Thank you for all the information you provide on your channel! I’m new to welding, and your videos help so much with trying to choose the right tools to start out with.
Hope your unit last more then a year without letting you down. Had the 215. Shorted out when using the spoolgun to weld aluminum. Upgraded to the 220. Printed circuit board went out one year after using it. Fixed under warranty. ($1,700 repair) 1.5 years later, the connection for the tig torch started arcing yesterday. Now the lcd screen wont come on. Miller says no more warranty. Take it to a repair center. No troubleshooting, no way to fix it, nor any reason why it failed from technical support. As a self-employed welder, this blue box is how I feed my family and pay my bills. Both the 215 and 220 have let me down 3 times now. These machines are not made for longevity. Good luck with yours.
This machine is designed for a shop or home application to fit in where say a 252 would. Allowing a higher duty cycle and only 220 power. The ability to add a variety of Spoolguns is a good aluminum solution and it comes standard with the MDX-250 gun making it a bit more industrial than say a 215 or 220. The AC capability is great but it puts the machine out of the price range for many shops!
@@barnycanuck6234 It is actually a new machine from Miller. If you have any questions let us know. They have a few other machines in this category too but this is the newest.
I'm looking for one that I can take it out in the field hook up to 225 lincoln im running. I get in situations where I need mig instead of stick. I like suitcase's too. Mayb u can help me out what kind suitcase I should get.. thnx
Have you guys ran this welder. I orderd from you. Mine will be at my door Monday looking forward to running it. Have a tooth shank to weld on bucket and some trailer work right away
We have we have used in a few videos and projects around the shop. We like it. We have 220 power and like the MDX 250 gun! Let us know how you like it!
None of the Miller Multiprocess will do 6010 well. They will do 7018. ESAB units run 6010. A really reasonable STICK unit would be the Rogue or multiprocess check out the Rebels! Thanks for watching!
Hola como esta ?Nesecito una soldadora de ⛽ numero 225 soldar con electrode que precio tiene y en que tienda la puedo encontrar aqui en Oakland California gracias
They offer the V-Knurled Drive rolls in (flux-cored or difficult-to-feed wire) in the below sizes. Biggest would be the .052 which is 079608. 079606 .035 in. (0.9 mm) 079607 .045 in. (1.2 mm) 079608 .052 in. (1.3 mm)
$2,799 for the 235 with cart, TIG kit and dual cylinder cart! If you don't need the cart you can do the 235 and add TIG kit! I will link both for you! 235 with TIG and cart: bakersgas.com/products/miller-951847 235- $2,099 bakersgas.com/products/miller-907780 TIG Kit: $495 bakersgas.com/products/miller-multimatic-235-255-tigcontractorkit-301518 Let us know if you have any other questions!
i just bought a bran-new miller 235 and it had parts missing off of it right out of the box, how you think i felt spending that much money and could not use it, i called miller about the problem and they acted like they really didn't give a damn, dont brag 2 me about how good a miller welder is or there service, its all made in china just like the ones you get from harbour freight...
It is the MDX 250! We really like it compared to the previous Miller guns, a few little improvements. Which gun did you prefer? Did you try the new MDX?
Have trouble getting done assembly off . Spatter binds up internal against diffuser. Try to keep it clean and it just gets a slug in there. Nice machine not happy with gun. Little overpriced
Thank you for all the information you provide on your channel! I’m new to welding, and your videos help so much with trying to choose the right tools to start out with.
Terrific review and just purchased this unit based on the review. Keep the new equipment reviews coming.
Hope your unit last more then a year without letting you down. Had the 215. Shorted out when using the spoolgun to weld aluminum.
Upgraded to the 220. Printed circuit board went out one year after using it. Fixed under warranty.
($1,700 repair)
1.5 years later, the connection for the tig torch started arcing yesterday. Now the lcd screen wont come on. Miller says no more warranty. Take it to a repair center. No troubleshooting, no way to fix it, nor any reason why it failed from technical support. As a self-employed welder, this blue box is how I feed my family and pay my bills. Both the 215 and 220 have let me down 3 times now. These machines are not made for longevity. Good luck with yours.
You also have some adjustment in auto set, That is a nice feature !
Yes for sure! Some people think it just is set at that but you can adjust up or down.
I threw down some pretty long welds on some 1/2 plates to 3/8 plate and welder never stopped, I love mine.
