Jako dobrý, jen tedy bych velmi doporučil: - perfektně vyvázat všechny drátky k BMS tak, aby se nikde nedotýkaly pólů baterek okolo - speciálně u přenosných zařízení je to absolutní nezbytnost. Ta izolace na drátech nic moc nevydrží, zvláště v létě až změkne vedrem. - na drátky k BMS dát očka - takhle "nadivoko" se vám to po čase stříhne pod šroubem Prostě hezká konstrukce ale šetříte na nesprávných místech.
Hi Colby Scott, Good note. Of course, our battery is used with a 65Lb motor, so these cables should last. Thank you for mentioning that anyone who is watching this video and wants to build such a battery should take this into account. Carp Priests.
Ahojte ! Gratulujem vyzerá to dobre . Vydím že nerobili ste top balance !? A ani active balancer ste nenaištalovali !? Vedeli ste nejaký link na krabicu posielať ? A akú nabíjačku používáte ? Ďakujem
Zdravím, postupne sme batériu vylepšovali a naše súčasne batérie už aktívny balancer obsahujú. Nabíjačku používame: € 43,73 34％ Off | 14.6V 10A Charger 14.4V LiFePO4 Battery Smart Charger Used for 4S 14.4V LiFePO4 Battery Input 90-265V Global Certification a.aliexpress.com/_mPnsgdo , zelené krabice z videa sa nám už nepodarilo kúpiť, tak sme začali používať tieto: € 25,96 45％ Off | Plastic ToolBox Portable Waterproof Safety Protection Tool Box Shockproof Equipment Instrument Case Tool Case a.aliexpress.com/_mP7iXnu
Link na nabíjačku: € 43,73 34％ Off | 14.6V 10A Charger 14.4V LiFePO4 Battery Smart Charger Used for 4S 14.4V LiFePO4 Battery Input 90-265V Global Certification a.aliexpress.com/_mKfHiYI
Hi Jeroen Jeroen, Unfortunately, the case we used in the video is nowhere to be found, because it was ordered from the Slovak site... it no longer offers it for sale. Carp Priests.
Hi Nebojsa Cubra, in the video we used cables marked 15 AWG if you use the American table, or for easier searching use the diameter ø1.45mm / ø57.1thou (1.65 mm² / 2560 thou²). In any case, you can use cables with different diameters, depending on battery usage. For our cells, the continuous discharge is 3CA, which means 3 * (ampere value of the cells) / 3 * 90Ah = 270A continuous discharge. Depending on that, you will choose the right cable diameter. Carp Priests.
Hi Francis Okezie, Sorry, but the suitcase in which we have it was ordered from the local site in Slovakia. It can no longer be found on this site. Carp Priests.
Dobrý deň p. Balog, bohužiaľ predajca, od ktorého sme články kupovali stiahol svoj predaj zo stránky. Tieto články sme mali odskúšané, že sú celkom kvalitné. V tomto čase Vám nedokážeme poradiť, ktorý predajca má kvalitnejšie produkty. Odporúčam si urobiť rešerš po nejakých fórach, poprípade z RUclips videí. S pozdravom, Carp Priests.
Hi Deneys, Thank you for your comment. We use the usual LiPo charger IMAX B6 AC 80W B6AC (www.aliexpress.com/item/32955178244.html) for charging. This has a maximum output current of 6A, but if you need to charge the battery faster, you can also use a stronger charger. We personally use this, because it does not produce large voltage fluctuations even during longer charging, as is usually the case with car chargers. If you have any further questions, please feel free to contact us. Carp Priest.
Thank you for your positive feedback. We wish you good luck with your future assembled batteries. Should you need any further information, please do not hesitate to contact us. Carp Priests. :)
Hi Roy Xavier, thank you for your feedback. The case that we used to build the battery was purchased from our local website Minučák.sk (www.municak.sk/). Specifically, they no longer have the case we used on the site, but you can use any case that will meet the dimensions. See the dimensions of one battery cell and adjust the dimensions of the case according to the number of battery cells purchased. If you buy exactly the battery cells that we used in the video, then you need the dimensions of the case, at least 17x12.7x19.2cm. But you also have to take into account the space for the BMS module. If you want to use the same components as us, you have to keep a reserve over the battery cells, as the switch is quite high as well as the terminals. If you require any further information, feel free to contact us. Carp Priests.
