They’ve made a mood ring keyboard, a velvet keyboard, a wooden keyboard, and now finally a resin keyboard. Now, all that’s left is to make one out of soap.
I think Millie (short for Millibar) would be a great companion name for Pascal. Especially since the ratio of millibar to pascal is fitting for the sizes of the pressure pots.
I would suggest the new pressure pot be called Barye (Barry) to keep in theme with Pascal as a unit of measure for pressure. Barye is the CGS standard unit equal to 0.1 pascals, so there is an inverse proportional relation between the pressure pots, but that's because nothing can compare to the original.
Dear Evan & Katelyn! Me as a guy who likes glowsticks, I had to figure out a way to have rechargable ones. I found super great ideas on the internet and I had my own toughts as well. I made a few one(using resin) and it turned out pretty well. If you guys would like to make a project that only require a few days, I have the best idea for you! I will tell you the ideas later, 'cause I assume you won't see this. Have a wonderfull week, best wishes! David (Thanks guys for likes and comments!! I hope we can reach E and K to do thissss!!!)
Based on collabs with other RUclipsrs, I don’t even think Katelyn is particularly petite. I think Evan is just unbelievably tall. That’s why he always has back problems, poor guy.
@@MeredithHagan I think Evan is around 6'5 (maybe it was 6'7, I can't remember)? And Katelyn was around 5'7 or something. In their mixing all their resin pigments video I believe, they have their heights displayed at one point
@@redbengal16 Evan is 6'5" and Katelyn is 5'6". She's actually pretty average, but Evan is a giant. You see it when you watch the moving house vlog, when he is next to the movers disassembling shelves in the garage
I love how supportive you 2 are of each other. Keep up the smiles . Great job . I am a Carpenter and have developed an obsession with epoxy thanks to you guys . My wife has health issues so cant help much with projects but your guys channel gives me so many great ideas . Thank you guys so much .
I've had a couple squishy keyboards and trust me, the last thing you want is a keyboard with extra flex. It makes it feel super-cheap and is much harder to type quickly.
I would have tested white letters on the purple or used a cooler toned yellow but overall great episode. The effort you put in is commendable. Expensive keyboard! Would watch more of this if you wanted to do it again. 😊 glow in the dark....glitter!
@@artyb27 Which was a joke? As in not necessarily true? I'm pretty sure that they have people edit the gaming videos, but she still edits the maker videos.
Here'a an idea: You could make a mould of bottom sides of all the keycaps at once, so you could just pour a slab of resin with already built-in stems. It would allow you to make a design that's uniform across whole keyboard (like galaxy, for example). Then you just cut out individual keys on the cnc and have whole set in one go.
4:22 Katelyn zoning out staring blankly into the camera while Evan is doing important resin stuff and doesn't notice *anything* out of order is like my 2 braincells trying to get me through exams
Looks awesome! For the new pressure pot, I would call him Hugo because he is huge and now that he is lived he is ready to go. Lol. Also now that you have keys with the symbols engraved you can make molds of those so you don’t have to redo the engraving if you make more.
I love that the colors went from matching the trans and bi flag, to matching the trans and pan flag. I know it's probably unintentional, but it still brings me joy.
I thought maybe the purple with white letters would have looked nice as well. But the color combination you guys decided on was also very nice~ I love the led lights on the keyboard! Maybe Barry for the new boy?
The wooden keyboard is by far my favorite still (it was just too perfect), but this one turned out great. The letters really elevated the whole design. Looks like candy
I know they said they don’t want to make another one, but look at it this way! The next one will be so much easier! You have all the molds already, and you now know the best practice for all the keys with how much you learned!
I really love how creative the editing is in your videos. You both are so creative and make beautiful projects while documenting the process and turning those assets into incredibly entertaining videos. I can’t imagine how many extra hours of work the full edit of your videos add on to the total project time. Creating the product, documenting it, and editing it looks like an incredible amount of work - but the end result is so fun and creative. These videos are packed with so much personality and charm. I’m sooo impressed with your videos! You both absolutely deserve all of the success you’ve achieved.
Yeah pastel lavender was what I expected them to say when the purple was too dark and then they made yellow and now all I see is giant pieces of corn 🌽 😅 nice corn but still corn
Love the keyboard! The hard work and passion y’all put into your projects really shows! As far as the the new big pressure guy, why not keep with the Tangled theme and name him Maximus?
