Very Rookie move! TOO THICK for a 1st coat! Its OKAY to let the trigger go! Your 1st coat should be a bout 80%-90% of a full coat. That way it dries quicker, and then you can put a thick topcoat over it sooner! Less time waiting for it to dry. Plus, its a more even, more consistent finish.
@skylerboland2342 Because some people love to sit back and complain about other people's work. Knowing some of them can't do any better. Looks like the guy did a good job to me.
Well the pump is most likely a 395 Graco or 400 Titan and needs maybe some throat seal and its tired. Doors like this i would use a 5/13 whicj is a 10 inch fan or a 4 /13 8 inch fan. Black always takes at least two coats..
How do control layer thickness. Is there kind of setting on the gun or do you have to apply try and error method to get the thickness required by end usre or owner
now when you open the door the edges of the door on the left and right will be white also the bottom of every door panel will be white I can paint that door with roller in maybe 30 minutes with better results , you have to: 1- tape everything around the door 2- setup the sprayer 3-cleaning the sprayer after using a black paint will take much much longer how do I know that ??? because I use sprayers for 20 years
@@amanapaintingltd5484i agree. Great work. I work in aerospace industry spraying and i notice that so many painters are insecure and judgemental. They dont even know that their comments are "ego" driven and usually come from a place of lack within. I wish all of them would google "why are people so judgemental and critical of others." That is when they will find out why they are so negative in the comments. As i said great work and ignore everyone else because im sure you're getting PAID!!
It’s really strange I’ve been painting for 23 years and everyone uses the wrong cartridges You should be using the olive striped canister multi gas vapour and the p100 on top. The black canister is just for solvent based paints like oil it doesn’t filter ammonia and the other chemicals that are in a lot of paints. Plus the n95 filter isn’t 99.9%. Protect yourself.
So 10% over lap? I've never used an airless sprayer , i just assumed it was like using a hvlp paint sprayer like id do on motorcycles, or car with light coats and 50% overlap.
What airless are you using ? Gun brand ? Tip size and housing , small or big orfice , type of paint , ? Please answer as i will be useless without this information . Also what shoes brand and do you tie the laces with bunny ears or are you a loop swoop and pull guy ? What meal do you have before spraying ? All this will be crucial information .
Looks great but I’m so upset it didn’t get fully covered before the video ended 😂
I'm sure you'll get over it.
Ocd killed u🤣
Me tooo!!
😂😂
Ikr
Very Rookie move! TOO THICK for a 1st coat! Its OKAY to let the trigger go! Your 1st coat should be a bout 80%-90% of a full coat. That way it dries quicker, and then you can put a thick topcoat over it sooner! Less time waiting for it to dry. Plus, its a more even, more consistent finish.
Couldn't agree more
He probably wasn't doing two coats
I love how he does something just fine and people still find a way to say something bad about it. coming from somebody who does this everyday.
@skylerboland2342 Because some people love to sit back and complain about other people's work. Knowing some of them can't do any better. Looks like the guy did a good job to me.
@skylerboland2342 it's not right and someone will follow this garbage
A 2ft wand would be a great tool to help from bending too much plus a wider spray tip would cover more area faster
Keep up the good work
Faster ?!
How fast do you need this to be ?! Lol
Half the time with bigger spray fan
That pump on its last legs 😂
How so?
Sounds like it’s dying 😂 or it’s a cheap boi
No that’s kinda normal for a graco airless, better add more throat tube though
@@jasonthorogood my gx21 runs fine 😂 if it sounded like that I’d be worried
yes you are right , I think is the super mini ones
you'll get there brotha 💯
That machine struggling I want to see what he is using.
I really like it and get the job done quick
Always release the trigger at the end of each pass… you are putting on way to much on the ends
No. You don't let go of the trigger until you're done. You've got to know how to flare the edges. He doesn't.
He covered the outdoor opener
Como se llama esa maquina porfavor
@@carmengarciaduran5978 airless sprayer. Creo seria,atomizador sin aire.
Well the pump is most likely a 395 Graco or 400 Titan and needs maybe some throat seal and its tired. Doors like this i would use a 5/13 whicj is a 10 inch fan or a 4 /13 8 inch fan. Black always takes at least two coats..
And the door needs to be lifted to paint reveals
It could also be Rhino machine
You should never keep the flow open the entire time...all your edges have way more paint on them than the rest of the door
🤣🤣
Learn to flick at corners. Never let off that trigger. I want max psi on that 1095 put a 721 in and let her rip
Looks good but you better open the door real soon before it sets up or you'll tear the Paint when it sets up and glues the door shut to the GDS
A real time and money saver
Satisfying vdo ❤️
If you get an extension you and spray vertically you need to make the most 5 steps. In this case you made at least 100 steps and hurt your back.
Bigger tip for your spray width
What the air spray machine call can I have link?
Good man! Wearing that respirator!! 👏👏👏
I would go crazy with that laughing all day. Sounds like it’s mocking you in the process
Parabéns irmão usando máscara de proteção 👏👍👈
omg this is better than the pressure washing idea
can i ask you about the number of tip and the pressure ??? thanks alot..
bien travaille félicitation mon cher peintre
Need me one of those
पूरा मशीन का वीडियो बनाया कैसा डियर प्लीज
What tip you using?
Come at my home i need to do some paintings lol
That pump noise makes me think there just a guy hand pumping behind the scenes 😂
OK merci
Gostaria de ver os resultados finais ☺️
저런 스프레이 쓸때는 성능좋은 산업용 마스크 꼭 해야함
How do control layer thickness.
