If anyone is having trouble getting their Mazda 3 into programming mode like I was at first, I discovered that, at least for my car, I had to additionally manually press lock/unlock on the driver's side door at the beginning after you open the door but before the key cycling. Every thing else as explained in this video worked great. Thanks!
Thank you for the video. Quick Tip Suggestion to others: Press UNLOCK button of EACH keyless remote to be programmed twice, SPECIAL NOTE: each as BOTH new and original fob, the original is the one in the ignition, and the new one you want to add, do both SUPER QUICK, otherwise the original will be cut out of the loop and it winds up disconnected and the remote function will stop working. Once that double tap is done on both, the door locks should lock and unlock after each remote is programmed. If door locks do not lock and unlock proceed as follows: Close and open drivers door once, door should lock and unlock twice. If door locks do not lock and unlock, start procedure over with to get back to this same step. BUT REMEMBER to do the double tap of 'unlock' on the ORIGINAL (fob in the ignition) + new one QUICKLY, back to back. so they can both register. I did that to get my original key fob to start working again. Best of luck to whoever is out there!
After viewing other tutorials on how to program a remote, I was having issues with programming the fob. Then after viewing your video, I followed the steps you outlined, and by magic they all now work,lol. Thank you for your tutorial, I look forward to your future reviews.
JB I lost my keyless remote with key. I have a spare key and ordered another keyless remote and followed these instructions. The keyless remote is working. Easy steps. Thanks
Just tried it on my Mazda Miata 2004 and worked perfectly fine. I had just came back from the Mazda dealership and they told me I needed a new key fob ($200-$300) and to program it ($140). So I left and found this video. I tried it with my old key fob and everything worked just fine, good looking brotha!
My wife has the Mazda 2 with the switchblade type of key and I just used your video to reprogram her remote (after the SIL washed the old one in his jeans!). It worked and now she loves me again. Thanks!
Thanks my man - good clear explanation of the process. I'm blind (and yes own a car, but have others drive me around) and I had no problem following your clear instructions. I appreciate you taking the time to make the video.
Thank you, Whitney Automotive!! I tried this 3 or four times with the instructions given in the remote I ordered (exactly the same as yours). I came inside, pulled up RUclips and found your video. Your visual made it much easier to understand. Worked on the 2nd try! And thanks for the door switch info. I never noticed it until this video.
If this video helped save you time or money, please consider tipping the creator by following this link: www.paypal.me/whitneyautorepair OR by clicking the "Support / Donate" button in the top right corner of the Channel Page (PC based). You're support is greatly appreciated!
@@digitalmazda3 The programming procedure in this video is for the keyless entry system. There is a separate chip in the key portion of the switch blade keys that is responsible for communicating with the immobilizer/PATS system to start the car. This is also a programmable system. However, you can not program the key to start the vehicle is you only have one or no working keys. Two functioning and programmed keys are needed to program a third. If you have no working keys, the vehicle will need to be programmed to receive the code in that key be either the dealer or a licensed locksmith. Hope this helps!!
Bought a mazda 2, 2010. The keys weren't working so the trader put new batteries in them - broke one of the clips (delicate) that split the key in half. When i took the car they said only one key works for opening but both work starting. I took the key apart that wasn't working because the light wasn't working, turns out the 2 metal prongs on top of the battery were squashed so i lifted them a little. So now the light works every time but still won't lock/unlock the car. I took the first time plunge and followed you video. And well done and thanks for your help, saved me a ton of cash at the dealers, we're all good. Thanks again.
A little tip if you have a key release button, you don't have to turn the key to the release position each time. Just turning the key from run to the acc position worked for me. I had some issues at first trying to turn it to the release position until I tried it without pushing the key release each time. Just thought I would share in case anyone else was having this problem.
Ray - - You just saved me a hundred dollars or more. I bought a used 2003 Miata and one of the two "fobs" didn't work. I thought it was defective and I was about to order a new one. Then I saw this video. With your clear instructions,, I re-programmed both of them so they now BOTH work great. They "key" - - as you explained - - is that you need to re-program BOTH of them at the same time, not just the "bad" or "new" one. But that was easy with your instructions. Much thanks. Dan
...and just like that, sir, the new remotes are programmed. Thanks for making the RUclips video saving me hundreds. Also, great presentation with little to no detractors (ums, uh’s and others). It shows you know your subject matter. Much success to you.