Next time on E&K: today we're making a giant resin mood ring wooden velvet custom key keyboard made out of world's smallest keyboards! (Your keyboard obsession is amazing entertainment, and I love your enthusiasm. Hope you have a great day!)
I love how this turned out, but am I the only one who noticed that with the up, down, left & right pawprint keys, the key that was meant to point right was pointing down. Still absolutely amazing stuff Evan & Katelyn 👏👏
The space bar would have been so cute if it was like a cat with a dotted line behind it showing it was jumping cx Also name the big pressure cooker Pedro because then you can have Pedro and Pascal!
I love that they made this full resin. Seeing the title i thought they were gonna go into utter chaos like last time. But i can say im thoroughly impressed. Chaos keyboard for chaos couple❤
Looks great. For off colored keys where you can’t use a matching color, as it wouldn’t stand out. They can be done with silver for the lettering, making them stand out in more than one way from the normal keys.
I love and respect you guys putting so much beautiful technical work into something.... and then immediately being okay about not convincing yourselves you now have to make more and sell them. Maybe that's just where my brain went because... I would buy the hell out of them. But my need to turn every hobby into some kind of income is problematic. You're both heroes in my mind.
I'm sorry yall were stressing to finish but I love that you took the time to engrave the letters and symbols it looks much more like a finished keyboard
Since the little pressure pot is Pascal, maybe his bigger buddy is named “Newton” (as in Newtons per sq. meter - an older way of measuring pressure)! Of course you could also name him PSI (pounds per sq. inch) but that just makes me think of Gangnam style’s Psy. :D
28:25 Love how it ended up with super cute primary colors. But, I think the pawprint right arrow key is facing the wrong way. It's facing down instead of to the right.
I was recently re-watching some of my fave old E&K videos, including the resin key-cap videos, and was hoping you guys didn't forget the idea of doing a full resin keyboard! This is so legit!
If you want to match pigment colours between two pours, you could pigment the resin _before_ adding hardener, then only use as much pigmented resin as you need for each pour 😊 it'd save you having to be so precise and everything.
Just watching this, when you guys mentioned about the silicone pore looks like chocolate. I though it would be fun to see you guys make a chocolate keyboard and then you can eat it once complete. Science and treats 🎉❤
I think having all the meta/non-alphanumeric keys be blank would be a cool and totally valid aesthetic choice, especially with the dark purple color fwiw! Their sizes and positions help you remember what they are IMO (as someone who occasionally uses a legend-less keyboard..)
This is so tame compared to what I was imagining, I was expecting total chaos resin keyboard😂 maybe chaos keyboard next??? I loved the filled key caps they were so cool.
love how this turned out! also, big appreciation for the leveling jigs & the trays for the pressure pots. I suggest big pots name should be Big Boss, because he is a Big Boss :)
Love the video! The keyboard looks so good. A name suggestion for the new pressure pot could be "Chonk" or "Potato" cause it's so big in size. I always love your videos! Also a chocolate keyboard sounds delicious 😋
I love this so much! Doing the pearl-ex was good, but I think doing either a solid color (like alcohol inks) or making it matte could look even sicker. Thanks for the content
Don’t miss out on our “Make, Fail, Have A Nice Day” limited merch drop! Designs only available til June 16th shopevanandkatelyn.com/
Cool
Right when I get paid~ 💸💸💸
I wish I could damn
So excited!
Name the big boy trevor!
I love how Evan just stands and looks at katelyn with pure love and joy in his eyes.
Such a golden retriever 🥹🥰
@@ChloeFrench omww yessss and shes the joob😭❣️
Relationship goals 😸
It’s cause they don’t have kids yet and are self employed lol. Plz believe this and plan ur future accordingly
@@butwhytho4858 It's literally just because they love eachother. I'm sure he looked at her that way when they weren't self-employed too.
They’ve made a mood ring keyboard, a velvet keyboard, a wooden keyboard, and now finally a resin keyboard. Now, all that’s left is to make one out of soap.
nothing's impossible
And then an all wax keyboard. Mountain Dew and Hot Cheeto scented wax for that pre-packaged gamer smell.
@@rambbler a candle keyboard
1. Soap keyboard
2. Candle keyboard
3. Chocolate keyboard?
@@sriramjambunathan4494 human keyboard
It's ridiculous how much joy it brings me to see two people I've never met owning a new pressure pot. 😂😂😂
3:08 katelyn being genuinely excited Evan remembered the difference is so cute
@@emmetthowell899 wow
"Pascal needed some lube his first time, too." I was legit mid-bite of food and nearly choked laughing! 😂 Y'all are fab, love this.
