It's one of the nicest feelings, fixing issues on your Beemer and they actually work. All the detailed attention and love you put in, the many hours of cleaning parts and even donating some dna ... It's all worth it in the end! I'm happy for you. Project well done 🙏👍
looooove that feeling of relief that comes after an extended repair. Congratulations My roll bar is leaking but functional, so im searching for the leaking fix.
Nice one George. It's a fantastic feeling when a car 'talks' to a new component. The injury is standard procedure and you would not be justified in claiming it was job done without some broken skin. I echo what you say about replacement parts often being a nightmare to get right despite engine no., chassis no. etc. Another thing that manufacturers don't seem too bothered about getting catalogued right, alongside building cars around the most important nut which necessitates hours of labour to gain access. Keep it up, great work, fab channel!
I'm so pleased you got this sorted buddy but sometimes do you think your knocking your head against a brick wall getting the correct parts for the bmw. I loved my bmw 520d msport. had it 6 years loved every minute driving it . even services to car was a pleasure. but if anything went wrong with it thats when problems started . parts came that didn't fit had to send back try again . unfortunately I've turned 60 not climbing under cars anymore. so it's gone 😕 sad but that's life . I'm so pleased with your love for the cars keep it up .
Hi! Old vid, but I have same issue. Pressure build up on the front axle. Swaybar don't leak and wondering if your problem and mine could be the airfilter or the ventilation valve at the swaybar. Trying to understand the problem before spending lots of money fixing it.
Well done !!! Dit you had to bleed thé air ore just top off thé flued ? Mine is also bad .. no pressure rear axle so it's thé same thing but in thé rear? Ore could it be something Else what do you think? Thank you
I took my 2007 650i in today (9/21/22) to make sure it was the the Dynamic drive sway bar that was leaking. My Friend and Mechanic assured me it was. I'm going to try your fix and give it a go. They want $2200 US for the unit. I'm going to subscribe. I really appreciate your work and videos.
I've had arm bruising post-backyard mechanics that I can't explain... Kudos to you man. I've done my dash with this stuff, for now. But I still enjoy seeing what you do. And HOW COOL WAS THE ROCK N ROLL? Happy travels to the north! 🙂
Great news George, you must be really chuffed getting it to work after all this time buddy. I think a sore arm was well worth the effort. Love watching your videos, keep up the good work. 👍🏻👍🏻👍🏻
Not trying to be picky George but you should never get Under a car Without proper support like Axel stands as Jacks can collapse at any point be safe please 🙏
Morning George, B from Oz. Really enjoy when you get stuck into the 760. I got a 07 750li. I don’t know what I am doing, but with every new post from you I manage to replicate this with success…… go figure. May I ask what coding program you use? It would allow me to get to next level, still not knowing what I am doing but kinda know what I’m doing. Cheers mate. B
hello I have error 5d51 Dynamic drive fault. Supply pressure sensor HA, do you have any idea which sensor it should be from and where it is located? Thank you
Oh the pain of tool slippage, gave myself a nice shiner last week whilst trying to undo a tight rear hub nut on my 118d .The breaker bar and socket slipped off, smacked my face not once but twice on side of car.🤣🤬
Hi George, thanks for your video, I dont speak to much enlgish but i want to cuestión something, a couple days ago i change the o-rings to my power sterring pump, and then the light to DYNAMIC DRIVE FAULIRE and the picture or image ( i dont know how it says lol) , of a car like turn down left, and i don know how is, im really need your help if change this thing, its gonna fix it. How i can conntac tu you? im really apreciate.
Hi George Is that problem come back after the work you done or is sorted out I have problem with the dynamic drive on my 760i 2006 but I don’t have any leaks from that part Thanks
Still quite a lot.. Both HPFPs need refurbishing, spark plugs, ignition coils, intake gaskets, drop links, wheels refurbishment, new tyres and mostly cosmetic stuff after that
Glad it’s sorted mate, but from one mech to another I got to be honest this video did make me laugh, ouch,,,,,, ouch ,,, oh that hurt ,,,,,,, aww ouch 😂😂😂 know I shouldn’t laugh but been there so many times myself 😜, oh and get yourself some ratchet spanners 👍 Nice vid buddy 👍👍
@@crazyharis id just do what george did and buy another good used one on ebay. They’re pretty readily available as they used the same part on the f01 as these e65’s
I lost this video and somehow did not subscribe. I have everything off except the vent tubes so that will be the next thing to get done. I am also replaceing the alternator bracket gasket and vacuum pump gasket as well.