I've had my RX 8 card type keyless fob since 2009, when I got the car brand new. It never worked correctly. I spent countless hours trying to program it, but now I know it's b/c the dealer in Thousand Oaks, CA never did it. (The manager told me I could program it myself). Thank you for saving me more headaches and time.
Sir you're awesome. My remotes of my 2003 Mazda Miata stopped working a couple of months ago, I new it wasn't the control batteries since it was replaced a month before I did check the car battery and it was ok , I did check every single fuse from inside the car and motor and they were ok, and when I ask Mazda how much to check what was going on they try to charge me over $200 so I decided not to do it since a cheap alarm could be cheaper, And you just solved my problem in less than 5 minutes. Again you rock 🤘and your awesome 😎 thanks for giving us this video.
Awesome video. Easy and fast! My dealer was going to charge me $55 to program the fob. Thanks for saving me $ and for making such an easy to understand video.
Thank you! thank you! thank you!!!! My remote stopped working, so I did the obvious...replaced battery. No luck...dreaded having to buy a new one ($). Thought that maybe I could 'fix' it? That's when I found your video...tried it...and low and behold :D!!! Very grateful. You have some good Karma coming your way!!
I'M GIVING AWAY A CAR!!! I've started posting a new series called Ray's Driveway. Check it out here: ruclips.net/video/3EyCASK8SRY/видео.html This channel has 14,700 subscribers now. If I can get to 50k subscribers, I will GIVE THE PROJECT CAR AWAY TO A SUBSCRIBER WHEN IT IS DONE! Like the videos, comment on them and SUBSCRIBE for your chance to win!
Wow I have 2005 Mazda 3 hatchback I bought on Ebay this keyless remote control for it. I follow your instructions and it work thank you so much man much blessing to you.
Thank You! I thought the battery was dead in my remote but buying a new one did not fix the problem so i did a google seacrh and it ed me to this video my car did exactly what was shown here and my remote works now! it must have gotten un programmed while in my bag due to so many presses. So glad this worked thanks again!
Took me a couple of times to get both keys reprogrammed. No idea why they suddenly failed. But, thanks to your vid I have both remotes working properly. Thanks!
THANK YOU! THANK YOU! THANK YOU! I had to replace the battery on my 2004 Mazda Miata key fob and when that didn't work I came across your video... now both fobs are working perfectly! much appreciated
This was helpful, but not the exact procedure that worked on my 99 Mazda 626 LX 5 speed manual. I tried the same procedure as the video, but to no avail. I started with my door open, and after three ignition cycles ( not starting the car), and three door cycles, I left the door open like in the video. Nothing happened. But, I noticed that as soon as I shut the door after the third cycle, I heard two long beeps. After these beeps I was able to hit the "door open" button on the key fob/remote twice to program the remote. Also, when I found that closing the door at the final step enabled two long beeps and then programming, I noted that the locks did not cycle as in the video ( locks only cycled after unlock pushed on remote). Sorry if this was addressed in any comments previously.
Thank you so much Brother for your informative video. Saved me a lot of headache trying to figure out what was wrong with my remote after an extended period of having the battery disconnected during a timing belt repair. Very much appreciated :) Cheers :)
My car wouldn't go into programming mode. I had to push my key inwards and hold it inwards the whole time to make sure it knew my key was in the ignition. After I did that it worked flawlessly. I've been trying to figure this out for years.
Thanks greatly for this tip. After trying for about 1.5hr this comment matched with what I was experiencing and I was able to get the programming working. I'm sure others who've been experiencing problems is due to this.
Had trouble with it at first. (Made my alarm go off.) but my second attempt worked just like the video. I think I started with my door closed before. Thanks for the Video!
Just donated :) ; saved me so much more. I watched and followed your advise. The only thing different to all other advise is the "open" the door at end before hitting the remote twice. thank you.