Was a very confused Man, when i heard my Name and the Statement i needed lube 😅
I lowkey would love seeing just a straight up clear resin keyboard where you can see all the little electronics through, it would look sick imo
They exist
Atomic purple key board.
That puts images in my head of the clear electronics from the 90s to early 2000s, like the clear gameboys and controllers.
Oh hell yeah y2k aesthetic
Then you'd be allowed to use it in prison.
I think Millie (short for Millibar) would be a great companion name for Pascal. Especially since the ratio of millibar to pascal is fitting for the sizes of the pressure pots.
Or Torry (Torricelli), for same reason (as 1 torr ≈ 133 Pa)
+
I like Millie!
Millie or Barbara was what i was thinking. Glad to see somebody else on the same wavelength. 😄
I thought Barye. (1Ba=0.1Pa) but I thought it as more of a comedic note to the name, like how Tiny or Little John is used for big dudes.
During Evans explanation about the different profiles of key types she looks at him with the look" oh yes I love my nerd!!! " 😅🤣❤
I need a complication of Katelyn 's reactions everytime Evan reveals the price of the items for the project 😂
FINALLY the ultimate Evan and Katelyn keyboard....RESIIIINNNN 🎉❤
it had to happen!
resin time dance not included
Please make a pink themed one!
@@linuxstreamer8910 NOOOOO
THE ULTIMATE FORM!!
Katelyn is determined to make this “that kind of channel” 😂
mwahahahaha
They don’t even deny it anymore smh they are that type of channel haha
that was dark katekyn after all
Honestly, wouldnt even be against it bc of the comedy level of their content.
@@EvanAndKatelyn That's also what I subscribed for! 🤝 Love how espontaneously it comes out!
21:17 their pure joy in this moment solidifies them as my favorite RUclipsrs and them both checking their hands at 24:01 before they high-five
I would suggest the new pressure pot be called Barye (Barry) to keep in theme with Pascal as a unit of measure for pressure. Barye is the CGS standard unit equal to 0.1 pascals, so there is an inverse proportional relation between the pressure pots, but that's because nothing can compare to the original.
And 1 bar is 10^5 pascals so it keeps with the fact that he's bigger!!
Did anyone else notice the right paw print was facing down? It all looks so amazing.
Yeah i was about to comment on that
Good catch
Yup, was just about to type it but wanted to check other comments first xD
About to mention that too
Yea
Dear Evan & Katelyn!
Me as a guy who likes glowsticks, I had to figure out a way to have rechargable ones. I found super great ideas on the internet and I had my own toughts as well. I made a few one(using resin) and it turned out pretty well. If you guys would like to make a project that only require a few days, I have the best idea for you! I will tell you the ideas later, 'cause I assume you won't see this.
Have a wonderfull week, best wishes!
David
(Thanks guys for likes and comments!! I hope we can reach E and K to do thissss!!!)
reusable glow sticks , biiiig
That would be sooooo cool
Reusable glow sticks would be a good project
Yesss this is perfect
The “resin time, resin time! Du du du du!” Really gives me happy vibes lol
"It only cost $569.87"
The look on Katelyn's face, priceless!
Priceless? I'd say her face cost them $569,87 😂
@@marekvojta9648lol
Katelyn with the camera: very productive, filming the keyboard nicely
Evan: filming how short Katelyn is
This made me giggle out loud. Nice.
Very true😂😂😂
Based on collabs with other RUclipsrs, I don’t even think Katelyn is particularly petite. I think Evan is just unbelievably tall. That’s why he always has back problems, poor guy.
@@MeredithHagan I think Evan is around 6'5 (maybe it was 6'7, I can't remember)? And Katelyn was around 5'7 or something. In their mixing all their resin pigments video I believe, they have their heights displayed at one point
@@redbengal16 Evan is 6'5" and Katelyn is 5'6". She's actually pretty average, but Evan is a giant. You see it when you watch the moving house vlog, when he is next to the movers disassembling shelves in the garage
I absolutely loved when you made the "space" space bar key. Like I feel like you should make a full key board set of space and galaxy themed
I have to admit, i was initially disappointed when they showed the mock up and it wasn’t space themed. /Still love the results though!
@@Kelsylynn fr
Ooh! With a rocket ship for the escape key!