Hi christophe dana, I have translated your comment so I will hope to answer the questions you are asking correctly. We used 4S BMS 150A. We recently replaced it with a waterproof BMS because it has no protection against external influences in the video. You must now select the parameters according to the battery usage. The second question you asked. The wiring diagram in this video is for connecting 4S BMS with separete ports. You will find a lot of information on the Internet. If you have more questions, feel free to contact us. Carp Priests.
Hi The ForgottenMan, The box we used in the video was from our local Muničák website (www.municak.sk/). Unfortunately, they no longer have this product in their e-shop. A few times we found a similar copy on the Internet (Wish, AliExpress). But you can use another one, just be careful if you want to use it outdoors (electric motor on the boat, etc.) to buy a waterproof box. * If you find a good similar box, if we could ask you to send us a link and we'll add it to the description. * Carp Priests
Hi Tom IV, thanks you for your comment. The answer to your first question is, that we wanted to differentiate the cables by colour so that the watcher could look more closely at the scheme, because the goal was not only to show the battery to a more knowledgeable electrician, but also to those who are laymen and want a better battery. And the answer to your second question. We did not measure the continuous current during the test, because it seemed unnecessary to us, because everyone can see the specifications of the LiFePO4 cells given by the manufacturer. The manufacturer states a maximum constant discharge current of 3CA (about 270A). We apologize if you wanted a more accurate test. Thanks for your response, and we'll try to fix the shortcomings in the future.
@@carppriests69Also, Which BMS did you get the 50a common port or the 150a separate? I want to copy the build you guys have made if you could just share where you sourced the container you used to put that battery in as well that would be a huge help! keep up the great content and looking forward to more videos!
Hi, sorry for the late reply. - We used a 150A separate BMS port in this kit. - We ordered the case that we used in the video from the Slovak website Muničák (URL address here: www.municak.sk/plastovy-box-vodotesny-26-7-x-23-9-x-17-6 -cm-olive-27163), to which were also foam fills. If you won't understand the language, translate it into Slovak language, or write to us here or by email. Thank you for your positive feedback. Have a nice day.
Hi Kevin Mills, Yes, we also experienced it a few times. We always recommend that you do a small research about the product on some forums or videos before making a purchase. Carp Priests.
Aliexpres is the most deceptive web site for internet shoppers, they keep the money for 4 months before they return the money back to you because many of this seller don't shipped the item. I don't recommend this people, don't trust them.
Hi Joe Reyes, I think that's a pretty subjective opinion. I'm definitely not saying that all AliExpress products are of high quality, so even in our case we have been deceived many times. We were happy with the cells used in the video and we used them many times in different builds. We always recommend that you do a small research about the product on some forums or videos before making a purchase. Carp Priests.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Jako dobrý, jen tedy bych velmi doporučil:
- perfektně vyvázat všechny drátky k BMS tak, aby se nikde nedotýkaly pólů baterek okolo - speciálně u přenosných zařízení je to absolutní nezbytnost. Ta izolace na drátech nic moc nevydrží, zvláště v létě až změkne vedrem.
- na drátky k BMS dát očka - takhle "nadivoko" se vám to po čase stříhne pod šroubem
Prostě hezká konstrukce ale šetříte na nesprávných místech.
But what about the isolation between the elements?
I might recommend large gauge wire. Trolling motors can require up to 6ga wire. Wouldn't want the battery pack to be the weak link.
Hi Colby Scott,
Good note. Of course, our battery is used with a 65Lb motor, so these cables should last.
Thank you for mentioning that anyone who is watching this video and wants to build such a battery should take this into account.
Carp Priests.
