsnmoreplaylists
I have an almost new one but it was in storage for awhile. Someone said there is reservoir inside. I just want to take it apart and drain it and clean the hose in vinegar. Can you do a instructional video on that for a keurig 860? I’m sure other components are working well. I just want clean hosing lines and reservoir. Love you video. I didn’t realize it had so many things inside.
Spectacular video! Is the valve that failed the typical point for scale buildup that slows the brewing process? My machine still works, but descaling doesn't clear it up as much as it should. If I'm lucky, the free machine I picked up the other day will work again, thanks to you! Great job!
It can also be the fine mesh filter in the removable water chamber is partially or fully clogged with hard water sediment. Removing the filter with a long Philips head screw driver is required. I suppose if you had a large enough amount of vinegar to set the reservoir in that could work also. Cleaning the keurig machine directly will not work. The filter needs to be immersed in strong vinegar or Keurig machine cleaner and rinsed out and then the soak repeated. This will solve the problem in most cases I disassembled my keurig to fix it. It was worse then this easy fix. I recommend anyone do this as a LAST RESORT ! LOL Great Video Series !
I went through 2 of this particular model! Keurig always sent me a brand new one all I had to do was send them the kcup holder and they sent me a new one! I didn’t get my father’s mechanical ability, so this is a bunch of gibberish to me😊!
Glad you liked it! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thanks ruclips.net/user/electronicsnmoreplaylists
I have a brand new k duo. There are no screws under the main head to open the top and clean the pump lines. I am not saying this right I know, but do you have any suggestions? Thank you. Love your video.
I don't know if it is mentioned in the video, but the small rubber gromment that is around the shaft that pierces the top of the cup may come dislodged during disassembly. It must be around the shaft that pierces the top of the cup or there will be a mess. The gromment is shown at the 14:40 time of the video.
Hope that's it! Be sure to share my channel with others, and look over my extensive video playlists below for other videos of interest to you. Thank you ruclips.net/user/electronicsnmoreplaylists
I realize this is an older video, but any recommendations on what meter / tester is needed for testing the parts. Specifically the 12v pump. I tried searching the comments, but nothing came up.
Does the heating tank take 120VAC at the bottom wires to heat the water? I was hoping you would mention that at the end of your video. I would love to make some water boil in that great tank by applying the proper voltage to the bottom 2 wires. Thank you for this great video.
That's great to know. I just isolated the boiler from the rest of the unit and remounted it on it's plastic housing so it can stand upright again. It would be great to experiment with it. Thank you very much for taking the time to reply. I love your channel and your in-depth videos. I wish you great health and many happy years of tinkering and learning.
Got two internal Phillips screws releases the door assembly and gives access to the door microswitch. Of course top cap has to come off first. I didn't even have to undo hoses to top of k-cup filler.
I've repaired a lot of appliances and electronics. This is by FAR the best, most technically descriptive video posted on any device. This is beyond trouble shooting, It describes the function of each component and shows how to test it. Nothing is left out!!
You should've been a University Professor, clear communication, explain and instruct at just the right level. Clear video and nice sound.
Thanks for the nice comment, and thanks for watching!
I've collected several non-working Keurig's from garage sales and with the help of your video, I now have a perfectly good functioning machine...all-toll...about $5 bucks and plenty of spare parts...More often than not, I get them free. Thanks, makes for a good rainy day project! I also enjoy working on old vacuum-tube-type radio's...
Nice work, and extremely thorough walk-through of the Keurig. It's refreshing to find someone on RUclips who actually knows what they're talking about for a change. I really appreciated your effort and the time you put into making this video. Having done things like this for a living (degree in Electronics Engineering), I can relate and thoroughly enjoyed it. Thanks again!!!
I know Im randomly asking but does any of you know of a way to get back into an Instagram account?
I stupidly lost the account password. I would appreciate any tips you can offer me.
@Andrew Randall Instablaster =)
@Dwayne Mateo Thanks for your reply. I found the site thru google and I'm trying it out atm.
