This is why you have to have power surge protectors on your homes, these computers n the chips should be still usable fir new projects not scrap but I'm sure they got tons of them In the landfills
Excellent recovery BGA chips are usually 1 % gold by weight. You should still add sulphuric acid to the aqua regia to get rid of any lead that might be present. Also use distilled water when boiling in HCL the chlorine in tap water may dissolve some of the gold. Although you can still get it from your stock pot.
Which BGA chips? These ones here have 1% gold by weight only in the top part. And this is where all the bond wires are.... If you use the whole chips, it is much less.
@@TrinityGoldRecovery then you'll need to pour a little bit at a time, because the solution is quite reactive to the Na2S2O5 and will foam up big time over flowing your container with the gold solution.
America🇺🇸 We Fought For our Freedom & Constitutional Republic... One Nation Under God with Liberty & Justice for All!🙏🇺🇸🏆 P.S. What kinda blow torch is that? It does a Great job and looks like it go's the distance. 🎖
Urea until it doesn't fizz any more, use just as much nitric as necessary and you could skip this step. Boiling the solution for a while also removes excess nitric. SMB until no more gold is in solution. Test with stannous chloride.
My brother, how did you reach this stage of pure gold purity without using nitric acid before and after aquargy? There must be something missing in the video.
hello, have you used in the first urea filtrate? or just sodium metabisulphite? , I am from Argentina and I am also learning to do mineria watching your videos. thank you very much!!!!
OMG very nice yield !! The bottom parts they just don't worth it ...if u have a kilogram maybe you get some miligrams of gold. Again a very nice vid a perfect work !! and a new way for prosesing top bga with out hso4 my greetings from cyprus !!
Guys learning, the chemicals the easy part, a monkey can do it, and all materials on Amazon or AR Walmart! The physical work sucks and is worth it if you have a to of material to process. But you should learn 1st by refining a 2-3gram 10k gold ring. Its easy, cheap, and you learn what happens each step. Most process to little to see the gold their 1st time (I did 3 times). I moved to karat scarp, learned 1st try, and now have done ozts!
And now show ppl what is happening to all that waste chemicals after u used them in this proces, how u utilize them? or u just pour that into ground behind ur house?
Well i like watching your Chanell however there is one particular problems with this video The gold you extracted is not 24k .... Hence when you get a green solution and you drop gold from it it’s contaminated with other metal/metals probably zinc or nickel. You should have neutralize by adding specific chemical before even making AR. What you need to do is give the washed material a bath in just nitric acid with hydrogen peroxide. By doing that you will remove all base metals that could contaminate the solution later and makes the process much easier. Otherwise the whole process is just useless as you recover contaminated gold which you should reprocess again by bathing it in nitric , then ar again and dropping and melting. I like your content but please make sure that you show the stuff in a proper way.
BGA top part hasn’t any lead or nickel, only gold wire bonding few amount of copper... You know copper doesn’t drop as gold sediment with smb adding... And I filtered the AR twice of time... So the gold has drop as 24K... When your gold sediment is not smokie or cloudy as in bottom of water body and looking cristal clear_ you can going to melt your gold powder. .. No problem... It's a experience...
Very nice ashing process..i' ve learned another informative ideas..Philippines
I from México...
Is excellent...your job...my friend..
Gold gold gold...hoooo yes
❤️❤️
du cameroun🇨🇲. mersi j'ai travail Grace a tes videos
I am from BANGLADESH..I love this your job.. This is greet.. 😀
❤️❤️❤️
Hi mojib
Philippines. We're famous because of island.
I will visit your country in near future
yeah.. congratulations sir, very nice material..lots a lots of gold that kinds of stuff..🥰🥰🥰🥰🥰🥰🥰
❤️❤️❤️
Your experiment is awesome
Sir India i am also recyclor e waste i like your process tnq
This is why you have to have power surge protectors on your homes, these computers n the chips should be still usable fir new projects not scrap but I'm sure they got tons of them In the landfills
Thanx for dis info.. From philippines
greeting frm Indonesia, thanks for sharing, GBU....
Thank you too
I follow you from Iraq
I learned a lot from you, thank you
❤️❤️
ممكن شرح مفصل
@@عبقالنرجس-ي7م تفضل عن ماذا تريد الشرح
مافهمت ولاشي اولأ وثانيأ الطرق حقيقه نستخرج منها ذهب يعني انته مجربها شخصيأ
@@عبقالنرجس-ي7م
نعم حقيقيه واني اختصاص معادن واستخرج الذهب والفضه بنفس الطريقه وغيرها
I am living in India
this is a best work gold recovery
❤️❤️
Yes but how we find this ic chips can you help me
Yes why not dear
Muje ye chip Leni hoto kha milegi ❤️ plzz tell me
Excellent recovery BGA chips are usually 1 % gold by weight. You should still add sulphuric acid to the aqua regia to get rid of any lead that might be present. Also use distilled water when boiling in HCL the chlorine in tap water may dissolve some of the gold. Although you can still get it from your stock pot.