I really like ur videos, keep up the good work 🎣
Ahojte ! Gratulujem vyzerá to dobre . Vydím že nerobili ste top balance !? A ani active balancer ste nenaištalovali !? Vedeli ste nejaký link na krabicu posielať ? A akú nabíjačku používáte ? Ďakujem
Zdravím, postupne sme batériu vylepšovali a naše súčasne batérie už aktívny balancer obsahujú. Nabíjačku používame: € 43,73 34％ Off | 14.6V 10A Charger 14.4V LiFePO4 Battery Smart Charger Used for 4S 14.4V LiFePO4 Battery Input 90-265V Global Certification
a.aliexpress.com/_mPnsgdo , zelené krabice z videa sa nám už nepodarilo kúpiť, tak sme začali používať tieto: € 25,96 45％ Off | Plastic ToolBox Portable Waterproof Safety Protection Tool Box Shockproof Equipment Instrument Case Tool Case
a.aliexpress.com/_mP7iXnu
Good job boys!!! Keep it up!!!
nice clean build.
Dakujem za video :) , chcem sa spítať aku nabijačku použivate pripadne odporučiť nejakú z aliexpresu
Link na nabíjačku: € 43,73 34％ Off | 14.6V 10A Charger 14.4V LiFePO4 Battery Smart Charger Used for 4S 14.4V LiFePO4 Battery Input 90-265V Global Certification
a.aliexpress.com/_mKfHiYI
What is the link for battery box?
Awesome mate ! Wich case did u use ?
Hi Jeroen Jeroen,
Unfortunately, the case we used in the video is nowhere to be found, because it was ordered from the Slovak site... it no longer offers it for sale.
Carp Priests.
Ahoj vedeli by ste mi vyrobit taku 12v 120ah baterku ?
Great work! What wire gauge did you use?
Hi Nebojsa Cubra,
in the video we used cables marked 15 AWG if you use the American table, or for easier searching use the diameter ø1.45mm / ø57.1thou (1.65 mm² / 2560 thou²).
In any case, you can use cables with different diameters, depending on battery usage.
For our cells, the continuous discharge is 3CA, which means 3 * (ampere value of the cells) / 3 * 90Ah = 270A continuous discharge.
Depending on that, you will choose the right cable diameter.
Carp Priests.
Could you please also post a link to the battery box / container
Hi Francis Okezie,
Sorry, but the suitcase in which we have it was ordered from the local site in Slovakia.
It can no longer be found on this site.
Carp Priests.
Ahoj, prosím ta, vieš zdieľať odkaz odkiaľ presne si nakupoval batérie? Vopred dik
Dobrý deň p. Balog,
bohužiaľ predajca, od ktorého sme články kupovali stiahol svoj predaj zo stránky. Tieto články sme mali odskúšané, že sú celkom kvalitné.
V tomto čase Vám nedokážeme poradiť, ktorý predajca má kvalitnejšie produkty. Odporúčam si urobiť rešerš po nejakých fórach, poprípade z RUclips videí.
S pozdravom, Carp Priests.
How do you charge the battery? Do you use a regular 12v car batter charger?
Hi Deneys,
Thank you for your comment. We use the usual LiPo charger IMAX B6 AC 80W B6AC (www.aliexpress.com/item/32955178244.html) for charging. This has a maximum output current of 6A, but if you need to charge the battery faster, you can also use a stronger charger. We personally use this, because it does not produce large voltage fluctuations even during longer charging, as is usually the case with car chargers.
If you have any further questions, please feel free to contact us.
Carp Priest.
Thanks for the reply and great tutorial .... going to start getting the parts to build my own.
Thank you for your positive feedback.
We wish you good luck with your future assembled batteries.
Should you need any further information, please do not hesitate to contact us.
Carp Priests. :)
are they 90ah each battery or all together?
Hi John Braman,
each cell is 90Ah (serial connection ... 4x90Ah 3,2V = 1x90Ah, but 12,8V).
Carp Priests.