Looks like it's gonna take a while so I will get back to you later with my results.
@Dwayne Mateo It worked and I actually got access to my account again. I am so happy!
Thank you so much, you really help me out :D
@Andrew Randall No problem =)
I too really liked the extra details you provided (e.g. the three different level probes in the heater tank). I fully agree with other viewer's comments: "refreshing to find someone on RUclips who actually knows what they are talking about"! I also appreciate the way this training was delivered, e.g. great lighting, camera angles, clear audio, good speaking pace, clearly pointing out the subject of each set of comments, etc. The bottom line... quality of this training is really just off-the-charts and pure goodness!
Glad you enjoyed and appreciated my video! I have many videos that cover a wide range of subjects, so be sure to look over my video playlists below for other great videos of interest to you, and most importantly share my channel with many others. Thank you
ruclips.net/user/electronicsnmoreplaylists
A tip for everyone with the slow/no brew problem. After pressing Brew and the machine finishes pumping and actually starts to brew, hold your finger over the overflow tube. To get my 'VERY Slow flowing/dripping K145 Keurig to brew, I had to hold my finger over the overflow outlet at top of tank. It turns out this was caused by my solenoid leaking air thru it when it was supposed to be closed/ not energized (during brewing). My K145 had only one solenoid, but this video helped me disassemble the K145 and showed me how to test the solenoid. HUGE Thank You. Great Video. Only (this) one I found that did a dis-assembly and showed what internal parts did -or- should do!
So if descaling, cleaaning both upper and lower needles and verifying your tank's screen is not clogged, it may well be your solenoid. Used ones are +/- $10 on ebay.
One of the best videos I've watched here. Very informative and just what I needed to test all the components on my Keurig B60. I agree with many others saying "to the point" and no BS.
Thank you, I'll be watching your other videos soon. You are also not boring to listen too, like many others that do this~
Very helpful video. This seems to be the only place on the Internet to find service info regarding these units.
On the Keurig 2.0, that thermal fuse (on the heater) connects directly to the hot side of the power cord. If that fuse is blown, nothing on the machine will work. No Screen, no power to the board, pumps, nothing. I used a non contact voltage tester and followed the path from the power cord to the + side of the thermal fuse and the voltage stopped on the other side of that thermal fuse. Made for an easy diagnosis and and fix for around $1.50 and back in business again.
Very good video and since mine was apart, was easy to follow most of the other components! A++++ review
Found the problem in the very first test. Nobody ever explains in many of the online instructions how to separate the K-cup holder to allow access the needle. Bingo, full of grounds. I ran a paperclip up from the bottom hole and saw it come out the side of the needle in a place I couldn't see before. Thank you so much!
You're welcome! Be sure to rate thumbs up, check out my "Useful Tips" video playlist, and share my YT channel with others. Thanks
get the needle cleaning tool that a lot of them came with or can buy it. you put water in it and it uses suction to pull coffee grounds out of needle. a lot easier then paperclip.
Great job! My Keurig wouldn't work any more (no water flow at all) after de-scaling, and nothing else worked until I followed your instructions. Turns out that the inside of the heating tank was heavily scaled up, in spite of frequent de-scaling efforts. I cleaned out the scale buildup, put everything back together, and it works like new. Thanks!!
+silverstate55
Great to hear! Be sure to share my channel with others, check out my video playlists, and rate thumbs up. Thanks
GREAT VID!!
IM A REPAIRMAN, AND I STILL LEARNED FROM YOUR VIDEO AND TESTING!
Great to hear!
Outstanding video! Finally somebody who knows what they're talking about. Most of the "repair" videos for these things consist of somebody poking around and finally recommending standing on one foot and tapping the side of the unit with a silver spoon.
This is actually helpful.
+Doug Alan
You're correct. This video should be getting thousands of views. Most people do not know about this video. I have seen many of the other videos, and my video definitely rates at the top.
