The never ending quest for perfect storage. What you've done is looking good. If strapping the tops together doesn't work, it looks like maybe a removable post or two on the left (open side) of the stack from floor to ceiling might do the trick. Thanks for another video!
Ah mate!! ‘The never ending quest for perfect storage’ has been ongoing for many years 😂😂 Good suggestion regarding the posts 👍🏼 Thanks for watching 😁🙏🏼
Thanks mate. No problem at all regarding the shout. Hopefully it might get you a few subscribers 😁 I like to be ready for most eventualities so keep as much as possible on the van and keep a few other bits in the training room too 😁 Thanks for watching buddy and good luck with your channel 🙏🏼
Awesome video as usual. Screwing that base unit to your floor of the van should stop everything from falling. I’m getting one for me now after seeing your video lol. Also those deep draws lol. It’s fantastic you are doing more videos again. I’ve learned so much watching you. Thank you
Thanks Ian. I’m not entirely sure that screwing the base down would be enough!! There’s a lot of weight!! Might be worth a try though 👍🏼 Thanks for watching 🙏🏼
The two stacks at the front. Just get an adjustable strap that pulls them together. If you think they might still go over attach a sash handle to the bulkhead and run the strap through it. That's the cheapo way 😊
My suggestion would have been to go to somewhere like Yoke Vans to get it kitted out the way you want it to utilise the full space of the van. But to strap those boxes down I done it by using eyelet hooks and a mini ratchet strap.
Thanks mate. To be honest, I didn’t want to spend an arm and a leg on the van. This kinda thing usually costs thousands! I’m hoping this will do me for a while 😬 Thanks for watching 🙏🏼
Just wondered why you stopped the auto lockout / key program stuff. I was just about to go down this route but wondered what you thought the pros and cons were on auto locksmithing. Maybe do a short RUclips video on it? Cheers.
Hi mate. I’ve spoken about it a couple of times before on pervious videos. But the auto work is too competitive where I am, so check out the competition in your area before you start! And you need to make sure if you do it that you do a good course! I’d recommend spending a good amount on the training to get all the knowledge! That was also part of my problem! The auto work used to stress me out too much as I didn’t have enough knowledge! I still offer auto lockouts though 😁 Thanks for watching 🙏🏼
That looks like it is going to be a nightmare. My OCD is driving me mad just looking at it, lol. It will be interesting to see how long it lasts before you have to re organise it. 😂
Looking good!!!! Utilising the space well. Question: What stops the drawers from sliding open with all that weight? I've had a couple of different types in my van and the drawers want to slide open going round corners.
@@brighton_locksmithI have quite a bit more weight in my nv200. I added sumo springs to the rear. Very fast install. Tire wear is excellent. And the van doesn’t wonder. Only down side is. Don’t go over railroad tracks fast at all
They are great aren’t they Chris. Yes, look out for my next video as I will be showing my quick grab lockout case which I use all the time 😁 Thanks for watching 🙏🏼
I am stil playing around with the set up, i bought a few of the official foam incerts then realised they fit the box's not the drawers @@brighton_locksmith
Hi there, you have them for around a year by now, do they still work fine, i am worried that pro stack can't hold the weight on the long run and daily use
Hi Andy, I started my locksmithing career around 7 months ago and no complaints. Just wondering if you’d do a video on how you built up your business? Do you have a website and do you think it’s worth it if so? Think that’s my next step, only advertising I’m doing at the minute is social media, leaflets and just got a promotion at a local festival where around 8,000 people go too. Any tips would be appreciated, cheers mate. Love the videos by the way , take care mate
10 pounds of stuff in a 2 pound box buddy, time for a bigger rig mate. I just put the same boxes in my little van, I posted a picture in my community posts. BTW.. Where did you put the bloody Wee bottle ? 🤣
It’s working great at the moment Jay so time will tell!! Hahaha!! The wee bottle is still in there 😁💦 Hope you’re well, and thanks for watching buddy 🙏🏼
Hi mate. Yeah, mines a Berlingo but the slightly longer version! It’s about 8-10inches longer than a standard Berlingo mate. It is very cosy 🫤 Thanks for watching 🙏🏼
@@iainfryer8078 I have 17 of the deep drawers, 2 of the deep boxes, 1 of the Dewalt double shallow drawers and 3 of the clear lid organisers. When I get a minute I’ll try and measure them for you and let you know the sizes 👍🏼
Iain, these are the sizes of the drawers and boxes etc. deep drawers are 160mm overall (internal drawer depth is 100mm) Dewalt double shallow drawers are 160mm overall (internal drawer depth is 45mm each drawer) Deep box is 310mm deep Organiser box is 110mm deep And shallow box is 160mm deep Hope that helps buddy 👍🏼
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Ive been upgrading my Storage with Tstack and pro stack the Deep draws are cool but you end up with tones of tubs when using them as draws lol
Hahaha this is true!
