Hey BB. I'm 65 years young and just started dabbling in T-shirts. Already have a heat press and am currently shopping for a vinyl cutter. This info was very helpful as are all of your videos. I've watched a ton of them and they have all been top shelf. Thanks.
I’m actually looking to buy a vinyl cutter at the moment, and I was looking at the big generic models at Amazon vs a Cricut. Your right about having access to all the information online about these smaller machines vs the big generic ones. Thank you for this video
Aloha Big Brandoh, love the videos and your straight up knowledge. I have been researching the T shirt design for almost a year, learning a lot of knowledge from your videos. Being in the 808 state has it’s challenges but will not deter my goal, which is to retire and ooze my way into the t shirt design industry. Thank you for all your help. Aloha Will 🤙🏼
appreciate you brotha! lots of opportunity and money to be made in Hawaii. i see it all the time when im there. the good thing is local always supports local. if you need any help, hit me up.
@@BigBrandoh Wow, great to hear from you Big Brandoh. Mahalos for taking the time to reply. Built my table, heat press arrived time to put in the time or as you say, putting in the reps. I narrowed my decision down and went with HPN 15” x 15” signature series Pro, being from Hawaii I knew shipping would be a challenge and really like the press but more importantly the customer service and they were close. Time to check out some Big Brandoh videos and get repping! Thank so for sharing your knowledge, like going school again. Take brother 🤙🏼
They're both good. But it depends on the need. If I want to bang out a quick design of htv, cricket. If I need to be more technical, cameo 4 wins. It's like iphone vs android. Cricut is iphone and cameo is android. They both got a free version but cricut is way more beneficial. In terms of free designs and stuff. I've been writing about this on appareleconomy. I just featured big Brando on there. I wanna make sure ppl start out better than I did with the right info cause I went in with 0 knowledge
That’s part of why I went with the cameo because you are always dropping gems and like you said if I got to find something about it I will look up the big Brandoh salute and appreciate all them gems 💎 and always keeping it real
Agree w/you 100% Brandoh! I did research for about a year. Bought everything as I got the proper knowledge. So, I bought the HPN 16x20 slide out, which is SOLD OUT. Then I bought the Cricut Maker. While buying the Cricut Maker I saw a video for the Cricut Easy Press......The HPN 16x20 is still in the box. But I’m looking forward to implementing the Heat Press within the next couple of week because I’m getting bigger Merch orders. Why am I hear, at this point in my career?????? I started following you right before I purchased any of the above mentioned. TY for the knowledge!!!!! You Are The Top Dog! Salute!
Me too. It does everything I need and I love it. ONLY thing I wish is Print and Cut was larger. No need for super expensive shit. Its not about what you have, its about how to use what you got
yooo thats what im talkin about. if it works for you and your making money... thats all that matters. keep gettin that money!!! thanks for watchin and sharing
Saving up for the Silhouette Cameo Pro 24" , so as to do those biger vinyl jobs i get, the best thing with cameo is the software it so easy, like you said to find some one to help on YT, great video as always my young brother BB.
On point G! Its just like some of the FB groups im in. Every hour theres always someone who asks the same question that was just asked and hour or day before. Or asking to do something for them for their design. I ALWAYS refer them to watch YT because you cant always be asking shit for free. Its like the lost always look for a handout instead of researching on their own. Great video kuya!
well said! i know exactly what your talkin about! YT is deep when it comes to useful info. there is some BS floatin around but if you can filter thru that. You can learn anything on here hahahahahaa.
have you ever had issues with the blade? I have used cricut and im familiar with its program but after my research, i find cameo has that flexibility i am looking for . I am thinking of purchasing the cameo 4 plus 15 inch for tshirts.
“am i saying the cameo is the best cutter out there?Idk🤷🏾♂️‼️🤣but it sure as hell aint the worst” is what he wanted to say fr he was jus bein smooth wit it 🤣Great Vid G💯☝🏾
Got the cricut last year but I can't make the print then cut feature work. I've seen tons of videos so I think I'll sell it and get the cameo 4 plus or cameo pro. Thanks for the video pal.
Sup bro. When I tell you I watch all your videos I mean it dude. I got a job for my kids school doing... you guessed it.. some vinyl decal on the front windows. My little Cricut joy isn’t gonna cut it anymore so I’m upgrading. My question is, can you share a video of you applying a decal to a window? Thank you for all you do
i rarely bring my camera when im out doin installs cuz my clients dont even know i have a youtube channel hahahaahaaa. but if i get a chance to do some decal installs somewhere else. i'll try to record it
Great point double B, years back I had a graphtec and a Roland, now I’m looking to get back into it just for small stuff. I think I’m going to try the cricut first because it can be returned to the store if I don’t like it. If I buy the cameo 4 I would have to return it to cameo if I didn’t like it. Also the cricut is $179, so I’m going for price right now.