Thanks
I truly appreciate your video & information regarding this coffee maker. I just have an issue with some manufactures that do not have service manuals available. btw I service electronic computers & devices for the past 25yrs, it amasses me how manufactures deliberately denied those manuals to certified individuals. Outstanding video !!
Best video on how to do a Keurig full deep clean hands down! This is above and beyond what I was looking for. Refreshing to find someone who really knows their stuff especially when dealing with electronics.
Glad you enjoyed it! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thank you
ruclips.net/user/electronicsnmoreplaylists
@@electronicsNmore will do. Thank you! The problem most people have with many “how to” videos is in the details, things omitted, not well explained etc. you show things clearly, and explain. Most importantly you know of what you speak which is obviously important but not necessarily a reality in many videos!
6 year old video and im just finding you now? This is one of the best videos ive seen. Very detailed, great descriptions, video, audio and lighting. You sir have a new subscriber and I'm looking forward to more content.
This video exposed how much more there was to repairing this same model. I was so happy to have had it. It finally quit pumping water at all, leading me to believe it’s the exact same pump since everything else worked. You should see the new one I got to replace it yesterday. It makes Fisher Price look like it’s for adults. I got it from Amazon for $105.00.
The model in the video is a Cadillac. The new one is a Chevy cavalier.
:-) Thanks for watching!
I was going to fix my Keurig & thought lets make a video about it. Well you Sir have taken already care of this better than I ever could've! Hat's off!
From detail, audio, lighting, angle you haven't missed a spot. This was very refreshing to watch as it was done to perfection. Thank you and keep up the GREAT work.
Thanks for the very nice comment Dan! Be sure to rate thumbs up, subscribe, and look over my video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated.
ruclips.net/user/electronicsnmoreplaylists
Great video. I never would attempt to disassemble my Keurig, without watching your vid first. No need to drill out the rivet that holds the ground wires. Snip the wires with a wire cutter. At the plate, twist (or solder) the three wire stubs. At the other side of the cut, do the same thing. Connect a crimp-on terminal to each set of 3 wires. Now next time you need to remove the bottom plate, just pull the connector apart. When reinstalling the plate, connect the 2 connectors together.
Oh yea, the thing on the left that holds water, that you removed after making sure the cup and funnel were not clogged, and before doing anything else. It's not a "side." It's a water reservoir.
Great video! Thank you for taking the time to post it.
Anyone who gave your video a thumbs down were obviously overwhelmed by the "Highly Detailed" (as noted in your description) professional and technical information. They should have just left without having to be negative. I think they would be someone who couldn't figure out if an on/off switch was on (if there was one).
Thank you! Glad you enjoyed the video. I agree with what you said 100%. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites.
ruclips.net/user/electronicsnmoreplaylists
Much like the previous comments, I agree that this was very informative! Thank you for the effort and whoever you work for is fortunate to have you.
Best ever video for disasembly. I could not stop watching it.
Great to hear Joe! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks
ruclips.net/user/electronicsnmoreplaylists
This is one of the best disassembly videos I have seen.
Thanks Dave. Be sure to rate thumbs up, share my channel with others, and check out my video playlists. :-)
Thank you my friend you save me a hundred bucks and I enjoyed taking the machine apart and cleaning it.
I do home repair , but I've never taken a Keurig apart and now thanks to you mine is running excellently.
Great to hear Jeff! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks
ruclips.net/user/electronicsnmoreplaylists
Our Keurig coffee maker wasn't making coffee with the pods. I did find that the reusable ones we bought worked fine. The other half was ready to throw it out. I had a feeling it was an easy fix and found your video. I only needed to go as far as the paperclip part, although I did use a toothpick thinking it might be a little more gentle and I couldn't find a paperclip as easily as a toothpick. My machine works great now. Thank you! We are on a pretty tight budget so buying a new one would have taken some doing.
I really hope that you are an instructor at a college! You explain things in a non-threatening manner and very thorough. Thank you!