Is there kind of setting on the gun or do you have to apply try and error method to get the thickness required by end usre or owner
What does it look like opening? Are the edges of the panels still white?
Good steady technique but if you dont let up on the end dont you get a lot of build up?
Hola gente quiere este equipo me pasan nombre de este equipo esta en Argentina me pasan numero de teléfono gracias
Nice!!
Thanks!
Professional would use a wand with a bigger tip.
Bigger tip yes. Wands are imprecise.
now when you open the door the edges of the door on the left and right will be white also the bottom of every door panel will be white
I can paint that door with roller in maybe 30 minutes with better results ,
you have to:
1- tape everything around the door
2- setup the sprayer
3-cleaning the sprayer after using a black paint will take much much longer
how do I know that ??? because I use sprayers for 20 years
Whatever whatever, but……. No way you get better results with a roller. Not a chance in hell. Except in your dreams.
Pressure setting kitne par rakhi thi ?
thought he was painting at the turkey farm at first 😂
Get a 5 tip and let your pump rest between passes, it will extend the life more
What brand of sprayers do u use?
Quiero una de esas !
I am just thinking about those side edges. He defo overspray them and will create bubbles.
Gun konsi h bhai compressor konsa h ye
What kind of spray gun are you using
Sounds like a dhol playing in the background 😂
maybe a different tip next time allowing for wider fan. also that's alot of movement but congrats on using a sprayer
517 ? Or 515?
What kind of paint use and name of spray machine
Which model is that ? How come there is so much slack , is it 3/4 meters ?
Thx 🙏
Que pistola usa para esa pintura amigo
Bhai aap ki services kis city m h
Fain Boss.
Takes a lot of practice and skill to be that slick with a sprayer. Great work brother!
Are you kidding me? I think it's just broke in his first sprayer
Thanks bro
@@amanapaintingltd5484i agree. Great work. I work in aerospace industry spraying and i notice that so many painters are insecure and judgemental. They dont even know that their comments are "ego" driven and usually come from a place of lack within. I wish all of them would google "why are people so judgemental and critical of others."
That is when they will find out why they are so negative in the comments. As i said great work and ignore everyone else because im sure you're getting PAID!!
It looooks really nice.....so on the video u can see a few spots like a lines without paint.....so that means u have to go back n repainted.....
The paint is still wet I guess when dry it will blend in and not noticeable
Who the fuck does one pass of paint? 2-3 minimum unless you like ripping people off
how much prize where to buy this machine..
Muy bien 👍🇪🇨
Take your time no hurry!
Hi, do you cover SE London?
No sorry
Sounds like a graco 395?
where to buy this ?
Where is the end?
Which one is airless
Change your filters the pump is struggling and open the door as you spray so you get the cracks
What about the door edges? And the 2nd coat ?
Doesnt need a 2nd coat.
What is the nozzle number?
Hey mr goerge how much for the new guy😂
It’s really strange I’ve been painting for 23 years and everyone uses the wrong cartridges
You should be using the olive striped canister multi gas vapour and the p100 on top. The black canister is just for solvent based paints like oil it doesn’t filter ammonia and the other chemicals that are in a lot of paints. Plus the n95 filter isn’t 99.9%.
Protect yourself.
suena como un bebé riendo la máquina 😂
Weiß war doch viel schöner. Du musst noch die Spalten bei öffnen des Tores bespritzen, sonst sieht man immer weiß, wenn sich einrollen tut.
2 series tips
Just like watching Tottenham
And the next day back to do it again and then nicely.
Do you do anything other than garage doors😂
HEPA CARTRIDGES 👍🏻👍🏻👍🏻👍🏻👍🏻
is it me or just that air compressor is dying? 😂
Why does no one just use a shield?
So 10% over lap? I've never used an airless sprayer , i just assumed it was like using a hvlp paint sprayer like id do on motorcycles, or car with light coats and 50% overlap.
A onde acho um desse qual o nome desse negocio
Whenever i use my graco gx19, too much paint gets wasted (flies away) while spraying. Any tips on how to reduce that?
Buy a better sprayer
My airless sprayer brand new worked for half hour won't keep pressure now ? Put in water it works ? Any suggestions 🤔 please
bring it back to harbor freight
check the air bleed and clean the filter
Pumps going to be funked😂
Architecture
Are u in nyc
Hello sir ji
Keep practicing
Cómo puedo comprar esa compresor manual (portátil) le hablo de Perú
I can still see holidays
I LIKE IT BUT FOR A BEGINER IT PUTS A LOT OF PRESSURE ON YOUR PERFORMANCE.
READER USE THE ROLLER
Es un chingon 💯👍
No no es chingon El cabron is the Walmart
I wonder if graffiti artists have picked up doing these jobs. They can draw better than your average painter.
2hrs later and some reason the door won't open
What airless are you using ? Gun brand ? Tip size and housing , small or big orfice , type of paint , ? Please answer as i will be useless without this information .
Also what shoes brand and do you tie the laces with bunny ears or are you a loop swoop and pull guy ? What meal do you have before spraying ? All this will be crucial information .
눈 보호 안경은 안쓰신거 같네요
Why do people use a 211 tip for garage doors lol
less overspray being outside it is harder to control where it lands.
ESCRIBAN EN ESPAÑOL PORQUE INGLES NO ENTIENDO UN JORACA. 😊
I was wondering if anyone else found this stressful. And judging by y'all comments the answer is yes. Hardly any encouraging words lol.
किंमत किती आहे
Need a better tip more spread