Not sure what spool gun would work best, I don't weld for a living I have received different advice ?
I'm a Miller service center and for the life of me I don't get why they didn't include AC tig in this
I can’t find a whole lot of reviews on the 235. Is it just because of the lack of AC tig ?
This machine is designed for a shop or home application to fit in where say a 252 would. Allowing a higher duty cycle and only 220 power. The ability to add a variety of Spoolguns is a good aluminum solution and it comes standard with the MDX-250 gun making it a bit more industrial than say a 215 or 220. The AC capability is great but it puts the machine out of the price range for many shops!
@@barnycanuck6234 It is actually a new machine from Miller. If you have any questions let us know. They have a few other machines in this category too but this is the newest.
Man I’m stuck between this 235 or the Esab 235
Love miller; the best.
So does the wire feed off of the bottom of the spool or off the top of the spool?
Multi voltage plug wound be nice. Which one would be your choice between this and the esab 235 rebel?
Agree with the dual voltage. We have 220 power here and love the 235!
I'm looking for one that I can take it out in the field hook up to 225 lincoln im running. I get in situations where I need mig instead of stick. I like suitcase's too. Mayb u can help me out what kind suitcase I should get.. thnx
Have you guys ran this welder. I orderd from you. Mine will be at my door Monday looking forward to running it. Have a tooth shank to weld on bucket and some trailer work right away
We have we have used in a few videos and projects around the shop. We like it. We have 220 power and like the MDX 250 gun! Let us know how you like it!
Does this have hot start for the stick mode
Great review
Thanks for watching Jim!
which miller will do stick 6010 and 7018 with mig and tig ??
None of the Miller Multiprocess will do 6010 well. They will do 7018. ESAB units run 6010. A really reasonable STICK unit would be the Rogue or multiprocess check out the Rebels! Thanks for watching!
@@BakersGas will it do 6011 ?
Is the liner rated for .045 or do you have to change it ?
You have to make sure you have that liner in but they come ready for .035
Would i be able to run this welder off of a generator that has a 220 volt plug?
Yes but you would need to have 12K watts at least
So it doesn’t like 6010, is there another rod that can be used with this machine that offers the penetration of the 6010
You can run 7018, and it will do 6010 just not well. Sorry! Only negative to this machine.
If I was to purchase the new Meg gun will it work on the Miller Multiprocessor 220 AC/DC?
Do you mean the MDX 250 on the 220? If so yes you could.
To bad it won’t pulse aluminum or Tig AC , still waiting for 1 to do all
Terry Spencer …check out the ESAB 205, it’ll do it all.
The 220 multimatic does
Chuck what I was talking about is pulsed Aluminium mig Welding and AC tig welding
@@terryspencer9258 I think it actually only does pulse on tig but it does tig ac
Fronas can do it all and is a better rig.just saying though as a all in one.
Harga berapa?..dantuk arus listrik di Indonesia cocok Ndak?..dan ntuk order ndiri di Indonesia ada Ndak?
Excelente 👍 me gusta Miller
We love Miller too! Thanks for watching!
Hola como esta ?Nesecito una soldadora de ⛽ numero 225 soldar con electrode que precio tiene y en que tienda la puedo encontrar aqui en Oakland California gracias
Solo una pre gunta cuanto es la capacidad que tiene para soldar chapas delgada sin romperla y si tira los punto finos
Cual es el precio de esa maquina miller
Miller is smart. They won’t offer an all in one machine. Most in one but not all.
🤣🤣🤣🤣🤣 facts 💯 percent brother!!!
What's a welder without tig aluminum capabilities
You can add a Spoolgun!
What’s the largest flux cored wire this unit will take?
They offer the V-Knurled Drive rolls in (flux-cored or
difficult-to-feed wire) in the below sizes. Biggest would be the .052 which is 079608.
079606 .035 in. (0.9 mm)
079607 .045 in. (1.2 mm)
079608 .052 in. (1.3 mm)
@@BakersGas thank you!
saludos desde Venezuela excelente equipo de trabajo
Thanks for watching!
Miller 👍💪❤
Please how can I get some to buy, because am in ghana
Miller una buena máquina,para trabajos exigentes...”Perú”
Yes! Thanks for watching!