Wow
Sreetips is that you?
@@mspeed3kb966 lol 😆
Which BGA chips? These ones here have 1% gold by weight only in the top part. And this is where all the bond wires are....
If you use the whole chips, it is much less.
Very nice bro
this is a awesome your working
i happy
i am following your work
Thanks
I'm from Scotland and we're famous for GOLD☀️🥇🤓👍🏴
😬😬😬
Enjoying your videos from India🇮🇳
What country are you from?
Hi dear friend
@@refineriesallmattels8658 hi buddy
@@VishnuKumar-ik5we where are you frome India....?
@@refineriesallmattels8658 Tamil nadu
And you
@@VishnuKumar-ik5we delhi
what do you make the melting crucibles of, what material?
I like your vídeos...
I work now this...
Gold gold gold..gold..
Very good my friend...you great..
❤️❤️
Is grate, The down parts have nothing to be recover?
6:54 do you use the black water or do you throw it away??
Sorry my friend.. My question...
???
Not necesary neutralize the solución whit urea????
not necessary at all
@@TrinityGoldRecovery then you'll need to pour a little bit at a time, because the solution is quite reactive to the Na2S2O5 and will foam up big time over flowing your container with the gold solution.
America🇺🇸 We Fought For our Freedom & Constitutional Republic...
One Nation Under God with Liberty & Justice for All!🙏🇺🇸🏆
P.S. What kinda blow torch is that? It does a Great job and looks like it go's the distance. 🎖
do you use the black water or do you throw it away
Hi, i want to ask something; you dont use urea for neutralise HNO3 ?
That's super impressive 👏 👏 👏! Over a pure $250 gold button recoverd! 💵 💴 💵 💴
Chào bạn, Khi bạn đốt cháy IC, bạn cho nước máy vào để cho nắng xuống, rồi chắt nước lấy cắn, Không biết có mất vàng không vậy
Awesome return 👍. Great vid
Thanks
Hi bro...hoo...is excellent...tour vídeo my friend..
Is gold 24k...
Hoooo ver y good ...
:)
I'm Colombia South América.
And We are famous for the Best Coffee of the world
And white sugar also 😎
Greetings. Im happy for this though its like the 10th time im watching this same video, its at least explicit and hope to get thesame results.
Very Very nice 👌
✌️✌️
Good morning, excusme, do you meet Merril-Crowe process?
Hello, onde consigo comprar um triturador eletrico desse..?
what a milkshake, somehow I can not find, I would probably buy thank you
It’s a customized grinder made by myself
@@TrinityGoldRecovery Thanks a lot, pretty good work.
Welcome!
May I ask what is the ratio of UREA and SMB to the solution? Thank you very much!
Urea until it doesn't fizz any more, use just as much nitric as necessary and you could skip this step. Boiling the solution for a while also removes excess nitric.
SMB until no more gold is in solution. Test with stannous chloride.
This was a great video. Entertaining and you got a good yield!
Thanks
Very very good my friend
Thanks
Thank you for helping to educate friends
❤️❤️❤️
Amigo para que se añade acido sulfurico??
Whats the purpose of adding NaCO3 and Borax while melting?
From India. ❤️
Very very nice...wooooow
❤️❤️
My brother, how did you reach this stage of pure gold purity without using nitric acid before and after aquargy? There must be something missing in the video.
what did u do with the bottom parts ?
Recovered gold by using the aqua regia process.
There will be another video coming for the bottom parts.
What filtre use?
Super video
Synthetic tissue clothes, nowadays many of shopping bag made by this types synthetic tissue clothes ..
Dear sir,
Can we use distilled water or rain water instead of normal water?
i don’t see any problem using normal water 🤔.
@@TrinityGoldRecovery OK sir. Thank you for yours reply.
You are the jenius
Your videos are great. Did you make the blender yourself or did you buy it somewhere. I would like to get one for myself
Made it by myself
Do you think it would be possible to do a video on how you made it. It's amazing
@@TrinityGoldRecovery yes! İ want to learn how to make my pro blender.
I think just modified the motor, replaced with more powerfull motor compare with originally...
Tks and Gretings from Germany.
