Could you do an add on video on how to setup flaperons once adding the extra servo? To a three position switch and to one of the dials. And also how Enrique in the comments said, how to disabl ethe Telemetry Alarm for the RSSI.
Thank you for this video. I purchase this Radio. I already coached 3 planes. Do to ring settings on my spectrum receiver. Safe and Ax3x have been spin in the neck.
Great video. Followed it to the tee. Gyros sense the angle changes, however no action on the control surfaces. TX16S Mk 2 and AR630 Rx. From what I gather something to do with forward programing. But I cant find any info on how to set it up. Any help will be very appreciated as this is my first RC experience.
Great instruction. I just ordered this radio and I know I’ll need lots of help. I have heard that the audio output on this radio (even on max setting) is not the greatest. Any thoughts on this?
You should disable the Telemetry Alarm for the RSSI, or you would get an alarm on the radio while flying due to the receiver fly-by (short range) telemetry transmission.
Great, I have a problem setting up my AeroScout with the AR631 RX. The elevator on CH2 isn't moving whereas all the other functions work with the TX16S Max. The AS3X and SAFE work on the ailerons and rudder but nothing on the elevator.
Great video, thanks guys! my TX16 arrives Saturday 😊 . I opted for the RM over a Spektrum radio. Can the throws be adjusted with a slider pot? And do you have a video on forward programing from the TX16S?
I have bound my Slow Ultra Stick with my TX16S using this video and now I get a “RF low” and “RF critical” warning. The aircraft can be right over my head and I get them. Generally around 100 feet and more away from me.
hi i own a extra 200 bnf with ar 631 receiver, when i bind without safe mode, the AS3x does not come on even after 25% throttle. I don't have any programming for it set up either
Hi. I'm trying to bind a RM r86c with my jumper 16 but the r86c doesn't Flash as it should. It flashes 1/sec. Is it not possible to run a r86c with just plus and minus from a Ni-Mh battery?
Have you guys set up the eflite carbon z cub on the radiomaster or the jumper radios ? been wanting to set it up but don't know how and haven't found a video on it . Especially setting up flaps is something that I have no clue how to . I have a jump t18pro
I can NOT get it to set the Safe. I’ve assigned it to different switches. I can’t get out of the SAFE low rates or get the AS3x to work. I’m using the radiomaster and trying to get an Eflight Eratix BNF. The AS3X is completely non responsive.
Love this video 👍 I don't have a Spectrum radio, only Jumper & Radiomaster. Can I bind a brand new Eflite Bind-and-Fly models to a OpenTX or EdgeTX radio ? Or do I need to initilize the model with a Spectrum radio first ?
Why not just buy the PNP version and your receiver, would even be cheaper than to go through all this stress of trying to program the spektrum receiver 🤨
I was planning to do that. But this version includes a good receiver with gyros, and the price is about the same as a PNP. Made more sense to use the spectrum receiver and do a little work to pair it with my radiomaster transmitter.
Find Value ??? U guys are just like all these other EXPERTs U set up a blank Model but failed BIG TIME to explain it. Not going to watch thru or subscribe because as a newbee i'm sure even slowing the playback to 50% U won't explain every step and I and others will be wasting our time.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Great video! I followed along exactly, and got my T-28 all ready to go. Thanks!
you guys are phenomenal.... i appreciate all the info! horizon hobby gave me the blow-off when i called them about this exact issue
Thanks for watching
not surprised they did, they want you to use spektrum Tx only.
Great video , did a whole lot for me in understanding my radio a little bit more , currently trying to bind to my aeroscout .
Trying to do the same but my elevator does not work well as well as one aleron
It's a good video on how to program open/edge tx
Could you do an add on video on how to setup flaperons once adding the extra servo? To a three position switch and to one of the dials.
And also how Enrique in the comments said, how to disabl ethe Telemetry Alarm for the RSSI.
Thank you for this video. I purchase this Radio. I already coached 3 planes. Do to ring settings on my spectrum receiver. Safe and Ax3x have been spin in the neck.
Great video. Followed it to the tee. Gyros sense the angle changes, however no action on the control surfaces. TX16S Mk 2 and AR630 Rx. From what I gather something to do with forward programing. But I cant find any info on how to set it up. Any help will be very appreciated as this is my first RC experience.