Glad you enjoyed my video!
I kinda felt threatened
Great vid. No wasted time talking about nonsense like in just about all the other "how to fix your Keurig" vids.
Shows respect - my time is extremely valuable to me. You don't waste any of it.
Thank you!!
Excellent video: detailed, contiguous, audible, great camera angle and lighting, removal of fasteners explained but edited out. Nice work. I have bookmarked it. Think a solenoid replacement is in our very near future. Thank you!
Glad you enjoyed it! I have many videos on my channel that cover a wide range of subjects, so be sure to check them out below and share. Thank you
ruclips.net/user/electronicsnmoreplaylists
By far, one of the best tutorials I have found yet! Very easy to understand and right to the point. I should have followed this before I attempted to take apart my B60 by a different video.
Thanks Steve!
Wow YOU ARE THE GREATEST VIDEO INSTRUCTOR. If i world have had you as a teacher in school I would be a engineer. Very detailed, to the point, proper language, clear view and angles. Kudos. BTW (I am a female with dyslexic).
Thanks for the very nice comment! Glad you enjoyed the video. Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites.
ruclips.net/user/electronicsnmoreplaylists
I've fixed several of these units and it has ALWAYS been the solenoid. I check them first. Keurig could fix this, but that wouldn't sell units. I order them on ebay for about $8 or so for a new one. Great job as usual!
+Rick Raulston
Thanks For Watching!
After watching this video I took apart my old Keurig that would not stop humming so loud it shook our cabinets. Everything looked great all the lines were perfect. The only thing I could see with a yellowish tint was on the water intake boot met the pump. I removed the pump after disassembling it I found loads of rust inside and out fell a three-tier plastic with metal hollow cylinder with one hole through the side of the center cylinder. Rust wrapped around this whole peice. Needless to say happy we bought a new one and I now have a whole bunches of really good Keurig parts.
Rust is never a good thing.
Well done. The half-cup issue on my older model was caused by dirty contacts on the cup selector switch. The lights weren't corresponding with where the knob was pointing. Turning the knob back and forth about 25 times cleaned the contacts and corrected the problem.
Great teardown video: identifying and demonstrating all the major components and how to test each one. If any of those parts are bad, I suspect it's not easy or economical to get direct-fit replacement parts. Might as well junk it and buy a new one. Planned obsolescence? That aside, wow, look at all those hoses!! I never would have guessed these Keurigs had so many!
It a fairly complex unit. Most people are surprised when they see the inside. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks Andrew!
ruclips.net/user/electronicsnmoreplaylists
9:30...”so I just smashed it with a hamma” 😂
That sounds like the best way to manage those hooks! I appreciate your video and it saved me the purchase of a new one
Great video! I have a B60 which appears to be identical to the silver one in the video. I ultimately found that a guest apparently used it and attempted to run brewed coffee through it by placing coffee in the tank...I found it not drawing water from the tank and going to 'prime' error. Ultimately turned out that one or more tubes were clogged because of lots of coffee residue in the silicon tubing leading from the tank to the water pump, in the tubing leading to the top of the brewing tank. I had to disassemble, clean out several of the tubes, pump impeller and check valve after which it worked great.
A couple of notes on this video. In my machine (B60) that screw far up in the housing did not need to be removed with a long screw driver....it holds the top panel but not the housing. But, I found an extra clip next to that screw which was holding the housing and did need the long screwdriver to unhook. Getting the three clips loose was by far the hardest part of the exercise....why Keurig puts them there is beyond me because the thing is solid without them. I ended up cutting off the part of the housing where those clips hook and leaving the clips for alignment only. The screws at the bottom hold the whole thing together nicely without those silly clips. If I ever need to take the thing apart again it will be a breeze.
Thanks again for the video.