Hi, i followed the same procedure and opened the door at the end, but the programed remote won't lock or unlock the drivers door. Can you please shed more light on your experience. Thanks Reginald.
@@reginaldigweike4002 I had no issues, i was setting up second fob. I note that if a car door is not shut properly, the fob will not remote lock or unlock?
@@chinesegambler my car was shut properly and even when inside the car, only the passenger door latch moves to lock and unlock, just to add i have a valet key (no buttons) so trying to add a remote key, could that be where the problem is?
thanks so much for this video .,,even after changing my remote battery ( learned how on your other video lol ) it still was not unlocking the doors ... i programmed it using this video and it now works :)
Thank you very much! I tried it on my friends 2012 Mazda 3i. It didn't unlock the doors when I opened the door the 3rd time. The light on the dash did show it was in programming mode. When I pressed the unlock button on the fob twice it paired with the car. Everything works now. I will be sending a tip via PayPal.
Wow thank you so much, I found that for my mazda 6 I had to physically press the door open/close button 3 times rather that open and closing the door otherwise it failed. Awesome
Ray, Thank you for this detailed and accurate video/tutorial. We were just about to buy a new FOB for my 2001 Miata. Ran the programming routine you explained and it is all perfect. Many Thanks for your time!
Thanks alot! Worked for my mx5 mk2.5 . Replaced the trunk light with some leds and 1 of em was faulty and my 10A fuse died. After i replaced with new one key fob worked for 2 3 days but on the 4th key fob stoped workin. This helped alot :)
@Whitney Automotive, thanks for the video! Really straight-forward. My question is will this work for an aftermarket remote? Or is the procedure different based on the remote? Thanks man!
Do you need more than one key to make it work? I just got my 2011 Mazda 3 and only got one key, and the last owner broke the switchblade remote, and it's held together with electrical tape. The car works, and runs good, but I would like a spare. Had it for two weeks, and the remote never worked, but the key still starts the car.
Thanks heaps, Man. My keyless entry died after my first trip this morning. So I changed the battery in the fob but it still didn't work. I tried the spare key and that didn't work either. I followed your tutorial and both fobs are now locking and unlocking my 2005 Mazda 6 again.
Hi Ray - tried this and everything happened exactly as you said except when I went to click the "unlock" 2x nothing happened. When I started car after - the locks went off/on a couple of times....but still nothing with remote. Any thoughts?
For my 2006 Miata with switchbalde style key. I put in the key that worked for locking/unlocking went through his cycle and had to program each one by one repeating the steps again as I tried to do 2 at the same time and it didn't work for me. Saved my $$$!
Mr. Whitney I have a question, and please forgive me if you covered this already. With the switch blade key, if I perform this procedure does that program the key part also it kny the FOB? I am planning to order to blank switch blade style keys and I wasn't sure if this would do the trick after they have been cut to fit or if something else is needed. Thanks!
If anyone is having trouble getting their Mazda 3 into programming mode like I was at first, I discovered that, at least for my car, I had to additionally manually press lock/unlock on the driver's side door at the beginning after you open the door but before the key cycling. Every thing else as explained in this video worked great. Thanks!
Thank you for the video. Quick Tip Suggestion to others: Press UNLOCK button of EACH keyless remote to be programmed twice, SPECIAL NOTE: each as BOTH new and original fob, the original is the one in the ignition, and the new one you want to add, do both SUPER QUICK, otherwise the original will be cut out of the loop and it winds up disconnected and the remote function will stop working. Once that double tap is done on both, the door locks should lock and unlock after each remote is programmed. If door locks do not lock and unlock proceed as follows:
Close and open drivers door once, door should lock and unlock twice. If door locks do not lock and unlock, start procedure over with to get back to this same step. BUT REMEMBER to do the double tap of 'unlock' on the ORIGINAL (fob in the ignition) + new one QUICKLY, back to back. so they can both register. I did that to get my original key fob to start working again. Best of luck to whoever is out there!
After viewing other tutorials on how to program a remote, I was having issues with programming the fob.