Hi Brando I was wondering if the Cameo 3 was better than the silhouette 3? not sure which one to purchase.I only want to create some mugs and infant onesies stuff like that.There is just so many different opinions about each.
dope! thanks for watchin. i got design vids on my channel. i show how i use the pen tool and also taking hand drawings and turning them into digital files. check'em out when you get a chance
Thank you I have been trying to decide which brand to get. I’m retired and wanted it for personal use as something to mess with once and awhile. I was considering bigger but agree with your logic. I think the cameo may be the right one for me. Thanks
Smart. Thank you. It’s like how I’m never quick to upgrade my computer. I find the best use, is in the long term knowledge of what I have. Not keeping up with the Joneses or having a pudding contest.
i probably wont be doin a video on that any time soon. i dont have a need for reflective heat transfers at the moment. i still have some EconoReflect left over from a previous job.
I got the cricut cuz it was on sale at Michael's. Tho I did more research and the cameo software is way better in my opinion. I'll be switching soon lol
Well spoken B! I recently got a cameo 4. What's the difference between the cameo and a larger cutter other than maybe pricewise. If it gets the job done that should be good enough. Only downside about cameo for me is the noise it makes when cutting. Thanks again for sharing 👍🏾
So people just think your a online help desk for all these companies? Smh If some of these folks actually go thru your channel the answer is there. After watching the vids the past few months I fully understand why the "Complaint Dept" is thriving. Lol!
I just got my cameo 4 plus a week ago and been cutting stuff since but i noticed when i want to use the FILL cut option and i already have my cut settings ready to go when i send it to cut it automatically sets the blade depth down to 2..could you shoot me any tips on how to fix that..gracias in advance👊
Good info Brandoh! I have both and they both can do the job. I think Cricket gets the most publicity because they have been out the longest I think. It also can be said that Cricket items are also sold in Walmart. You cant find Cameo products in Walmart, you have to go to Michael's or your local craft stores. People please remember, RUclipsrs cannot assist you with products they DONOT OWN themselves, and like Brandoh said, why would ANYONE purchase an item just to do a video on it and return the product???? Its pointless imho..Good job Brandoh, keep dropping those jewels!
Naw the cutters are to get to the money... I use Rolands and all... My Silhouette Cameo small convenient and does everything I need it to do besides cutting wider. Truly satisfied
BB💪🏾how do you deal with ppl that say “oh you use HTV?, you should learn sublimation, screen printing, etc”? “You would make more money”This annoys the heck out of me. Esp ppl that aren’t in the T-shirt game so they don’t realize it’s totally different equipment, knowledge, and techniques. What’s your answer to these types of remarks?
i got vids explaining this but dont let anybody tell you how to run your business. because they have no business in your business. and like Taleya said "Fuck'em" hahahahaaa you should never have to explain your business structure to someone who is not invested in your business. Always do whats best for you and your business.
Cameo has a servo motor, has to do with speed. I always tell people; "Buy what's in your budget!" And, I also always say; "RESEARCH RESEARCH RESEARCH!" Buy whatever the f.... works for you! I still have my Cameo 3, and it gets the job done! I've made ALLOT of money on that little mean "MONEY GREEN" machine. ♡♡♡
Cameo for small crafts? Fuck no. Ive actually built logos and designs on this program. Not bashing cricut but 🤣 you cant even use it with no wifi. Cameo made me 10k half a year. A cutters a cutter. Point blank.
3:59 Exactly! The support groups/videos are extremely helpful. I learned how to use my Cricut before I even purchased it!
Hey BB. I'm 65 years young and just started dabbling in T-shirts. Already have a heat press and am currently shopping for a vinyl cutter. This info was very helpful as are all of your videos. I've watched a ton of them and they have all been top shelf. Thanks.
Love to hear that. Never too late to start
I’m actually looking to buy a vinyl cutter at the moment, and I was looking at the big generic models at Amazon vs a Cricut. Your right about having access to all the information online about these smaller machines vs the big generic ones. Thank you for this video
Aloha Big Brandoh, love the videos and your straight up knowledge. I have been researching the T shirt design for almost a year, learning a lot of knowledge from your videos. Being in the 808 state has it’s challenges but will not deter my goal, which is to retire and ooze my way into the t shirt design industry. Thank you for all your help.