Bravo good sir!videos like this are what youtube should be known for! well spoken,to the point and not a second wasted.the first solution worked for me but I watched the entire video anyway and learned alot.Thankyou for taking the time to create and share this video.for what it's worth,you helped me during a coffee crises and imparted some knowledge about electrical components aswell. Thanks again man
Glad you enjoyed it! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share links to my videos with many others on social networking sites. Thanks
ruclips.net/user/electronicsnmoreplaylists
Awesome video! When you took it apart I couldn't believe how yellowed the tube were from the coffee. YUCK! I just picked this one up. And the problem with this one is, it doesn't brew a full cup. I ran several cycles of just water through it. And every brew smelled like coffee. One thing that I haven't tried yet was rescaling it.
Wow, Excellent video! Very clear detailed , description, instructions video and added pictures when video was not optimal. The best of the best. That's the way to do a how to video. Thank you so much!
Thank you very much for the nice comment Brian! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites.
ruclips.net/user/electronicsnmoreplaylists
This is a really great teardown. Thank you.
Glad you enjoyed the video dan! Thanks for watching
Thanks, this video was clear and concise without a bunch of extra talk.
You're welcome Rob! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks
ruclips.net/user/electronicsnmoreplaylists
"Not putting this one back together so I just smashed it with a hammer" -regarding the clip.
Excellent how to video - very thorough 😎
Thanks for watching Jim! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others.
ruclips.net/user/electronicsnmoreplaylists
Best how-to video Ive ever seen. Wish I would have watched it before I Neandrathaled the outer cover off. I left a thumbs up and subscribed. Looking forward to watching your other videos with a nice cuppa java after my solenoid arrives.
Awesome, thanks for the nice comment! Wish you well. Be sure to share.
Thanks. I learned that this thing isn't worth all the effort to take it apart to fix it.
My boss told me to fix ours at the office cause it was malfunctioning, so i bought a new one with the jobs credit card.
He is very knowledgeable, but he has way too much time on his hands. This procedure is not for the faint of heart. Also, it's obvious he had no intention of ever putting it back together (hence the hammer and the comments about using the parts for something else). That's the hard part :). But like Don was indicating... now I now know it's time to spend another $100.
You are impressively AWESOME!!! KNOWLEDGE, PRESENTATION, EXPLANATIONS,DIRECTIONS!!! Thank you !!!
Glad you enjoyed it! Be sure to check out my other videos, rate thumbs up, and share my channel with others. Thanks
Incredibly thorough and organized in detail! Bravo! And Thanks!
Glad you enjoyed the video! Please share my channel with others and look over my extensive video playlists for other great videos of interest to you. Thank you
The best video to learn about how the Keuring is built. If you still receive these comments, I would like to know how simple will it be to convert the Keuring to 200-220 v unit? Thanks
Hello Moshe. I posted a link in the video description area to a converter that is safe to use for high current electronic devices.
@@electronicsNmore could not find it.
@@myaloy Under the video player window, to the right of the title, click the small arrow.
One of the best trouble shooting videos I've ever seen in all my RUclips watching. My hat is off to you sir well done.
Glad you enjoyed it Jerry! Be sure to look over my extensive video playlists below for many other videos of interest to you, and MOST IMPORTANTLY take one minute to share a link to my RUclips channel with others on social networking sites. Thank you
ruclips.net/user/electronicsnmoreplaylists
I could listen to you all day so knowledgeable.
Great to hear! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlists below, and most importantly share. Thank you
ruclips.net/user/electronicsnmoreplaylists
I do electronic & electrical repairs and I must say your video is very thorough...excellent job!...Thank You
Nathan Fryer Thanks Nathan! Be sure to check out my extensive video playlists, rate thumbs up, and share my channel.
Great video! Very concise and well presented. I was able to get the answers I was looking for. Thank you for a taking the time to create this video.
All tutorials should be this good!! Great job
Glad you liked my video Steve! I have many videos like this on my channel, unfortunately a very large number don't get the views they deserve because people don't take one minute of their time to share my channel on other websites, FB, or Twitter. Thanks for watching
He fixed my problem in the first 30 seconds of the video. The tube in the bottom of the basket was plugged.
