i know im asking the wrong place but does someone know of a tool to log back into an instagram account..? I was dumb forgot the password. I love any help you can offer me.
@Roy Bradley i really appreciate your reply. I got to the site through google and Im in the hacking process atm. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
Excellent video ,, Excellent trailer and the trailer that I am in need of. Can I get a price on this bad boy? I’m in the market for this exact size trailer. It has everything that I want except D rings. I would like approximately 8 D rings per side on the side between the rub rail. I’m a new subscriber and I liked this video. Keep them coming.
Most air ride systems, you can dump the air bags to get a (even better) loading angle. Is this / can you dump the air from both axles to the better load angle on this suspension?
Hey David, they do not offer a “dump valve” to let all the air out at once, but you can manually let the air out of the tank if you needed the deck a little lower.
There is a leveling valve underneath on the rear tandem. Have to crawl under the trailer and disconnect it to dump air. Difficult to do, but very helpful to reduce the loading angle. It drops the trailer 3 to 4 inches down onto the bumpstops. I do it frequently and it helps. Needs a dump valve in convenient location. Are you listening Diamond C? Seriously great trailer. Mine is also a 44 ft. Beware of length laws. These are only legal behind a cab n chassis if over 65 ft. Cab n chassis makes it a tractor trailer and let's you go to 75 ft. Overall length.
Slide ratchets force the boxes in-board ..Interesting I was wondering why they looked so far in on this trailer. Personally this is a big detail that would have annoyed me as a buyer. I like the gas struts on the front and top storage. details are good, and keeps from hitting your head in the wind. Are all the batteries connected to each other? Or completely separate. While I like having a battery at the high load device VS far away, I feel they should be connected so they can help each other and is easier to maintain a state of charge. Not sure how much power will come from the truck to charge while driving. Using Winches in off-roading I know they have a big power draw. Honestly would almost rather see 4 6v in series/parallel combination in one box near the front, then the Pump and Air boxes with big wire up to the winch. Easy to run air lines and hoses, and would make charging and maintain the batteries a bit easier in 1 location vs 3 locations. Love the 40k front hitch = quality to me. On the Hydro valve in that box do you have to move it to drive the jacks VS the tail? or is it automatic? or did I misunderstand. Love the steps down the side. And a Big Shout out and LOVE that you and your camera person took time to show us around the trailer I learned a BUNCH about Diamond C and Elm City!!!
The slide ratchets on the same side as the underbody boxes is a bad way to order these trailers if you have a load and strapped down into place and you need to get into your boxes you have to unbind your load and move the slide ratchets to access the boxes
Hi Michael, The slide track is available on either side, or both. The customer had specific uses in mind and ordered it the way he wanted it. But thanks for the thought!
I have a 2015 with the shorter Dove and the block you pull in and out. The dove flops quite a bit without anything on it. Is this the case with the new can system? Just put in my order for a 40' Fmax216.
Agreed, not sure why the hoses need to be in the box, I suspect I would move those But most of my chain would be top side. I suspect I would move the batteries around as well 3 locations to maintain I suspect would bug me.
So Jesus is coming sooner then we think by looking at world events. here is the salvation prayer for those who are not saved .pray this with your kids so u know that they are saved and everyone you know. Jesus is coming quickly Dear Jesus Come into my heart, forgive me of my sins, wash me, cleanse me, set me free Jesus, right now I receive you as my lord and savior. I believe you are the son of God and you were raised from the dead, thank for saving me and forgiving me, I am born again. I am forgiven and I am on my way to heaven because I have Jesus in my heart. Amen u yu
You can build a trailer to your specs on the Diamond C web site, then send it to us for pricing, or just just call us and we can do it for you. 203-535-0075. Thank you!
@@uprisingengineeringusa5031 That's a loaded question these days. The factory is so backed up because those of us who want to work are working. So, I have orders out until the last 1/4. So a a real estimate is possibly the last quarter (Oct-Dec) or first 1/4. (Jan-March). I wish I could get them quicker, but since our lots are so empty, we keep taking deposits on units before they come. So it's tough to build any inventory. If/when you're ready, just call me. Sometimes someone will cancel because they find something used or just can't wait, and then their spot opens up. Thanks. 203-535-0075.,
I don't think it is unreasonable to ask a range. the issue is you say a price and people assume there are all that price but not notice the feature or add on. This trailer for sure has a BUNCH of options. tail, hydro jack, winch, 44 feet, extra lights, 16k axles... not many options not checked, might be 15-20k worth of options. so if its over your budget you might write off a manufacture that actually has an options that fits your needs budget.
It would msrp for probably between 48-49k, did a build similar myself. And I know in Washington and Nevada I can get it for about 38-39k. Price is all in the dealer.
