I guess Im randomly asking but does anybody know a way to log back into an instagram account..? I stupidly lost my password. I appreciate any tricks you can offer me
this is a stupid narrative to keep pushing. if you own an EM1 Si or a CRX or something, and a thief actually wants it, owning stick isn't gonna stop it from being taken. the most it will stop is teenage joyriders (your gears are gonna get fucked if they decide to go faster than 1st gear will allow them). that's it. sticks won't stop actual car thieves
fast, informative, and you guys did a very clean and professional job on those electrical connections. so many "how to install a tach" vids ive seen are sloppy and careless. Thank you guys. good show
There is no way this video is 12 years old. I remember wiring up the tachometer on my 78 ford when I was 15(24 now) and watched this for help. Almost 9 years of mcm for me. Absolutely crazy!
1:30 THANKS MARTY AND MOOG! I got a 1986 Dodge Ram 50 4g54 2.6L (Mitsubishi L200 where you guys are from) and Im getting her running for the first time in 7 years. I got it started and the tach is not reading ... My coil looks a tad rusty and im wonder about cleaning the LEFT TERMINAL or just replacing with new. I HOPE THIS WORKS. Once again yall come in CLUTCH. THANKS OLD MCM VIDEO!!
My friend has two of these installed in his car, three if you count the one on the dash cluster. Then again he also has a boost gauge but no turbo LOL.
"If your cars not that quick like ours, a big gauge let's you know exactly how fast you're not going" I lol'd... and then cried in my mazda protege dx.
Well with a few simple parts you can get off of ebay including: a GPS to locate taco stands, a large guage to show when you are getting close to a taco stand, an led alarm light to let you know when you have located a taco, then some wiring and a soldering iron to help you install it in your car.
I need a bigger one because you can read the rpm in a shorter amount of time compared to the little one inbuilt in the dash. And It looks quite cool tbh!
On the dragstrip with a high revving engine it might be useful with a tach that size but for everyday driving, one that goes up to 6-7k rpm and in-dash small size would be enough if even necessary.
Damn - I was about to sell the AUDI for the Hyundai+Tacho combo. It's good that everything on the internet is real and trustworthy and there for the greater benefit of society. I almost made a huge mistake!
@masterkronixster wire you're looking for should be coming from coil, not distributor. have you got a workshop manual? look in a workshop manual at the wiring diagrams and look for the instrument cluster, should be a wire for tacho somewhere. Most cars are pre-equipped with the wiring for a tacho behind the instrument cluster (even if your model was never equipped with one), just have to get a wiring diagram and find out which ones.
@Jashomartin Pretty much anywhere that sells gauges? You don't need a huge one with a shift light etc, you can get small ones that just have the needle, like a normal tacho, or you can get those monster tach's with the shift lights etc, which no one really needs cos' if you don't know when to change gear on the street, well, enough said.
hey guys love the show was just wonder if you could do an episode where you show how to do a tacho gauge from the coil since i got a good old ford fiesta but it doesen't have a gauge and i would love to know how to do it thanks a million if you can do a episode on it if not no big deal ill keep on watching the show
Hey Guys great Vid both funny and informative. Heres a question. I am installing a custom dash in an old Holden Ute and I want to use a Nissan Gauge Cluster that has all the Gauges built in including a Tacho. Since this set came out of a late model Skyline the Tacho obviously wont be set up for a 253 V8. Is there any way to mod the Tacho so it will work with my 253? The speedo ratios are exactly the same as the original car cause I got technical & used a drill to measure both speedos.
It's a device that measures the size of your taco so you know how fast you can safely eat it. If you eat it too fast the taco will possibly break and explode.
Hi can you please tell me what is the part of the car where the gauge is attached called because I can't understand its name in the video. Thanks. Great vid bdw
Aesthetic, better viewpoint (preference) or in my case, your stock tacho doesn't work. It may be more accurate if it's anything like an aftermarket boost gauge.
You need to disconnect the battery when working on electrical. Soldering irons inject small voltages into the wire you are soldering, which may or may not be protected.
How do soldering irons "inject voltage"?The only issue you might have is if you are using a cheap 2$ iron that isnt properly grounded and you get a static shock.
