Setting up FlySky Radio for Airplanes | Dual Rate | Expo | Landing Gear
HTML-код
- Опубликовано: 26 апр 2017
- If you are new to quads AND airplanes, the FlySky Transmitter is arguable the best 'entry' radio on the market. What makes it so appealing is this FlySky Radio is PACKED full of features for both quads, drones, and Airplanes.
Please support our shop any purchase even a pack of props helps us out.
Shop Grayson Hobby
graysonhobby.com/
If you like this video, be sure to give us a Thumbs up!
Please support our shop any purchase even a pack of props helps us out.
1) SUBSCRIBE to learn how to update your hobby gear and hear the latest reviews on products we carry - Remember we do not carry the junk - it must pass our confidence test!
-- goo.gl/RhTL1H
Drones We Tested and APPROVE
graysonhobby.com/kingkong-4s-...
Airplane We Tested and APPROVE
graysonhobby.com/dynam-rc-haw...
4) LET'S CONNECT
-- / graysonhobby
-- / 777685892400599
-- / graysonhobby
Come Visit our Brick and Mortar FPV & Hobby Shop - Touch and Feel before you purchase!
GraysonHobby
220 Old Loganville Road
Loganville, GA 30052 - USA
Tel (678-682-9123)
#flysky #fpvairplane #fs-16 
Наука
i like the way these guys preach safety. I know people get tired of hearing about it and you don't read or hear about prop accidents, perhaps everyone is just lucky or they do indeed practice safe habits around the world. But I do not mind at all that they preach it, it's really awesome that they do.
Thank You
Finally...A perfect demo of how to set up and use Throttle Hold for a Newbie! Thank you guys for this valuable safety lesson with all the visual steps.
ALSO! A current owner of this radio here. Please make sure you don't hit and hold "save/cancel" while on the Display page. It will move and cycle everything. Including your throttle. I've had it catch me almost twice now. Just be mindful of it and it's a great radio. Use it in my Avanti S V2 currently
nice!! --Thanks Gents!! ...still learning ALOT, FLYSKY is what im starting with!! Keep up the Great Work!! THANKS AGAIN WILL, YOU ARE THE MAN!!!
Great video! You explain very clearly and naturally; exactly what I needed.
I've just bought one of these and this is such valuable information. Thanks. guys
You guys are awesome. Most of my RC knowledge has come from your videos which are really informative and easy to follow along. You guys are among the top level youtube trainers on this subject. Thanks for for all your videos.
Thank you demoing this transmitter. I am getting into the rc flying and i have decided to start out with this transmitter. This video was very helpful and sure will be back to reference it once i get going with setup.
Thank you guys for all your great videos. I really need them.
I have the FS-I6X transmitter and it's great. It's even capable of receiving rssi from the better flysky receivers (ia6b,x6b), I use it to find lost models (on rare occasion). Great range too.
I have had the FlySky FS-T6 for about 5 years and it has never failed my on my collection of fixed wing. much better then spectrum lower lever stuff and the range is MUCH longer
I also have the FS-T6...
I got it used, all I could afford. Glad to hear that it's good!
I still can't figure out how to do Channel Mixing. 😳
I want to add a little up Elevator mixed with Ailerons, for a little automatic Bank and Yank.
Thank you for this very informativ contents .
I love you, I could not find any video, I am new to this, so I looked at how you connected everything and it worked just like you said, my plane now works, they are the best
Thanks a lot for the video guys.understood how to change the settings for every plane👍👍
Really nice explain and presentations. Appreciate it 👍
Great video, very informative, thank you.
Both FlySky FS-i6 and the FS-i6X can be updated to 10 channel, with a firmware update through usb from a pc, the soft ware is free.
Do you know where (website) and how to change the firmware to a 10 channel?
Stank you so much for the info, I used to build mine with balsa and monocote about 44 years ago while n the Air Force. My radio was a futaba and fortunatly wheel and dealing got it in a swap and to fix it and a servo was about $50. I had a piper cub and a P-51 mustang with 6' wing span. The gas motors were tricky as they would snap bank and pop your finger, wow it hurt. Being retired cuts budget way down and had to get rid of all of it years ago as children were more important but it's ok. Love the hobby., I have a Horizon Hobby Sport Cub S with safe technology which blows me away. I love the as I call it the oh crap button. Thanks again guys!
Excellent video for beginners.
Great thank you for going to all details I appreciate it
now i can fly my planes with your helpful instruction.
Thanks for the great video
Hey Kevin, thanks so much for the kind comments and thanks for watching! --B
Thanks guys! i was just trying to figure it out for my son to fly a trainer...i hope i can get some more stuff from you guys later this summer. (jeff v)
Thank you guys!
