Will an ABANDONED 2 Stroke Motorcycle Run After 20+ YEARS!?
HTML-код
- Опубликовано: 21 апр 2023
- Go to buyraycon.com/jyd for 15% off your order, plus free domestic or flat fee international shipping. Brought to you by Raycon
Today we bring an abandoned Suzuki GT185 back to life!
MERCH! www.junkyarddigs.com/
Send us stuff!
Junkyard Digs
PO box 1623
Ames, IA, 50010
Follow the gang!
Junkyard Mook:
/ junkyardmook
Dylan McCool:
/ dylanmccoolvideo
Cars and Cameras:
/ carsandcameras
Pole Barn Garage:
/ polebarngarage
Thunderhead289:
/ thunderhead289
Wrenchin Redneck:
/ @wrenchin-redneck
TheCriag909:
/ thecraig909
DeBoss Garage:
/ debossgarage
#motorcycle #revival #junkyarddigs 
Авто/Мото
Go to buyraycon.com/jyd for 15% off your order, plus free domestic or flat fee international shipping. Brought to you by Raycon
What speed can you hold it at and what top speed
You should consider doing a vintage bike challenge like you did with the snowmobiles.
save 15%
If u really want that chrome to come back Id reccomend Never Dull its a much finer wool and it already has the compound inside of it
One question did you try the key on the old lock? Because back then alot of bikes only had 1 key for all models. My old bikes key basically had a screw driver for the key and nearly all old mopeds and so on had the same so you could either take it from a diffrent model or just use a flathead screwdriver
The rest of the world, “Its Earth day!”
Kevin, “Heres a video on getting an old two-stroke motorcycle running.”
😂
I didn't even notice🤣🤣
@@JunkyardDigs it’s okay lol comes from the Earth
Its good for you, Lets you know that you are alive.
Less CO2 emitted per mile than what you normally show here.
I think getting an old machine running, is better for environment than mining, engineering and building new one. But, I also love 2-smokers. Ha!
Kevin and his friends getting drunk always result in the best segments of videos 😂
What can I say, we're naturals at it 😂😂
I keep yelling at my phone you need a choke on the right carb! Your gonna be getting unmetered air!
The body shop dude is so funny!
I couldn't stop laughin at this.
@@JunkyardDigs GOOD ONE KEVIN !! 😂
Synchronizing early Suzuki 2 stroke carbs is a little more complicated than just making sure the idle screws are the same. Make sure that both slides are opening at the same time when you twist he throttle, too. You can make the adjustments in the throttle cables by varying the amount of slack in each cable. Probably you already knew this. Nice that the CDI still works!
Also, the proper air box will help imensely.
Also, I would de-coke the Exhaust Silencer, there will be years of coke inside. Engine will breathe with better gas flow.
check for proper backpressure in the exhaust and always tune for max vacuum, usually between 20-25.
@@peterduxbury927 kerosene, or the crispy flame torch ?
Love the small engine stuff, it's more relatable to the average home mechanic. Small cheap and easy projects you can do with basic tools. And pliers of course.
Amen! I love these kind of videos.
Can't forget the pliers
Can’t find engine parts…..
I'm 72 and you just made me 16 again! Oh the glory days of leaving school in a fog of blue smoke! Great video as always, keep it up!
We need more of Tom. He is such a character.
Tom is da man!
Has he got a yt channel?
If you put the air filter(s) back on, you'll probably get some of your low-end performance back. They tend to richen the mixture back up a bit, especially on small-bore bikes. I used to have an early Suzi 125 twin, and it was a little screamer also!👍😉
Hey Kevin, how about a "fleet" update on some of your iconic builds? What you still got, what's been sold, what runs and what needs a bit of love etc. Would be keen to see it. Love the content. Definitely my favourite channel on YT.
Will it run? Well duh. I’m just going to put this out there, after watching many of your videos Kevin, I think you could make a piece of wood run again. Lol. Your skills, and knowledge, are top notch. That’s why I enjoy watching your channel so much. I, like most of us, have never met you but you just seem like a personable and genuine person. There needs to be more of that out there.