You are both morons. A) Soldering iron tips are referenced directly to earth. B) They do not "inject" voltages .... if yours does, next time don't buy an iron from the dollar store C) If the iron wasn't grounded, how would that in any way cause you to get a static shock? That doesn't make any sense.
lol,you might want to go reeducate yourself then.You'll soon realize that just because something is grounded with a 3 prong plug that it doesnt automatically make it esd safe.There is still a potential for damage caused by a difference in electrical potential that could exist between the iron and whatever you're working on.But hey I'm so sure that you already knew that. Oh and you might also want to read my original comment again since reading comprehension has failed you.Because as you so gracefully pointed out how a cheap dollar store iron that isnt grounded could be a problem.Or was my answer wrong because I said 2$ iron??Instead of dollar store? Either way you are wrong on both points. but thanks for stalking me online.It really truly shows what kind of person you truly are.
all u have to do for the tacho signal is look in the fusebox and look for the guage/guages fuse pull the fuse out. push the wire in and replace the fuse
@SmashOut200 The Hyundai Genesis is cool straight from the factory. RWD, the base models are turboed, and the high end have a beefy V6. I'll take one if you don't think it's cool. lol
Can you guys show the procedure for new 5.7 hemi engines (multi displacement system) 2007 and newer with automatic 4/8 cylinder shut off when foot's easy on gas ?
What good multimeter for rpms do you recommend? And do some scanners have an adapter just to check rpms on a vehicle, just like the multimeter's leads?
@vickylovessomeone1 I was thinking that to, As Mums little AE92 corolla hatch doesnt have one and I dont wanna go through all the hastle of getting a cluster that has a tacho and getting all the KM changed for the odometre, getting the speedo recalibrated all that crap so it'll be easier to just put a seperate smallish one on just to see what the RPM's are none of this over sized crap as it's mums daily run about
Can you install a Taco gauge on your mad diahatsu? It's like a shift light, but it turns on when your tacos are ready at the other side of the drive thru
@therealracer135 ...uh.. pretty much any shop that sells electrical components like resistors, capacitors, ICs, LEDs, diodes or the like will sell them.
hi guys good work actually m in lil problem i have mazda 3 2006 and i got hks rpm meter . i dont no from where can i get rpm coil can u plz tell me how and from where i can get rpm coil thanks
i beg to differ with that Hyundai thing. I have 2 a 2014 genisis coupe v6 and a 2002 Elantra GT with a 4G63 pushing 17psi and 430hp at the wheels, and she looks mostly stock. I have surprised a few Porsche's, BMW's and pretty much anyone who raced me with that car.
Amen to this. It's sad as an American, I can't buy a decent Ford or GM product at a affordable price. Hell, I went with Honda because they're cheaper, hold their value, and I get peppy power at a low cost. Plus I can get parts for my '05 from a wrecked '03 civic. American car markers should take note.
0:45 "if your car is no that quick like ours, a big gauge let's you know exactly how fast you're not going"
i didn't expect a joke here
It's crazy seeing and hearing the new videos compared to the old! Reminds me of the How It's Made soundtrack!
I guess Im randomly asking but does anybody know a way to log back into an instagram account..?
I stupidly lost my password. I appreciate any tricks you can offer me
@Payton Jeremias Instablaster =)
You know the funny thing is, i never really learn how to do stuff from mcm, but i still watch it for entertainment.
Same hahaha!
Lol same here
So true lmao
i dont even have a license
John Smith im to young so i just watch it because its entertaining and interestring
>Thief magnet.
Good thing I live in the USA, where car jackers don't know how to drive stick. ;D
Lol, if you can drive stick in america you're more likely to get woman that can't afford autos lol
I'm from PA and I drive an 84 w100 with a 4 speed manual tranny like 5 times a week, not that hard
Not true. My 98 ram was a stick and it got jacked in houston.
this is a stupid narrative to keep pushing. if you own an EM1 Si or a CRX or something, and a thief actually wants it, owning stick isn't gonna stop it from being taken. the most it will stop is teenage joyriders (your gears are gonna get fucked if they decide to go faster than 1st gear will allow them). that's it. sticks won't stop actual car thieves
fast, informative, and you guys did a very clean and professional job on those electrical connections. so many "how to install a tach" vids ive seen are sloppy and careless. Thank you guys. good show
15 years later mighty car mods coming in clutch😂
"a tacho will not make your Hyundai cool" hahah the best part of the video!
thanks guys!:)
If in doubt check your wiring diagram. If you can't work it out, do the whole install then pay an auto electrician to do the rev wire for you.
