Hi Srinivas, thanks for sharing your modifications. On my int650 (your same model) I just added risers +4cm, from Zana motorcycle, in order to have a more vertical position during riding. Bye
Thank you for watching the video! :) I would most probably be going for the motone up and over risers for Interceptor 650. Those look really premium, plus I'm saving up for it too as they are quite expensive.
Hi Srinivas, thanks for sharing your mods with good detail. Quick correction on handlebar diameter - should be 7/8" and not 0.8". Have you considered swapping the BS3-type switches for new rotary ones? Or any reasons that dissuade you from doing that?
Thank you for the information. ✌🏽 No I have not tried to add rotary switches for two reasons 1) It requires splicing cables to be able to install those, which is a no no for me, all my mods are bolt on fit. Even the turn signals that I have installed. (watch that video for more info) 2) Rotary switches in my opinion are not ergonomically built. BS3 type switches are much more comfortable and practical to use.
@@SrinivasGanesh My thoughts as well. The pass switch placement on regular switch cubes + possibility of adding headlight off switch outweigh the aesthetics of the rotaries. On splicing cables - you can swap connectors from older to compatible holders. But that's besides the point.
Santa might not be real and god might not make all your wishes come true but Srinivas bhaiya. I remember yesterday or day before I'd asked him in comments obviously to make make a review about the handlebars and here I come open youtube and there I saw a video named My custom handle bar setup - Interceptor 650 by Srinivas Ganesh. 😀
Fitted the black bars with Motone risers yesterday. The setup is now perfect! One thing though - newer ones are not hollow at the ends and come with threads at the ends (similar to the isolator like what you saw on the Interceptor bars). The threads are larger than the Interceptor's, so the stock bar end weights don't fit.
Hey! There’s a card on the right corner, when the lever section plays. Check out the timestamps in the description. That will lead you to the installation video of these levers.
Hi Srinivasa, please share 1 inch handle bar riser link. Planning to do same set up using Himalayan bar. As you mentioned I too want to avoid aggressive stance..
Thanks for another informative and well narrated video, although I could do without the collision with the van....😅.I noticed the braided brake line. Does that change the feel when braking?
Thank you for watching the video. :) That braided brake line comes as standard. The feel of the brake is good and has a good bite to it. You do get to feel that behind the handlebars. :) Lol. At that moment of impact I surely thought I lost a let. But thankfully the speed was low and learned from my mistake. And now I use it as a funny meme. 🤣
great narration and filming !! 👍 are bar end mirrors really work as intended or just for looks purspose as they comes at very steep price compare to regular ones . i like those levers really looks premium & functional !!!
Thank you for watching the video! :) They add style factor to it. Just a different way of mounting mirrors. However, my reason for changing them was, because I am tall, I often see my own shoulders and they sort of hindered the view behind. But, yes nothing more in terms of functionality. The bar end mirrors from Royal Enfield do come at a steep price, but so does the touring version of the mirrors.
Not yet, but they are quite sturdy. As in even on the speeds of 90, 100. They are very stable and sturdy. Plus I generally avoid riding in crowded places as a rule of thumb. Thank you for watching!
Well, it's an air cooled engine, sadly that is just the way the heat dissipates. I guess I was used to it given the fact that I used to Ride a Harley Fat boy before this, so I'm used to it. But I ride with good riding gear, so I barely feel anything, unless I am standing under the midday sun, and that too stuck in a traffic jam, then surely I would melt. Or anyone for that matter. But yes, I'll do some research and make one video for sure.
If you are considering buying quadlock for 13.5k(Mount) + 4.5K (Dampener) + case, you should consider cheaper mount and a cheaper phone for the same price or even less price and save your good costlier phone form harsh hot weather of india. and also it is good for your battery life in long run. just saying...
Or make friends abroad who visit India from time to time and get you Quadlock mount with vibration dampener in under INR 6k, because you want quality stuff which will last a long time and not buy cheap stuff and replace it ever 6 months. 🙏🏽
Haven’t heard anyone talk about a handlebar vibration dampener. If you could research about it and let me know that would be great. I’ll make a video/ short on it.
Hey Srinivas, somebody online said he needed to change the left side controls to accommodate the Himalayan bars. Did you have any issues fitting the INT650 controls to the Himalayan bars? Thanks!
Defiantly like going with the all black look up front, and the you lost some weight getting rid of that stock bar looks good Srinivas👍 Quad lock is a wise choice I've had no issues with my phone with it.
that is true. the foot peg placement is awkward and is a big issue and shorter people do not like it one bit, it constantly gets in the way. But for taller people it doesn't come in the way that much. But yes, I'm looking for something sleeker and minimal.@@MrAmoLLL
I have installed Powerage short ones. There is a detailed video on its installation and a flyby video. Do check it out.! Thank you for watching this video.
haha I want to, but everything will probably make it look a little shabby. And I don't want to sand it. Will definitely figure out what I can do with those. Thank you for watching the video!
Thank you for sharing the details on the setup, really helpful in planning mine..🔥 good vlog 👍
Hey! Thank you for watching the video! Good luck! ✌🏽⚡️
Hi Srinivas, thanks for sharing your modifications.