Great video, enjoyed it. Can make a video setting up a plane eflight 70mm viper from start to finish. Setting up landing gear and flaps.
great information!
Glad it was helpful!
Great instruction. I just ordered this radio and I know I’ll need lots of help. I have heard that the audio output on this radio (even on max setting) is not the greatest. Any thoughts on this?
Thanks for the info... what is the difference between this form verses Spektrum forwarding in tx16s?
You should disable the Telemetry Alarm for the RSSI, or you would get an alarm on the radio while flying due to the receiver fly-by (short range) telemetry transmission.
Thank you, I'll be doing that!
@EnriquelvanHoward how do you do that?, I have a Radiomaster TX16S
Hi, would you know the radio setting for Arrows Bigfoot to bind from? I’m having trouble DMS or LRS etc. thanks for video, well done.
Can i bind radiomaster boxer to any kind of model ? Planes helicopters quads delta wing etc ? Or should i buy tx 16s mk2 for multi purpose ?
Great, I have a problem setting up my AeroScout with the AR631 RX. The elevator on CH2 isn't moving whereas all the other functions work with the TX16S Max. The AS3X and SAFE work on the ailerons and rudder but nothing on the elevator.
Great video, thanks guys! my TX16 arrives Saturday 😊 . I opted for the RM over a Spektrum radio. Can the throws be adjusted with a slider pot? And do you have a video on forward programing from the TX16S?
So when you set up Safe Select on channel 5, why did you do it in Mixes. Why not Input or why not output tabs.
hellow guys...can the ultra slow stick handle 4s battery ???????????
can I bind my jumper t16 pro to this plane or the DMSX -AS3X Im pretty sure I can but Im at work an cant check
is there any way that you could make a video updating forward programming.
I have bound my Slow Ultra Stick with my TX16S using this video and now I get a “RF low” and “RF critical” warning. The aircraft can be right over my head and I get them. Generally around 100 feet and more away from me.
hi i own a extra 200 bnf with ar 631 receiver, when i bind without safe mode, the AS3x does not come on even after 25% throttle. I don't have any programming for it set up either
Hi. I'm trying to bind a RM r86c with my jumper 16 but the r86c doesn't Flash as it should. It flashes 1/sec. Is it not possible to run a r86c with just plus and minus from a Ni-Mh battery?
Have you guys set up the eflite carbon z cub on the radiomaster or the jumper radios ? been wanting to set it up but don't know how and haven't found a video on it . Especially setting up flaps is something that I have no clue how to . I have a jump t18pro
I can NOT get it to set the Safe. I’ve assigned it to different switches. I can’t get out of the SAFE low rates or get the AS3x to work. I’m using the radiomaster and trying to get an Eflight Eratix BNF. The AS3X is completely non responsive.
Love this video 👍 I don't have a Spectrum radio, only Jumper & Radiomaster. Can I bind a brand new Eflite Bind-and-Fly models to a OpenTX or EdgeTX radio ? Or do I need to initilize the model with a Spectrum radio first ?
Yes you can! Thats what we did in this video.
@@graysonhobby Thanks for getting back to me, I wasn't sure if you tried it with a Spectrum radio first 😉
Is that running open tx or edge tx?
Mine has open Tx....
I can't get Edge tx on my radio
Sure you can
@@Mikeylikesit1968 I've tried won't upgrade
@@DrDiff952 What transmitter do you have
In this video, the RadioMaster TX16 is using EDGE TX
I always put a zero throttle curve on a switch. It's too easy to accidentally bump the throttle cut switch
My throttle cut is on 2 of the 6 buttons on the transmitter. Can't bump that
😢😢😢😢😢please help me talking about jumper t16 it doesn't turn on i don't know what to do
Sorry, meant to say DSM Fowarding v0.53..
Bro just tell me where the hell the channels are.
Why not just buy the PNP version and your receiver, would even be cheaper than to go through all this stress of trying to program the spektrum receiver 🤨
I was planning to do that. But this version includes a good receiver with gyros, and the price is about the same as a PNP. Made more sense to use the spectrum receiver and do a little work to pair it with my radiomaster transmitter.
Find Value ??? U guys are just like all these other EXPERTs U set up a blank Model but failed BIG TIME to explain it. Not going to watch thru or subscribe because as a newbee i'm sure even slowing the playback to 50% U won't explain every step and I and others will be wasting our time.