There is no way this video is 12 years old. I remember wiring up the tachometer on my 78 ford when I was 15(24 now) and watched this for help. Almost 9 years of mcm for me. Absolutely crazy!
Gosh this music is awfully damn close to the sound track to "How it's made"
lol true haha
Reminds me of gran tourismo on ps2
That was great! A neat, clean install with just the right amount of humor thrown in.
But how do I install a Taco Gauge?!?
Go to Taco Bell, and buy a taco, place it on your dash
Mr_ Maus13 Taco gauge is measured in 1000 tacos/min, which keeps track of how many tacos you eat.
joeman543 Buy a midget Mexican
go to kfc buy a taco and place it on your dash
Thanks! the close ups of your hands and tools helped a bunch!
1:30 THANKS MARTY AND MOOG! I got a 1986 Dodge Ram 50 4g54 2.6L (Mitsubishi L200 where you guys are from) and Im getting her running for the first time in 7 years. I got it started and the tach is not reading ... My coil looks a tad rusty and im wonder about cleaning the LEFT TERMINAL or just replacing with new. I HOPE THIS WORKS. Once again yall come in CLUTCH. THANKS OLD MCM VIDEO!!
My friend has two of these installed in his car, three if you count the one on the dash cluster.
Then again he also has a boost gauge but no turbo LOL.
whats so funny about a boost gauge in a non turbo car?
I cant think of a name yea i know its kinda wierd because it doesn't do anything except read vacuum
RICE RICE
Shaharyar Rehan BABY
15 years......and still usefull video XD.... (thats why am here)
2022 mcm still helping me 😄
14 years later and I just had someone bring this same gauge in the shop for install 😂🤣
It makes the video way funnier if you think of tacos everytime he says tacho XD
back when Marty had hair
yup
his hair is in the bin
What a blast from the past love you guys!!
Old MCM videos make me smile
@KScharba Sure is - before it was famous!
"If your cars not that quick like ours, a big gauge let's you know exactly how fast you're not going"
I lol'd... and then cried in my mazda protege dx.
finally a new video!!!!
excited as
Well with a few simple parts you can get off of ebay including: a GPS to locate taco stands, a large guage to show when you are getting close to a taco stand, an led alarm light to let you know when you have located a taco, then some wiring and a soldering iron to help you install it in your car.
Miss these episodes
They look so young...god, cant believe this was 8 years ago or so
good old mcm.
For some cars you can put the RPM signal wire from the gauge into the OBD port in the IG slot, It worked for me
+Melted Record Visuals & Mixes no not ecu, if you have kik or something I can send you a pic of it
I have this Tach, how do set where the shift light comes on????
set the ;little knob to your shift to the rpms you want to shift at
Mighty mods come along way
I need a bigger one because you can read the rpm in a shorter amount of time compared to the little one inbuilt in the dash. And It looks quite cool tbh!
I totally read that in Martys voice. Maaaad
On the dragstrip with a high revving engine it might be useful with a tach that size but for everyday driving, one that goes up to 6-7k rpm and in-dash small size would be enough if even necessary.
Damn - I was about to sell the AUDI for the Hyundai+Tacho combo. It's good that everything on the internet is real and trustworthy and there for the greater benefit of society. I almost made a huge mistake!
thanks so the spark plug is used to tell the revs of the engine and i have to make sure i get one with three wires
@masterkronixster
wire you're looking for should be coming from coil, not distributor.
have you got a workshop manual? look in a workshop manual at the wiring diagrams and look for the instrument cluster, should be a wire for tacho somewhere.
Most cars are pre-equipped with the wiring for a tacho behind the instrument cluster (even if your model was never equipped with one), just have to get a wiring diagram and find out which ones.
