What Does Aux 1 Do? | Audio Mixer Aux Output Setup
HTML-код
- Опубликовано: 30 июл 2024
- In this video, we show you everything you need to know about an aux send/output on your audio mixer. Whether you're a budding audio engineer, a live sound enthusiast, or simply someone curious about how sound is crafted, this video is for you!
PRICING FOR EQUIPMENT FEATURED IN THIS VIDEO:
► Yamaha MG12XU Mixer: currentprice.io/mg12xu
► Neat King Bee II Microphone: currentprice.io/king_bee_ii
► Beyerdynamic DT990 Pro Headphones: currentprice.io/beyer_dt_990
► XLR Cable: currentprice.io/xlr_cable
► TRS Cable: currentprice.io/trs_cable
► Mic Stand: currentprice.io/desk_stand
► Rode PSA1+ Boom Arm: currentprice.io/psa1_plus
► Quality Acoustic Treatment Panels: currentprice.io/soundpanels
These are affiliate links, and I may earn a commission from Amazon (and others) on qualifying purchases.
BLOG POST WITH MORE INFORMATION:
►
XLR CABLE BUYER'S GUIDE: kettnercreative.com/buyers-gu...
BEST SETUP FOR 4 PERSON PODCAST: kettnercreative.com/audio-mix...
CHAPTERS:
0:00 - Introduction
0:30 - What Does An Aux Output Do?
0:45 - When To Use An Aux Output?
1:43 - Where Do You Find An Aux Output?
2:46 - Two Types of Aux Outputs
2:56 - Post-Fader Auxillary Output
4:14 - Pre-Fader Auxillary Output
5:17 - Audio Mixer Insert
6:00 - How To Use An Auxillary Output
7:10 - Main Aux Output
7:54 - Final Thoughts
BECOME A MEMBER OF OUR CHANNEL FOR PERKS & EXCLUSIVES:
/ @kettnercreative
STUDIO EQUIPMENT:
Editing Computer: currentprice.io/16_mpb_m1max
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
B-Roll Gimbal: currentprice.io/dji_om4
Lav Mic: currentprice.io/deity_wlav_p
Lav Recorder: currentprice.io/tascam_dr10l
Headphones: currentprice.io/beyer_dt_990
Studio Monitors: currentprice.io/hs5_monitor
Video Recorder: currentprice.io/ninja_v
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
External Monitor: currentprice.io/lg_32in_4k
SOFTWARE & TOOLS:
Final Cut Pro: geni.us/qW5K
MotionVFX Plugins: geni.us/5SFH6w
Affinity Photo: geni.us/86RLOhZ
Epidemic Sound: geni.us/eiPf1G
Envato Elements: geni.us/ENFErA
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.
All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.
Copyright: 2024 Kettner Creative Inc., All Rights Reserved. 
Кино
Man…you’re really good at explaining this stuff, especially for people who use some of this gear a little bit don’t understand it’s full functionality. I never really understood pre/postfaders till now. Thanks a lot 👍
I always enjoy and appreciate your videos at the same time. Calm, informative, no bullshit. Thank you.
Great info! May you not get tired of sharing your knowledge about the sound system and how things are done properly. Thank you and please continue in your good deed.
That great brother 🎉🎉🎉 most likely I used the auxiliary for reverb and delay separating for vocal on analog mixers, but on the digital is totally different ❤❤❤
I run an Aux channel for people on the phone line, and another to Skype/Zoom in the computer, both with MinusMix for their input slider.
Always helpful. Thank you.
Awesome videos my friend - thanks a lot.
Very clear explanation
Great video
Thank you very much!
well explained, Kudos sir
good stuff man.. thanks
Nice!!! Do you have a video on how to connect amps to the mixer using the aux input?
Very informative. Although I didn't understand how exactly to connect an effects unit (eg, reverb/delay) to my vocalists. I understand the Aux out and the Aux mix control, but how do I get vocals to go to the efx unit and then return?
I connected yesterday a Zoom H6 via 1/4” cable on both ends to a mixing board, I connected it to an Aux and my final recording was pretty bad. I could barely hear the instruments and the vocals sounded at a distance. I activated the -20db pad on the Zoom. Those aux outputs were used for headphones, but the sound tech told me that I could use them. I am not sure what happened.
I run my subs through the aux channels for separate volume control when I do that should I leave the aux 1’s pre fade off and on post so that it matches the aux 2 volume
Hi Jordon
We have the Yam Mg12Xu and use for vocals and guitar , what is the best way to use so vocals and guitar can have own controls into the monitor so the guitar doesn’t owner power the vocal , we just have the one floor monitor we both share
With this mixer You’re saying to run external Effects you have to commit another channel to just effects return (AUX2)?
Does subwoofer sounds better when fed through Aux send from a Mixer?
I have the Yamaha mg12XU!If I want to run my subwoofers separately and use the aux send,how should I plug my two subwoofers?
can i use the aux output for connecting my audio interface
Hi sir please Yamaha mG12xu full review explain ❤ I'm waiting
Hi, great channel, recently subbed. I purchased the Yamaha MG10XU for a live show that we will be taking on the road. I’m new to the audio mixing space. Your videos on this mixer have been most helpful, thank you. Question - I need to take two line outs from the mixer. One is to send the mix to an Atem Extreme for the livestream. The 2nd line out is to feed a house audio system. What are your recommendations for achieving this? Thanks in advance.
I would use a 1/8" TRS to dual 1/4" TS cable (currentprice.io/14_to_dual_18) to go from your stereo outputs into your ATEM. Then send the XLR inputs to the house sound system.
How to connect aux in djm pioneer 350 for streaming video what I need
Awesome video on using the Aux! Firstly a massive thanks to Kettner Creative, it's thanks to you that I know how to use my MG12XU mixer. One question though, if I wanted to have multiple monitors with different mixes controlled by Aux1 would that be possible, or would I have to use aux2 for a separate mix and be limited to two monitor mixes? Thanks again for all the useful content!
You have to use a separate aux for each mix
This is off subject But I want to know how to connect Dante adapter to my mg 12xu
Aux Output .. what Kind Needed ? .. Is It MonoTS or Stereo TRS ?
Wait, how do you use aux send on a Livestream?
Thanks
Thank you so much!
I can’t get a good sound when recording acoustic drum with the mackie profx16v3
The aux output is mono. How can you convert it to stereo in order for your earphones to work left and right. ?
You would need to use two aux channels if you need stereo.
@@kettnercreative2 mono ts to stereo trs? Thanks for the reply
yes, where is the return input after you sent the audio through the send output?
You can connect it to any input channel on your audio mixer that you want.
@@kettnercreative i see. But i wont have the "traditional" control over its amount per channel, only for all channels simultaneously?
What about stereo aux output ? Wouldn’t you have to use both aux one and two? Then you lose pre or post option. Why is it so elusive to find a budget mixer with 16 aux mono / 8 aux stereo outputs for iem mixes.😂 they seem to cost the earth.
Most people looking for 8 stereo monitors would have an input list with more than 48 inputs. This would easily put you in the territory of a full scale digital setup.
So Aux the Pre-Fader function means I can have different output besides the Main output? That means I can control the Aux volume separately from the Fader and not effecting the Main output, right?
Exactly
ein paar beispiele wären gut gewesen
First!
Aha, nice.
Много пустой болтовни....урок ничему не учит.