Aloha
Will 🤙🏼
appreciate you brotha! lots of opportunity and money to be made in Hawaii. i see it all the time when im there. the good thing is local always supports local. if you need any help, hit me up.
@@BigBrandoh Wow, great to hear from you Big Brandoh. Mahalos for taking the time to reply. Built my table, heat press arrived time to put in the time or as you say, putting in the reps. I narrowed my decision down and went with HPN 15” x 15” signature series Pro, being from Hawaii I knew shipping would be a challenge and really like the press but more importantly the customer service and they were close. Time to check out some Big Brandoh videos and get repping! Thank so for sharing your knowledge, like going school again. Take brother 🤙🏼
You are a smart young man who thinks differently from so many people on youtube I Love Your Channel
They're both good. But it depends on the need. If I want to bang out a quick design of htv, cricket. If I need to be more technical, cameo 4 wins. It's like iphone vs android. Cricut is iphone and cameo is android. They both got a free version but cricut is way more beneficial. In terms of free designs and stuff. I've been writing about this on appareleconomy. I just featured big Brando on there. I wanna make sure ppl start out better than I did with the right info cause I went in with 0 knowledge
thats right!!! share the info homie! thats dope!
Hilarious. He needed help and was trying to mind trick you into giving it to him. smh. I get the same questions. Good job as usual Big Brandoh.
That’s part of why I went with the cameo because you are always dropping gems and like you said if I got to find something about it I will look up the big Brandoh salute and appreciate all them gems 💎 and always keeping it real
mannnn i still go back and watch other peoples vids about the cameo if i get jammed up or forget how to do something hahahahahaaa
@@BigBrandoh hey brotha we don’t know everything but a little from this person and that person can be more then enough knowledge
Agree w/you 100% Brandoh! I did research for about a year. Bought everything as I got the proper knowledge. So, I bought the HPN 16x20 slide out, which is SOLD OUT. Then I bought the Cricut Maker. While buying the Cricut Maker I saw a video for the Cricut Easy Press......The HPN 16x20 is still in the box. But I’m looking forward to implementing the Heat Press within the next couple of week because I’m getting bigger Merch orders. Why am I hear, at this point in my career?????? I started following you right before I purchased any of the above mentioned. TY for the knowledge!!!!! You Are The Top Dog! Salute!
yooooo Jose thats what im talkin about! Get that money brotha!!!!! i appreciate the continued support
I realize I'm pretty off topic but do anyone know of a good site to stream newly released series online ?
@Cooper Ian Flixportal =)
@Nixon Reece thank you, I signed up and it seems like they got a lot of movies there :D Appreciate it!
@Cooper Ian you are welcome :D
Thank you for this. It's this real talk that help me look at the reason what I can do with the equipment. Thank I going stay in my lane. Thank you.
I have an Explore Air 2 Cricut cutter it Rocks!
Me too. It does everything I need and I love it. ONLY thing I wish is Print and Cut was larger. No need for super expensive shit. Its not about what you have, its about how to use what you got
yooo thats what im talkin about. if it works for you and your making money... thats all that matters. keep gettin that money!!! thanks for watchin and sharing
I got cricut. It does the job for now will upgrade later. Just buy what suits your need at the time
if it works and your making money. thats all that matters hahahaa.
Saving up for the Silhouette Cameo Pro 24" , so as to do those biger vinyl jobs i get, the best thing with cameo is the software it so easy, like you said to find some one to help on YT, great video as always my young brother BB.
i agree software is pretty straight forward. i like it.
Cameo blades are sold everywhere! For decals cricket and cameo are perfect!
Cameo is dope if u want 15in plus just gotta play with it
On point G! Its just like some of the FB groups im in. Every hour theres always someone who asks the same question that was just asked and hour or day before. Or asking to do something for them for their design. I ALWAYS refer them to watch YT because you cant always be asking shit for free. Its like the lost always look for a handout instead of researching on their own. Great video kuya!
As when we say yt they want us to find the info for them were it is who it is i've given up now .
well said! i know exactly what your talkin about! YT is deep when it comes to useful info. there is some BS floatin around but if you can filter thru that. You can learn anything on here hahahahahaa.
have you ever had issues with the blade? I have used cricut and im familiar with its program but after my research, i find cameo has that flexibility i am looking for . I am thinking of purchasing the cameo 4 plus 15 inch for tshirts.
