The best way is to go to technical college or university 2 years like I do in TCAT (Industrial maintenance intagreted automation) it is hand on motor control, mechanical control, PLC level 2 ,Robotics level 2...soo all of it you will learn in 2 years if you want it ...Good look
Sir, I am a fresher 2018 MTECH passout in Control Systems Engineering. I am currently taking Automation training at SMEC labs in hyderabad. They said they will provide assistance in job placements and they give contacts and email addresses of vacancies in any companies and ask to forward our resumes. I have been doing that but I have not received any responses yet. I am almost done with the course. Please guide me. Thank you.
Hi,@@aashieshsen7307 ,do you found out anyting about the institute "Prolific system, Sofcon". What do you suggest, are they good for training and placement?
@@akashgupta4151 also a trainer is not skilled just they will show the equipment how does it work that's it I joined but later on, I realized left it Prolific Thane Mumbai branch I joined
Sir please do provide guidance on same issue , I have searched and found a lot of risk of being looted instead of any future . and some institute will provide PLC and scada knowledge which I had worked already as a maintainer so their is no logic to re do it again and that to in a simulator only , I put my resume on Siemens and Schindler electric company but not really get any kind of response, + I have no friends working in any of these , neither any reference do I have , how can I get it and what are the risks of I really wanted to become specialist in something I like
Hey, Don't loose hope. Tell me how much experience you have. If you are still fresher and want to work in IA, follow the tips which I shared. I have been passed through this type of situation when I was fresher. So keep trying in small company intially. Don't expect direct response from MNC. Except some MNC are hiring from college campus. I would suggest you to start work from small company and learn as much as. Definitely you can have good offer from MNC once you are experienced with 1-2 year. All the best.
Loved the video I’m currently employed at a hvac controls company that test and installs building automation and was wondering if a degree in computer science would help me become successful on the software side?
Hello Sir, I need your help. I've completed 1.5 yrs as a Service Engineer in a Siemens System House. I have knowledge of PLCs, SCADA and HMIs, now I want to go further deep to learn FAIL-SAFE SYSTEMS, OPC, DCS and IIOT. Please suggest a good company.
Hii rajat... Please tell me ki Siemens me job ka kya scene hai.. Kaun sa course beneficial hai... Mai mechanical engineering 2017 me complete kiya aur uske bad kuch mahine QUALITY me kaam kiya
Hello Friend I'm Rajesh instrumentation brach -2018 passed out. I'm completed three months industrial automation course. How I got the service engineering job post. Please suggest me friend. I'm hardly requesting you.
@@AutomationRevolution bro linkdin and lndeed shine all job portel cover by Consultancy. They are offering job via registration charges etc. Koi bhi bina money ke job dene ke liy ready nhi h uske baad bhi job milega ya nhi uski guaranty nhi h
I'm thinking of joining an institute that offers training courses on PLC, SCADA and so on. But what is scope for PLC SCADA in 2019 for getting a job? I mean what advice would you give me for the same? I need help for that.
I'm a student from Assam currently pursuing my B.E in Instrumentation from a Gov. Engineering college. I want to know what kind of tools are required to learn PLC and Scada. How strong my PC should be to do these kind of programming language.
Please.. anyone tell me reviews about Indo German Tool Room, Aurangabad for master certificate course in automation and process control. Should I join there or not.I want to join automation course. Please tell me.
Please its a request reply to. My question. I have done course in plc and panel technician and just started the job now they have given me work of panel wiring is there any scope after this and how much time i work for this company?
Initially you can work for panel work max 6 month. It will help you to understand hard logic. But don't be there for long time. Try to work on PLC, SCADA , DCS.
I am a fresher and belongs to mechanical branch recently i studied siemens,abb,ab,omron plc and Scada,vfd, robotics too so should i learn Siemens DCS also or this is enough for me now can i apply on the basis of this only in industry or i should compulsorily learn DCS..
Hi, As a fresher you don't need to learn DCS but it would be beneficial if you know basics of DCS. But once you get job in process industries You can learn DCS from your work experience.
It depends upon what's your work Profile. If you working as service engineer then you must travel for field work. But you can work for SCADA design Engineer which is office work. But ofcourse without field work you don't get that much knowledge. All the best.
Sir, This video covers the information about institutions which offers PLC courses.I want to do internship sir. I have searched in internet too,but I didn't get any information about it..
Sir I got message from NSIC Hyderabad they said 100 percent placements if I clear there assessment exam and Whn I saw review people said thy got placed so should I join or not Plzzz reply
Hi Vineet, I don't think any institute can make 100% placement in current situation. Don't think which institute is giving placement First, Rather see which institute is giving good training. Some institute have settlement which small organisation and they will hire you will very less salary say 6-7 k and they will say we did your placement. So please check everything what I said in video.