Then after viewing your video, I followed the steps you outlined, and by magic they all now work,lol. Thank you for your tutorial, I look forward to your future reviews.
Is there a way to program a new fob WITHOUT having the actual key?
JB
I lost my keyless remote with key. I have a spare key and ordered another keyless remote and followed these instructions. The keyless remote is working. Easy steps.
Thanks
+Debi Barela I'm happy to help! Please remember to help us by clicking on the "Support Channel" button if you can! Thanks!
Click bait
Thank you, I just canceled a reprogramming appointment- saved $125.00!
Just tried it on my Mazda Miata 2004 and worked perfectly fine. I had just came back from the Mazda dealership and they told me I needed a new key fob ($200-$300) and to program it ($140). So I left and found this video. I tried it with my old key fob and everything worked just fine, good looking brotha!
My wife has the Mazda 2 with the switchblade type of key and I just used your video to reprogram her remote (after the SIL washed the old one in his jeans!). It worked and now she loves me again. Thanks!
Thanks my man - good clear explanation of the process. I'm blind (and yes own a car, but have others drive me around) and I had no problem following your clear instructions. I appreciate you taking the time to make the video.
Thank you, Whitney Automotive!! I tried this 3 or four times with the instructions given in the remote I ordered (exactly the same as yours). I came inside, pulled up RUclips and found your video. Your visual made it much easier to understand. Worked on the 2nd try! And thanks for the door switch info. I never noticed it until this video.
If this video helped save you time or money, please consider tipping the creator by following this link:
www.paypal.me/whitneyautorepair
OR by clicking the "Support / Donate" button in the top right corner of the Channel Page (PC based).
You're support is greatly appreciated!
Help! Lost my switch blade key fob on the slopes snowboarding but I have a spare key fob that unlocks the car but won’t start. Any tips?
@@digitalmazda3 The programming procedure in this video is for the keyless entry system. There is a separate chip in the key portion of the switch blade keys that is responsible for communicating with the immobilizer/PATS system to start the car. This is also a programmable system. However, you can not program the key to start the vehicle is you only have one or no working keys. Two functioning and programmed keys are needed to program a third.
If you have no working keys, the vehicle will need to be programmed to receive the code in that key be either the dealer or a licensed locksmith. Hope this helps!!
I spent 3 days trying to program this . Via written instructions thanks for posting this video ... enjoy the coffee Tip
Will I be able to use a code a universal remote ? If so is there a list of certain remotes thay work?
Bought a mazda 2, 2010. The keys weren't working so the trader put new batteries in them - broke one of the clips (delicate) that split the key in half. When i took the car they said only one key works for opening but both work starting. I took the key apart that wasn't working because the light wasn't working, turns out the 2 metal prongs on top of the battery were squashed so i lifted them a little. So now the light works every time but still won't lock/unlock the car. I took the first time plunge and followed you video. And well done and thanks for your help, saved me a ton of cash at the dealers, we're all good. Thanks again.
A little tip if you have a key release button, you don't have to turn the key to the release position each time. Just turning the key from run to the acc position worked for me. I had some issues at first trying to turn it to the release position until I tried it without pushing the key release each time. Just thought I would share in case anyone else was having this problem.
I have been thinking about that good point!
Ray - - You just saved me a hundred dollars or more. I bought a used 2003 Miata and one of the two "fobs" didn't work. I thought it was defective and I was about to order a new one. Then I saw this video. With your clear instructions,, I re-programmed both of them so they now BOTH work great. They "key" - - as you explained - - is that you need to re-program BOTH of them at the same time, not just the "bad" or "new" one. But that was easy with your instructions. Much thanks. Dan
...and just like that, sir, the new remotes are programmed. Thanks for making the RUclips video saving me hundreds. Also, great presentation with little to no detractors (ums, uh’s and others). It shows you know your subject matter. Much success to you.
My remote lost the connection. I was re-programming by following your instruction and it worked! Thank you so much!!!
I've had my RX 8 card type keyless fob since 2009, when I got the car brand new. It never worked correctly. I spent countless hours trying to program it, but now I know it's b/c the dealer in Thousand Oaks, CA never did it. (The manager told me I could program it myself). Thank you for saving me more headaches and time.