Thank you guys very helpful
Thanks for doing this video. I can find lots about planes and spectrum receivers. And some about drones and flysky. But there really isn't much on the tube for planes and this radio. It's like it was tailor made to answer all my questions about setting up my first radio and plane. Bookmarking this video and your store.
Glad this video could help, glad you enjoyed it thanks for the support
Thanks guys, learn something new again. I'm starting to switch on rc planes (I am a drone guy) but it just too many nice ones out there.
U guys are awesome.. Love from India.. 😋
great video guys ...well done ....i have that radio which is one off the best.
just got one, it does wot it says on the tin, good bit of kit, managed to get it to work, I am a beginner at this,
Thank you, this video helped a lot!
Glad it helped!
EXCELLENT ADVICE BEST LISTEN
very good video, very helpfull too
Working on setting mine up. One suggestion (yes, I bench tested with the prop on and I’m glad you mentioned taking the prop off) when my radio boots and plane is plugged in the transmitter displays a message to move all switches to the up position. I am reversing my throttle idle switch so that up is off.
Great video! I learned at least two things I did wrong.
Great video. Thank you. Liked and subbed!
yooo thanks so much i have been getting rtf planes and wasting money but i’m gonna get the flysky transmitter THANK YOU
Thanks for the video - I am trying to set up the three way switch ('C') , but cannot get any info on how to do it.
this video help me alot flysky work pog
thanks for the video its help for me RC truck 1/14 too thanks a lot
can you guys make a vid on changing the falcons arming from yaw left/right to the switches?
You guy are awesome, I'm just getting into the hobby I just purchased the the fms Kingfisher & the flysky fs-i6 transmitter & the fs-ia6b receiver and want to hook up the so that I do t crash it first thing. Hope you can help me out thanks
I love Flysky , I have the i10 but also had the 6ch as well and is a solid radio. I found it better then Spektrum . Easy to use and it just works .
Hey Mike, Thanks for watching. We are receiving tons of positive feedback from the FlySky as well. It has more features than most higher end Transmitters for waaay less $$. Do you use your FlySky For Airplanes or Quads?
I use mine for planes , I fly mostly warbirds
Great video guys - thanks. The I6x is a great budget radio. Have you done a video on adding a Gyro to a budget receiver such as the IA6B? How to add and wire etc? Would be helpful to a lot of people!
Thanks for the awesome tutorial on the transmitter setup. After a 26 year hiatus from the hobby I'm looking to start flying RC planes again. My old Futaba radios are no longer relevant in today's high tech world so I'm considering this radio to get going again. Could you please recommend reliable servos that would stand up to a .45 glow engine powered aircraft? Will this receiver also take the vibration produced from a glow engine? Thank you!
With mixes I was able to set up 3 position flaps with this radio
very cool.
When plugging in the receiver wires, are they labeled? How to tell which is which? Very good video. Thanks
thanks
Qué bueno que tiene subtítulos! 🇲🇽👏🏻
So...keep the props on, got it.
No off lol
Can 6 channel flysky transmitter 'without update in 10ch'' bind with 10channel flysky
reciver
What servos/esc/motor can I use the fs-i6 + ia6b with?
The higher the Expo, the softer the throw on the stick, or vice versa?
Who makes that plane with the retracts? I love that!
Just recieved my radio hooked it all up and when I pull back on the elevator at 3/4 it gives me full left alerons? Bad radio? Hooked up rudder to ch 1 and same thing.
I have mds 40 engine Can me guide me how to setup engine cutoff on my transmitter i have flysky as well
So I can use this to fly airplanes and helicopters as well??
How do you hook up the fms reflex to the fly sky 6 channel receiver
Gyro setup on this radio for helicopters? Thanks
I'm confused if -expo or +expo is used for i6x? I've seen some videos of the i6 with -expo
I'm setting up the ix6 for my skytrainer , should it be in PPM, or PWM ?
What kind of battery are you using for binding and for flying?
Have you a similar video with gyro set-up please?
I have a question about the Fly Sky FS-i6. The firmware is 1.1 27-mar-2015. Should this be upgraded? Thanks
i think ur video did not show how to bind bettry but bind the hold plane that kind cool
Can you use flysky transmitter and receivers in any plane ? Arrows p 51 , and t 28 , apprentice 1.5 , pt 18 , FMS has flysky and reflex in it ?
Doesn't a softer expo on FlySky have to be negative in the expo for a softer stick in the center?
I started making a boat for fishing and I bought this flysky fs i6x 10 ch and I do not know how to make it work with 5 engines of which 2 are for steering, 2 to throw bait (lifting, lowering) and one of throwing bait by spinning
How do I set up a total of five channels I have two ailerons and two elevators in the back. I got the throttle on Channel 3 on the receiver and it works properly but none of the ailerons or elevators work... I've got the eachine F-16
Can this radio bind to planes without installing the receiver in the plane?
how do I slow down the flap servos
There is a mode called idle mode in assign switches menu . You should use that for kill switch not the throttle hold one .