@@BethB2010 omg that's so clever
@@BethB2010 yas! and a black hole (glow in the dark donut!, there Evan's GitD) on "enter" the earth on "backspace"
I love how supportive you 2 are of each other. Keep up the smiles . Great job . I am a Carpenter and have developed an obsession with epoxy thanks to you guys . My wife has health issues so cant help much with projects but your guys channel gives me so many great ideas . Thank you guys so much .
You guys should make a silicone keyboard now! I think it would be interesting because silicone is squishy. :)
I saw silicone keycaps once
I have a silicone keyboard
I've had a couple squishy keyboards and trust me, the last thing you want is a keyboard with extra flex. It makes it feel super-cheap and is much harder to type quickly.
Revenge of the ZX Spectrum
AWESOME
The whole silicon bit was so satisfying! I wasn't expecting all that E&K after dark section lol
haha we weren't expecting it either. that's what happens when we film while tired
My favorite part of an E&K video is when they say “it’s resin time” and resin all over the place.
LOL
surprisingly accurate
I turned their resin time song into my notifications tone on my phone.
I can hear the song just reading the title 😆
haha, i'm honestly surprised I've never seen someone make this joke.
I would have tested white letters on the purple or used a cooler toned yellow but overall great episode. The effort you put in is commendable. Expensive keyboard! Would watch more of this if you wanted to do it again. 😊 glow in the dark....glitter!
you know, if they do a galaxy keyboard they could do glitter AND GitD AND even use the old purple ones (with white paint should work fine)
This looks so pretty! ❤❤❤
I think a dark version with light letters would look awesome as well! Like a whole Galaxy or something ❤
that would be super cool!
Yes agree galaxy would be dope
Yah they kind of over thought the recasting of the purple keys, they could have just done light detailing on them lol
@@EvanAndKatelyn Evan could even get his glow in the dark and glitter then....
Adding the letters was absolutely the right choice, they look amazing! Also, the after dark content was *chefs kiss* fantastic.
The fact that Katlyn actually tracked evan hand at 3:00 to create the concave shape makes me feel she puts so much effort in editing the video.
I don't believe she edits these videos anymore. I could be wrong tho.
Yeah pretty sure they've outsourced now
@@swimseven77 yeah they made a joke around 24:00 about the poor editor
@@artyb27 Which was a joke? As in not necessarily true? I'm pretty sure that they have people edit the gaming videos, but she still edits the maker videos.
Ypu two are so 'real' and 'authentic' this is why i love you two so much! you show the grit and the toil that goes into it
Here'a an idea: You could make a mould of bottom sides of all the keycaps at once, so you could just pour a slab of resin with already built-in stems. It would allow you to make a design that's uniform across whole keyboard (like galaxy, for example). Then you just cut out individual keys on the cnc and have whole set in one go.
+1
Want galaxy! Would be such a cool keyboard. Light shine thru to look like stars?
I was about to say the same thing! Kinda like how dice molds can have the numbers already on the different faces with the mould
4:22 Katelyn zoning out staring blankly into the camera while Evan is doing important resin stuff and doesn't notice *anything* out of order is like my 2 braincells trying to get me through exams
Looks awesome! For the new pressure pot, I would call him Hugo because he is huge and now that he is lived he is ready to go. Lol. Also now that you have keys with the symbols engraved you can make molds of those so you don’t have to redo the engraving if you make more.
Not bad. I was thinking "Kilo", because KPa (kilo-pascals) would be the next unit of pressure up from it's little brother. :P
I love the idea of naming him Hugo! So cute!
I love that the colors went from matching the trans and bi flag, to matching the trans and pan flag. I know it's probably unintentional, but it still brings me joy.
honestly the last few months/year yall's comedic editing has been not only great but also noticeably getting better over time, loving it
I thought maybe the purple with white letters would have looked nice as well. But the color combination you guys decided on was also very nice~
I love the led lights on the keyboard!
Maybe Barry for the new boy?
I'm with you. Rather than remaking, I probably would have done white on purple too
@@karl_alan yea would have contrasted well
The wooden keyboard is by far my favorite still (it was just too perfect), but this one turned out great. The letters really elevated the whole design. Looks like candy
I know they said they don’t want to make another one, but look at it this way! The next one will be so much easier! You have all the molds already, and you now know the best practice for all the keys with how much you learned!
E+K: "We don't have time! This project is already taking too long."
Also E+K, at 27:50: "Let's do stop motion"
😂
Yes! They finally have everything they need to make a keyboard out of chocolate!
😇
I was just thinking that they should make one out of chocolate!
