I just did my first set of neoprene table coaster's and they turned out perfectly! Emma, like everyone else, I learn SO much from watching your video's! I have pages and pages of note's!! Thank you for what you do!! ❤❤❤❤
Thank you, was wondering about the neoprene ones. Just like you I get on a roll and have a few oops moments - especially with the lint roller! Have a great day Emma.
Hi, love your video's, im very new to sublimation - where did you get the Buckle up Buttercup image that you use on the neoprene coasters? love it thanks Heather
Had a request at a show this weekend for car coasters.I Just placed a order for some coaster blanks and found your info very helpful. But do I have a question what is the best way to clean the neoprene coasters after the customer has used them for awhile?
This is the StarCraft Clam Shell heat press, I love it! You can get yours at My Craft Source. It is often out of stock but you can click the email link to get added to the "back in stock" notifications. Be sure to use our group code EmmasCottage to get 5% off! mycraftsource.com/starcraft-15-x-15-clam-shell-heat-press-mint.html/?partner=238074 Clicking our group links does help support this channel if you do decide to purchase, thank you!
Where did you get the packaging for your coasters? I just got some coasters and just came across your video on how to do coasters and didn't even think about packaging!!
I just listed this design on my Etsy page. You can find it here, www.etsy.com/listing/1195460405/buckle-up-buttercup-png-car-coaster?click_key=88fbcc742e4a77114454e57099f073230696acef%3A1195460405&click_sum=d7065d85&ref=shop_home_active_6
I designed that image in Cricut Design Space. Just choose a background you like, then type the words, then cut the words from the background and you’ve got the image!
Hi I was wondering if once the coaters are finished..does the top have to be sealed with something, so as not to damage photo image? Thanks so much in advance.
This is my favorite mist spray bottle! This is my Amazon Link and I earn if you click and purchase from my links! Thanks for supporting my channel! amzn.to/3HeUuE2
You can find all the products I use on my Amazon Storefront. Here is a direct link to the butcher paper holder. www.amazon.com/dp/B088C44SQN?linkCode=ssc&tag=onamzemmas0fa-20&creativeASIN=B088C44SQN&asc_item-id=amzn1.ideas.2LL1TH14D8JSK&ref_=aip_sf_list_spv_ons_d_asin
Have you tried testing the heat? Sounds like it may be telling you a certain temp but it’s really not that hot. You can purchase a heat temp gun to measure it. If it is reading correct, try pressing a little longer. If it’s still not working then I’d say you have a faulty substrate.
Each brand is different. Use a measuring tape to measure straight across your coaster, if it’s 2.5 then print about 1/4 larger so you don’t have the white marks that I did! Have fun!
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
If you enjoyed this video, please give it a THUMBS UP and SHARE the video with a friend as it helps me in the RUclips algorithm! 😀
👇 COMMENT BELOW 👇
Nice to see you back Emma I miss your videos 💕✨
Yay! Thank you! I've been so busy! I miss making videos but should be able to pick back up the pace soon!
I just did my first set of neoprene table coaster's and they turned out perfectly! Emma, like everyone else, I learn SO much from watching your video's! I have pages and pages of note's!! Thank you for what you do!! ❤❤❤❤
How exciting! Thanks so much for watching, and for your kind words!
Really enjoyed your video. Thank you!
Glad you enjoyed it!
Thank you, was wondering about the neoprene ones. Just like you I get on a roll and have a few oops moments - especially with the lint roller! Have a great day Emma.
Glad it was helpful! Thanks so much for watching! I hope you have a wonderful weekend!
I have some coasters on order. Can't wait for them to come in! Loved the ones you showed, His and Hers
Yippy, I'm so excited for you! Thanks for being a valued Subscriber!
They still look good New to your channel I liked the videos
Thanks so very much!
Hi, love your video's, im very new to sublimation - where did you get the Buckle up Buttercup image that you use on the neoprene coasters? love it thanks Heather
Thanks for watching! I made it within Cricut Design Space.
Loved your video!
Glad you enjoyed it!
Love it so much
Thanks Allison! I hope you are well!
@@EmmasCottage yes mam doing good
Had a request at a show this weekend for car coasters.I Just placed a order for some coaster blanks and found your info very helpful. But do I have a question what is the best way to clean the neoprene coasters after the customer has used them for awhile?