Hey Robert, you can call the shop and ask one of our guys to price something for you. Or better yet, jump on the diamond C website and build your trailer, when you get to the end of the options you can put our zip code in to send the quote to one of our guys and they will email you a price in return!
@@elmcitytrailer4209 we don’t wanna spend an hour to find out it’s way more than what we want to spend on something that won’t last 4 years. Just say the damn price
@@RedskinzFan This trailers is easily over $ 30K after specing out a PJ Hydraulic dove hotshot type trailer with a 30K GVWR....price was $35K... With that being said, Dimond C is a much more premium brand name..>$$$
Great demo of an awesome trailer!
i know im asking the wrong place but does someone know of a tool to log back into an instagram account..?
I was dumb forgot the password. I love any help you can offer me.
@Eugene Javion Instablaster =)
@Roy Bradley i really appreciate your reply. I got to the site through google and Im in the hacking process atm.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
@Roy Bradley It worked and I now got access to my account again. Im so happy!
Thank you so much, you saved my ass!
@Eugene Javion you are welcome =)
Excellent video ,, Excellent trailer and the trailer that I am in need of. Can I get a price on this bad boy? I’m in the market for this exact size trailer. It has everything that I want except D rings. I would like approximately 8 D rings per side on the side between the rub rail. I’m a new subscriber and I liked this video. Keep them coming.
Most air ride systems, you can dump the air bags to get a (even better) loading angle. Is this / can you dump the air from both axles to the better load angle on this suspension?
Hey David, they do not offer a “dump valve” to let all the air out at once, but you can manually let the air out of the tank if you needed the deck a little lower.
Or raise the front end Higher by using the hydraulic jacks to obtain a better loading angle
There is a leveling valve underneath on the rear tandem. Have to crawl under the trailer and disconnect it to dump air. Difficult to do, but very helpful to reduce the loading angle. It drops the trailer 3 to 4 inches down onto the bumpstops. I do it frequently and it helps. Needs a dump valve in convenient location. Are you listening Diamond C? Seriously great trailer. Mine is also a 44 ft. Beware of length laws. These are only legal behind a cab n chassis if over 65 ft. Cab n chassis makes it a tractor trailer and let's you go to 75 ft. Overall length.
Slide ratchets force the boxes in-board ..Interesting I was wondering why they looked so far in on this trailer. Personally this is a big detail that would have annoyed me as a buyer.
I like the gas struts on the front and top storage. details are good, and keeps from hitting your head in the wind.
Are all the batteries connected to each other? Or completely separate. While I like having a battery at the high load device VS far away, I feel they should be connected so they can help each other and is easier to maintain a state of charge. Not sure how much power will come from the truck to charge while driving. Using Winches in off-roading I know they have a big power draw. Honestly would almost rather see 4 6v in series/parallel combination in one box near the front, then the Pump and Air boxes with big wire up to the winch. Easy to run air lines and hoses, and would make charging and maintain the batteries a bit easier in 1 location vs 3 locations.
Love the 40k front hitch = quality to me.
On the Hydro valve in that box do you have to move it to drive the jacks VS the tail? or is it automatic? or did I misunderstand.
Love the steps down the side.
And a Big Shout out and LOVE that you and your camera person took time to show us around the trailer I learned a BUNCH about Diamond C and Elm City!!!
You're my boy Blue!
Sweet trailer
How do you like those Atlas hydraulic jacks?
Nice how much is that particular set up
Wats the price
Around $30,000+
I’d say around 50 or 60, I built one on there website with most those features and it came out to like 55
I believe this one sold in the $37K range. But that was before price increases.
What's the weight on this trailer?
Where is this trailer located
Nice trailer but its a fail w/o disc brakes on all 4's.
The slide ratchets on the same side as the underbody boxes is a bad way to order these trailers if you have a load and strapped down into place and you need to get into your boxes you have to unbind your load and move the slide ratchets to access the boxes
Hi Michael, The slide track is available on either side, or both. The customer had specific uses in mind and ordered it the way he wanted it. But thanks for the thought!
With cdl how much weight I can put in that trailer!!!
I have a 2015 with the shorter Dove and the block you pull in and out. The dove flops quite a bit without anything on it. Is this the case with the new can system? Just put in my order for a 40' Fmax216.
Did you get a new trailer yet? Does it flop around? As a guess the Diamond C is locked in with the cylinders
I like this trailer but can easily live without the air ride. Is that an option?
yes air ride is an option. knocks 10k off. this trailer msrp is 70k
Yeah put the hydraulic block with the lines in the tool box so when you grab a binder or bungee you can rip off a hydraulic line.
Agreed, not sure why the hoses need to be in the box, I suspect I would move those But most of my chain would be top side.
