I told ya! I put the vented version through the onside scapula, the top of the heart, and out the sweet spot on the offside and buried 6 inches in the dirt on a 33 yard shot at a 160 lb 8 pointer. The one in my profile pic on here. That hole in the metal looks like a 20 gauge slug hole. I have had zero issues with the flight. Anyway, thanks for testing them and sharing! They have discounts all the time. Also, Lusk has a code on his site. I am sure you will have one in your quiver this season! You're welcome!!!
Haha, I literally did this one because you mentioned it. Man I can't lie, I really didn't think much of it initially. Seemed like a muzzy in my head but better built. Brooooo that hole in the metal blewwww my MIND!!! Literally like a shotgun slug. I have 11 more heads to test lol, but so far on the fixed blade side, I just don't know if you can beat that. My goal is to find 1 mechanical and 1 fixed blade. Really appreciate it man. Didn't disappoint at all. Very impressive.
Yea i had those. Tested them a little with the Rexpid Big III video, one of my first ones. They aren't as good as these in my opinion. No where near as sharp. But out of the ozcuts I've shot, they are waayyyy better then those kreatures lol.
@@SouthernDrawTN I’ve heard good things about this broadheads. You might check out the Annihilator Broadheads, they are made with the same process, milled out of a solid piece of steel.
Man I was thinking about it and wanted to but I've tested 15 broadheads, about to be 16 and bought pretty much all of them. So may have to wait until turkey season something. I've heard good things about them though. I just feel these are kind of similar like you said. So may wait unless I can get them to send me one to test with
I've bought 15 heads so far. I may have to get the annihilators though and test them as well. Those were the broadheads I planned to use before I started testing. Not sure how I never bought a pack lol.
BTW have you seen the two blade single bevel heads the got with the 4 blades in the center? I was looking for those but they still aren't for sell. I'd really like to try those.
@@SouthernDrawTN idk if I have actually I look into them too. I bought some black widow innovations arachnids and I’m ready to see what they will do to an animal.
Hello I hope you are well. I have seen the videos on your channel. Your video is very good. But your video optimization is very poor. Also given below are some reasons for not getting views on your RUclips channel videos 1. SEO Score is very low 2. No Title - Description - Tag SEO friendly 3. No Share Social Media Platform and many problems on your RUclips Channel Immediately need SEO for your RUclips channel. I am waiting for your response. Thank you.
I told ya! I put the vented version through the onside scapula, the top of the heart, and out the sweet spot on the offside and buried 6 inches in the dirt on a 33 yard shot at a 160 lb 8 pointer. The one in my profile pic on here. That hole in the metal looks like a 20 gauge slug hole. I have had zero issues with the flight. Anyway, thanks for testing them and sharing! They have discounts all the time. Also, Lusk has a code on his site. I am sure you will have one in your quiver this season! You're welcome!!!
Haha, I literally did this one because you mentioned it. Man I can't lie, I really didn't think much of it initially. Seemed like a muzzy in my head but better built. Brooooo that hole in the metal blewwww my MIND!!! Literally like a shotgun slug. I have 11 more heads to test lol, but so far on the fixed blade side, I just don't know if you can beat that. My goal is to find 1 mechanical and 1 fixed blade. Really appreciate it man. Didn't disappoint at all. Very impressive.
Ozcut Hurricane looks pretty awesome as well. Lusk just posted it. Another sweet hole!
Yea i had those. Tested them a little with the Rexpid Big III video, one of my first ones. They aren't as good as these in my opinion. No where near as sharp. But out of the ozcuts I've shot, they are waayyyy better then those kreatures lol.
They are sharp right out the box. I tried tighten one on my arrow by hand and sliced my index finger.
Yea no joke. It's like sneaky sharp. Can't tell it's sharp until it grabs your finger a little.
Four blade fixed heads always feel more sharp because the bevels meet at a more acute angle compared to a 3 blade
Ahhhhhh, that actually makes sense. We'll they definitely did a great job with this broadhead man. Love the hardened steel, feels solid to me.
@@SouthernDrawTN I’ve heard good things about this broadheads. You might check out the Annihilator Broadheads, they are made with the same process, milled out of a solid piece of steel.
Man I was thinking about it and wanted to but I've tested 15 broadheads, about to be 16 and bought pretty much all of them. So may have to wait until turkey season something. I've heard good things about them though. I just feel these are kind of similar like you said. So may wait unless I can get them to send me one to test with
Try annihilators next man!!
I've bought 15 heads so far. I may have to get the annihilators though and test them as well. Those were the broadheads I planned to use before I started testing. Not sure how I never bought a pack lol.
BTW have you seen the two blade single bevel heads the got with the 4 blades in the center? I was looking for those but they still aren't for sell. I'd really like to try those.
@@SouthernDrawTN idk if I have actually I look into them too. I bought some black widow innovations arachnids and I’m ready to see what they will do to an animal.
Bro I just looked at those arachnid broadheads. I may have to pick some of those up to try lol.
Hello
I hope you are well. I have seen the videos on your channel. Your video is very good. But your video optimization is very poor. Also given below are some reasons for not getting views on your RUclips channel videos
1. SEO Score is very low
2. No Title - Description - Tag SEO friendly
3. No Share Social Media Platform and many problems on your RUclips Channel
Immediately need SEO for your RUclips channel.
I am waiting for your response.
Thank you.
There has to be a million of you guys with the same copy/paste message lol.
When you’re talking 4” do mean if the broadheads hit within 4” of the field point you’re good with it? Man, I hope not because that is pathetic.