Thanks for the info, and I tried render scaling, but it created for me to some pixelated cloud edges, somewhat like vertical lines in them when flying. It varied depending on the scaling set, DSR however although the same effect occasionally was much less noticeable when running my 1080 monitor at 2560 x 1600.
Great video. Thanks for the tips. I will try this on my system. I'm a long time watcher first time question. I see you are running an Intel setup. I have an AMD setup. In your settings you have AMD FEDELITYFX SHARPENING turned off or to zero. Now, being as i am running an AMD, where do you recommend me slidding this bar too? Or should i put this to zero as you have it? Tnx
Native 4K DLSS 2 .... minimises shimmer, especially on the straight edges of glass cockpits. The difference compared to reducing rez and TA is massive. Not everyone has a bloody 4090.
A couple of things. If you are running 4K, you are likely to have a high end graphics card anyway, secondly Q8Pilot was refering to specifically 2K displays where shimmering was more pronounced, but anybody can oversample, it's an informed opinion which we can use to our advantage or not.
Thanks! This helped ne a lot! Just installed MSFS and set these settings! By the way, when will you fly the colimata Concorde and the md11 in xplane12?
My monitor is for 4k 60FPs since I got it for my Xbox series X but I play MSFS at 2K and I have a 3070. Should I stick with 2K or have it at 4k resolution in the sim? I also cap my FPS at 40
hello sir , i have problem screen flickerin on msfs interface page, than in sim, in other came and apps no problem. only when msfs main page show up , fps is high 80 - 110 with ultra setting with 2k, no problem with machine i have unstall addon, change monitor same issue, change to DX11 from dx12, stop G-SYNC, ENABLE V-SYNC SAME PROBLEM, bought new Pc because of this can't enjoy my flight, also change to deffrent refresh rate of my monitor, nothing works, really sad, please if you know anything help. will be really appriciate. thanks
I run a 4080 on a i7-13700 and the worst for me is the shimmering on my flight displays in the add-on aircraft like FBW or Fenix. It’s like the writing on the displays is to thin or to “sharp” I’ve tried every setting combination imaginable to fix or reduce it. It only seemed to have gotten like that since upgrading from the Standard MSFS to the deluxe version.
Q8, please don’t use TAA, it’s the worst AA. It should never be used by anyone. If you have a top GPU, a 4090 in our case then all it does is add unnecessary blur. Just upscale to 4k and use DLAA
As always, it depends on peoples system and you cannot make a definitive statement like that. For most TAA gives crisper display graphics for example. And...not everyone can give Nvidia the amounts of money they want for a ridiculously overpriced 4090 can they!
TAA works in an exact way, it doesnt matter what the system is. The temporal effect smudges frames together. You can of course sharpen that out but its well known that TAA is a poor but overused AA system. In fairness to Asobo they have implemented TAA well into the engine and its nowhere near as bad as some games, eg: RDR2@@stevem4005
*_"Q8, please don’t use TAA, it’s the worst AA."_* Total nonsense, because it's all about how it was implemented by the developer, you have bad TAA and great TAA. Secondly, at 4K you won't see any bluriness of TAA, because of the much higher pixel density, plus you're not going to have a 4K monitor one feet away from your eyes, unless you like to turn your head constantly like an id.iot. So yeah, you talk like a noob parrot who just mindless repeats what other noobs say.
@caribbaviator7058 No need for fanboy response, plenty people use AMD GPU and who doesn't use an AMD CPU for FS2020. The title could have said Nvidia instead of wasting folks valuable bandwith.
@@pgm1673 Plenty of who? And no one with reasonable common sense and money will buy AMD. This isn't a matter of being a fanboy. Its a matter of what works best and that is Nvidia. Pay less get less, the AMD way!
Thanks for the info, and I tried render scaling, but it created for me to some pixelated cloud edges, somewhat like vertical lines in them when flying.
It varied depending on the scaling set, DSR however although the same effect occasionally was much less noticeable when running my 1080 monitor at 2560 x 1600.
Great video. Thanks for the tips. I will try this on my system. I'm a long time watcher first time question. I see you are running an Intel setup. I have an AMD setup. In your settings you have AMD FEDELITYFX SHARPENING turned off or to zero. Now, being as i am running an AMD, where do you recommend me slidding this bar too? Or should i put this to zero as you have it? Tnx
Dude this is a great tip thanks! 🤘🤘
Native 4K DLSS 2 .... minimises shimmer, especially on the straight edges of glass cockpits.
The difference compared to reducing rez and TA is massive.
