I first started with a Cameo 3 12" cutter (used) then 12 months later got myself Graphtec CE6000-120 wide cutter (used) i made sure that they work as they should get video Guy i truely beleave you are most helpful RUclipsrs out there .
Nice video. I started with a cricut but it seems more suited for arts and crafts. I'm ordering a us cutter sc2 this week. I want to step up to wider vinyl.
Thank you! That’s how we did it, we started with a 15 inch cutter and updated to a 24 inch. Hopefully we’ll be able to upgrade to a digital printer or a bigger Graphtec. Thanks for watching!
How do you like the SC2? I don't know what to get. I was going to get the SC2 but then I was told I should get a servo motor, not a stepper motor. But I am trying to decide between a Saga Servo Contour Vinyl Cutter 720II 28.3" / 24.8" or the Titan 2. Or the sc2. I'm having a hard time choosing my first cutter. I was going to order the MH 871 then I found the SC2. so, I'm stuck between these four options. It will be my first cutter i plan on making decals for cars and wall art. I appreciate any input experienced people might have.
@@user-wf4lr2yd9w unfortunately I've only used it twice since I got it. I didn't need it as much as I thought I did. However it seems to work good. I haven't had any problems out of it.
Small doesn’t always mean cheap. For the same price if not cheaper you can get a uscutter MH series machine for less than $400 . I’ve had a cameo, cricut and now the 34” uscutter.
So true! We want to get our hands on a uscutter one since they are very popular and sound like great machines. You’re more than welcome to share your thoughts on all of those cutters so people can see more opinions about other types of cutters. Thanks for watching!
@@raygangibbs3762depends on the printer but the standard baseline only have cut. There are printers and cutters on their site but the cost is astronomically higher than just a cutter. 😊
Hey Guys great Video, what are you doing when the customer ask you for a big project with digital printing or full wrap design for car? We dont offer that we make only vinyl decal plotts!
Hello! We don’t do full wrappings. Whenever we decide to take on a project that requires digitally printed vinyl, we buy it from a local store. The reason we don’t offer this type of jobs is because of how long it takes to get our printed vinyl.
I've watched a couple of your latest videos where your Graphtec is cutting through the backing paper on the vinyl. Have you checked the cutting strip on the machine to make sure it's not damaged as that could be the problem and not the blade...
When using the Oracal 651 vinyl with the Cameo cutter, I see you are not using a cutting mat. You don’t need a cutting mat for this material? I thought you needed to use a cutting mat for all material. I just bought my Cameo Silhouette 4 PLUS, and I am still learning. What are the cut settings for the Cameo with the Oracal vinyl? Thank you!
Hello! You don’t really need a cutting mat for Oracal 651, right now our settings are blade: 4 cut force: 13 but they have been changing as we use them. I will leave a link to a video where we work on a project and we cover more about the software and other things: ruclips.net/video/-IxeIuWjoGo/видео.html
Most people will start with a small vinyl cutter but bear in mind that the Silhouette is one of if not the loudest cutter out there, so loud you cannot listen to a youtube video or have a conversation while it is cutting. Crrrrr crrrrrr crrr creeeeee crcrcrcrcrcrcrcr crrrrr crrrrr crcrrcrcrcrcrc creeeeee creee creeee creee crrrrr is all you will hear.
I first started with a Cameo 3 12" cutter (used) then 12 months later got myself Graphtec CE6000-120 wide cutter (used) i made sure that they work as they should get video Guy i truely beleave you are most helpful RUclipsrs out there .
Thanks for sharing with us and for your kind words 🙏.
@@RDIdecals praise where praise is due an it is with you Guys😁
I like that you are an honest person. I can totally sense that you are a cool dude!
Thanks a lot for your kind words and support!
Thus was a great presentation! 😃 thank you for sharing this! 😊
Thank you! You’re welcome 🤗!