Yep, a MUCH better idea. See "Andrew Newton" on RUclips for how to set it up.
How often do you have to bind
olá,sou iniciante no hobby...qual a diferença entre o FS i6x e FS T6? obrigado.
Dual rate how do you set it as I am setting them and it goes back to 100% ???
hi i just got viper jet i dont know if it work for flysky radio are not i hope it work for it i dont no if it crash it i hate to see this got burn to going down
I bought the fs-i6X and my son factory reset it now it only has 6 channels, my question is there a way to get it back to 10ch again?? Please, thanks
Why can't i bind more than one receive with my FSI6X?
Can this transmitter be used for helicopter
don't you supost to bind battry first befor plug in??
im so confused how is receiver getting power?
I don't fly plans anymore, just quads nowadays. But this is a very good tutorial.
Thanks for the feedback! We are hearing from a lot of 'quad' guys they want to get into FPV airplanes. So dont hang up your fixed wing just yet :) -B
i bind battry first befor i bind everything else some how not work for me only work on ESC not work any other plug in
I’m really new to this hobby, And I find it difficult to add flaps. Could you maybe help?
I need help! I have a Flysky I6X transmitter to control my tracked inspection bot. But when I first switch the transmitter on, it beeps and gives me this message: "!!WARNING!! Place all switches in their up position and lower the throttle" Sometimes I just bump my left toggle switch, channel 3, and it stops the warning and gives me full control. But all too often, it doesn't matter how many switches and toggles I move around, it just keeps beeping and will not give me control. What is it doing and how do I get it to stop? I have a simple tank chassis with a light and camera gimble on it. It's not like I need a safety switch to start with. Can you help me?
Are you guys in Georgia
which channel on reciever do you plug in the battery when battery has small 3 wire stadard hittec style connector when you have a gas plane. and what do i set PWM or PPPM and i bus or s bus. Im running individual servo connections..and a standard servo for gas throttle.Thanks
For "individual servo connections" use PWM. Battery can supply 6v to ANY of the PWM output +/- pins - they are each connected as a bus rail.
Good infromations but too late for me i just cut my finger yesterday calibrating ESC with 11x6 propeller installed.
Two comments I am going to make here. Calling this an entry level radio would suggest one needs to upgrade it. Can you say why I should upgrade if I have one? 2) Why is it that nowadays guys on rc channels about flying refuse to mention rc helicopters? Its usually said..'' on your drones, multi rotors, planes or whatever..."'
And yes, I have one of these radios, and yes I have helicopters:)
Hi guys, very helpful video, I still have one question. My ESC/motor is bidirectional, so if I want no throttle, I have to position the left stick exactly in the center. Is there a way to make the motor spin only one way, or a way to adjust it in the settings so that I have the full range of control over only one direction? I don't want my plane's prop spinning backwards during flight :)
should be counter clockwise, but its either from the cockpit seat or from in front looking tail. i'm going to go eat some fresh crab now.
you look like Silent Bob (Kevin Smith)!
Don’t forget helicopters, use it on all my helicopters from 450- 600 size with no problems for years. If you can get the 10ch if not there is a mod to make the 6 into 10.
Guys I have the FlySky FS-i6X Transmitter and FS-X6B 6 Channel 2.4GHz Receiver can I use it with my Blade 130s rc helicopter and how can i get it to work PLEASE
Hi Guys..,just bought the Fkysky TX,.. a question,,do you have to set-up the kill switch on all models or do you set it up ONCE,, and does the TX remember all the different settings for different models you have programmed I.E trim expo ect,, ?.. thanks for a great tutorial ,,,
You will need to setup each model individual. There is not a 'master' kill switch. But just copy your model in the menu and you will not have to reprogram anything.
you Miss "fail Safe'' option
I turned the throttle down so only get 3/4 power, done that as i riped the wings of me plane at max power, :)
Does this tx have the ability to change the modes. ie have the throttle on the right stick
It can be done but not quickly. Check RUclips for video of process.
I hope they have elavon mixing unlike my Turnigy Evolution Pro
yes, they do
Aré there any micro receivers that are compatible with this transmitter? Something like the EFlite EFLU4864 ultra micro receivers? Or am i stuck with using only Flysky recievers?
There are plenty of mini Flysky receivers. Just Google it. You can't use Spectrum (EFlite stuff) with this without adding an outboard module to the back of the FS-i6X.
Can you recommend a cheap BNF plane that works with the FlySky i6?
dont get a BNF, get a plane that uses the FS-i6 receiver ....it comes with the radio.BNF are noobie mistake planes.