On my int650 (your same model) I just added risers +4cm, from Zana motorcycle, in order to have a more vertical position during riding. Bye
Thank you for watching the video! :) I would most probably be going for the motone up and over risers for Interceptor 650. Those look really premium, plus I'm saving up for it too as they are quite expensive.
Gonna copy paste some of the products on my bike too 😅, another informative video ❤
hahaha you are most welcome to! Links are in the description! Happy shopping! :) And thank you for watching this video!
Hi Srinivas, thanks for sharing your mods with good detail. Quick correction on handlebar diameter - should be 7/8" and not 0.8".
Have you considered swapping the BS3-type switches for new rotary ones? Or any reasons that dissuade you from doing that?
Thank you for the information. ✌🏽
No I have not tried to add rotary switches for two reasons
1) It requires splicing cables to be able to install those, which is a no no for me, all my mods are bolt on fit. Even the turn signals that I have installed. (watch that video for more info)
2) Rotary switches in my opinion are not ergonomically built. BS3 type switches are much more comfortable and practical to use.
@@SrinivasGanesh My thoughts as well. The pass switch placement on regular switch cubes + possibility of adding headlight off switch outweigh the aesthetics of the rotaries. On splicing cables - you can swap connectors from older to compatible holders. But that's besides the point.
@@srinivaskirthy yes sir!
Santa might not be real and god might not make all your wishes come true but Srinivas bhaiya. I remember yesterday or day before I'd asked him in comments obviously to make make a review about the handlebars and here I come open youtube and there I saw a video named My custom handle bar setup - Interceptor 650 by Srinivas Ganesh. 😀
Hahaha thank you for your kind words, for your support and for your suggestion! :)
I love your content man. Thanks a lot for all your time and advices 🙏. I have a qquestion please. Did the handlebar get rust with time ?
You're welcome, thank you for watching my content. Are you talking about the chrome handlebar or the black one?
@@SrinivasGanesh it's a pleasure. The black one
Fitted the black bars with Motone risers yesterday. The setup is now perfect!
One thing though - newer ones are not hollow at the ends and come with threads at the ends (similar to the isolator like what you saw on the Interceptor bars). The threads are larger than the Interceptor's, so the stock bar end weights don't fit.
My Motone Risers come tomorrow. I CANNOT WAIT!!!!
Ah! Got it.
Hi can I get middle rod for interceptor handle let me know where to purchase not available in showroom
You can’t. That comes with the handlebar. And is not sold separately.
Ok thanks some how could get clamps but centre rod I think I need to manufacture
you might have to manufacture them yourself. :( As those components are not sold separately. @@HimanshuPatil-n3b
Which handlebar risers would be perfect on the stock handlebar for a 5.7ft rider?
Any more than 1 inch risers, then you would probably need longer cables.
But any 1 inch riser would do the job.
Hi sri, could you please send a link to those custom levers ? Want to get those soon thanks.
Hey! There’s a card on the right corner, when the lever section plays. Check out the timestamps in the description. That will lead you to the installation video of these levers.
Thank you for watching the video!
@@SrinivasGanesh Thank you 👍
my pleasure@@devak7500
Why don't u try meteor handle bar
Doesn’t go with retro look. 🫣
@@SrinivasGanesh thanks
@@SrinivasGanesh it requires. Me to change clutch and accelerator wire...? Or old one is good to go
Hi Srinivasa, please share 1 inch handle bar riser link. Planning to do same set up using Himalayan bar. As you mentioned I too want to avoid aggressive stance..
amzn.to/3Wfobwx
Really appreciate your videos mate.
I've taken your advice and added the Himalayan black handlebars to my Int 650. Just perfect!
Thank you so much for watching the video! I'm so glad that it helped!
Thanks for another informative and well narrated video, although I could do without the collision with the van....😅.I noticed the braided brake line. Does that change the feel when braking?
Thank you for watching the video. :)
That braided brake line comes as standard. The feel of the brake is good and has a good bite to it. You do get to feel that behind the handlebars. :)
Lol. At that moment of impact I surely thought I lost a let. But thankfully the speed was low and learned from my mistake. And now I use it as a funny meme. 🤣
How are you ordering from Amazon usa
At friend’s places and when they visit me in India they bring it along. 🙏🏽
@SrinivasGanesh okay I see.. Enjoying your videos brother keep growing.
great narration and filming !! 👍 are bar end mirrors really work as intended or just for looks purspose as they comes at very steep price compare to regular ones . i like those levers really looks premium & functional !!!
Thank you for watching the video! :) They add style factor to it. Just a different way of mounting mirrors. However, my reason for changing them was, because I am tall, I often see my own shoulders and they sort of hindered the view behind. But, yes nothing more in terms of functionality. The bar end mirrors from Royal Enfield do come at a steep price, but so does the touring version of the mirrors.
thanks for your words @@SrinivasGanesh
How safe are those phone mounts, has anyone tried stealing your phone while riding?
Not yet, but they are quite sturdy. As in even on the speeds of 90, 100. They are very stable and sturdy.
Plus I generally avoid riding in crowded places as a rule of thumb. Thank you for watching!