Hand wash in warm water with Dawn dish soap.
Thank you so much, I have a question, for what side I need put my butcher paper? glossy side up or matte?
I don’t use butcher paper with gloss on it.
What heat press do you have? Love the color!
This is the StarCraft Clam Shell heat press, I love it! You can get yours at My Craft Source. It is often out of stock but you can click the email link to get added to the "back in stock" notifications. Be sure to use our group code EmmasCottage to get 5% off! mycraftsource.com/starcraft-15-x-15-clam-shell-heat-press-mint.html/?partner=238074 Clicking our group links does help support this channel if you do decide to purchase, thank you!
LOVE IT!!!! IM NEW TO YOUR CHANNEL.
So happy to have you!
@@EmmasCottage thank you.
Where did you get the packaging for your coasters? I just got some coasters and just came across your video on how to do coasters and didn't even think about packaging!!
I used the packaging they were shipped with when I purchased them.
Good Morning Emma, I love love love watching your videos. Could you share where we can find the Buckle up Butter cup design?
I just listed this design on my Etsy page. You can find it here, www.etsy.com/listing/1195460405/buckle-up-buttercup-png-car-coaster?click_key=88fbcc742e4a77114454e57099f073230696acef%3A1195460405&click_sum=d7065d85&ref=shop_home_active_6
Would you also link to where you got the file Come Home to Me? Thanks.
I designed that image in Cricut Design Space. Just choose a background you like, then type the words, then cut the words from the background and you’ve got the image!
Hi I was wondering if once the coaters are finished..does the top have to be sealed with something, so as not to damage photo image? Thanks so much in advance.
I do not seal mine at all, I have never had a problem.
@@EmmasCottage oh awesome thanks so much for your quick response.
Hi, what kind of spray bottle do you use and where do you buy it?
This is my favorite mist spray bottle! This is my Amazon Link and I earn if you click and purchase from my links! Thanks for supporting my channel! amzn.to/3HeUuE2
Can I ask where you got your cabinet? I've been searching for one and cannot find one
My husband made all of my cabinets in my studio.
@@EmmasCottage i absolutely love it!
Where did you get your butcher paper holder?
You can find all the products I use on my Amazon Storefront. Here is a direct link to the butcher paper holder. www.amazon.com/dp/B088C44SQN?linkCode=ssc&tag=onamzemmas0fa-20&creativeASIN=B088C44SQN&asc_item-id=amzn1.ideas.2LL1TH14D8JSK&ref_=aip_sf_list_spv_ons_d_asin
I did the same pressure with mine and same temp, with the seconds and my ceramic ones still was very light. Idk what I’m doing wrong
Have you tried testing the heat? Sounds like it may be telling you a certain temp but it’s really not that hot. You can purchase a heat temp gun to measure it. If it is reading correct, try pressing a little longer. If it’s still not working then I’d say you have a faulty substrate.
How do you cut out for the finger cut out.
I don't, I just print the image as a circle and then just make sure that no writing is on the area where the finger knoch is.
What are the measurements for the neoprene coasters please?
Each brand is different. Use a measuring tape to measure straight across your coaster, if it’s 2.5 then print about 1/4 larger so you don’t have the white marks that I did! Have fun!
Your good, we all make mistake and are human, leave it in the videoso we all learn, thanks
Very true!
Did you cut out the words for the neoprene "Come Home To Me"
I did. I just found the background in Cricut Design Space, then typed the words and selected both and cut.
You sound like me doing this. Lol
I'm thinking, the cutout could have been at the top or bottom to avoid the words. Just saying.
Agreed! Thank you.
My ceramics never work on sublimation. So bummed.
Sorry to hear that, be sure that you are not trying to sublimate directly onto ceramic, it needs to have the sublimation coating for it to adhere.
Do I have to prepress the neoprene coasters before sublimating?
It’s best practice to prepress them for about 5 seconds. I always forget to prepress mine.
Okay....You're adorable....thanks for not being perfect :) I learned what I did wrong on my first neoprene coasters. TOO HOT and TOO LONG
You are so welcome!
hello i am selling car coasters png files. Can I share your video in my own store? I want my customers to know how to print their files
Yes, that would be fine! Thank you!