Hahaha, piece of wood. Sounds about right
Long time viewer
But spraying those side covers ridiculous colours
What a waste of time after cleaning and sanding them
@@RubyDash_ Now I want to see a piece of wood revival. Not sure what it would entail, but I'd be there for it.
A piece of wood? 🤔😳😳🙈🤣
It's unfathomable that those carburetors survived to live another day! That bike deserves full restoration or at least a mechanical restoration and clear coated vintage patina. This by far is one of my favorite videos yet👊
Not really those oem carbs had better castings then normal Chinese carbs nowa days. They actually wanted to take pride in what they put out back then.
@@jasonhudson5861 they are still very old, and have been sitting for decades maybe with fuel in it for some of the time, not to mention the fact that unlike a car where there is a hood and fenders shrouding the carbeurters, the motorcycle card is fairly exposed to the elements. a chinese carb wouldnt has lasted as long i 100% agree, but it is a very rare occurance for ANY carb that old and in that situation to still work even at all.
I had a ts185 as my first bike back in the late 90's....They absolutely refuse to die.
@@LooseFrait idk bud pulled many old bikes out. Mostly you’ll have problems with the gaskets being non existent or the jets being totally clogged but with a lil compressed air an pipe cleaners it’s not hard at all to get these old carbs back in shape but with all the repairs I’ve done a carb rebuild has never been more then 30 bucks on a carb.I have yet to see an old carb be in such shape that’s it’s not usable unless some pin head went in an tried to screw in some jets Crooked or broke the main jet casting an this goes for the in-line 4 carbs as well there all splendid an easy money if you know what your looking at. Rather spend hours on an old crusty carb then buy a Amazon/eBay knockoff literally have pulled them off the bike to clean brand new just to find out the air ways are completely clogged with cast
I was sent a link from my son in England (I now live in Australia) as I used to have an "old" 1970's 2 stroke! Mine was a Suzuki GT250X7 ... But HIGHLY MODIFIED!!
You were so lucky to get this one running, especially with no air box as it doesn't take much to burn out a piston (or 2) ... Trust me! I've done it often enough!!
HOWEVER this is a great video on getting the bike up and running. I loved the sound of the bike and I can still smell that 2stroke oil smoke!!! Am I jealous ... HELL YEAH!!
Blue side covers would have been just fine. That bike deserves as much love as you can give it. It's a classic.
This channel deserves to have 1 million subscribers.
I'ts getting up there
There only 21k short so they will get it just fine.
Share this vid and it will!
@@JunkyardDigs we did it boys
You just cannot beat the sound of a 2 stroke motor, they sound awesome. I totally rebuilt a GT250 years ago 😊
I had a 250. Wish I'd kept it. Was about 30 years ago.😊
@@Iaintwoke was 2008 I done mine
Street legal 2 strokes were not that rare back in the day, before (1998?) emissions laws? I had a 2 stroke Honda MT125 for years and Honda is famous for disliking 2 strokes. I never got my act together to get my motorcycle license though, and it got stolen around 2005. I am experimenting with small amounts of graphite in 2 stroke oil, using cheap old weed whackers. So far so good, but it must get past any fuel filters and too much can foul spark plugs. Graphite blows oil away on wear tests though, especially EP tests.
Great to see those almost forgotten little two strokes buzzing about. Brings out a small tear of nostalgia, I have Yamaha rd200, makes me laugh listening to the ring a ding ding of the exhaust note and annoying the neighbours on a sunday morning. thanks for this Kevin, made me smile no end.
Would love to see you do a lot more of these motorcycle revivals I know you specifically specialize in cars but this was an amazing video I didn’t skip a single part for once I find myself skipping through alot of the car and truck revivals anymore bc they get boring after while this video spiced it up a bit I love it.
Kevin this is by far one of my favorite revivals you have done so far. I thought there would be a lot of work and really surprised when there was really minor things you had to do to get it to run.
I would definitely have fun on riding that bike for sure. It definitely has a lot of power
This is so wild, I just picked up a 1971-72 Honda SL175 a few weeks ago seized since 1980s (Wifes dad bought it seized and never got around to working on it) and I have been tearing it down. Currently soaking the pistons. Love the videos, I'm glad this one somewhat applies to me!