You just saved me 60.00! Mazda was going to charge me 60.00 to do this. Thank you so much!!! 😘
Sir you're awesome.
My remotes of my 2003 Mazda Miata stopped working a couple of months ago, I new it wasn't the control batteries since it was replaced a month before I did check the car battery and it was ok , I did check every single fuse from inside the car and motor and they were ok, and when I ask Mazda how much to check what was going on they try to charge me over $200 so I decided not to do it since a cheap alarm could be cheaper,
And you just solved my problem in less than 5 minutes.
Again you rock 🤘and your awesome 😎 thanks for giving us this video.
Does your key fob for your nb miata have an open trunk button?
@@alx4526 I don't have the car anymore but it did (four buttons 1 lock 🔒, 2 unlocked 🔓, 3 panic 🚨 and 4 the trunk release)
Instructions that came with my replacement remote from ebay where incorrect for my Mazda 323 Protege, your instructions worked 1st time. Cheers mate
We are grateful. Going thru some tough times and you saved us some significant amount of money. Thanks from Texas.
2009 mazda 3 now has a fob programmed for it thanks to this video. Easy instructions did while watching video.THANK YOU
Awesome video. Easy and fast! My dealer was going to charge me $55 to program the fob. Thanks for saving me $ and for making such an easy to understand video.
My local Mazda dealer wanted $95 to re-program my fob (after I changed the battery).
Thank you, thank you, thank you!!! :)
Thank you! thank you! thank you!!!! My remote stopped working, so I did the obvious...replaced battery. No luck...dreaded having to buy a new one ($). Thought that maybe I could 'fix' it? That's when I found your video...tried it...and low and behold :D!!!
Very grateful. You have some good Karma coming your way!!
This is an awesome video. The procedure works on my 2006 Mazda3! Thank you!
Yay! I bought the fobs for my Miata and saw that places were going to charge upwards $200 to program them. Thank you!!
I'M GIVING AWAY A CAR!!! I've started posting a new series called Ray's Driveway. Check it out here: ruclips.net/video/3EyCASK8SRY/видео.html
This channel has 14,700 subscribers now. If I can get to 50k subscribers, I will GIVE THE PROJECT CAR AWAY TO A SUBSCRIBER WHEN IT IS DONE! Like the videos, comment on them and SUBSCRIBE for your chance to win!
Followed your instructions and they worked perfectly. Thanks man, saved me some money. Merry Christmas to you and yours.
Wow I have 2005 Mazda 3 hatchback I bought on Ebay this keyless remote control for it. I follow your instructions and it work thank you so much man much blessing to you.
I followed your instructions and voila!!!!! It worked, I now have a remote for my 2003 Miata! Thank you so much!!!!!
Thank you so much for making this video. It was so clear and informative that I, a 60 yo woman was able to activate my mazda 3 key fob.
What year is your Mazda ? I have a 2012
Thanks man! Worked perfectly on my 2002 Mazda Miata. I changed the battery and it wasn’t working so I found your video and it’s working perfectly!
Thank You! I thought the battery was dead in my remote but buying a new one did not fix the problem so i did a google seacrh and it ed me to this video my car did exactly what was shown here and my remote works now! it must have gotten un programmed while in my bag due to so many presses. So glad this worked thanks again!
My remote didn’t worked 02 miata. After your advice it works like it should!!!thanks bro for making this video
Took me a couple of times to get both keys reprogrammed. No idea why they suddenly failed. But, thanks to your vid I have both remotes working properly. Thanks!
THANK YOU! THANK YOU! THANK YOU! I had to replace the battery on my 2004 Mazda Miata key fob and when that didn't work I came across your video... now both fobs are working perfectly! much appreciated
Happy to help! If there is anything else I can help with feel free to ask!