“am i saying the cameo is the best cutter out there?Idk🤷🏾♂️‼️🤣but it sure as hell aint the worst” is what he wanted to say fr he was jus bein smooth wit it 🤣Great Vid G💯☝🏾
😂😂😂
Got the cricut last year but I can't make the print then cut feature work. I've seen tons of videos so I think I'll sell it and get the cameo 4 plus or cameo pro. Thanks for the video pal.
i have no experience with cricut but i can say the cameo is pretty user friendly and easy to navigate
Love how you keep it real, Bro. Appreciate the info.
Sup bro. When I tell you I watch all your videos I mean it dude. I got a job for my kids school doing... you guessed it.. some vinyl decal on the front windows. My little Cricut joy isn’t gonna cut it anymore so I’m upgrading. My question is, can you share a video of you applying a decal to a window? Thank you for all you do
i rarely bring my camera when im out doin installs cuz my clients dont even know i have a youtube channel hahahaahaaa. but if i get a chance to do some decal installs somewhere else. i'll try to record it
@@BigBrandoh no worries my dude I appreciate the response. Thanks for helping all those that are hungry to get that money
Great point double B, years back I had a graphtec and a Roland, now I’m looking to get back into it just for small stuff. I think I’m going to try the cricut first because it can be returned to the store if I don’t like it. If I buy the cameo 4 I would have to return it to cameo if I didn’t like it. Also the cricut is $179, so I’m going for price right now.
This video was funny but was REAL 💯 LOVE IT - STRAIGHT TO THE POINT AND YOU LOWKEY SPEAKING COMMON SENSE 😆👏🏽
Hi Brando I was wondering if the Cameo 3 was better than the silhouette 3? not sure which one to purchase.I only want to create some mugs and infant onesies stuff like that.There is just so many different opinions about each.
Found you recently, been watching nothing but you big dawg! 🙏🏽 would love to see a video of your design process.
dope! thanks for watchin. i got design vids on my channel. i show how i use the pen tool and also taking hand drawings and turning them into digital files. check'em out when you get a chance
I wish I saw this video before I bought my first cutter. Getting a Cameo after having a USCUTTER machine
Thank you I have been trying to decide which brand to get. I’m retired and wanted it for personal use as something to mess with once and awhile. I was considering bigger but agree with your logic. I think the cameo may be the right one for me. Thanks
Hey bro what heat press do you use and what would you recommend for a newbie? I’m trying to purchase asap. I really appreciate it in advance bro.
Can you cut dragon grips with the cameo? It a grip tape used to put on mice, guns, etc.
i have no idea. i just use it for vinyl. if you get one and try it out. let me know how it goes. would be cool to cut some grip tape with it
Good video and explanation bro. Appreciate your video.
Smart. Thank you.
It’s like how I’m never quick to upgrade my computer. I find the best use, is in the long term knowledge of what I have. Not keeping up with the Joneses or having a pudding contest.
I love your work and your content brother! Keep doing your thang!💯
👊🏾💯👊🏾 Thanks for the continued support Marlon!!!!
Brandoh do a video on Stahls new Reflective Heat Transfers.
i probably wont be doin a video on that any time soon. i dont have a need for reflective heat transfers at the moment. i still have some EconoReflect left over from a previous job.
@@BigBrandoh totally understand bro.
Straight forward excellent advise
I like you straight forward and professional 😉
Big brandoh salute 💯...
💯💯💯💯
You got mad skills homie he just likes the way you break shit down ✌
does one of these work better for puff vinyl? or are they the same?
they both work good for puff. they can even cut card stock hahahaa
Cricut air 2 good to start off?need that advice asap,want to do vinyl heat press shirts and stickers.
i dont know, i never used a cricut before. cant say good or bad things about it. i use a cameo
Bro this was Sooooo much help! I appreciated it a lot.
I HAVE A CRICUT... THANKS FOR THIS, I WAS WONDERING DID I MAKE THE RIGHT CHOICE.