It's one of the nicest feelings, fixing issues on your Beemer and they actually work. All the detailed attention and love you put in, the many hours of cleaning parts and even donating some dna ...
It's all worth it in the end!
I'm happy for you. Project well done 🙏👍
Hahaha thanks man👌🏼
can i use arf oil instead of chf?
Holy sh!t ABSOLUTELY PLEASED George I haven't even fixed my car yet but with your videos like this gives hope to people who does DIY Bless you mate!
Thanks Patrick!
Well done for not swearing. The air turns blue when I hurt myself!!
Hahaha thanks
looooove that feeling of relief that comes after an extended repair. Congratulations
My roll bar is leaking but functional, so im searching for the leaking fix.
I have the leak repair on my channel
well done George for finally fixing your dynamic drive problem after 18 months.
Thanks Mark!
Escause me, the problem yours , was Dinamyc system faulurie?
Just love it when you / I solve a long standing issue like this - very satisfying. Well done mate!
Thanks mate
Very well done mate on the fix a good sight to see it working. Lot hard graph there, you felt some pain there literally
Cheers mate
Nice one George. It's a fantastic feeling when a car 'talks' to a new component. The injury is standard procedure and you would not be justified in claiming it was job done without some broken skin. I echo what you say about replacement parts often being a nightmare to get right despite engine no., chassis no. etc. Another thing that manufacturers don't seem too bothered about getting catalogued right, alongside building cars around the most important nut which necessitates hours of labour to gain access. Keep it up, great work, fab channel!
Cheers John!
Im not sure where you guys are from, but i use FCP Euro for all my parts and have had a lot of luck and they have great prices also
Congratulations George 🥳🥳
I'm so pleased you got this sorted buddy but sometimes do you think your knocking your head against a brick wall getting the correct parts for the bmw. I loved my bmw 520d msport. had it 6 years loved every minute driving it . even services to car was a pleasure. but if anything went wrong with it thats when problems started . parts came that didn't fit had to send back try again . unfortunately I've turned 60 not climbing under cars anymore. so it's gone 😕 sad but that's life . I'm so pleased with your love for the cars keep it up .
Hi! Old vid, but I have same issue. Pressure build up on the front axle. Swaybar don't leak and wondering if your problem and mine could be the airfilter or the ventilation valve at the swaybar. Trying to understand the problem before spending lots of money fixing it.
Bravo George! Gonna get to work on this myself. Ordering parts now!
Well done !!! Dit you had to bleed thé air ore just top off thé flued ? Mine is also bad .. no pressure rear axle so it's thé same thing but in thé rear? Ore could it be something Else what do you think? Thank you
I took my 2007 650i in today (9/21/22) to make sure it was the the Dynamic drive sway bar that was leaking. My Friend and Mechanic assured me it was. I'm going to try your fix and give it a go. They want $2200 US for the unit. I'm going to subscribe. I really appreciate your work and videos.
Good luck
2200 ??? Buy a used one no??
In Latvia we restor dynamic drive bar for 300 evro 😅
I've had arm bruising post-backyard mechanics that I can't explain... Kudos to you man. I've done my dash with this stuff, for now. But I still enjoy seeing what you do. And HOW COOL WAS THE ROCK N ROLL? Happy travels to the north! 🙂
Haha thanks man!
well done bud, great job
Thanks Gary!
It was doing a happy dance, that’s what they do. You just need to play Whigfield “Saturday night” track over the top of that part!
Great news George, you must be really chuffed getting it to work after all this time buddy. I think a sore arm was well worth the effort. Love watching your videos, keep up the good work. 👍🏻👍🏻👍🏻
Yep glad to finally have it sorted… onto the next issue now!
I look forward to it.
Well done George - edge on the seat stuff waiting on it to complete.
Cheers mate
well done, do a video on on this feature please. Maybe a video of the cars handling before and after
Will do!
Not trying to be picky George but you should never get Under a car Without proper support like Axel stands as Jacks can collapse at any point be safe please 🙏
Very true but unfortunately I left them at my parents house so need to buy some more.
I did have 2 jacks and a wheel under the car👍🏻
can i use arf oil instead of chf?
Hello
What program did you use for the procedure when you go through the testing???
Thanks 🙏
Erik
Same question
Congrats, great when it works out. Really good video. 👍
Thanks David!
Well done got there in the end
An now a trick paint, chrome wheels,
An you can join the LA Lowriders😂😂🤙🏽….. well done young un😎
Watch your head on that roof. So clever seeing it do its leveling thing. See how it rides and let us all know.
I’ve banged my head a good few times already haha!