Thank you so much for this video. It worked and saved me a lot of money. If it doesn’t work at first, keep trying. I’m so pleased with this video
Please come back and make more videos. They are super helpful especially the ones on the rx8
This was helpful, but not the exact procedure that worked on my 99 Mazda 626 LX 5 speed manual. I tried the same procedure as the video, but to no avail. I started with my door open, and after three ignition cycles ( not starting the car), and three door cycles, I left the door open like in the video. Nothing happened. But, I noticed that as soon as I shut the door after the third cycle, I heard two long beeps. After these beeps I was able to hit the "door open" button on the key fob/remote twice to program the remote. Also, when I found that closing the door at the final step enabled two long beeps and then programming, I noted that the locks did not cycle as in the video ( locks only cycled after unlock pushed on remote). Sorry if this was addressed in any comments previously.
Thank you so much Brother for your informative video. Saved me a lot of headache trying to figure out what was wrong with my remote after an extended period of having the battery disconnected during a timing belt repair. Very much appreciated :) Cheers :)
Watched like 3 videos and finally this one worked thanks man. 2012 3 hatchback.
Thank you so much, easy to learn, and you're alot better than other self proclaimed car guru's.
My car wouldn't go into programming mode. I had to push my key inwards and hold it inwards the whole time to make sure it knew my key was in the ignition. After I did that it worked flawlessly. I've been trying to figure this out for years.
Thanks greatly for this tip. After trying for about 1.5hr this comment matched with what I was experiencing and I was able to get the programming working. I'm sure others who've been experiencing problems is due to this.
Had trouble with it at first. (Made my alarm go off.) but my second attempt worked just like the video. I think I started with my door closed before. Thanks for the Video!
Just donated :) ; saved me so much more. I watched and followed your advise. The only thing different to all other advise is the "open" the door at end before hitting the remote twice. thank you.
Hi, i followed the same procedure and opened the door at the end, but the programed remote won't lock or unlock the drivers door. Can you please shed more light on your experience.
Thanks
Reginald.
@@reginaldigweike4002 I had no issues, i was setting up second fob. I note that if a car door is not shut properly, the fob will not remote lock or unlock?
@@chinesegambler my car was shut properly and even when inside the car, only the passenger door latch moves to lock and unlock, just to add i have a valet key (no buttons) so trying to add a remote key, could that be where the problem is?
@@chinesegambler how about the metal key that flips out, does it have a chip in it that is meant to be programed?
thanks so much for this video .,,even after changing my remote battery ( learned how on your other video lol ) it still was not unlocking the doors ... i programmed it using this video and it now works :)
Thank you very much! I tried it on my friends 2012 Mazda 3i. It didn't unlock the doors when I opened the door the 3rd time. The light on the dash did show it was in programming mode. When I pressed the unlock button on the fob twice it paired with the car. Everything works now. I will be sending a tip via PayPal.
Thanks for the upload Ray I followed you're instructions and presto! Fobs are once again working.
Thanks so much for the video! 10yrs ago, this would've cost $100 to be done at a dealership.
Thank you so very much!!!
Saved me from having to goto the dealer!
You are awesome!
Thank you for making it so easy . Even the tire shop folks didn't know how to do it. Maybe I can show them the video lol
Great video... Reprogramed my father in laws car after a battery change and it worked a treat.
Worked for me! The car was a little picky with the rhythm I used, but I got it after two or three tries. Thanks!
Cheers mate, didnt work for my miata but I still appreciate your video :)
Thank you!!! Straight to the point and it worked💯💯
Thank you for the very simple, clear explanation. Makes me feel so good to be able to do this myself!
Wow thank you so much, I found that for my mazda 6 I had to physically press the door open/close button 3 times rather that open and closing the door otherwise it failed. Awesome
Brilliant! This worked great on a 2005 Mazda 3. thank you for sharing this.
Oct 13 2021 this video still works. Thanks for educating me.
It worked to my ‘04 Miata 👍🏻 thank you so much!
Good video and yes, we still drive these good Mazda cars. (2005 Mazda 6 S)
Ray, Thank you for this detailed and accurate video/tutorial. We were just about to buy a new FOB for my 2001 Miata. Ran the programming routine you explained and it is all perfect. Many Thanks for your time!
Worked like a champ
You saved me a TON of money, brother! Thank you!
Worked like a charm on a Mazda 6 remote purchased from eBay. Thank you so much. Tip on the way.