Great to hear Dan! Be sure to rate thumbs up, subscribe, and look over my video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you
ruclips.net/user/electronicsnmoreplaylists
Outstanding.
I ended up poking a sewing needing through the output pin in the k cup to clear.
Unfortunately I looked online, AFTER I fixed issue.
My machine is about 8 years old. Bound to have issues soon.
This will help diagnose, and fix. Thank you.
Glad you enjoyed the video Brian! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Superb video. Very impressed by your narration and detail. Thank you. Happy to subscribe!
Wow...really nice explanation and visuals. I learned a lot. I like the text comments on the video too. You covered more detail and safety precautions well. Thanks.
Glad you enjoyed my video! Be sure to look over my extensive video playlists and share. Thank you
ruclips.net/user/electronicsnmoreplaylists
i have one unit like that and i had to find out how to take it apart in the past.
i couldn't find any video as good as your video.
excellent video.
thank you
+moshe2002
Thank You!
Brilliant. Wow the detail and clarity of your video is unbelievable. Quite obviously you are extremely well-versed in the field of electronic components.. Very well presented.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Good video, I was working a unit identical to the first one used for disassembly. very detailed in the component testing. Oddly, removal of the hidden screw was not required. That screw holds the display mount to the silver top cover. Nothing to do with disassembly, unless you want to remove the display after disassembly. There is however a third clip next to the screw that actually prevented the removal of the guts. I replaced the “hidden” screw before reassembly and the unit went together without an issue
Thanks for watching Dave!
Great video! I just disassembled the exact same model yesterday. I don't know yet what I will do with the electronic components salvaged. I decided a while ago, I would not throw away electronic devices without taking them apart and salvaging parts for other projects. Watching your video helped identifying some components. Let us know if you have project ideas with the salvaged parts.
Thanks for watching Stephen!
Excellent video . . . very good instructions. I got stuck at removing the top assembly. I couldn't find it in the video.
Perfecto! Wish I had taken apart my first Keurig when it bit the dust. Great video. Very informative.
GREAT video. easy to follow.. troubleshooting mine as it just keeps pumping water till the reservoir empties...??
Fixed mine thanks to your video. Pump, solenoid valve, and mini pump all tested fine. My problem was the holding tank was polluted with hard water chips....it was kinda gross really, and what a pita getting the cover off of that tank while still installed in the unit, but got it done and it's running like new now
Great to hear! Be sure to share my channel with others, and check out my video playlists. Thanks
Very informative video. Video is a great teaching aid in electronics applications. Thanks for the effort.
Glad you enjoyed the video Darren! Be sure to look over my extensive video playlists for many other helpful videos of interest to you, and most importantly share links to my videos on social networking sites. Thanks
ruclips.net/user/electronicsnmoreplaylists
excellent video. Really thorough explanations. Now I know how the Keurig blows the last drops of water out at the end of the fill. My Select K80 is not giving a complete fill and the flow is very slow. The water pump is noisy, so I think I must replace it. Thank you for this great video.
Glad you liked it! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you
ruclips.net/user/electronicsnmoreplaylists
Thanks for taking the time to make this video. My machine has a hard time reloading water to the tank and machine often shuts itself off because it takes too long. Your video will help me isolate that problem as well.
Inspect all lines, valves, and the pump. Thanks fro watching!
Absolute best video I've found for Keurig disassembly. At 6 minutes, looking at the bottom of the machine, you can see a part that has 3 screws in a triangle shape. I think that is where my problem is. What did you find under those screws? I found a lavender colored thingy. What is it? What's it supposed to do? THANKS!!!
It's been so long that I couldn't tell you. It may be a float or check valve. Thank you for watching!
Your video was perfect!!! I’ve fixed several other problems but never had this one. I did what you showed & now I have a full cup of coffee & it’s taking the water as it should. My Kuerig is about 4 years old I think. Thanks again!!