Good to see a 70s 2-stroke on the channel! My dad and I revived a '74 Yamaha RD250 that was my grandpa's for me to ride and I loved that bike. I had to move out of state but it's waiting in the shed to be re-revived and enjoyed again one day.
Lord I love that 2 stroke sound! That brought back memories of my Yamaha RD200 while I was in Kansas in the USAF. GREAT show Kevin!!
I had a Yamaha YDS 250 in 1964 while station at McClellan AFB in Sacramento, Ca. Great cheap transport for an Airman 2C. Made getting to the bars easier except during the winter rainy season.
I just bought a near mint rd 200
@@quickturn66 I'm jealous!! I had a couple of RD200's and they were brilliant, but that was back in the old days, when I weighed ten and a half stone (150ish pounds)!
@@someonebald2022 I weigh 142 lbs. I brought a riding mower to fix from a guy last summer and he had some bikes, I said “ sell me this little Yamaha “ he said he’d sell it so some time went by and I sold some misalliance stuff to build up a little pile of money and turned up there a couple of months ago. Then suddenly he wasn’t sure he wanted to sell it. After going back and forth I ended up giving 1200$ for it. Said he had the title but after I paid for it he says he has to find the title. Lucky he called two weeks later and said he found it and would mail it, I said no,I’ll come and get it. It’s the original title from 1976 and the bike came from the dealer I used to go to in Auburn ny when I was a kid in the 70s. 3240 miles on it, original tires still good. Been sitting for 45 years, every thing works except the transmission was stuck but I made a special tool and freed it up. Now I have to change the crank seals , shift ,kick, sprocket seals and also fork seals. It’s super nice with only a few traces of corrosion,looking forward to buzzing around on it.
@@quickturn66 Take care of it. It’s a very sought after bike!
Back in the mid 60's Suzuki had a 250 cc street bike called the X6 Hustler . Insanely fast . Glad to see you working on it's newer little brother .
The emissions cleared up a treat. Sounds really healthy. Excellent work.
Not sure if anyone else mentioned it, but be careful with the rubber tank plug as a cap, Tanks need a hole for air intake or else it it will cause a vacuum in the tank and cause the bike to starve for fuel.
u mean like vacuum carb?
@@sargera1 Think of it like putting your finger over the hole on the straw of your drink, you pull it out, and suck the the bottom of the straw, what happens? You'll get the little bit of your drink, but the straw will suck together and you cant suck anymore. But if you let go of your finger over the hole, you can suck through the straw again. Essentially when you're sucking fuel out of the tank, you need air going into the tank, which is normally through a tiny one way valve in your tank fuel cap. If you plug the fuel filler hole with a plug, airs no longer coming in, so the same thing that happens to your straw happens to the tank. If the tank were super flimsy, it would start collapsing in, but since its metal or really thick plastic, it continues to pull a vacuum on the tank until it can no longer pull fuel, so the bike will run a little crappy and eventually die of getting no fuel.
Ya man keep doing these. 2 strokes friggin rule.
nothing better than a two stroke. The sound is pure joy and nostalgia (while also reminding me of the burnt cylinders of course).
I had a 250. Beautiful little bike. I wish I still had it 😊
My friend had a 250!
GT 250 X7 Limited Edition,
Had gold fork triple trees and a good looking black metal suspension forks and the back shocks were also trick,it had a special seat for the rider and then a shaped and molded seat for passenger , engine was polished and had black and gold accents, the barrels and head was painted and machine turned, tank was from a bigger gt or Suzuki 🤷🏻♂️
Handle bars were clip on gold and black,had a bit of a fairing around the front light that went down to a fairing that was behind the front wheel and formed a nose cone , front mudguard was nice looking thing 🤔🤷🏻♂️
And the wheels.....?!😳
Some type of 5 spoke 🤔
Either I don't remember correctly or they were a one of one 🤷🏻♂️ But they were a five spoke and were polished aluminium/magnesium
with black and gold 👌🏼 Looked amazing 👌🏼👌🏼👌🏼
And the most amazing thing about it was the
TWO MASSIVE ALLSPEED
expansion chamber exhaust that were nickel chromed and polished to mirror finish 😇
It sounded amazing 👏🏼👏🏼👏🏼👏🏼
It got to 6000 rpm and then 6500-it's just about to go and then bang 💥 7000-8000-9000 it's accelerating so hard the wheel is hovering as it does and ten 10,000-11,000-12,000 and then change gear and experience that again 👏🏼👏🏼👏🏼👏🏼😇
Never seen one like it again and can't find anything else on it, it was stolen in the middle of winter and never seen anything about it after that 🤷🏻♂️ 🤔
I’ve owned a bunch of these bikes, my favorite was 1972 GT 750, it is a 3 cylinder and has the most wicked sound. Someone across the pond bought it. They were referred to as a “water buffalo” I hope someone is loving it as much as I did.