Thanks alot! Worked for my mx5 mk2.5 . Replaced the trunk light with some leds and 1 of em was faulty and my 10A fuse died. After i replaced with new one key fob worked for 2 3 days but on the 4th key fob stoped workin. This helped alot :)
Thank you so much! Worked first time on my new (2nd hand) Mazda 3 😀
Works for my mazda 3 2004. Thank you!
Hey hello
You dont hace any problem at all??
I habe a Mazda 3 2004 and after do the steps nothing happen
@Whitney Automotive, thanks for the video! Really straight-forward. My question is will this work for an aftermarket remote? Or is the procedure different based on the remote? Thanks man!
thank you bro in the mazda dealer 79 dolar for de program , you are the best
Thanks... It worked the first time on my 2006 rx8. Now I need to cut and get chipped
Thank you! I was able to program my remote within minutes because of this!
Thanks so much, so helpful. It worked perfectly on my 2005 Mazda 6!
It worked for me the very first time, thank you
You're awesome man worked on my 2001 NB2 Miata LS trim
Thank you for the simple easy explanation.
You are a doll!! My 2003 Mazda 6 is back to life. Thanks. :))
I was able to program my key. Thank you!
Hey just wanna say thanks a bunch! worked like a charm on my 08 Mazda 3.
Wow that was unbelievable. Thanks mate.👍
Omg wish me luck I’m gonna try it right now!! Thank You
Worked perfectly in Mazda 3 2010. Thanks so much.
Great simple effective instructions. Worked first time Thanks.
Thank you brother, worked perfectly and saved me so much time and money.
Thank you for the video, it is a very clear and concise demonstration. I will go and try it now!
Holy crap it’s this easy ! Some dude was gonna charge me $80 for it !! 👌👍👍👍
Do you need more than one key to make it work? I just got my 2011 Mazda 3 and only got one key, and the last owner broke the switchblade remote, and it's held together with electrical tape. The car works, and runs good, but I would like a spare. Had it for two weeks, and the remote never worked, but the key still starts the car.
good explanation men, works like you showed on my Mazda3 after replacing remote
Thanks heaps, Man. My keyless entry died after my first trip this morning. So I changed the battery in the fob but it still didn't work. I tried the spare key and that didn't work either. I followed your tutorial and both fobs are now locking and unlocking my 2005 Mazda 6 again.
Hi Ray - tried this and everything happened exactly as you said except when I went to click the "unlock" 2x nothing happened. When I started car after - the locks went off/on a couple of times....but still nothing with remote. Any thoughts?
This is the best video ever thanks it work for me i did in at the same time u said off and on off and on and it worked same sequence u did thanks
You're my hero. It worked on my 2011 Mazda3 remote. Thank you. :)
Checked the comments before I tried so it's only fair! It took about three attempts but it worked for my 2013 mazda 6
For my 2006 Miata with switchbalde style key. I put in the key that worked for locking/unlocking went through his cycle and had to program each one by one repeating the steps again as I tried to do 2 at the same time and it didn't work for me. Saved my $$$!
Super Video,für Mazda Premacy Cp TD, 11.2002 hat sich in wenige Sekunden Sehr gut geklappt funktioniert wie vorher. Dankeschön
LG
I'll check it out, and keep you posted. thanks a million.
I have done all of this and does not work. I remember 3 years ago I tried and the locks moved but didn't work either . Any suggestions?
Did you find a solution? I have the same problem
You're asking people to help you... LOL Don't you think some information about the vehicle would be helpful possibly.....
Ugh didnt work for me either!!
Did y'all get working ?
TOP MAN... WON'T SEE U IN SHOP AS IM OTHER SIDE OF THE WORLD - GR8 VIDEO - SORTED ME OUT ON MY MX5 CHEERS
Mr. Whitney I have a question, and please forgive me if you covered this already. With the switch blade key, if I perform this procedure does that program the key part also it kny the FOB? I am planning to order to blank switch blade style keys and I wasn't sure if this would do the trick after they have been cut to fit or if something else is needed. Thanks!
Thank you so much. It worked on the first try.