I don't get it. So this mod is illegal in Australia because of "view obstruction", but drinking and driving is totally legit?
i need to know how to install i temp gauge in my 2000 dodge neon can u help
Great work, as usual.
depends where you install it, if it "obstructs" your view, it might be illegal, so install it away from the windshield
OMG watching this at 2017 and look how Moog and Marty looks younger
I think you guys should do some mods on turbo diesels as well, but then again though I guess that they aren't popular in AUS
do yall know anything about putting rev limit on carburetor-ed cars . i have an early 90's opel 140S
they have their uses especially for race application
wrong i race and i use a tec so i can keep my shift even without haveing to look down at my dash tec
not all car manufacturers has the same wiring color codes... not all tacho are electronic... some tacho are cable driven tacho..
i really needed this, thanks
Watching again after 12 years 👍🏻
What's the song that starts at 00:18? Been trying to find it, and they use it frequently. Not released as a single or what?
+Bryan Young pretty sure it's one of moog's songs, probably on his mcmtv2 page description or something
@Jashomartin Pretty much anywhere that sells gauges? You don't need a huge one with a shift light etc, you can get small ones that just have the needle, like a normal tacho, or you can get those monster tach's with the shift lights etc, which no one really needs cos' if you don't know when to change gear on the street, well, enough said.
hey guys love the show was just wonder if you could do an episode
where you show how to do a tacho gauge from the coil since i got
a good old ford fiesta but it doesen't have a gauge and i would love
to know how to do it thanks a million if you can do a episode on it
if not no big deal ill keep on watching the show
The yellow things are heat shrink. It just covers the wire so the bear wire won't short out on anything. The tool he has is a wire stripper.
i want to know how to find the rpm signal wire in my subaru B4
Hey Guys great Vid both funny and informative. Heres a question. I am installing a custom dash in an old Holden Ute and I want to use a Nissan Gauge Cluster that has all the Gauges built in including a Tacho. Since this set came out of a late model Skyline the Tacho obviously wont be set up for a 253 V8. Is there any way to mod the Tacho so it will work with my 253? The speedo ratios are exactly the same as the original car cause I got technical & used a drill to measure both speedos.
Hey, do you guys get your electrical stuff from jaycar?
some crown vics up untill a few years ago didnt have em..also a ton of cars from the 80s n 90s didnt have em unless they were somewhat sporty cars
@FiveStarFilmz you can always install an shift light. Saves you all the trouble. ;)
It's a device that measures the size of your taco so you know how fast you can safely eat it. If you eat it too fast the taco will possibly break and explode.
Hi can you please tell me what is the part of the car where the gauge is attached called because I can't understand its name in the video. Thanks. Great vid bdw
A-pillar
Aesthetic, better viewpoint (preference) or in my case, your stock tacho doesn't work. It may be more accurate if it's anything like an aftermarket boost gauge.
rigid one to my 88 toyota pick up 4x4, looks mad. It didnt have a tachometer so its also practical.
holy crap this is throwback
You need to disconnect the battery when working on electrical. Soldering irons inject small voltages into the wire you are soldering, which may or may not be protected.
How do soldering irons "inject voltage"?The only issue you might have is if you are using a cheap 2$ iron that isnt properly grounded and you get a static shock.
You are both morons. A) Soldering iron tips are referenced directly to earth. B) They do not "inject" voltages .... if yours does, next time don't buy an iron from the dollar store C) If the iron wasn't grounded, how would that in any way cause you to get a static shock? That doesn't make any sense.
***** lol I think you need to read up on ESD some more ;)
SouthJerseySound My friend, I know more about ESD than you know about typing stupid shit online (which seems to be a lot)
lol,you might want to go reeducate yourself then.You'll soon realize that just because something is grounded with a 3 prong plug that it doesnt automatically make it esd safe.There is still a potential for damage caused by a difference in electrical potential that could exist between the iron and whatever you're working on.But hey I'm so sure that you already knew that.
Oh and you might also want to read my original comment again since reading comprehension has failed you.Because as you so gracefully pointed out how a cheap dollar store iron that isnt grounded could be a problem.Or was my answer wrong because I said 2$ iron??Instead of dollar store?