235 I just wish it had a pulse mig. because is size compact and not heavy. easy to carry
So true!! Hopefully in a few years they will come out with that :)
How much for this unit with all bell and whistles TIG set up and all
$2,799 for the 235 with cart, TIG kit and dual cylinder cart! If you don't need the cart you can do the 235 and add TIG kit! I will link both for you!
235 with TIG and cart:
bakersgas.com/products/miller-951847
235- $2,099
bakersgas.com/products/miller-907780
TIG Kit: $495
bakersgas.com/products/miller-multimatic-235-255-tigcontractorkit-301518
Let us know if you have any other questions!
Wish I could have One.. Someday..
Buy something cheaper sell products or do some jobs until you can afford one
@@pappaclutch3266 good advice man
Saludos mi estimado y cuál es su precio?
¡Se trata de $ 2,099 después de nuestro Bono de Baker! Si tiene alguna otra pregunta, háganoslo saber.
How to order sir from philippines
Plz what is price miller 235 machine
$100 off right now! bakersgas.com/products/miller-907780
Sản phẩm này có ban ở đâu ạ
How about a free / give away fall off truck or a 50 % off coupon?
haha we do have $100 promo code right now and some great deals on accessories. Call or email us if you need a custom quote.
Still no ac?
The 220 has AC. The 235 is only 220 powered and higher duty cycle but correct no AC TIG.
Muy buena máquina precio en dólares saludos cordiales de Cali Colombia 🇦🇲✌️
Thanks for watching!
How I can buy it
Link below!
bakersgas.com/products/miller-907780
With the cash da cash
Madre mía hermosas .
Quiero una Miller son buenas máquinas
What is the price??
It is $2,199 for the machine only but we do have a promo right now for $100 off!
bakersgas.com/products/miller-907780
Cheap enough that is for sure.
Y cual es su precio???
$2,099 for the machine only after the promo code is applied.
how much😃
$100 off right now with promo code: MULTI235
bakersgas.com/products/miller-907780
Cuánto es el predio de la maquina
The machine only is $2,099 after the promo is applied!
How much
It is $2,199 but we do have $100 promo right now
bakersgas.com/products/miller-907780
i just bought a bran-new miller 235 and it had parts missing off of it right out of the box, how you think i felt spending that much money and could not use it, i called miller about the problem and they acted like they really didn't give a damn, dont brag 2 me about how good a miller welder is or there service, its all made in china just like the ones you get from harbour freight...
Hey James, I am sorry to hear about your issue. If you bought from us reach out to us directly and we will see if we can help.
Loại này hàn rất tuyệt vời. Nhưng rất đắt.
How much cost a machine like that ?
This is my question as well?
North of $2000
We have a promo for $100 off! It is $2,099 right now! Let us know if you have any questions! PROMO CODE: MULTI235
bakersgas.com/products/miller-907780
@@scottl3739 $2,099 right now! Use promo code: MULTI235
@@Walloflead0331 yes it is actually $2,099 right now. $100 off with promo code: MULTI235
Shit , not a welding machine! Fronius is the best!
cuanto cuesta una de esas
The machine only is $2,099 after the promo code is applied!
No AC? No buy for me. Going to HTP welders.
Please Santa.......
Muyboni.ese.aparato.kisiera.unodeesoyo
Great product... still not real affordable.
It pays out with years of reliable service. I have 3 of them now. the Syncrowave 250 still smokes those rods!
Actually for what it does it really is tbh.
بكام
It’s not Worth the money you pay for it! I own it and my sons 211 keeps up with it and you can’t weld larger then 1/8 5000 series Aluminum wire!!!
Over priced for what the machine will do. Terrible mig gun design.
It is the MDX 250! We really like it compared to the previous Miller guns, a few little improvements. Which gun did you prefer? Did you try the new MDX?
Baker's Gas Abicor Binzel AT gun FTW!
$2000 is over priced ??
Maybe just give it to you for free
Far nicer than the M-25 gun, and a hell of a machine
Have trouble getting done assembly off . Spatter binds up internal against diffuser. Try to keep it clean and it just gets a slug in there. Nice machine not happy with gun. Little overpriced
Que lo hagan en español
Great review
Solo una pre gunta cuanto es la capacidad que tiene para soldar chapas delgada sin romperla y si tira los punto finos
You can do thinner material. How thin did you want to weld and what type of application/material.