It's not just practical when a customer is near your van it makes you look very professional and very organised just the same as your appearance look professional and your works the same. 👍
Racking :) I've just found your page as a happy accident when looking for the essential items needed as a carpenter. I've watched through about 5 of your videos today and i'm learning so much from you. Thank you for sharing your knowledge with the internet :) Hitting the subscribe button
Racking: you kept it simple and functional which I guess makes it easier to adapt as time goes on. It that a short wheel base van, I noticed you showed the image of the 8x4s on the diagonal. Thanks for the video mate.
Cheers Tom, yes mate I like to keep it clean and tidy, makes life easier. Yes you can get 8x4 sheets in a short wheel base, I can get about 6 sheets of 18mm mdf with my current setup
Racking, love seeing how other chippies rack out there vans. Carpet on the shelves is a nice touch, really cuts down on rattle and if you point the carpet pile towards the van exterior it stops stuff sliding of the shelves as well.
Yeah I’ve been thinking about carpeting the base, I’m not sure yet, I normally go in all gun blazing but with this one I’m trying to think things through a little more
Good demo of how to fit out a van for the tools you use. I did get all the way through and thought the result was a good one. Of course, the difficulty is that our workflow tends to change over time, as do our tools. Having loads of little storage areas - as I have in the workshop - can be a problem. I, too, have become rather cluttered in that department, and have to have a periodic clear out, or I just end up spending ages looking for things.
Racking. Great video Lewis as usual. I done my van in lockdown with bits I had laying around. I wish I could start again, but as you know, it's a nightmare taking everything back out again .
Recently I helped my brother do his van, We built a slightly raised floor so full sheets could be stored without impeding access to the tool rack. Works surprisingly well. Fits around 10 sheets of 12.5mil plasterboard.
Racking . Great job mate maby put a small lip on front edge of shelves stop the boxes sliding out when goin round roundabouts I found this out the hard way 😂
Put some carpet down on the floor as it deadens the noise in the back when your driving and it helps to protect something you've manufactured when delivering. Racking
Racking, very interesting this, mine is messy and I hate working like that. I quite like how you sorted level and guide rail storage. Just wondering why you didn't go for lwb when you got a new van, would lwb not suit you better for this kind of work?
Yes the lwb was an option but ultimately I don’t really need it, this is the same van as I had before and it work fine for my needs so I stuck with it.
Good racking but personally I wouldn't have used glue as inevitably you'll be adjusting things in the next few months. I'd also have angled the shelves to stop items falling out when going round corners.
I didn’t use to glue racking but found that after a while it would start to come apart with all the movement of the van. Thanks for watching and commenting. Really appreciate it
I know it's such a small thing, but why not have one saw blade facing down and the other facing up so they don't get bent or put any strain in the handles
To be honest mate theses saws are pretty robust, I’ve been doing it this way for years and never had an issue with the saws bending ect. They just spring right back
Nice rack-ing !! Lol, Glad I didn't buy that bungalow, the noise from the speed of those motorbikes going past the house would drive me potty !!! haaha !
Racking. Makes a huge difference to productivity when you can get at exactly what you need straight away, really need to sort mine out now!
It really dose mark, not only that but means I can actually get materials in there now rather then just having tools all over the floor
Makes it easy to steal too. The long pull out drawers are the best approach with the added security they give
@@jcoul1sc I know, had mine cleaned out three times. Horrible.
It's not just practical when a customer is near your van it makes you look very professional and very organised just the same as your appearance look professional and your works the same. 👍
Completely agree kelvin, I was away taught turn up and time be polite and look tidy, goes along way 🍻
My van is a shithole at the mo mate . Got some ideas from ur vid . Thanks
Thank you for helping others and making this video
Thank you for taking the time to leave a comment buddy 🍻
Racking :) I've just found your page as a happy accident when looking for the essential items needed as a carpenter. I've watched through about 5 of your videos today and i'm learning so much from you. Thank you for sharing your knowledge with the internet :) Hitting the subscribe button
That’s great Charlotte, so glad that you’ve found the channel and hit subscribe, loads of videos to come 👍🏻
Racking: you kept it simple and functional which I guess makes it easier to adapt as time goes on. It that a short wheel base van, I noticed you showed the image of the 8x4s on the diagonal.