Not everyone has a bloody 4090.
A couple of things. If you are running 4K, you are likely to have a high end graphics card anyway, secondly Q8Pilot was refering to specifically 2K displays where shimmering was more pronounced, but anybody can oversample, it's an informed opinion which we can use to our advantage or not.
That what i need .. thanx dear Q8
Thanks for watching my friend, glad it helped.
Thanks! This helped ne a lot! Just installed MSFS and set these settings! By the way, when will you fly the colimata Concorde and the md11 in xplane12?
Glad it helped, thanks for watching!
My monitor is for 4k 60FPs since I got it for my Xbox series X but I play MSFS at 2K and I have a 3070. Should I stick with 2K or have it at 4k resolution in the sim? I also cap my FPS at 40
hello sir , i have problem screen flickerin on msfs interface page, than in sim, in other came and apps no problem.
only when msfs main page show up , fps is high 80 - 110
with ultra setting with 2k, no problem with machine
i have unstall addon, change monitor same issue, change to DX11 from dx12, stop G-SYNC, ENABLE V-SYNC SAME PROBLEM, bought new Pc because of this can't enjoy my flight, also change to deffrent refresh rate of my monitor,
nothing works, really sad, please if you know anything help. will be really appriciate. thanks
Thank you. I’ll try these out. I’m curious where you were flying? Was that the Los Angeles basin?
I am flying around KBUR.
@@Q8PilotAhh San Fernando Valley- I wasn’t too far off.
With the 4090 do you see ground texture issues when on ground using dx 12 and frame generation with high fidelity aircrafts like the pmdg ?
Yes it does happen sometimes, but it has reduced after the last few updates.
@@Q8Pilot thank you I thought my new 4080 super was buggy lol 😂 anyway enjoy the fenix a320 update great guys I tell you those developers 😁
I run a 4080 on a i7-13700 and the worst for me is the shimmering on my flight displays in the add-on aircraft like FBW or Fenix.
It’s like the writing on the displays is to thin or to “sharp”
I’ve tried every setting combination imaginable to fix or reduce it.
It only seemed to have gotten like that since upgrading from the Standard MSFS to the deluxe version.
Q8, please don’t use TAA, it’s the worst AA. It should never be used by anyone. If you have a top GPU, a 4090 in our case then all it does is add unnecessary blur. Just upscale to 4k and use DLAA
DLAA causes far more shimmering on my system.
As always, it depends on peoples system and you cannot make a definitive statement like that. For most TAA gives crisper display graphics for example.
And...not everyone can give Nvidia the amounts of money they want for a ridiculously overpriced 4090 can they!
TAA works in an exact way, it doesnt matter what the system is. The temporal effect smudges frames together. You can of course sharpen that out but its well known that TAA is a poor but overused AA system. In fairness to Asobo they have implemented TAA well into the engine and its nowhere near as bad as some games, eg: RDR2@@stevem4005
*_"Q8, please don’t use TAA, it’s the worst AA."_*
Total nonsense, because it's all about how it was implemented by the developer, you have bad TAA and great TAA.
Secondly, at 4K you won't see any bluriness of TAA, because of the much higher pixel density, plus you're not going to have a 4K monitor one feet away from your eyes, unless you like to turn your head constantly like an id.iot.
So yeah, you talk like a noob parrot who just mindless repeats what other noobs say.
No need to change anything in Nvidia control panel?
better idea, dldsr from 1080p->4k->1440p, reduced shimmering for fps equal to dlss quality 2k
Thanks Q8.
Thanks for watching!
unfortunately i get worse frames with resizable bar, do u have any idea why?
Just turn it off. Do you have it enabled in the Nvidia control panel?
i do@@Q8Pilot, thanks for the reply tho
Didn't work at all
This is for Nvidia, please say so I title.
Yes of course because who uses AMD? Maybe a huge minority!!
@caribbaviator7058 No need for fanboy response, plenty people use AMD GPU and who doesn't use an AMD CPU for FS2020. The title could have said Nvidia instead of wasting folks valuable bandwith.
@@pgm1673 Plenty of who? And no one with reasonable common sense and money will buy AMD. This isn't a matter of being a fanboy. Its a matter of what works best and that is Nvidia. Pay less get less, the AMD way!
I just use auto ortho
@@cammy9r nah nah boot up autoortho and direct it to your msfs scenery file works a treat.
1440p is NOT 2K, it's 2,5K. 2K is 1080p.
BTW, increase render scaling can result in trouble "click" switches in some airplanes.
are you dumb?