Thank you too!
what if deal with bottom, will it's get more gold?
why not, obviously more gold😇
I am from Pakistan and we are known. Pak india friendship
Keep up the good work. 👍
😍❤️😍😍❤️
My friend, we need a palladium job. Are you ready to make a video? Thank you
Inbox us on facebook
What happens to all the chemicals that are on the ground when it rains?
There are no chemicals on the ground when you neutralizes it.
I your work very do like
❤️❤️
Is the chemical formula of sodium metabisulfite Na2S2O5?
As far as I know, yes it is! 👍🏴
what is a temperature for gold powder dry when i dry
gold powder kam ho jata hai
what can i do work
do you help me
Just let the airgun do the work
What kind of grinder was used to make it a dust
It’s a customized grinder. I made it by myself
Great video.
Can you do a video how to process bottom part please.
There is already one.
Scroll back to our old videos you will find it
@@TrinityGoldRecovery Thanks will check it out.👍
What water are using recovery gold
Normal tap water
hello, have you used in the first urea filtrate? or just sodium metabisulphite? , I am from Argentina and I am also learning to do mineria watching your videos. thank you very much!!!!
Marvelous! how do you make your crucibles
There's a video coming for it😊
very nice you works
Thanks
Nice Video , I have a question why in the dust do you use sodium carbonate? Do you do it every time you want to melt gold dust?
It helps to keep the gold powder together while melting.
Otherwise all the gold will blow away while melting by the blowtorch
@@TrinityGoldRecovery borax works as well
From India
I think a #SREETIPS reaction video would be great 👍
Im roy from brasil!!
OMG very nice yield !! The bottom parts they just don't worth it ...if u have a kilogram maybe you get some miligrams of gold. Again a very nice vid a perfect work !! and a new way for prosesing top bga with out hso4 my greetings from cyprus !!
❤️❤️❤️😍
Thansk frend
what is the chemical formula of sodium metabisulfite?
Na2S2O5
@@TrinityGoldRecovery thank you
Are you a buyer of PCB?
Poland, thank you.
Шапки не дожог. Данные шапки лучше серной кислотой растворять. Большие потери.
God bless you
The sign of a true professional is using aunt Edna's china & burning toxic waste in her skillet
Guys learning, the chemicals the easy part, a monkey can do it, and all materials on Amazon or AR Walmart! The physical work sucks and is worth it if you have a to of material to process. But you should learn 1st by refining a 2-3gram 10k gold ring. Its easy, cheap, and you learn what happens each step. Most process to little to see the gold their 1st time (I did 3 times). I moved to karat scarp, learned 1st try, and now have done ozts!
Second time ive watched.
Nice Sr super
Thanks
Hello sir, how are you from
Nice
ELVIS FROM CAMEROON WEST AFRICA
My friend twice did not use urea
That's not necessary
Are you Bangladeshi...?
Wow keren
have you ever try to use NA2SO3 to replace SMB?
No
do you think it will be working too？
Nice sir
Thanks
Aplauso pelo resultado garimpador.
And now show ppl what is happening to all that waste chemicals after u used them in this proces, how u utilize them? or u just pour that into ground behind ur house?
First we add urea to neutral the acids.
Then mix it with a lot of water and then we dispose it.
@@TrinityGoldRecovery pour it into the river?
Well i like watching your Chanell however there is one particular problems with this video
The gold you extracted is not 24k ....
Hence when you get a green solution and you drop gold from it it’s contaminated with other metal/metals probably zinc or nickel. You should have neutralize by adding specific chemical before even making AR. What you need to do is give the washed material a bath in just nitric acid with hydrogen peroxide. By doing that you will remove all base metals that could contaminate the solution later and makes the process much easier.
Otherwise the whole process is just useless as you recover contaminated gold which you should reprocess again by bathing it in nitric , then ar again and dropping and melting.
I like your content but please make sure that you show the stuff in a proper way.
BGA top part hasn’t any lead or nickel, only gold wire bonding few amount of copper... You know copper doesn’t drop as gold sediment with smb adding... And I filtered the AR twice of time... So the gold has drop as 24K... When your gold sediment is not smokie or cloudy as in bottom of water body and looking cristal clear_ you can going to melt your gold powder. .. No problem... It's a experience...
Please sir help me every chemical full name. Video please sir.
Why don't you google it
Yes thank you❤
Please copper made gold farmula,
3.52 grams how much pleas reply
Yes??
Total howmany kg is this
Top and bottom combine 750g total
Спасибо
The U.S. & Me! 😜
😆😆😆
Make a video on mlcc
coming soon
What is top parts ?
the black parts
@@TrinityGoldRecovery good job, does the bottom part also have gold
Dam u need like at least 1000 of them
Nice 👍
India
India