I am planning to do with my reborn classic. ... Pls give ur suggestions
go for it!
Link for handle bar risers?
amzn.to/4cFOWkY
Here
Thank you soo much sir
@@hammadsiddiqui7317 my pleasure sir
Bro what about hitting issue in interceptor, my thighs are burning , pls make video on heating issue and resolve it
Heating
Well, it's an air cooled engine, sadly that is just the way the heat dissipates. I guess I was used to it given the fact that I used to Ride a Harley Fat boy before this, so I'm used to it. But I ride with good riding gear, so I barely feel anything, unless I am standing under the midday sun, and that too stuck in a traffic jam, then surely I would melt. Or anyone for that matter. But yes, I'll do some research and make one video for sure.
If you are considering buying quadlock for 13.5k(Mount) + 4.5K (Dampener) + case, you should consider cheaper mount and a cheaper phone for the same price or even less price and save your good costlier phone form harsh hot weather of india. and also it is good for your battery life in long run. just saying...
Or make friends abroad who visit India from time to time and get you Quadlock mount with vibration dampener in under INR 6k, because you want quality stuff which will last a long time and not buy cheap stuff and replace it ever 6 months. 🙏🏽
@@SrinivasGanesh how much price for stock handle more than 1000rs
@@VaakmyTdidn't get your question
@@SrinivasGanesh i am look for a interceptor handlebar.i don't know about price. That's what I asked
@@VaakmyT Ah, this was from Royal Enfield itself, costed about 2,500 rupees.
I thought I mentioned this in the video itself. :)
in my case I used renthal 971 I just removed the foam cover
That is great! Thank you fir watching the video too! ✌🏽🤙🏽
Is the Himalayan handlebar wider than the stock one and also lower than the stock? Btw nice video. Started watching all your videos one by one 😅
It is slightly lower. Thank you so much!!
@@SrinivasGanesh is it wider than the stock one?
@@ganeshrajm same
Himalayan handle bar control the wobble issue
I don’t think so. They tyre are the main culprits. ✌🏽
I need a handlebar vibration damper that's available
Haven’t heard anyone talk about a handlebar vibration dampener. If you could research about it and let me know that would be great. I’ll make a video/ short on it.
Sir, where do you buy those headlight bracket(clamp)?
Roadpower customs.
Check description for links
Loved the black handlebar. Ordered it, getting it installed tomorrow!
Oh that is great! Congratulations on your purchase! thank you for watching the video!
P.s. Installing it yourself is an amazing feeling! :P
Hey Srinivas, somebody online said he needed to change the left side controls to accommodate the Himalayan bars. Did you have any issues fitting the INT650 controls to the Himalayan bars? Thanks!
Himalayan handlebar is plug and play on interceptor 650. No drilling required.
his sir,im confused between Aew 102, Powerage and Red rooster..could you please help me to pick the best one.
Powerage. My pick.
05:37 I said this once, Near Karol bagh.. He said, Apna kaam Kr l@ude😅 Han, But You are tall man.. You can say that😪
Hahahaha
Defiantly like going with the all black look up front, and the you lost some weight getting rid of that stock bar looks good Srinivas👍 Quad lock is a wise choice I've had no issues with my phone with it.
Thank you for watching the video John! :) yes Quadlock is amazing and the new handlebar is definitely lighter than the stock one!! 😎🤩
any better rider footrest extension? saw tec footrest any better option m
Not yet. Still looking for something sleek and minimal.
@@SrinivasGanesh that's really big issue i believe for interceptor. needs to be sorted
that is true. the foot peg placement is awkward and is a big issue and shorter people do not like it one bit, it constantly gets in the way. But for taller people it doesn't come in the way that much. But yes, I'm looking for something sleeker and minimal.@@MrAmoLLL
You can look into Continental GT 650 rear sets. @@MrAmoLLL
@@SrinivasGanesh I don't like rear set as my last bike was Gixxer had same. I'm looking for bit relax riding triangle
Loved your video mate. Kudos
Thank you for watching the video buddy!
Hi bro can we fit RE Bar end mirrors in this (Himalayan)bar plz
I believe you can.
Awesome video as usual
Thank you for watching the video. ✌🏽
whr can i get that handle bar grips? Can u plz provide the lnk
Did you check the description??? I did mention it in the video, that "links to these items will be in the video description."
Great Video as always. Its nice to hear from you .
The Exhaust sound at 0:22 onwards flashback is coming from the Powerage Long types ?
I have installed Powerage short ones. There is a detailed video on its installation and a flyby video. Do check it out.! Thank you for watching this video.
@@SrinivasGanesh thanks .
I read your reply in my head with your voice 😀
hahaha that's a first! 🤣@@anuj87in
Haha, high beam victim 😅
Lol! Aur kya!
You cant paint the mirror scraches
haha I want to, but everything will probably make it look a little shabby. And I don't want to sand it. Will definitely figure out what I can do with those. Thank you for watching the video!
As Always great informative video. Planning to go to Thailand and get parts for lesser rate ;-)
That is amazing! Thank you for watching!
Can i use it on hunter 350?
Don’t know. Try it?