bro, love that you are also doing motorcycles now, please more!
For people that don't have a lot of working space, a motorcycle is just so much easier and in theory works just the same as a car!
Hey Kevin put the airbox back on it and it will turn into a completely different bike. Those little 2smokes are very air picky. I have the same bike in yellow and they are a blast
Those Suzuki "Ram Air" bikes were quite a common sight here in the UK where two stroke motorbikes were common because of the good power/weight ratio and small engine size. They do make an awesome sound too.
I had the GT550 triple version of this bike. And I can confirm that it was loud, smoky, and scary when you hit the power band. I ultimately sold it for a 1984 Suzuki Tempter GR650 twin. It was also unique. It was a light weight cruiser the had a sportbike type rear suspension. It had a swing arm with a center mounted shock that you could adjust by turning a knob. Was ahead of its time for sure.
I love those old two stroke bikes. Had a Kawasaki 3.cylinder back in the 70’s and it would scream.
Having owned 2 of these bikes since 1974, I would like to suggest that there are clearly no baffles in the exhaust pipes. I strongly suggest you locate some and bolt them in. EVERYTHING about that bike will improve markedly!! sound will tighten up, as will the off the line punch!!
Pretty cool !! It's always hilarious when Kevin is working on something and it just happens to idle but he isn't expecting it to and he is "AMAZED". The look on his face is priceless... ha ha !!
Nice bike, I’m working on a 73 Suzuki T500 that was sitting in a barn many years. I just got a bonded title for it, nice runner now! Starts 1st kick almost every time.
Very under rated bikes. They were the best value around when new.
That is cool, my first bike was a GT380, it was a champ, it had a broken nylon gear so it would run 30 seconds then die, run 30 seconds then die, the guys at Seattle Cycle Center finally figured it out and I was off and running. The brake reservoir was ruined so I got one off a dual front disk bike, got a bolt that was the right sized, cross drilled it, drilled it down the shaft, tapped out the soft aluminum res to fit the threads of the bolt and I had stoppage. Man the things you do when you're young. I never had any problems with it. Not a greenstreak but still a cool fast bike. I kept up with a turbo bike and he said he rarely ran into bikes as quick as his. Bike was stolen years later. I hope the guy who stole it died on it. Thanks for the memories!
I know this was just a quick fix, but I’ve been doing this for over a decade now and one thing I always keep on the shelf is the POR-15 Tank Sealer for tanks just like this. Soak them in Evaporust then line them with the POR-15. It’ll seal any pinhole and line the tank.
Any experience with old Honda rebels?
@@thesovietvorona1007 How old? I primarily work with 70’s stuff but a motorcycle is a motorcycle
@@chadhanebrink8009 ah fair enough bud. Mines an 86’ with an 85’ motor.
I just got my 1978 kreidler moped 2 speed automatic 2 2/3 hp, a whopping top speed of 22mph. Last ran intermittently in 2017, but prior to that it was last running in 1981!!! Mine is street legal as well, 1 barrel carb, 1 piston 49cc engine. Using what I’ve learned from your channel I was able to properly revive it! Still needs a proper throttle cable but “we’re all about workability not lookability!” -Mr. John from golden rust or bust
I may have counted 3 EPA violations and 1 OSHA violation 😂
Heck yeah new personal best!!