Bonjour je voudrais savoir où c'est que tu as pris la valise sur qelle Site pour faire la batterie merci
Hi Roy Xavier,
thank you for your feedback. The case that we used to build the battery was purchased from our local website Minučák.sk (www.municak.sk/). Specifically, they no longer have the case we used on the site, but you can use any case that will meet the dimensions. See the dimensions of one battery cell and adjust the dimensions of the case according to the number of battery cells purchased.
If you buy exactly the battery cells that we used in the video, then you need the dimensions of the case, at least 17x12.7x19.2cm. But you also have to take into account the space for the BMS module.
If you want to use the same components as us, you have to keep a reserve over the battery cells, as the switch is quite high as well as the terminals.
If you require any further information, feel free to contact us.
Carp Priests.
Bonjour
Merci pour la vidéo intéressante
Je voudrais faire la même
Quelle bms a tu mis ?
Aurait tu un schéma pour le câblage bms ?
Merci à l’avance
Hi christophe dana,
I have translated your comment so I will hope to answer the questions you are asking correctly.
We used 4S BMS 150A. We recently replaced it with a waterproof BMS because it has no protection against external influences in the video. You must now select the parameters according to the battery usage.
The second question you asked. The wiring diagram in this video is for connecting 4S BMS with separete ports. You will find a lot of information on the Internet.
If you have more questions, feel free to contact us.
Carp Priests.
Do you have a link to the box?
Hi The ForgottenMan,
The box we used in the video was from our local Muničák website (www.municak.sk/). Unfortunately, they no longer have this product in their e-shop.
A few times we found a similar copy on the Internet (Wish, AliExpress). But you can use another one, just be careful if you want to use it outdoors (electric motor on the boat, etc.) to buy a waterproof box.
* If you find a good similar box, if we could ask you to send us a link and we'll add it to the description. *
Carp Priests
why two different color tapes? and what is the continuous amp output of these?
Hi Tom IV,
thanks you for your comment. The answer to your first question is, that we wanted to differentiate the cables by colour so that the watcher could look more closely at the scheme, because the goal was not only to show the battery to a more knowledgeable electrician, but also to those who are laymen and want a better battery.
And the answer to your second question. We did not measure the continuous current during the test, because it seemed unnecessary to us, because everyone can see the specifications of the LiFePO4 cells given by the manufacturer. The manufacturer states a maximum constant discharge current of 3CA (about 270A). We apologize if you wanted a more accurate test.
Thanks for your response, and we'll try to fix the shortcomings in the future.
@@carppriests69Also, Which BMS did you get the 50a common port or the 150a separate? I want to copy the build you guys have made if you could just share where you sourced the container you used to put that battery in as well that would be a huge help! keep up the great content and looking forward to more videos!
Hi, sorry for the late reply.
- We used a 150A separate BMS port in this kit.
- We ordered the case that we used in the video from the Slovak website Muničák (URL address here: www.municak.sk/plastovy-box-vodotesny-26-7-x-23-9-x-17-6 -cm-olive-27163), to which were also foam fills. If you won't understand the language, translate it into Slovak language, or write to us here or by email.
Thank you for your positive feedback.
Have a nice day.
A friend bought some 100Ah cells from AliExpress but they turned out to have only 35Ah capacity. A complete rip off.
Hi Kevin Mills,
Yes, we also experienced it a few times.
We always recommend that you do a small research about the product on some forums or videos before making a purchase.
Carp Priests.
up to 96S LFP and NMC BMS :ruclips.net/video/ptQDb-Er8nc/видео.html
Aliexpres is the most deceptive web site for internet shoppers, they keep the money for 4 months before they return the money back to you because many of this seller don't shipped the item. I don't recommend this people, don't trust them.
Hi Joe Reyes,
I think that's a pretty subjective opinion. I'm definitely not saying that all AliExpress products are of high quality, so even in our case we have been deceived many times. We were happy with the cells used in the video and we used them many times in different builds.
We always recommend that you do a small research about the product on some forums or videos before making a purchase.
Carp Priests.