Yamaha Snowmobile Left in Woods for 8 years! (Will It Start?)
HTML-код
- Опубликовано: 17 дек 2022
- Liking these videos? Want to see me revive more cheap snowmobiles?? Give me a list of sleds I should be looking for down below! I'm also thinking about giving one of these sleds away to one of you faithful viewers.
Авто/Мото
Liking these cheap snowmobile revive/rebuild videos?? Want to see more like this?? Give me a list of some sleds you want me to try to get a hold of. I'm also thinking about giving away one of these sleds to a faithful viewer such as yourself!
A flextrac/Finncat
Ockelbo 300🥰
Mxz 800
2001 Polaris Edge X
Keep ‘em coming brother! Don’t forget the annual Santa camping trip!!! 🙌🏼
Your patience and persistence towards making these old sleds go again is admirable. I’d be throwing tools and cussing non stop 😂 Great job! These videos are awesome!
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
Absolutely love this channel. Miss the carb doctor Valhalla mike. Need to see him again
I bought a Yamaha Viper for $600 before. It had Bender triple pipes and all kinds of aftermarket parts on it. It wouldn't run so I got it cheap. It just needed fresh gas and a carb clean. I love watching you fix these old sleds !!
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
Thanks for another great vid!! It's always a good time watching you get a neglected sled running.
Loving these videos , can wait to see you get them out and ripping and hit some ditches !!
I used compressed air and held a shop towel around the filler neck and watched the fuel go into the tubes on the carbs for the 97 vmax 600 I just picked up. Worked really well.
steve rowell: awesome job, jeremy! You are quite the mechanic. Interesting to see how you fix all these machines. Enjoy watching your channel.
Great job 👍 WOW those old sled videos are awesome 👍👍
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
GREAT VIDEO! Let’s see what it does out in the woods!!!
Awesome video keep up the good work Job Congratulations merry Christmas
Awesome as usual keep them coming dude ,great to see you casting some vids!!
They yamaha pro action sleds were great sleds I've owned 13 so far and always looking for more
I love these kinds of videos! You should try to find an old zrt triple. Although I think you should keep making content with this machine. It’s super cool!
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
Love these sleds, my son and I have 2,
Hunter at Als comin in clutch with the trailing arm 🔥🔥
I had a 600 and I loved that sled
just got my first machine for free that hasn't ran in 10 years and has been under a tarp, hope i can get it running! carb was PERFECTLY clean by some miracle
Beauty find. Might want to check that exhaust as well. There has to be a nest in there.
so stoked to see a new video
Just gonna say that's a cool raider in the background
Loving your vids .. keep it up man also love Olight flashlights too nice !
Love me a good ole Vmax. Resurrected a 600 twin last year. Merry Christmas to you and your family, man!
Love these videos
You should grab yourself one of them ol’greasy triples. Classic XLT would be sweet man. Videos are great keep them coming
I really enjoy theise vids
I have watched every one of your videos!! I would love to see you get a 97-99 MXZ 670!
I love the old sled videos!
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
My brother just restored a 2000 phazer 500. Basically the same sled except tge vmax is liquid cooled. These things ride great
Thank good ur back I've been missing ur videos bro
I've been a sub for a while. Love ur videos. Keep making more old sled videos
Any polaris xc sleds are awesome. Every brand is great except skidoo. I get pumped everytime i see a sled upload from you man
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
would love to c an old edge get revived, as always love the vids!!!
Jeremy, This would be a really good sled to restore, at least enough so it's a good reliable and comfortable.
Yeah great sleds woooow 😳
Good stuff!
Dude, buy a torch! Save yourself some effort! Keep on doing what you're doing. Love the video!
Keep up the good work any scorpion sled would be cool to see on the channel
Triples! I just bought a viper for 600.00 been sitting since 2010.
Awesome video Jeremy, really stepped up the videography and editing. I hope things are going well for you and I'm looking forward to more. Might even motivate me to buy a sled again 😆
Fun video. You should put some grease on those ski bolts too to prevent them seizing again
Speaking of the viking himself..where has Mike been?? I'd figure he'd be all over your recent vids
Wow good deal. And great job getting it up and going. I found a 97 Yamaha Ventura 600 that is sitting for a long time very dirty and engine will pop on gas poured into plugs so hopefully if I get it I can get it up and going once it’s cleaned up it’s gonna look great as it’s in great shape minus the dirt. I will need a new track and belt and fuel system cleaned out
Dude, seriously his videos are so lame. Why you would support this lame content is beyond me 🤦🤦
I just picked up a 1994 ski doo stx 583 for $400. of coarse i had to do quite abit of work on it to. But the deals are out there. Just gotta keep your eyes open.