Thanks for the video mate.
Cheers Tom, yes mate I like to keep it clean and tidy, makes life easier. Yes you can get 8x4 sheets in a short wheel base, I can get about 6 sheets of 18mm mdf with my current setup
Racking. Just bought a new van and you've given me inspiration mate 👍
That’s awesome mate ! Let me know how you get on !
Racking. You made that look easy. Thanks
Thank you for your comment buddy 🍻
Great job! I'm not doing anything for a van, but it's nice to see how I could do racking for my tool shed
It’s noice to know my videos are interesting enough to watch even if you’re not planning on doing the project ! 🍻
Racking great vid - liked the technique with the jig saw
Cheers mark, it really helps with break out and seeing where your going 🍻
Racking, love seeing how other chippies rack out there vans. Carpet on the shelves is a nice touch, really cuts down on rattle and if you point the carpet pile towards the van exterior it stops stuff sliding of the shelves as well.
Yeah I’ve been thinking about carpeting the base, I’m not sure yet, I normally go in all gun blazing but with this one I’m trying to think things through a little more
Racking. Great layout for carpenters van. Look at trade tidy the sell apaper towel holder that your missing or first aid kit shelf
Nice one Paul, I have an idea for paper towel holder, as for the first aid kit that lives under the passenger seat in the front
Racking, I have the same van and have been struggling on how to rack it, thankyou for the inspiration 😁
That’s awesome buddy, let me know how you get on buddy 🍻
Racking. Great use of space Lewis I always love a look in the back of a tradesman's van !! Great Build and great video
Nice one Steve ! Much appreciated mate Lewis
Racking, love the videos as always! 🙏🏼 nice job
Cheers buddy! Much appreciated, glad you are enjoying them 🍻
The racking looks tidy , great job .👍
Cheers Chris 🍻
Cracking job mate , did my van this weekend as I was fed up trying to find things
I feel you Lee, it’s a right pain isn’t it mate 🍻
@@LTWCarpentry going to do the same as you mate , top job 👍
Super nice racking. Well done.
Cheers buddy, much appreciated 🍻
Top tier racking, that is mate
Cheers Leo 🍻
Racking, nice job mate. You can even take the rollers off your stand. And stand it up vertically. Gives you even more room. Makes a massive difference
Yes I have done this in the past, this works fine for now but I may change it
Racking - watched to the end. Good video! Subbed
Cheers buddy, glad to have you onboard 🍻
Keep on racking! nice video m8!
Good demo of how to fit out a van for the tools you use. I did get all the way through and thought the result was a good one. Of course, the difficulty is that our workflow tends to change over time, as do our tools.
Having loads of little storage areas - as I have in the workshop - can be a problem. I, too, have become rather cluttered in that department, and have to have a periodic clear out, or I just end up spending ages looking for things.
Yes I find the same, I end up just shoving stuff in compartments to get them out the way and end up massively cluttered !
Racking. Great video Lewis as usual. I done my van in lockdown with bits I had laying around. I wish I could start again, but as you know, it's a nightmare taking everything back out again .
Yes mate it’s all well and good thinking “I’ll do it again@ but in reality it’s much harder then that
good skills mate great job
Cheers Dave! 👍🍻
Racking. Great video mate
Cheers buddy 🍻
Recently I helped my brother do his van, We built a slightly raised floor so full sheets could be stored without impeding access to the tool rack.
Works surprisingly well. Fits around 10 sheets of 12.5mil plasterboard.
Yes a raised bed can work very well in a van, I stoped doing it as I can insulation a lot of the time and you can fit much in with a raised bed
Racking, great video!
Glad you enjoyed it
Racking, something very satisfying doing your racking in the van, I’ve redone mine 3 times in a year and a half and I’m planning on a 4th.
Ohh wow ! That’s dedication there !