Either way you are wrong on both points. but thanks for stalking me online.It really truly shows what kind of person you truly are.
all u have to do for the tacho signal is look in the fusebox and look for the guage/guages fuse pull the fuse out. push the wire in and replace the fuse
My car is 50 years old, how do I do that install
Signal wire to the - on the ignition coil
@SmashOut200 The Hyundai Genesis is cool straight from the factory. RWD, the base models are turboed, and the high end have a beefy V6. I'll take one if you don't think it's cool. lol
nice job dude...cleaner job ever..
Is it legal to have my Tacho on my dash? like where some people put boost gauges?
***** Aslong as it doesnt block the view
Good day mate-
Hey man-
How we doing?-
Im alright-
Mad-
LMAOOO i love Moog!
you should do a vid on how to install eclectric oil presure an oil temp gauges
Can you guys show the procedure for new 5.7 hemi engines (multi displacement system) 2007 and newer with automatic 4/8 cylinder shut off when foot's easy on gas ?
I would guess you've still got it set to 8 cylinder mode, either that or its faulty.
exact the same Tacho I got in my car :) Keep up the good work!
woohhooo their back
What good multimeter for rpms do you recommend? And do some scanners have an adapter just to check rpms on a vehicle, just like the multimeter's leads?
oh lol i laughd my ass off at "if youre cars not quick like ours the tack lets you know exactly how fast youre not going" XD
"A Tacho will not make your Hyundai Cool" ... So True. XD.
TheRealLazerBlazer22 i didn't think of speed when I got my coupe, I just love the way it looks, and its reliable
Will it make my Dodge Caravan cool?
Love to know where you can get one of those automatic wire strippers
i'm thinking that too, as soon as i saw the "ford" on the steering wheel that jumped to mind
Not sure what Wood Work has to do with this? To make some nice dash trim perhaps?
the flames on it give you a extra 30kw!!!
@vickylovessomeone1 I was thinking that to, As Mums little AE92 corolla hatch doesnt have one and I dont wanna go through all the hastle of getting a cluster that has a tacho and getting all the KM changed for the odometre, getting the speedo recalibrated all that crap so it'll be easier to just put a seperate smallish one on just to see what the RPM's are none of this over sized crap as it's mums daily run about
At first I thought: why did you guy flip the video? And then I'm like: oh wait this is the UK. lolol
Can you install a Taco gauge on your mad diahatsu? It's like a shift light, but it turns on when your tacos are ready at the other side of the drive thru
I want to install a taco gauge. Should I go with a hard or soft shell?
If my tacho is intermittent, would it likely be a problem with the dash cluster or a bad signal wire?
now i read that in Moog's voice
They are from Australia, in season 2 i think they also tell us that Blow Off Valves are illegal as well in Australia.. that sucks..
actually in the usa. the sterring wheel is on the wrong side because mainly all around the world it is on the right side
@therealracer135 ...uh.. pretty much any shop that sells electrical components like resistors, capacitors, ICs, LEDs, diodes or the like will sell them.
What kind of stippers are those theyre dope!
The ending is epic
hi guys good work actually m in lil problem i have mazda 3 2006 and i got hks rpm meter . i dont no from where can i get rpm coil can u plz tell me how and from where i can get rpm coil thanks
i beg to differ with that Hyundai thing. I have 2 a 2014 genisis coupe v6 and a 2002 Elantra GT with a 4G63 pushing 17psi and 430hp at the wheels, and she looks mostly stock. I have surprised a few Porsche's, BMW's and pretty much anyone who raced me with that car.
#huyndai cool
Amen to this. It's sad as an American, I can't buy a decent Ford or GM product at a affordable price. Hell, I went with Honda because they're cheaper, hold their value, and I get peppy power at a low cost. Plus I can get parts for my '05 from a wrecked '03 civic. American car markers should take note.
Does anyone know exactly what tool Marty is using to splice and strip wires. I need one of those.
well done boys
I don't think they get those in Australia... and why does a car made after 07 not have a tach?
I've heard that they make about 20 kilowatts extra, can you confirm that?