Thanks. I wondered what was inside that thing! It is a technical marvel. Obviously they are not making money on the sale of the machine! Mine started to get slow and making smaller cups of coffee. The "Descale" light came on so I followed some instructions to pour 10 OZ of white vinegar into the tank. Actually I had to put 20 OZ into it to satisfy the water level. All was fine, I was cycling several cups of vinegar through the machine, through a coffee filter to catch debris and back through the machine again. At some point it stopped pumping. I tried the usual tricks, paper clip to clean the piercing needle on the outlet from tank. Used a turkey baster to force water. No good. Finally I took apart the head of the unit and removed the outlet check valve and filled the heating tank from above. Voila, It now works. Something that had clogged, probably preventing the pump to prime, now clear. That black filter unit or a solenoid might be troublesome. I will have to keep using i to see if keeps going.
It sure is a marvel. Glad you liked the video and got it working! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thank you
ruclips.net/user/electronicsnmoreplaylists
I love that you make a lot of the instructions idiot-proof. Very important!
Glad you enjoyed the video! Be sure to look over my extensive video playlists for other great videos of interest to you and most importantly share. Thanks!
EXCELLENT INSTRUCTION! very thorough! Thank you!
Thank you! You're welcome. Be sure to look over my extensive video playlists below for other videos of interest to you, and most importantly share my channel with many others.
ruclips.net/user/electronicsnmoreplaylists
Thank yo so much for this video and saving my Keurig All the other videos I've watched only had you clearing the top needle. As soon as I took the little bottom cup off and cleaned the bottom needle, it worked like a charm.
Glad my video helped! Be sure to rate thumbs up, check out my extensive video playlists, and share. Thanks
Already subscribed and gave it a thumbs. Looking forward to watching more and sharing. Thanks again.
Hi,
This is the best detailed video we have seen!!
We have a Breville Keurig single brew BXC700 XL. The flow is very thin and slow. We have done everything from vinegar, paperclip, and moving the top and cleaning the hoses.
We now think that the needle is different from the Keurig 2.0, so my question is, can we swap out the needle for a Keurig 2.0 unit?
Glad you enjoyed my video! I'm not sure if you can, you'd need to look up the parts online and try to compare them. Thanks for watching!
I just fixed mine. It was the cup needle. Thank you.
You're welcome! Please share my channel with many others, and look over my extensive video playlists below for other videos of interest to you. Thanks for watching
ruclips.net/user/electronicsnmoreplaylists
It's been quite a while since there has been activity on this post. However, if you're still monitoring comments, I would certainly appreciate some advice. My Kuerig continually pumps water when it's powered on...basically till the reservoir runs empty. What could cause this issue? A bad solenoid? I have a Kuerig b70 platinum. And I've done all the initial cleaning, inspection, descaling steps.
I loved the video btw...thanks for speaking clearly and being so meticulous.
Check valve bottom of tank. Make sure it's clean. The entire system may need to be descaled.
For those people, the same people that the safety gas cans are made for! The first step is to unplug the coffee pot! 🤪. Very good video
Brilliant! many thanks for an exceptional informative video.
Excellent explanation of the teardown process! Thank you!
Jo Valente Thanks for watching!
very good video on how it works from a to z. are you a designer of the unit or just a tinkerer? Thank you for your time to put this video together. Most helpful.
I didn't design the unit. Glad you enjoyed the video! Be sure to share my channel with many others. Thanks!
not having a long enough Philips to completely dismantle the device, I found that the one way valve under the top cover was the culprit. The valve itself was stuck. I just removed it, forced air to open it up again, and it worked. I am now the office hero.
Great tutorial. On 6:30 you mention to need to have a long philips screwdriver to remove the hidden screw. I found out you also need a long flat screw driver to unlock the latch that is next to this philips screw driver. That way the entire top is released without having to mess with the two other latches on the back that you mentioned are inaccessible.
Yes, that helps. Thanks for watching!