Get your equipment & materials through uscutter: uscutter.com/?ref=StickerAficionado
TRANSFER ROLLER TAPE:uscutter.com/APPRoller-Tape-Application-Roller/?ref=StickerAficionado
RTAPE CLEARCHOICE AT75: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape/?ref=StickerAficionado
Or through Amazon:
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Siser color guide: amzn.to/3ZuQJ60
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Nice video. I started with a cricut but it seems more suited for arts and crafts. I'm ordering a us cutter sc2 this week. I want to step up to wider vinyl.
Thank you! That’s how we did it, we started with a 15 inch cutter and updated to a 24 inch. Hopefully we’ll be able to upgrade to a digital printer or a bigger Graphtec. Thanks for watching!
How do you like the SC2? I don't know what to get. I was going to get the SC2 but then I was told I should get a servo motor, not a stepper motor. But I am trying to decide between a Saga Servo Contour Vinyl Cutter 720II 28.3" / 24.8" or the Titan 2. Or the sc2. I'm having a hard time choosing my first cutter. I was going to order the MH 871 then I found the SC2. so, I'm stuck between these four options. It will be my first cutter i plan on making decals for cars and wall art. I appreciate any input experienced people might have.
@@user-wf4lr2yd9w unfortunately I've only used it twice since I got it. I didn't need it as much as I thought I did. However it seems to work good. I haven't had any problems out of it.
Small doesn’t always mean cheap. For the same price if not cheaper you can get a uscutter MH series machine for less than $400 . I’ve had a cameo, cricut and now the 34” uscutter.
So true! We want to get our hands on a uscutter one since they are very popular and sound like great machines. You’re more than welcome to share your thoughts on all of those cutters so people can see more opinions about other types of cutters. Thanks for watching!
I agree I started out with a brother design and cut and also moved up to a mh cutter 34" but it only cuts 30
Does the MH have print and cut ?
@@raygangibbs3762depends on the printer but the standard baseline only have cut. There are printers and cutters on their site but the cost is astronomically higher than just a cutter. 😊
How do you like your us cutter?
Hey Guys great Video, what are you doing when the customer ask you for a big project with digital printing or full wrap design for car? We dont offer that we make only vinyl decal plotts!
Hello! We don’t do full wrappings. Whenever we decide to take on a project that requires digitally printed vinyl, we buy it from a local store. The reason we don’t offer this type of jobs is because of how long it takes to get our printed vinyl.
I've watched a couple of your latest videos where your Graphtec is cutting through the backing paper on the vinyl. Have you checked the cutting strip on the machine to make sure it's not damaged as that could be the problem and not the blade...
Why your Oracal 651 says “Orafol” on the core of the roll?
ORACAL is a sub-brand of ORAFOL, a company that manufactures self-adhesive vinyl films for signs, general applications, and more.
what is your website to buy your decals?
I didn't see any link for the corner cutter you used near the end of the video. Do you happen to have a link, or the name, for it please?
You should tag whichever company you wish to sponsor your videos! 😉
Great idea! Though we love the fact that we can control or make any kind of content we want 😅. Thanks for your support!
When using the Oracal 651 vinyl with the Cameo cutter, I see you are not using a cutting mat. You don’t need a cutting mat for this material? I thought you needed to use a cutting mat for all material. I just bought my Cameo Silhouette 4 PLUS, and I am still learning. What are the cut settings for the Cameo with the Oracal vinyl? Thank you!
Hello! You don’t really need a cutting mat for Oracal 651, right now our settings are blade: 4 cut force: 13 but they have been changing as we use them. I will leave a link to a video where we work on a project and we cover more about the software and other things:
ruclips.net/video/-IxeIuWjoGo/видео.html
@@RDIdecalsthe cameo does need a mat, there is a roll option and a mattress option
Most people will start with a small vinyl cutter but bear in mind that the Silhouette is one of if not the loudest cutter out there, so loud you cannot listen to a youtube video or have a conversation while it is cutting. Crrrrr crrrrrr crrr creeeeee crcrcrcrcrcrcrcr crrrrr crrrrr crcrrcrcrcrcrc creeeeee creee creeee creee crrrrr is all you will hear.
Thanks for your honest feedback 😅.
🤣🤣🤣🤣🤣