Sorry , I don't have details of Softcon but you can review from social media and internet. Take a demo from there and judge based on what I said in this video.
Yes, but mostly this job is field related job. You need to work in remote area or in critical condition where your site is. So it's not pure while coller job. If you are interested in this type of job, to definitely you can have bright future. All the best ,🙂
It's really hard to get automation job for a mechanical engineer until he has some good reference bcz no company shortlist them as they are from mechanical background
Sir I have 3 years gap my friend is working for a company and management have training institute also My friend helpes to get job and training in that but basic sal is 10k give me your suggestion also
Thank you your videos ther are very helpful to me and students like me who are coming into this industry
TnQ so much for making this vidio... 🙏 🙏👌
The best way is to go to technical college or university 2 years like I do in TCAT (Industrial maintenance intagreted automation) it is hand on motor control, mechanical control, PLC level 2 ,Robotics level 2...soo all of it you will learn in 2 years if you want it ...Good look
Nice bhai keep it going on bro....thank you so much
Sir, I am a fresher 2018 MTECH passout in Control Systems Engineering. I am currently taking Automation training at SMEC labs in hyderabad. They said they will provide assistance in job placements and they give contacts and email addresses of vacancies in any companies and ask to forward our resumes. I have been doing that but I have not received any responses yet. I am almost done with the course. Please guide me. Thank you.
Hi, Please don't be upset and follow my instructions which I shown in this video. Keep trying is the only option.
Could you please recommend the institute to learn IA?
What about the prolific system, sofcon, IPCS
Hi,@@aashieshsen7307 ,do you found out anyting about the institute "Prolific system, Sofcon". What do you suggest, are they good for training and placement?
@@akashgupta4151 also a trainer is not skilled just they will show the equipment how does it work that's it
I joined but later on, I realized left it
Prolific Thane Mumbai branch I joined
Sir please do provide guidance on same issue , I have searched and found a lot of risk of being looted instead of any future . and some institute will provide PLC and scada knowledge which I had worked already as a maintainer so their is no logic to re do it again and that to in a simulator only ,
I put my resume on Siemens and Schindler electric company but not really get any kind of response, + I have no friends working in any of these , neither any reference do I have , how can I get it and what are the risks of I really wanted to become specialist in something I like
Hey, Don't loose hope. Tell me how much experience you have. If you are still fresher and want to work in IA, follow the tips which I shared. I have been passed through this type of situation when I was fresher. So keep trying in small company intially. Don't expect direct response from MNC. Except some MNC are hiring from college campus. I would suggest you to start work from small company and learn as much as. Definitely you can have good offer from MNC once you are experienced with 1-2 year. All the best.
Loved the video I’m currently employed at a hvac controls company that test and installs building automation and was wondering if a degree in computer science would help me become successful on the software side?
Hello Sir, I need your help.
I've completed 1.5 yrs as a Service Engineer in a Siemens System House.
I have knowledge of PLCs, SCADA and HMIs, now I want to go further deep to learn FAIL-SAFE SYSTEMS, OPC, DCS and IIOT. Please suggest a good company.
Try to apply from LinkedIn & Indeed where you will get many options.
Hii rajat... Please tell me ki Siemens me job ka kya scene hai..
Kaun sa course beneficial hai... Mai mechanical engineering 2017 me complete kiya aur uske bad kuch mahine QUALITY me kaam kiya
Hello Friend I'm Rajesh instrumentation brach -2018 passed out. I'm completed three months industrial automation course. How I got the service engineering job post. Please suggest me friend. I'm hardly requesting you.
@@AutomationRevolution bro linkdin and lndeed shine all job portel cover by Consultancy.
They are offering job via registration charges etc. Koi bhi bina money ke job dene ke liy ready nhi h uske baad bhi job milega ya nhi uski guaranty nhi h
I'm thinking of joining an institute that offers training courses on PLC, SCADA and so on. But what is scope for PLC SCADA in 2019 for getting a job? I mean what advice would you give me for the same? I need help for that.
there is a great scope for automation thus plc ,dcs etc. U better get strong with your core branch basics which u have to reflect in the interview
I'm a student from Assam currently pursuing my B.E in Instrumentation from a Gov. Engineering college.
I want to know what kind of tools are required to learn PLC and Scada.
How strong my PC should be to do these kind of programming language.
Learn PLC, SCADA first and you can use any trial version software or PLC simulator for practice.
Please.. anyone tell me reviews about Indo German Tool Room, Aurangabad for master certificate course in automation and process control. Should I join there or not.I want to join automation course. Please tell me.