I would also like to see some riding videos!
I got my self a 91 ext 550 that say for years that I got running. Still tinkering with it, getting it fine tuned
I was looking at buying that sled haha
I own one of them and There great sleds
pickup a sonic cleaner works wonders on carburetors, I have one from hornady for cleaning brass its just big enough for a carb.
Awesome sled i have a Yamaha Raptor 660r Yamaha vmax600 a Polaris trail boss 325 Yamaha exciter II 570
A little bit of heat and a light impact will do wonders. Good looking slide though not bad ..
Hell yea! Smokin deal!
The sleeve in the ski it's primary purpose is to keep the ends from collapsing inward when you tighten the bolt
I have a 97 SX 600R that is mint! I want to sell it. It has a Camoplast Predator track 1 1/4" and Plastic Yamaha ski upgrade. Runs great about 4k miles. Rode it last year.
Nice!
I trick that I learned this year is when the gas lines are dry and you put gas in. Put a rag around where you put it in and poke a hole in the rag with the air compressor then watch it push the gas
These videos are amazing + try and find a not running ski doo 550f year 2008
I enjoy them, sadly in Ontario (Canada) a $300 sled would probably get you a piece of the hood
Great Video! Any advice on a 90 Arctic cat prowler 440 that bogs down once weight is on it...worked good for a while after carbs were cleaned then has trouble going up hills. Clutch was checked and seems to grab at the right time. I'm stumped!
not sure if this is well known or not but when im dealing with rusted bolts i get it as hot as possible then spray with penetrant right after, rinse and repeat two or three times and it usually does the trick
It’s time for a sled dolly don’t you think? Haha I had a Vmax identical to that it would do a solid 115 across lake Bomoseen
You should pressurize the tank with some air. This will push gas out of the tank and prime the carburetors.
My dad gave a 500 vmax, fun rig, just bought me a 99 phazer 500 with 700 miles on it, id like to see this this restored
That's awesome 😎😎
picked up a 98 vmax xtc 700 for $325 with 2500 miles on it. only thing wrong was tors sensor kicking in. loostened the throttle cable and have been riding it for 4 years now
Great job fixing this sled, gotta keep the old reliables ones alive. But please invest in an impact gun, it’s stressful watching someone use a ratchet for everything😂
Good video. I’d like to see a Polaris XLT 600 triple or an ultra if you can find one.
That's a 98, 99s are silver and have the newer gauge cluster with the gas gauge on the dashboard. well the 98 Vmax 500 XT is black and red with the older style gauge cluster and an in-tank gas gauge, I have first-hand experience with this sled because my primary sled is a like Factory new Vmax 500 XT.
Damn u got some cheap sleds 🙈 they are so expensive here 😅
You should get a ultrasonic cleanier so you can clean carburettors and other parts
i love the old vmax's!
Have the same sled mines a 95 tho it's a tank it rips with a adjustable 600 clutch
I have one of those in a 600 with viper Suspension
I have an 03 viper like you have it ran ok for a bit but it bogged and backfired now it won’t go
Throw the bushing in the fire get it cherry red and punch the bolt out done it multiple times
This!!
I wish i was lucky enough to win one of these just because I love your videos. I was actually just wondering what you do with all of the sleds you fix
Looks like your trucks dash is lit up, hows it running there bud?
I would've put some mixed gas down the plugs holes right from the get go...
IVE GOT A 99 VMAX 600 GREAT MACHINE
what was leaking from the engine at the end ?
You need to invest in a Ultrasonic cleaner and save yourself some grief. Save some $$ on carb cleaner as well. Hope you get good snow, a little more riding content. I'd like to see an older Ski Doo Blizzard revive, '77-'83 vintage. I had a '79 7500 with the 340 LC. Pretty fun for 70's era sleds. 2 stroke rotary valve Rotax power baby!!
It's a Yamaha of course it will run
Hey mike how much do you what for that black and blue Indy 500 will you sell
Do you have a Ford ranger or have you had one in the past
Cool
My brother has an snowmobile about that age someday I would like to find an skidoo mxz
We need an rx1 update video!
How about a late 90s Mach Z?
When coming out with riding vids
If you use combustion chamber cleaner to clean your carbs; you will be shocked how fast and clean they turn out.
YELLLLLLL!!!
Are you selling any of these machines
It looked like that trailing arm had been sitting on the ocean floor since 1792, when Columbus sailed the ocean blue.
That mouse piss really corrodes the aluminum.
Brother lets do a rode in tjis year with Vahala Mike and traveling man please live in Vermont
Frig yeah
You can get.replacement buttons at ace
Please get a yamaha triple 🙏
Where you from
I love these videos man but I ain't going to lie that's a little bit too small of a bolt