Axe FX 3 with Koch ATR-4502 Power Amp
HTML-код
- Опубликовано: 23 авг 2024
- Demo of Koch ATR-4502 Power Amp with Axe FX 3. The Koch ATR-4502 is a two channel tube power amp (2x12AX7's).
www.koch-amps.c...
For this demo, I am running from the unbalanced (1/4 inch) output of the Axe FX 3 into channel 1 of the ATR-4502, and then speaker out into my Indigo Amplification 2x12 cab with vintage 30's.
Signal chain:
Guitars:
Gibson 1960 Reissue Les Paul - Mama Pickups
Barajas Strat - Zexcoil Pickups
Fender Telecaster HS Professional
Yamaha Revstar RS620
AXE FX 3
KOCH AMPS ATR-4502
Indigo Amplification 2x12 V30's
Mics:
Sm57 (on the grill)
Sony C100 (about two feet away)
0:06 Intro & Explanation
1:17 JCM800
3:28 Clean w/ Delay & Reverb
4:44 Bassman
6:06 Lead Tone
www.CamiloVelandia
I watch a lot of guitarists. You always are so musical and pleasing. Effortless with beautiful lines and chords. Truly one of my favorite guitar players.
Nate thanks so much! Very kind words!!!
I got the Koch ATR-4502 for my pedal board - it's a pure killer!
Cool!!! How are you using it? Running from ur board straight?
Great playing! Also nice cover of Continuum!!
Ahhhh! Man that Continuum was fucking beautiful! Respect!!
Camilo is always so damn great!
Tremendo sonido y excelente tu toque como siempre !!! gracias por compartir tu música y experiencia !!! abrazo grande hermano !!! éxitos !!!
great demo Camilo. well done !!!
Thanks Daniele!!!!!
Awesome!
Thank you Camilo!
Thank you!!
!!! 😎😎Sonidazo men !! Excelente.. !!
Rocktastic!
Killer licks start @ 3:30 Pat Martino style but with more Neo-Soul flavor IMO // i'll be digging on that one
Hola Camilo, tocas super!! hasta ahora viendo este video... Pregunta, cuanto volumen dispara? Da para ensayar con una banda de rock o metal? O para gigs en bares pequeños? A partir de que volumen se quiebra el sonido limpio? Disculpa tantas preguntas... Estoy evaluando si comprar este o un matrix... Actualmente uso dos friedman en stereo... Pero me acabo de meter en un helix para usarlo con un power amp.... Saludos desde panama
that chord at 4:04 is so beautiful.
Hey Camilo, thanks for the good work! Not sure if you will read this. Could I check if there is any changes I would need to do to my axefx preset layout is not program for output to monitor speakers if I am to move to real power amp and cab, other than switching of poweramp and cabinet simulation? Many thanks!
How does this compare to the matrix gt1000fx?
If you buy one you can tell everyone you have a big Koch!
Hi Camilo.. Thank you for this video. So in the end.. do you find that the ATR-4502 adds some of that warm tube mojo? Just wondering if it is worth the extra $$. Thanks man!
Sometimes it's hard to tell from a video. Just wanted to hear your opinion on what you heard "live".
Hey brother. It certainly adds some “squishiness” to it. I think the real magic of this setup is being able to use and interact with your real cab. Feedback and things like that are more accessible
Hi Camilo! Do you think its loud enough to practice with loud metal band? 70W with 16 Ohms
How loud is the sound? More than Marshall 100 watt head?
Hey Camilo! For the Axe, which do you prefer. This type of set up or FRFR?? Thank you bro, sounds badass!!
This power amp setup works well when you have cabs that you really like the sound of. Also, if you go to a rehearsal studio or a gig, you can just go from the power amp into the speaker of the backline amp. FRFR is convenient for interaction with speakers... feedback, sustain, etc.... I personally just go direct. The less I have to carry to a gig or on a plane, the better for me. With the exception of the sustain/feedback/speaker interaction, I don't find a difference in the tone that really influences my decision to change my setup.
@@CamiloVelandia Great input man and thank you!!
Do I need a power amp if I’m playing at home and don’t gig? What do most people do?
Bassman was
My fav!!! Suena!
😘😘😘😘
Hi there, I have one question for you about this amp. It's only 90watts, can it hold it's own against say a 300 watt Rocktron Velocity or a 100watts all tube head? I am going to try one however I'm sceptical that it will be loud enough for me and my band.I have to say it sounds great with your AXEFX, really good.
Rabid of course it will.... a 50 watt Marshall is nearly as loud as a 100 watt Marshall. The biggest difference will be the number and efficiency of the speakers you use.
I got one and so far so good. Do the fans only come on when the unit heats up? So far it sounds very good. I haven't played it yet with my band, but I think the volume is there, I can tell on 50% it's very loud. It's all my drummers fault though!
I love my Koch power amp! It's sounds it's best with a 12" or 2x12. Does not sound that great with 4x12s
Excelente Camilo. No pesa mucho el ATR?
Gracias bro!! Peda 5.5 kilos/12 libras por el chasis con los tubos.
Is the axe fx III powered unit? I though it needs a powered option be it powered monitors, pA or a power amp that you are using.
The unit works direct out of the XLR outputs. Some people like to use their own cab, in which case, you need a power amp. I don't use it like this very often. I usually go direct. Just out of convenience
Camilo, do you prefer the sound with the power amp and real speaker cab? I just got a used Axe 2 Mi 2 and I am trying to get a good sound out of it. I am completely lost on this thing. Lol I have experience with the HX stomp and Powered Kemper though. It took me a little while with the HX stomp to get a good sound but now it is great. I found that ownhammer IRs and the 12” Headrush powered cab sound great with the stomp. The Axe sounds okay but not great through that speaker. The Kemper sounds terrible through that speaker. What do you prefer for a great sounding frfr with the Axe?
So, if power amp modeling is off, why does it say JCM 800 on the first part of the video. What am I missing here?
Basically Im using the preamp of the JCM800... tone stack, drive, etc... no power tube section.
OK, I guess I need to get more familiar with the Axe FX 3...! Thanks.
Yeah! Basically fractal models preamp and power amp. You can bypass power amp and keep the preamp section. Most people love preamp distortion of many famous amps, so thats why that would make sense. If you check the tabs in the amp block you can see what the preamp and power amp settings are.
Bypassing power amp modeling in a modeler is a fools errand IMO. Even when you’re using a power amp.