Definitely going to want/need to do crank seals, even if they're "good" now after heat cycling they'll crack or wear and go bad. Clear sign of even a small crank seal leak for the gearbox side is excessive smoking or being lean on the stator side. Been restoring/reviving vintage 2 strokes for a while now, the Suzuki GTs and Kawasaki S1-3s are a little harder to find than the Yamaha RDs/YDS's but they're all cool and fun bikes!
175cc Yamaha, so much fun to run trails and do whooptedos on, yeah baby!!!
This video brought me back 46 years. My brother had a GT 185. His still had the original paint and looked pretty good. I remember the distinctive sound these bikes produce. I haven’t heard one running in 46 years, until now. We didn’t even have drivers licenses. And for a little bike it went pretty good. I miss those days. Everything was simpler. When you bought a motorcycle battery, it came with instructions on how to fill it with electrolyte. Now the instructions tell you to not drink the electrolyte. Brilliant!
Yup, I bought a sweet 1976 GT 185 in high school. Probably 1990? Was a stone-reliable bike that I just turned into a trail bike. Took of the front fender and threw a knubby out back, perfect. Been rocking my 2004 R1 almost 20 years. Purchased new and love it!! But I do miss the simplicity and tunability of several KDs and that 185 I owned as a youngin😊😊 Those late 70s KDs were bulletproof!!
Love how it sounds while idling and the tones during acceleration
Absolutely LOVE THIS! Glad you are going to have it titled and licensed! Make a small 'grocery-getter-trailer' and you can haul a BUNCH of beer over to friend's places!
Dude, I hope you do more motorcycles! This is awesome.
If it gets the views to justify another, you bet!
Loved it. Best job in my life was summer job 1977 working as a motor cycle messenger in London riding around in a little red 1974 Suzuki GT185. Worn out battery, worn out rear tire and no top box, none of which I could afford at 18, so always used the kick-start and crossed my fingers in the wet. Greatest fun delivering art-work for record companies, x-rays for hospital and cans of movie film in the days before digital. All strapped on with a bungee and regularly failing off. I clearly remember the burbling exhaust. Well done :-)
We love watching drunk Kevin and Tom shenanigans we need more of this 😂
drunk sucks. alcohol ruins families and lives
@@raymondo162use it in moderation
@@raymondo162alcoholism sucks being drunk every once in a while is a party
Im so glad you are doing a motorcycle revival. I hope you do more!
The shenanigans while painting them plastic covers was hilarious 😂
@23:00
I was given an 89 Kawasaki 454LTD by my adoptive father. His youngest son had beaten it to shit ,and Mel was so discouraged by it he just gave it to me. I spent a year slowly putting it back together, and like you, I couldn't STAND seeing the shiny stuff not shiny. I polished all the chrome and stainless steel, then spent several hours a night after work polishing all of the aluminum as well. I found new instruments and lights in an Oregon scrap yard, as well as new water pump, radiator, and fan.
Some 14 months later my wife and I loaded up and rode it from St Helens, Oregon to Yreka, California. Mel was almost instantly in tears. He was so happy to see that bike back on the road.
A little over a year and 21,000 miles later, we had to trade it for a car. I'd destroyed my back in a heavy construction fall and lost my career, our truck, and our home. While I could ride it just fine 100 miles each way to work in freezing weather, putting my wife on it lifted just enough weight off the front tire to make it dangerous as hell. I'll never forget the sound of the car behind us locking up his studs trying to get slowed down and get some space as our front wheel slipped and grabbed three times in quick succession. He protected us from other traffic until we got off onto the shoulder and into the gravel. I traded it that day, and I have never regretted something more, little choice as I had.
I felt about that Kawasaki the way you do about this little Suzuki. The day I got it running the first time was a wonderful day indeed.
Nicely done! That is worthy of a real restoration. Not as fast as the Bighorn 350 I had in 77 but probably a whole lot more practical.
And the useful rpm range is about 5 - 6000... but it goes like hell right there !
You hit my favorite era for bikes. I love old 70s era Japanese bikes. That tach and speedo are the same as the 71 and 72 TS185's we have around here! One of the things I love about your channel is the variety. You've messed with cars, trucks, 3 wheelers, 4 wheelers, limos, snow machines, tractors and farming equipment, and all kinds of stuff. Honestly if you find some random old relic with an engine and bring it to life, I've happy no matter what it is. Even that old weird engine you revived a year or so ago. Also, if you can find a GT750 "water buffalo" I'd love to see you bring one of those around. 2-stroke and water cooled for more adventure! I'd love to find one to play with.