Brilliant. Good on you!
Morning George, B from Oz. Really enjoy when you get stuck into the 760. I got a 07 750li. I don’t know what I am doing, but with every new post from you I manage to replicate this with success…… go figure.
May I ask what coding program you use? It would allow me to get to next level, still not knowing what I am doing but kinda know what I’m doing.
Cheers mate. B
ISTA D
Well done mate. Love that feeling of a fix👍
Cheers mate
Great job well done .
hello I have error 5d51 Dynamic drive fault. Supply pressure sensor HA, do you have any idea which sensor it should be from and where it is located? Thank you
Well done 👏
Oh the pain of tool slippage, gave myself a nice shiner last week whilst trying to undo a tight rear hub nut on my 118d .The breaker bar and socket slipped off, smacked my face not once but twice on side of car.🤣🤬
😂
Hi George, thanks for your video, I dont speak to much enlgish but i want to cuestión something, a couple days ago i change the o-rings to my power sterring pump, and then the light to DYNAMIC DRIVE FAULIRE and the picture or image ( i dont know how it says lol) , of a car like turn down left, and i don know how is, im really need your help if change this thing, its gonna fix it.
How i can conntac tu you? im really apreciate.
Hi George
Is that problem come back after the work you done or is sorted out
I have problem with the dynamic drive on my 760i 2006 but I don’t have any leaks from that part
Thanks
Nope it’s been fine since
Nice one buddy great job I'm glad for you 👍 👏 😀
Well done mate. What’s left to do
Still quite a lot.. Both HPFPs need refurbishing, spark plugs, ignition coils, intake gaskets, drop links, wheels refurbishment, new tyres and mostly cosmetic stuff after that
@@GeorgeAusters soon be done
Felt ur Joy Mate!!! Cheers! Ive got same prob, Thnx
Hi, nice video! Do you feel any improvement in the behaviour of the car? Except the fact the error should nor appear anymore.
Yes! Handles so good now!
@@GeorgeAusters So you make me decide to change my antiroll-bar by a refurbished one. Hoping that I will not have to change the valve block ....
Is there any update regarding the part keeping the pressure or if its leaking again?
No issues👍🏻
Thanks for the quick response
Glad it’s sorted mate, but from one mech to another I got to be honest this video did make me laugh, ouch,,,,,, ouch ,,, oh that hurt ,,,,,,, aww ouch 😂😂😂 know I shouldn’t laugh but been there so many times myself 😜, oh and get yourself some ratchet spanners 👍
Nice vid buddy 👍👍
Haha cheers Andrew!
was the main cause an oil leak on that CH?
Watch my leak fix video
Good job 👍🏻
Thanks 😁
Congratulations 👍💐🎉
Thanks Kevin!
can i use arf oil instead of chf?
No, definitely not
@@GeorgeAusters I poured FEBI CFH but when it warms up the steering wheel becomes heavy
Mine sas no pressure ?
Anyone know how much it would cost to replace it on a 2005 550i ???
What torq did you use on the sway bar link ??
Can’t remember exactly, think it was 50 or 60nm👍🏻
Excellent top job. Stay safe be lucky
Cheers Lee
good job
Thanks!
Car rash! I feel your pain.
Bonjour votre problème était bien un message dynamique drive désactivé ?
Yes
Front swaybar must have been blocked or seized i guess creating excessive pressure.
Yeah I’m still not sure what it could have been!
Hi can it be fixed if the exle is blocked ? ?
Ik think mine is blocked i put something in it fore leak 😅😅😅
@@crazyharis id just do what george did and buy another good used one on ebay. They’re pretty readily available as they used the same part on the f01 as these e65’s
@@crazyharis There isn't anything you can put into the fluid to stop a leak
But you no show what you do inside the car i replace mine but how i do work
what symptoms were you getting
Error codes
Does anyone know if all E65 have this dynamic roll bar system?
They don’t
can you flush this system with PAS?
With PAS fluid you mean?
@@GeorgeAusters ye. They share the same fluid don’t they
Correct👍🏻
🙌🏼
👌🏻
Good luck getting a refund or exchange on those droplinks if you bought from autodoc.
My bmw its adaptove drive x5 2008
“That hurts”…. We’ve all been there lol
Haha definitely!
👍🏻🍾
The official fluid that's supposed to go into that system is expensive as all hell.
Any CHF is fine👍🏻
I lost this video and somehow did not subscribe. I have everything off except the vent tubes so that will be the next thing to get done. I am also replaceing the alternator bracket gasket and vacuum pump gasket as well.
Glad to help!