CHOCOLATE KEYBOARD! 🍫
Just don't use the same molds! Molds used for resin are not food safe anymore 😅
Yes! I had the same thought when pouring the silicone !
Evan and Katelyn are the definition of choas vs order and I’m here for it
when Evan and Katelyn started to do the cute icons i instantly thought they were going to do a Joobie space bar
I was a bit bummed when the purple was switched but i love the primary color scheme, the board looks so great!!! Plus the lil skull? Adorable!!!
The pansexuals are coming
I really love how creative the editing is in your videos. You both are so creative and make beautiful projects while documenting the process and turning those assets into incredibly entertaining videos. I can’t imagine how many extra hours of work the full edit of your videos add on to the total project time. Creating the product, documenting it, and editing it looks like an incredible amount of work - but the end result is so fun and creative. These videos are packed with so much personality and charm. I’m sooo impressed with your videos! You both absolutely deserve all of the success you’ve achieved.
❤❤
'It works! It's a functional keyboard and it's made of resin!' 😍💙 LOVE love this project! Thanks for bringing us along!
thanks for always being involved in our crazy resin ideas!
@@EvanAndKatelyn 21:47 Evan Jr? Big Ben? Sully (Monsters Inc. reference 😂)?
It's so cool to see someone using and having a CNC Machine, since I'm studying about it in school
omg re-doing the keys was the move! I love how the yellow goes w the other colors and the little symbols are ADORABLE
i kinda liked the purple ones more but it still works
i love the yellow but i feel like a lavender would have looked sooooo cool 🥺
Yeah pastel lavender was what I expected them to say when the purple was too dark and then they made yellow and now all I see is giant pieces of corn 🌽 😅 nice corn but still corn
@@JLoDucky i can't unsee it 😭
@@cherry_mary815 😂 I’m sorry
Kinda love Katelyn going all in on the adult jokes😂
Dark Katelyn after dark 😂
22:34-23:54 is why we try to shut our desktop computers as the parents walk in.
Love the keyboard! The hard work and passion y’all put into your projects really shows!
As far as the the new big pressure guy, why not keep with the Tangled theme and name him Maximus?
That’s what I was thinking for the name
I think purple with white lettering would have also worked well ^^
That's what I was thinking too, but I can't argue choice to go with the custom designs because of it.
YES that was what I thought too. Oh well...
Next time on E&K: today we're making a giant resin mood ring wooden velvet custom key keyboard made out of world's smallest keyboards!
(Your keyboard obsession is amazing entertainment, and I love your enthusiasm. Hope you have a great day!)
I love how this turned out, but am I the only one who noticed that with the up, down, left & right pawprint keys, the key that was meant to point right was pointing down. Still absolutely amazing stuff Evan & Katelyn 👏👏
The space bar would have been so cute if it was like a cat with a dotted line behind it showing it was jumping cx
Also name the big pressure cooker Pedro because then you can have Pedro and Pascal!
You should name the new pressure pot Fibonacci!
Also Evan and Katelyn after dark might be my new favorite thing. 😂
I was thinking Freddie or Bowie after the song Under Pressure
Yall could totally sell the extra "test" keys on your site, and fans could add them to their own keyboards even if they are a little janky 😁
You two are so great together. I'm a Weeb married to a Nerd, and we love it.
Katelyns reaction at the price was PRICELESS!!! Poor Katelyn to busy editing the videos to keep an eye on Even XD
I love that they made this full resin. Seeing the title i thought they were gonna go into utter chaos like last time. But i can say im thoroughly impressed. Chaos keyboard for chaos couple❤
Looks great.
For off colored keys where you can’t use a matching color, as it wouldn’t stand out. They can be done with silver for the lettering, making them stand out in more than one way from the normal keys.
I love and respect you guys putting so much beautiful technical work into something.... and then immediately being okay about not convincing yourselves you now have to make more and sell them. Maybe that's just where my brain went because... I would buy the hell out of them. But my need to turn every hobby into some kind of income is problematic. You're both heroes in my mind.
Love these videos. Their ability to mix the technical, scientific and their happy and bubbly personalities into their videos is second to none. 😊
Love the keyboard. Would also love to see a completely transparent keyboard that use the LEDs to color the specific keys
You should call the new pressure pot Freddy Mer-cure-y. Because he's "Under Pressure"
I literally came here to say this ☺️
I'm sorry yall were stressing to finish but I love that you took the time to engrave the letters and symbols it looks much more like a finished keyboard
I love the way Evan and Katelyn do sponsorships
Evan:it only costed $569.87
Katelyn:😳
Also Evan:i also spent an extra $300 on molds 😂
Edit: thank you everyone for the likes
don't remind me...