Please its a request reply to. My question. I have done course in plc and panel technician and just started the job now they have given me work of panel wiring is there any scope after this and how much time i work for this company?
Initially you can work for panel work max 6 month. It will help you to understand hard logic. But don't be there for long time. Try to work on PLC, SCADA , DCS.
@@AutomationRevolution thanx for reply
I am a fresher and belongs to mechanical branch recently i studied siemens,abb,ab,omron plc and Scada,vfd, robotics too so should i learn Siemens DCS also or this is enough for me now can i apply on the basis of this only in industry or i should compulsorily learn DCS..
Hi, As a fresher you don't need to learn DCS but it would be beneficial if you know basics of DCS. But once you get job in process industries You can learn DCS from your work experience.
Husain bhai.... please provide your contact number....
Hi bro
Hi bro
PLC to HMI and PLC to Scada Communication with some process sir.....
Is PLC SCADA a good option of career for girls? Does it involve lots of field work or travelling and all?
It depends upon what's your work Profile. If you working as service engineer then you must travel for field work. But you can work for SCADA design Engineer which is office work. But ofcourse without field work you don't get that much knowledge. All the best.
@@AutomationRevolution Thank you so much Sir.
Sir being an mechanical engineer and currently working as maintenance engineer. Hows the job prospects in plc??
Kha kam kr rhe ho maintenance engineer mujhe bhi btao
Sir please tell me your review about IGTR Aurangabad and MPTA education ltd Pune...
I want to do master in industrial automation . Pls help me..
Hello sir.. can you provide feedback on Prolific Technologies and its placement scenario? They have one training centre at Vadodara.
Hi Chirag, I don't have details of Prolific Institute but pls check it's review from Ex students and visit once there, take a demo and then decide.
Hi, Chirag Chawda ,do you found out anyting about the institute "Prolific system"? What do you suggest, are they good for training and placement?
Hii chirag u r join profolic pl. Tell ur suggestion am also interested in this course pl. Reply
sir u said that in gujarath and in some other places Siemens give free training can any people from any state take training from that institute ?
Yes, For other states students they can charge nominal fee.
Sir,I know the basics of plc programming.I would like to do internship in industries.where should i get the opportunity?will you please tell me sir..
This video is the answer which I covered from all prospective.
Sir, This video covers the information about institutions which offers PLC courses.I want to do internship sir. I have searched in internet too,but I didn't get any information about it..
Sir I got message from NSIC Hyderabad they said 100 percent placements if I clear there assessment exam and Whn I saw review people said thy got placed so should I join or not Plzzz reply
Hi Vineet, I don't think any institute can make 100% placement in current situation. Don't think which institute is giving placement First, Rather see which institute is giving good training. Some institute have settlement which small organisation and they will hire you will very less salary say 6-7 k and they will say we did your placement. So please check everything what I said in video.
sir, it's request please sugest me some good coaching institute for automation in banglore.
for automation, you better join just engineering in Pune
@@parashualamel6104 plz suggest me best PLC class in pune
@@parashualamel6104 How is just engineering? Does it provide good placements.
@@parashualamel6104 Is this in pune?
@@mahima889 for more info contact me through this no 8073589983 bcz smngs I can't text in here .
Sir can you suggest me best institute for industrial automation in india
In West Bengal where to go ?Please help me
I want lab manual for iA subject for diploma 6th sem
Software downloading problems....sir....?
Which software , Give me specific details.
TIA Portal Sir...
Thanks for your reply....
Sir is Sofcon a good institute for IA training ?
Sorry , I don't have details of Softcon but you can review from social media and internet. Take a demo from there and judge based on what I said in this video.
Automation Revolution thank u for ur reply sir
As compare to sofcon aeab Pvt Ltd is better I am doing training there
nawaz hussain thank u
Can computer engineers get into it as well?
Yes, but mostly this job is field related job. You need to work in remote area or in critical condition where your site is. So it's not pure while coller job. If you are interested in this type of job, to definitely you can have bright future. All the best ,🙂
Why are u leaving computer stream...??
It is not at all a good option to leave computer stream...think again
Can a mechanical engineer become automation engineer? And in which part of automation a mechanical engineer can work?
It's really hard to get automation job for a mechanical engineer until he has some good reference bcz no company shortlist them as they are from mechanical background
Sir I have 3 years gap my friend is working for a company and management have training institute also
My friend helpes to get job and training in that but basic sal is 10k give me your suggestion also
If you don't have any job then start from this job and later on you can switch once you get better option.
thanks sir
thanks Mr
Your views on industrial IoT ?
Will share video soon on IIOT.