Perfection in action . Salute.
Very nice job. You are a great teacher. Thanks.
I appreciate that Tommy! Glad you enjoyed the video. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites.Thank you
ruclips.net/user/electronicsnmoreplaylists
I have an almost new one but it was in storage for awhile. Someone said there is reservoir inside. I just want to take it apart and drain it and clean the hose in vinegar. Can you do a instructional video on that for a keurig 860? I’m sure other components are working well. I just want clean hosing lines and reservoir. Love you video. I didn’t realize it had so many things inside.
Spectacular video! Is the valve that failed the typical point for scale buildup that slows the brewing process? My machine still works, but descaling doesn't clear it up as much as it should.
If I'm lucky, the free machine I picked up the other day will work again, thanks to you! Great job!
Build up can develop in a few different areas. Thanks for watching! Glad you liked the video.
It can also be the fine mesh filter in the
removable water chamber is partially or fully clogged with hard water
sediment. Removing the filter with a long Philips head screw driver is
required. I suppose if you had a large enough amount of vinegar to set
the reservoir in that could work also. Cleaning the keurig machine
directly will not work. The filter needs to be immersed in strong
vinegar or Keurig machine cleaner and rinsed out and then the soak
repeated. This will solve the problem in most cases
I disassembled my keurig to fix it.
It was worse then this easy fix.
I recommend anyone do this as a LAST RESORT ! LOL
Great Video Series !
I went through 2 of this particular model! Keurig always sent me a brand new one all I had to do was send them the kcup holder and they sent me a new one! I didn’t get my father’s mechanical ability, so this is a bunch of gibberish to me😊!
😂 Thanks for watching!
Waooo excelent video you are a genius. Thank you so much for your time and your video. I follow you right now 😄
100% of posters- “wow great video, perfect instructions”.... proceeds to say that’s crazy and buys a new one.
Very nice video. Properly explained
Glad you liked it! Be sure to rate thumbs up, consider subscribing if you like a wide range of helpful and informative videos, and look over my extensive video playlists below for many other videos of interest to you. Taking one minute to share a link to my channel with others on social networking sites would be greatly appreciated. Thanks
ruclips.net/user/electronicsnmoreplaylists
Your videos are awesome at least you answer your viewers questions
This is an excellent video. GREAT JOB
Dave
+Dave Ingland
Glad you liked it! Be sure to share my channel with others and rate thumbs up. Thank You
I have a brand new k duo. There are no screws under the main head to open the top and clean the pump lines. I am not saying this right I know, but do you have any suggestions? Thank you. Love your video.
I don't know if it is mentioned in the video, but the small rubber gromment that is around the shaft that pierces the top of the cup may come dislodged during disassembly. It must be around the shaft that pierces the top of the cup or there will be a mess. The gromment is shown at the 14:40 time of the video.
Wow! I think I may have a faulty solenoid. Superb video. Thank you!
Hope that's it! Be sure to share my channel with others, and look over my extensive video playlists below for other videos of interest to you. Thank you
ruclips.net/user/electronicsnmoreplaylists
Excellent video! Well done!
Thank you very much!
I realize this is an older video, but any recommendations on what meter / tester is needed for testing the parts. Specifically the 12v pump. I tried searching the comments, but nothing came up.
Does the heating tank take 120VAC at the bottom wires to heat the water? I was hoping you would mention that at the end of your video. I would love to make some water boil in that great tank by applying the proper voltage to the bottom 2 wires. Thank you for this great video.
The heating element is 120vac.
That's great to know. I just isolated the boiler from the rest of the unit and remounted it on it's plastic housing so it can stand upright again. It would be great to experiment with it. Thank you very much for taking the time to reply. I love your channel and your in-depth videos. I wish you great health and many happy years of tinkering and learning.
Got two internal Phillips screws releases the door assembly and gives access to the door microswitch. Of course top cap has to come off first. I didn't even have to undo hoses to top of k-cup filler.