@@LTWCarpentry dedication or OCD one of them lol, problem arises when you get a new tool, it then needs its own space 😂
Racking, great job.
Racking looks good mate
Cheers Chris, 🍻
Racking. Great video
Cheers Jacob 🍻
Racking. Great video thanks for sharing your lessons from your old van
Thank you for taking the time to comment Anne !
Nice racking!
Thanks! 🍻
Racking lovely job 👍🏻
Cheers Barrie 🍻
Racking, tidy job mate. Be tackling mine soon when I get some dry weather. So I can actually work outside.
Cheers Mike ! Keep me updated with how yours comes along mate 🍻
Good video, given me some good ideas
Cheers buddy, that’s awesome ! Let me know how you get on ! 🍻
Great job
Cheers buddy 🍻
nice job mate
Cheers buddy 🍻
Racking: great job and a good use of space, would put small bungee straps across all the boxes to hold them place 👍
I did think I would have to but to be honest they have been fine
Racking! Tidy work as usual mate, always good to get the van in some form of order!
Cheers buddy ! I’m so much more efficient when I can find stuff ! And I can get materials in there now !
Make sure to install all anti-theft measures you can find if you are leaving all of this in there overnight. Nice work, looks much more professional.
Def need a van tour mate. Racking
Will do buddy 🍻
A cracking van racking video. Loads of ideas for when I finally get round to mine thanks 👍🏻
Cheers Simon ! Keep me updated on your please buddy 🍻
Racking. great vid mate
Cheers Callum 👍🍻
Racking. Nice job mate 👍
Cheers buddy, much appreciated 🍻
Great build, well done !!!!! racking
Thank you very much Michael 🍻
Racking, Nice job
Nice one buddy 🍻
when you used the jigsaw you did it underneith, is that how its meant to be done?
Its easier to follow the line underneath and it gives a cleaner cut on the surfice 🍻👍
Love the new racking, made good use of the space on the drivers side. Racking 😂
Nice one Shaun ! Yes mate I’m well happy with it 🍻
Racking. Spot on, as always Lewis 👍🏻
Cheers Neil ! I really appreciate it 🍻
Nice bit of racking Lewis, love the upside down jig saw skill👊
Cheers hoggy ! I find jigsaws much easier to control this way round
nice fit out basic and functional racking
Cheers buddy, simple is sometimes the best way isn’t it 🍻
Nice racking
Cheers David 🍻
Really good racking Lewis. It’s so good when you can find everything 👏🏼👍🏼
Thanks as always Mandy ! I can’t stand a messy van ! Really slows down production
Racking . Great job mate maby put a small lip on front edge of shelves stop the boxes sliding out when goin round roundabouts I found this out the hard way 😂
Cheers buddy, I have done mate, it wil the bits of timber I was adding in the video 🍻
Racking love it
Thanks Matt, much appreciated! 🍻
Racking. Good job makes my effort look awful. I’ll have to learn how to do that scribing as I wasn’t aware
I can do a video on it if it helps buddy
@@LTWCarpentry that would be amazing thank you 🙏🏼
Good job 👍 (Racking)
Thanks 👍
Racking. Nicely done buddy, what length screws did you use to fix to the plywood on the van sides?
Cheers Dave, I used 30mm screws for the most part
@@LTWCarpentry thanks buddy
what size ply did u use mate
Does weight distribution matter when putting up shelves?