PERFECT VIDEO!! I inherited my dad's 1971, Suzuki 750. It's a 3-cylinder, 2 cycle engine! I have all the parts and the Harley guys I know call it a "Water Buffalo". It hasn't been fully assembled in many, many years. So i have a huge amount of work ahead. I'm watching your videos and this one hit the proverbial nail on the head!! Learning something!! Thank you Kevin!!😀
Ahh yes "it will clear perfectly dry" I love it when the epoxy does that lol😂
May have been a bit hungover that day😂
That was a fantastic video. Didn't grow up around bikes or power sports so I know next to nothing about them but they look like a cheaper way to have a great time. Would love to see more bike content in general and a follow up on that gem of a Suzuki specifically some time.
I love your content Kevin and I know this isn't about the video but because of you and all your important information you have i learned how to do drum brakes on my 93 chevy Silverado its different than your usual drum set up but thanks again for all the good content and good information you give on all your knowledge on vehicles I've learned even more just watching your videos.
Kevin You showing this old classic Suzuki motorcycle so love and getting it running again it's awesome ,keep up the great work friend 😃😃🇺🇸🇺🇸💪💪👍👍👍👍
Takes me back to the 70s, thanks for the restore video.🙂
I absolutely love motorcycle content. Specifically pre 80's bikes.
Please do more of these if you can!
Love it!!! More 2 stroke content is always welcome. How does it run that good on dirty carbs?!?
38:38 "it'll clear perfectly dry" 😅 I know what you mean but I am cracking up 😂😂
Awesome episode, love those old 2 strokes. That guy that helped with side covers needs his own channel
Always a good day when Kevin uploads
That's what Mook says!
Great video! I had a free Boulevard 600 for years that I dreaded working on fearing it was locked up solid and I would need to haul it to the scrapyard. Took me all of two hours to make it run! You're inspiring others to do the same thing.!
What a great revival, love old 2 strokes, more please 😊
Great Content! I really appreciate the recent vintage snowmobile and now vintage two stroke street bike videos. Those are right in my wheelhouse and I am always searching YT for new videos. We met at ERX a couple months ago and I wanted to thank you for being so friendly and personable. Keep it up!👍
I'm surprised you haven't made a attachment for the pressure washer that would go in the tank and spin getting a ³⁶⁰ spray
Thanks for sharing this rebuild /revival !! It was fun !
Man... music to my ears!! Big 2 stroke fan and can appreciate the bike. Always a big fan of your videos/content and especially this one. Thanks for the video.
I am currently doing the same thing with a 1971 kawasaki f7. Been sitting for a long long time. Still even has the original tires.
Love seeing the old bike come back to life.
Wish I had that kind of vintage bikes in my region
Keep up the good work
Two stroke twins are a wonderful deal. Smooth and powerful when running well. They were normally lite weight for their size. This combination equils fantastic acceleration. Yamaha RD350s and 400s were lots of fun
Great video! Love the old 2stroke bikes. This brought me back to my his teen days working in a cycle salvage shop with 2 of my friends.
Great episode, these bikes are fantastic when dialed up right, and this one sounds really close to that. Do keep the videos coming, its a nice change of pace and this little piece of anger clearly wants to live and ride for many years to come, it deserves to be cleaned up nicely.
I loved seeing this, I have had motorcycle fever for a long time and this hasn't helped me any. I would love to see more motorcycle revivals!
More of this please! Love vintage Japanese bikes!
Love it! 2 strokes was what we had when I was a kid, 50 now and having to make do with 4 strokes. Great video Kevin!
Small bikes are fun af, and quite economical too! I've got a four-stroke Yamaha bike that just sips fuel, it's lovely, esp. with European gas prices.
After seeing that smoke I feel a fitting title would have been "will it smoke?" Lol probably would have gotten cancelled so fast, lovely little bike Kevin, Mustie1 is someone if you're curious about 2 strokes engines, for a wealth of knowledge ;)
Very cool!