I gave all mine to a friend 😁
The never ending quest for perfect storage. What you've done is looking good. If strapping the tops together doesn't work, it looks like maybe a removable post or two on the left (open side) of the stack from floor to ceiling might do the trick. Thanks for another video!
Ah mate!! ‘The never ending quest for perfect storage’ has been ongoing for many years 😂😂 Good suggestion regarding the posts 👍🏼
Thanks for watching 😁🙏🏼
Looks more organised Andy! Them Stanley drawer boxes look pretty good build quality 👍🏻
Thanks mate. They are pretty tough boxes to be fair 😁
Thanks for watching 🙏🏼
Great job on the van buddy 👏 and also a massive thanks for the shoutout! Im amazed by how much stock you carry in your van very impressive 👍👍
Thanks mate. No problem at all regarding the shout. Hopefully it might get you a few subscribers 😁
I like to be ready for most eventualities so keep as much as possible on the van and keep a few other bits in the training room too 😁
Thanks for watching buddy and good luck with your channel 🙏🏼
Awesome video as usual.
Screwing that base unit to your floor of the van should stop everything from falling.
I’m getting one for me now after seeing your video lol. Also those deep draws lol.
It’s fantastic you are doing more videos again.
I’ve learned so much watching you.
Thank you
Thanks Ian.
I’m not entirely sure that screwing the base down would be enough!! There’s a lot of weight!! Might be worth a try though 👍🏼
Thanks for watching 🙏🏼
The two stacks at the front. Just get an adjustable strap that pulls them together. If you think they might still go over attach a sash handle to the bulkhead and run the strap through it. That's the cheapo way 😊
It’s all sorted Paul, thank you though.
Watch out for the next video for an update 😁
Thanks for watching 🙏🏼
No problems only solutions.
Keep up the good work pal..👍👍
Thanks buddy 😊🙏🏼
Hey Andy, Nice job sorting out the van. Looks to be very functional. I was worried about about those two front stacks falling over.
Thanks buddy.
Yeah I’ll sort something out 😁
Thanks for watching 🙏🏼
That’s one way to fill the van up 😂
My suggestion would have been to go to somewhere like Yoke Vans to get it kitted out the way you want it to utilise the full space of the van. But to strap those boxes down I done it by using eyelet hooks and a mini ratchet strap.
Thanks mate.
To be honest, I didn’t want to spend an arm and a leg on the van. This kinda thing usually costs thousands! I’m hoping this will do me for a while 😬
Thanks for watching 🙏🏼
Just wondered why you stopped the auto lockout / key program stuff. I was just about to go down this route but wondered what you thought the pros and cons were on auto locksmithing. Maybe do a short RUclips video on it? Cheers.
Hi mate.
I’ve spoken about it a couple of times before on pervious videos. But the auto work is too competitive where I am, so check out the competition in your area before you start!
And you need to make sure if you do it that you do a good course! I’d recommend spending a good amount on the training to get all the knowledge! That was also part of my problem! The auto work used to stress me out too much as I didn’t have enough knowledge!
I still offer auto lockouts though 😁
Thanks for watching 🙏🏼
Looks like a good set up Andy. Have thought of using the same box for my lockout kit could you show how yours is configured?
Yes sure. I’ll try and remember to show you on the next video 👍🏼
Thanks for watching 🙏🏼
That looks like it is going to be a nightmare. My OCD is driving me mad just looking at it, lol.
It will be interesting to see how long it lasts before you have to re organise it. 😂
No chance!! It’s gonna be a dream compared to how it was before!!
Thanks as always for watching 🙏🏼
You are kitted out mate, gonna make for some efficient jobs!
That’s the plan Jack!! Hopefully will make my life much easier🙏🏼
Thanks for watching 😁🙏🏼
Looking good!!!!
Utilising the space well.
Question: What stops the drawers from sliding open with all that weight?
I've had a couple of different types in my van and the drawers want to slide open going round corners.
Thanks Roy.