@@EvanAndKatelyn 🤣🤣 remember its an investment:)
$MOLD 📈 🚀🌙
@@ShadowBeats1 yet they don't want to make another one XDDD
Yes….yes it is 23:32 it is EXACTLY what I signed up for. Evan & Katelyn After Dark 😂😂😂😂
The stop motion at 27:44 was amazing! I can’t imagine how long these projects take 😮
You guys are such an amazing channel! And it only seems fit that you have an entire keyboard of resin to go with your collection lol!
Since the little pressure pot is Pascal, maybe his bigger buddy is named “Newton” (as in Newtons per sq. meter - an older way of measuring pressure)!
Of course you could also name him PSI (pounds per sq. inch) but that just makes me think of Gangnam style’s Psy. :D
28:25 Love how it ended up with super cute primary colors. But, I think the pawprint right arrow key is facing the wrong way. It's facing down instead of to the right.
I'm sooo glad someone mentioned it. It made my OCD go nuts, lol
I was recently re-watching some of my fave old E&K videos, including the resin key-cap videos, and was hoping you guys didn't forget the idea of doing a full resin keyboard! This is so legit!
Out of nowhere Evan: "you know Pascal needed some lube his first time too" 22:55
*me* : dying of laughter
I LOVE bubbling of the resin at 21:05 it was so good and in my opinion it was so satisfying.
If you want to match pigment colours between two pours, you could pigment the resin _before_ adding hardener, then only use as much pigmented resin as you need for each pour 😊 it'd save you having to be so precise and everything.
They regularly forget to level things and add mold release. I don't think they have that sort of foresight 😂
@@balentay Did you see all the Photoshop mockups they did? They have an extreme amount of foresight!
(Then they totally forget about it XD)
Just watching this, when you guys mentioned about the silicone pore looks like chocolate. I though it would be fun to see you guys make a chocolate keyboard and then you can eat it once complete. Science and treats 🎉❤
Went and bought the new merch as soon as I saw Katelyn's shirt!!!! Love it so much, such a good flip on the Make Fail shirt!!!
thank you for the support, so glad you like the new design!
Basically the pan flag plus white! I love it
You should also make a silicon wrist rest bar for the keyboard. The keyboard looks awesome.
Ok but surely a clear keyboard?
It all looks so amazing by the way!
Ben's Worx attaches a piece of tubing to his pressure pot when relieving pressure. Seem to make it much quieter!😊
I think having all the meta/non-alphanumeric keys be blank would be a cool and totally valid aesthetic choice, especially with the dark purple color fwiw! Their sizes and positions help you remember what they are IMO (as someone who occasionally uses a legend-less keyboard..)
dying at the editing! insane how much hard work you guys do. Also loved to see the cutting board you made Julien over at his channel :)
I'm really allergic to resin before it's cured. So it's nice to see cool resin projects that people can do
This is literally perfect timing for this to come out!!!
4:03 idk why I love this so much
This is so tame compared to what I was imagining, I was expecting total chaos resin keyboard😂 maybe chaos keyboard next??? I loved the filled key caps they were so cool.
Evan on a whole speil about how aesthetic the keys are
Katelyn:🧇
I feel like a high polished fully clear keyboard would look cool
I love these two, they’re adorable and very much relationship goals. 🥰
Holy crap! That is a TON of work! It looks very nice, and if you ever make another it should take much less time, but wow. Well done
The keyboard looks sooo good and vibrant❤. I would love to see you guys make a galaxy themed glow in the dark resin keyboard.
love how this turned out! also, big appreciation for the leveling jigs & the trays for the pressure pots. I suggest big pots name should be Big Boss, because he is a Big Boss :)
Finally! RESIN!!! I was going crazy!!!
IVE WAITED FOR THIS MOMENT
Love the video! The keyboard looks so good. A name suggestion for the new pressure pot could be "Chonk" or "Potato" cause it's so big in size. I always love your videos!
Also a chocolate keyboard sounds delicious 😋
I love this so much! Doing the pearl-ex was good, but I think doing either a solid color (like alcohol inks) or making it matte could look even sicker. Thanks for the content
Also the color white you were talking about is called pearl white/pearly white hope this helps😊
I love when y'all tell us the foreshadowing moments, lol. It actually makes me excited to see what going to happen next!!!