Having started out on 2 stroke street bikes way back in the '70s that exhaust note brings back good memories.
Suz T 500, Suz GT 550, Kaw KH 400. Haha, shoulda kept them all in a barn til today..$$$. Every one of those bikes was solid and reliable all day long.
Air cooled large displacement 2 strokes were thought to be a fools errand until Suzuki proved it could be done and done so well that they run strong today!
Kudos to you getting that GT running.
This video was so nostalgic for me. Brought back some great memories of my youthful days. I could feel it when you were riding through the streets. And now my heart aches for a bike. But alas, at 75, I don't think it is wise.
I am way intrigued by the mini sprint car
The best part of this episode was the effort that went into the custom one off side cowls 😀
Thanks for this video. Im glad you didn't crash on that thing. I love old bike restorations. Thanks.
Your video inspired me to look for one of these. I am really good with the two smokes didn’t realize they made a whole range of street bike 2 strokes back then. I found a GT250 for $600 locally. Really tempted! That thing sounds amazing.
Wow Kevin, surprised how easily it started after sitting so long. Your right about 2 smokes, they sound great!! I miss the old supercrosses with 2 strokes, would come home smelling like 2 stroke exhaust, nothin beats that smell!!! I used to ride an old yz 250R and my brother had a cr 80 then a cr 125, fun bikes!!! Great work Kev, nice 2 see a bike 💯!!
I remember a guy who I worked with in the late 70's who had Suzuki 500 two stroke which at the time was just a couple of years old. I owned a 1968 Triumph Bonneville 650 and he bashed on my old bike and that his bike would run away and hide from my old bike. Being 20 years old I had to demonstrate to him that particular bike was the fastest production motorcycle in the world until Kawasaki released the 903 in 1975. True his two stroke did rev so much higher than the ohv vertical twin in the Bonneville but went by him like he was dragging an anchor. That said there was a reason why Suzuki discontinued the two stroke motorcycles for the street. Good content as always.
In 1975 I had a friend in high school who rode a 74 750 Kawasaki 2 stroke, that bike was quick. Cool to see you venturing into these classic 2 strokes.
Great video Kevin, would love to see more bikes on the channel! 👍
love the motorcycle vids, totally wanna see more of it!
I just started watching your videos and you both make a great team! You both make it very interesting to continue to watch and Wait to see more! Continue the great work and good luck on more great finds!!
Kevin your a magic man and save the worst to turn into recyclable Master piece.
There's been a lot of bike revivals. Its a content gap message being filled. People are searching for bikes (lots of interest in them now, lots of electric options and gas, and the driver is the cost of gas and bikes shine in that), and repair and revival channels are getting told there is a content gap. It's good, love bikes even if I cannot ride em (cant skate either, same issue, inner ear damages).
Excellent video once again, keep up the good work
Just curious how you determine that this is excellent 3 minutes after release of a 45 min video FanBoi??? I like his videos too but do not suck his dick...
He could be humping a donkey 10 minutes in and you would still comment "this is the best eva"
What an amazing little bike, perfect for booting around town. Loved this episode Kevin, it's always nice to see something a little different. JYD never disappoints.
Tom killed it. Great video as always. Pretty mean little two stroke.
Not sure if this has been said but carbs are synced by opening both slides until they are even with the top of the carb body. This adjustment is made at the cable connection on top of the slides. I believe with them at full open you can set the oil pump as well. Also the GT 380s look better. All that ram air head style but with a third head! (And Cylinder...) Lastly don't run premix in Suzuki's, you need the injector to feed the bearings. Nice bike though! I'm a little jealous.
I always wanted to have a little bike like that just to run to town and back. Someday I’ll get one.
Eh…. kevin, seriously… this is one of the best channels ive come across. please keep doin what u are doin. Normal people like me who know nothin appreciate the way u explain things. Keep goin🙌
Great video as usual. I couldn't watch it last night because I went to my Senior Prom. Drove my dad's first car which is a 65 Mercury Comet. This bike is pretty cool. Keep up the good work.
Definitely enjoyed the motorcycle revival Kevin awesome video as always @Junkyard Digs