I suspect I would move the batteries around as well 3 locations to maintain I suspect would bug me.
@@davez2989 This is very suspect.
All that neck for a bolted in receiver??
With the 16 thousand pounds axels what is the total carrying weight of this trailer?
That unit has the 40,000 LB package, and weighs in at 9,300 LBS. So 30,700 LBS capacity.
Nice!
will the batteries charge off of the truck while its running?
Yes. Mine do, same trailer.
Well its not light weight at 11k, whats the retail price?
What is the spacing on crossmembers for this trailer? 12” or less?
It was ordered with 12" O/C. Standard would have been 16".
How much is that trailer set up like that but black and oak floor
What is price
How much
Any in stock?
Top 👍
Am I not the only one annoyed by how the winch looks off centered ? 😂
lol I understand the OCD struggle! It is off center because the battery has to sit next to it in that size box.
That is a very heavy duty trailer. I'll be ordering one very soon.
💰?
Andrew Asselin give us a call 203-535-0075, thanks!
So Jesus is coming sooner then we think by looking at world events. here is the salvation prayer for those who are not saved .pray this with your kids so u know that they are saved and everyone you know. Jesus is coming quickly
Dear Jesus
Come into my heart, forgive me of my sins, wash me, cleanse me, set me free Jesus, right now I receive you as my lord and savior.
I believe you are the son of God and you were raised from the dead, thank for saving me and forgiving me, I am born again. I am forgiven and I am on my way to heaven because I have Jesus in my heart.
Amen u yu
What is the weight of it
9,300 LBS
How can I order one?
You can build a trailer to your specs on the Diamond C web site, then send it to us for pricing, or just just call us and we can do it for you. 203-535-0075. Thank you!
@@robertfantarella7322 ok I call around 12ish.
Why does every trailer manufacturer never talk about trailer weight? How much does the damn thing weigh?
Hi Brian, with all the options this unit weighs out at 9,300 LBS. (Damn it! LOL)
@@robertfantarella7322 lol. I love the reply!! Down to earth guy. I am extremely interested in this trailer. How long to build one?
@@uprisingengineeringusa5031 That's a loaded question these days. The factory is so backed up because those of us who want to work are working. So, I have orders out until the last 1/4. So a a real estimate is possibly the last quarter (Oct-Dec) or first 1/4. (Jan-March). I wish I could get them quicker, but since our lots are so empty, we keep taking deposits on units before they come. So it's tough to build any inventory. If/when you're ready, just call me. Sometimes someone will cancel because they find something used or just can't wait, and then their spot opens up. Thanks. 203-535-0075.,
@@robertfantarella7322 ok good to know. My business partner and i will give you a call real soon
What’s the total weight?
11,000 lbs
Pongan precios
If you have to ask how much, then you cant afford it, im just guessing here but in the 35k range.
Try more like 50k
@@jlc2transport308 damn.
I don't think it is unreasonable to ask a range. the issue is you say a price and people assume there are all that price but not notice the feature or add on. This trailer for sure has a BUNCH of options. tail, hydro jack, winch, 44 feet, extra lights, 16k axles... not many options not checked, might be 15-20k worth of options. so if its over your budget you might write off a manufacture that actually has an options that fits your needs budget.
What’s the price. Got to be around $47,000
It would msrp for probably between 48-49k, did a build similar myself. And I know in Washington and Nevada I can get it for about 38-39k. Price is all in the dealer.
How much$$$????
Hey Robert, you can call the shop and ask one of our guys to price something for you. Or better yet, jump on the diamond C website and build your trailer, when you get to the end of the options you can put our zip code in to send the quote to one of our guys and they will email you a price in return!
@@elmcitytrailer4209
Will do. Thank you.
@@elmcitytrailer4209 we don’t wanna spend an hour to find out it’s way more than what we want to spend on something that won’t last 4 years. Just say the damn price
@@RedskinzFan This trailers is easily over $ 30K after specing out a PJ Hydraulic dove hotshot type trailer with a 30K GVWR....price was $35K... With that being said, Dimond C is a much more premium brand name..>$$$
@@RedskinzFan 👍🤭🤣
$ please let’s
All that money. All those options. And he didn’t spec disc brakes 😞
Wayyyyy too much shit to go wrong. I see numerous items that could KILL A load if they malfunction. Gorgeous trailer though.
They said that when they invented trucks, too! lol...
@@robertfantarella7322 don’t really get the point your making.
@@RedskinzFan cause he doesn’t pull a trailer but one day a year...I always believe in the Kiss Moto
@@robertfantarella7322 and that's what many people are still saying about EGR and DEF on newer trucks.😉
Can this carry my x wife?
How much
Give a call: 203-535-0075. Thank you, Bobby
How much