I have done this in many a van and I know many others the have the same and it’s never been an issue buddy
Racking. Have you tried getting the square out, yet? Looks mighty tight to me…
Square comes out no problem at all 👍🏻
Racking. Looks great mate. Nicely organised 👍
Cheers Rob ! You’ll be pleased to know I’m keeping it that way 🍻
🤣👍👍
Racking, nice job, keep it all neat 👍
Thanks Gavin ! 🍻
so glad
I subbed 18-24 months
Like I said glad I did, ur content and presentation style is brill
Cheers buddy ! I really appreciated that ! And I’m also really glad you subbed ! Mean a lot ! 🍻
racking starting to look good mate
Cheers Chris ! Much appreciated 🍻
Racking . Good organisation is key 👏👍
Cheers buddy ! Much appreciated ! 🍻
Racking. Looks good Lewis 👍
Cheer Vic 🍻
Racking, another job well done Cheers
Cheers buddy ! Always good to see you in the comments 🍻
Do you have a link for them compass pal
I don’t mate, it’s on Amazon though 🍻
@@LTWCarpentry 2 for 7.99 bargine
@@aaronbell8527 you got a link 😂😂
@@LTWCarpentry eBay buddy I
Got 4 never used them yet 😂😂
Good to see another good video doing the racking keep up the good work and have a good Bank Holiday simon
Thank you very much Simon ! And you also buddy 🍻
Racking, Great job as always mate 👍
Cheers Ian ! Great to see you in the comments 🍻
Put some carpet down on the floor as it deadens the noise in the back when your driving and it helps to protect something you've manufactured when delivering. Racking
I have carpet that I lay down when needed buddy, I don’t keep it down constantly as I like use the leaf blower
@LTWCarpentry I use a leaf blower but I also get my wife to hoover it out cos if I hoover it she'll still go over it.🙂
Racking, very interesting this, mine is messy and I hate working like that. I quite like how you sorted level and guide rail storage.
Just wondering why you didn't go for lwb when you got a new van, would lwb not suit you better for this kind of work?
Yes the lwb was an option but ultimately I don’t really need it, this is the same van as I had before and it work fine for my needs so I stuck with it.
@LTWCarpentry got it. Going to copy your racking a little bit, thanks for sharing
racking . can you still get 8x4 sheets in there?
Yes standing up on the angle
Good racking but personally I wouldn't have used glue as inevitably you'll be adjusting things in the next few months.
I'd also have angled the shelves to stop items falling out when going round corners.
I didn’t use to glue racking but found that after a while it would start to come apart with all the movement of the van.
Thanks for watching and commenting. Really appreciate it
I know it's such a small thing, but why not have one saw blade facing down and the other facing up so they don't get bent or put any strain in the handles
To be honest mate theses saws are pretty robust, I’ve been doing it this way for years and never had an issue with the saws bending ect. They just spring right back
Racking, looking good.
Cheers Roy ! Much appreciated 🍻
Good job with the racking
Cheers buddy ! Much appreciated ! 🍻
Racking, great set up
Cheers Alan 🍻
Racking 👍well organised
Cheers Paul 🍻
Racking turned out well m8, mines constantly evolving.
Cheers Dean, yes my old one did aswell
Racking looks good
Thank you very much Kevin 🍻
Racking mate another great video 👌
Cheer brain ! Always good to see you in the comments buddy 🍻
Racking nice job mate
Cheers bill 🍻
Nice and neat 👌
Cheers George ! Much appreciated ! 🍻
As expected, another good video, Racking.
Cheers Chris ! Much appreciated 🍻
Nice rack-ing !! Lol, Glad I didn't buy that bungalow, the noise from the speed of those motorbikes going past the house would drive me potty !!! haaha !
😂😂😂 cheers mate !
intresting racking video
Cheers buddy 🍻
Racking, another tidy build mate a tidy van makes a big difference to how you work I think.
It really dose warren and speeds up productivity, knowing where your studs is is so important
@@LTWCarpentry I think the other side would be good for some hardware storage maybe?
@@warrencash5577 yes I agree, I do need to carry some small parts for call out jobs
Racking
Nice n tidy now 👍🏻👍🏻👍🏻
Nice one Stuart ! Much better now mate 🍻
Racking 👍🏻
Cheers buddy 🍻
racking good one mate
Cheers Martin ! Much appreciated 🍻
Racking Another good video.
Cheers Paul ! Much appreciated 🍻
Racking nice one
Cheers buddy ! Much appreciated 🍻
Nice job mate
Cheers Ken !
Racking, it suits the purposes mate
Cheers tony ! 🍻
🔥🔥🔥🔥🔥🔥
Racking!
Racking 👍
Cheers Andrew 🍻