They are self latching so can’t open 😁
Thanks as always for watching 🙏🏼
@@brighton_locksmithAhhh that's great 🙂👍
Try just strapping the top two handles together on the large stacks
I think that’s what I’m going to do! Although I’d like it to look good and not like I’ve just screwed brackets! I’ll have a think 🤔 😁
Looks good mate but, my word, there must be some weight in that van. 😮
Yeah there is Kenny. But it’s fairly evenly distributed 🤞🏼Until I get in it 😂😂
Thanks for watching 🙏🏼
@@brighton_locksmithI have quite a bit more weight in my nv200. I added sumo springs to the rear. Very fast install. Tire wear is excellent. And the van doesn’t wonder. Only down side is. Don’t go over railroad tracks fast at all
I bought a few of the Dewalt ones love the Drawers, can we have a look at your lockout set up ?
They are great aren’t they Chris.
Yes, look out for my next video as I will be showing my quick grab lockout case which I use all the time 😁
Thanks for watching 🙏🏼
I am stil playing around with the set up, i bought a few of the official foam incerts then realised they fit the box's not the drawers @@brighton_locksmith
@@chrissadventuresinlockpick8267 It’s all part of the never ending fight to find the perfect setup! 😂 We’ll get there one day mate 😁
Hi there, you have them for around a year by now, do they still work fine, i am worried that pro stack can't hold the weight on the long run and daily use
Hi.
Still going strong and working like a great buddy 👍🏼
Thanks for watching 😊
How are they fairing in the van, have the drawers stayed sturdy or have you had any issues
Still as good as the day they were fitted mate.
Absolutely perfect and wished I’d done it ages ago 😊
Thanks for watching 🙏🏼
Can you make a video about how you became a locksmith. I'm 18 and would appreciate to hear your story.
Sure. I’ve been asked a few times recently to do this so I’ll do one this week 😁👍🏼
@@brighton_locksmith absolute legend, appreciate it!
Hi Andy, I started my locksmithing career around 7 months ago and no complaints. Just wondering if you’d do a video on how you built up your business? Do you have a website and do you think it’s worth it if so? Think that’s my next step, only advertising I’m doing at the minute is social media, leaflets and just got a promotion at a local festival where around 8,000 people go too. Any tips would be appreciated, cheers mate. Love the videos by the way , take care mate
Hey Matthew.
Drop me a WhatsApp message on 07805121782 and I’ll get back to you regarding this. 👍🏼
How did you stop the stacks from
Falling backwards when your driving a bit of shim wouldn’t stop it ? Just wondering if they fall over :-)
@@danielsmith-yq2lo Hi Daniel.
The rear boxes are fixed to with the middle partition and the other boxes are fixed to the bulkhead 👌🏼
10 pounds of stuff in a 2 pound box buddy, time for a bigger rig mate. I just put the same boxes in my little van, I posted a picture in my community posts. BTW.. Where did you put the bloody Wee bottle ? 🤣
It’s working great at the moment Jay so time will tell!!
Hahaha!! The wee bottle is still in there 😁💦
Hope you’re well, and thanks for watching buddy 🙏🏼
Get any more things, and you will need your good lady to follow you around in a second van 🤣
Haha!! Or I could just get a bigger van 😁
Thanks as always for watching 🙏🏼
Andy, it's time for you to get a bigger van. 😂😂
You could be right!! 😂 However, I’ll see how this system works first 😁😁
Thanks for watching 😊🙏🏼
That’s an awful way to have your van IMO. Upto you though as your van
@@GSK-mc7rw ‘Awful’ seems a bit harsh! But thanks for your opinion! Time will tell if it works for me!
What van is that Andy? I’m about to buy a small Berlingo and suddenly thinking it might be to squashy
Hi mate.
Yeah, mines a Berlingo but the slightly longer version! It’s about 8-10inches longer than a standard Berlingo mate.
It is very cosy 🫤
Thanks for watching 🙏🏼
FFS. Been wondering what to do with my layout and now it looks like I’ll be spending some money 😢😂
Haha Iain. It’s working like a dream so far! So much easier and quicker 👍🏼
Thanks for watching 🙏🏼
What sizes did you use
@@iainfryer8078 I have 17 of the deep drawers, 2 of the deep boxes, 1 of the Dewalt double shallow drawers and 3 of the clear lid organisers.
When I get a minute I’ll try and measure them for you and let you know the sizes 👍🏼
Iain, these are the sizes of the drawers and boxes etc.
deep drawers are 160mm overall (internal drawer depth is 100mm)
Dewalt double shallow drawers are 160mm overall (internal drawer depth is 45mm each drawer)
Deep box is 310mm deep
Organiser box is 110mm deep
And shallow box is 160mm deep
Hope that helps buddy 👍🏼