Me 2❤️ works for me
I got the cricut cuz it was on sale at Michael's. Tho I did more research and the cameo software is way better in my opinion. I'll be switching soon lol
Well spoken B! I recently got a cameo 4. What's the difference between the cameo and a larger cutter other than maybe pricewise. If it gets the job done that should be good enough. Only downside about cameo for me is the noise it makes when cutting. Thanks again for sharing 👍🏾
So people just think your a online help desk for all these companies? Smh If some of these folks actually go thru your channel the answer is there. After watching the vids the past few months I fully understand why the "Complaint Dept" is thriving. Lol!
hahahahahaaa well said. thanks for understanding how youtube works hahahaa most dont get it hahahahaa
I just got my cameo 4 plus a week ago and been cutting stuff since but i noticed when i want to use the FILL cut option and i already have my cut settings ready to go when i send it to cut it automatically sets the blade depth down to 2..could you shoot me any tips on how to fix that..gracias in advance👊
Just what I needed. Thank you!
Cameo 4 Mr Brando. I just got hit up by a low rider club. How can I promote more G?
Good info Brandoh! I have both and they both can do the job. I think Cricket gets the most publicity because they have been out the longest I think. It also can be said that Cricket items are also sold in Walmart. You cant find Cameo products in Walmart, you have to go to Michael's or your local craft stores. People please remember, RUclipsrs cannot assist you with products they DONOT OWN themselves, and like Brandoh said, why would ANYONE purchase an item just to do a video on it and return the product???? Its pointless imho..Good job Brandoh, keep dropping those jewels!
More than the video the music is so gooood
Naw the cutters are to get to the money... I use Rolands and all... My Silhouette Cameo small convenient and does everything I need it to do besides cutting wider. Truly satisfied
What cutters are compatible with Macs ???
cameo. thats what i use and i use mac too
@@BigBrandoh thank you !
Cam 4 baby💯🖒💰
Very helpful. Thank you.
My lady did her research and bought a Cameo 4. And never uses it.
So i’m gonna use it make decals for id cards
Peace bro I am in Cali for a month looking for some wholesale blank plug in town. Plz DM me some location.
i got video talkin about suppliers in LA. check it out
great advise
Hpn 15x15 sold out
Just subbed from Austin texas
whats up Texas! thanks for watchin
BB💪🏾how do you deal with ppl that say “oh you use HTV?, you should learn sublimation, screen printing, etc”? “You would make more money”This annoys the heck out of me. Esp ppl that aren’t in the T-shirt game so they don’t realize it’s totally different equipment, knowledge, and techniques. What’s your answer to these types of remarks?
He probably says fuck em...🤣🤣
@@taleyap6456 🤣🤣🤣I have been on the verge of saying that, but I know it will come off so harsh🤦🏾♀️
i got vids explaining this but dont let anybody tell you how to run your business. because they have no business in your business. and like Taleya said "Fuck'em" hahahahaaa you should never have to explain your business structure to someone who is not invested in your business. Always do whats best for you and your business.
@@BigBrandoh 💯💯ty
@@brandypeay5350 sometimes you've gotta let a MF know
Team cameo 😊
Cameo has a servo motor, has to do with speed.
I always tell people; "Buy what's in your budget!" And, I also always say; "RESEARCH RESEARCH RESEARCH!"
Buy whatever the f.... works for you!
I still have my Cameo 3, and it gets the job done! I've made ALLOT of money on that little mean "MONEY GREEN" machine.
♡♡♡
Why don’t people get it ? HE USES WHAT WORKS FOR HIM !!! Stop pressing him about other ish and get this FREE game !!
Haha love the cussing it just made me sure you're for real! Thank you for your input. It seems like there's too many options out there
hahahaa. not everybody likes the way i speak. so i appreciate this comment 1,000% hahaaa thanks for watchibn
Yeah getting a cameo . No one is talking about brother scan and cut
HAHAHA
Shit most times I get better quality cuts from my Cameo then the Graphtec and Rolands I use daily... Real Shit
Graphtec make the cameo.
@@iamuglypeople Didn't even know that... I replace more Roland blades then Graphtec... Makes sense
Circut has a App 2 Make Designs on your Phone...Cameo Dosen't..
Can you use AI with the cameo?
yes you can design in AI and then save it as a SVG and open it in the silhouette software to cut.
Cameo for small crafts? Fuck no. Ive actually built logos and designs on this program. Not bashing cricut but 🤣 you cant even use it with no wifi. Cameo made me 10k half a year. A cutters a cutter. Point blank.
Which cameo do you have ?
@@unique4532 i have cameo 4 now but looking in to the 15 inch one.
❤️
Yeah ppl do that type of shit all the time gassing up their favorite cutter/press machines
Why is every other word cussing
JUST GOT A CAMEO 4!!! LETSSGOOO. INSTAGRAM @RAZASHARPAPPAREL