2010 CTS 3.0L WATER PUMP REPLACEMENT

Поделиться
HTML-код
  • Опубликовано: 23 окт 2024

Комментарии • 15

  • @PedroPratts
    @PedroPratts 4 месяца назад +1

    Any idea on the torque specs for the water pump or did you just run em till you felt they were tight

    • @OC_82
      @OC_82 3 месяца назад

      its 89 in/lbs or ~7.5 ft/lbs also the bolts should be replaced with the water pump as they aren't supposed to be reused

  • @lawrencethoms4489
    @lawrencethoms4489 3 года назад

    Great video, and good instructions. Tks..

  • @josecabello7178
    @josecabello7178 2 года назад

    How did you clean off the housing/base? The black film is really a pain to come off. I only have a few spots that are clean to the chrome.

  • @horacespencer4007
    @horacespencer4007 Год назад

    You made that look easy

  • @ryanmorgan4071
    @ryanmorgan4071 3 года назад

    Hey Parts Shooter! Appreciate your content, very useful! I have a 2010 CTS 3.0 that needs a power sterring pump. you dont happen to have an upload of that or might be able to give some tips on replacement procedure? thanks brother!!!

    • @PedroPratts
      @PedroPratts 4 месяца назад

      ruclips.net/video/k_htGmLkWfM/видео.htmlsi=-uZ59f5dQfmXL60L power steering pump replacement

  • @Lovetolivetruely
    @Lovetolivetruely 2 года назад

    How could you tell if that pump was bad other than the leakage?
    Mine spins pretty easy so I'm thinking it's bad.

    • @Lovetolivetruely
      @Lovetolivetruely 2 года назад

      Also I don't have an impact but did you say there's a way to wedge a screwdriver in the pulley to loosen the bolts?

    • @partsshooter
      @partsshooter  2 года назад

      @@Lovetolivetruely water pumps can fail by freewheeling, impeller can degrade, bearing can whine loudly or roar.
      Removal, you can try 2 wrenches on opposing bolts. Wedging a screw driver between 2 bolts. There's also lots of tools to support and hold the water pump pulley or adjustable one that clamp onto the bolts.

    • @Lovetolivetruely
      @Lovetolivetruely 2 года назад

      @@partsshooter Thank you for a speedy reply.... That really helps.....

  • @feMARIE614
    @feMARIE614 4 года назад

    Thank you Jesus!! Wait will this work the same way on a 3.6 engine for a 2010 Camaro!?

    • @partsshooter
      @partsshooter  4 года назад

      The water pumps have the same part numbers.... I can't guarantee the exact same process

  • @garbagemann9249
    @garbagemann9249 13 дней назад

    Never mistake a lac for a raggedy azz Chrysler