Airless Sprayer Disaster. Repair Your Sprayer in 8 Minutes.
HTML-код
- Опубликовано: 24 окт 2018
- Disaster strikes when your airless paint sprayer goes down. How to repair your airless sprayer in 8 minutes. Prime Valve Repairs.
🛠TOOLS USED IN VIDEO⚒
Airless sprayer equipment: t.ly/RnsC
Paint Life Gear: paintlifesupply.com/
More painting tips and written blogs from The Idaho Painter: t.ly/VMzn
👀ABOUT CHRIS 👀
I started The Idaho Painter RUclips channel as a way to help out others who were trying to paint themselves. I have a passion for painting and helping other people to fall in love with painting. My primary focus is to educate, empower, and equip painters word wide. Hope you enjoy our channel.
📌Due to factors beyond the control of The Idaho Painter (or Chris Berry and the Paint Life crew), We cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter and Paint Life assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter.
Joshua 1:9 
Хобби
I can't thank you enough guys! I rebuilt the pump and was still having the same problem. Seals for the pump were only $20 so it's not a bad thing, but now I know where the problem must be. I love your videos!!!
Thank you so much for making this! I have the same sprayer giving me trouble and thought I needed to have the pump rebuilt. You guys just saved me a ton of money!
I am having this exact problem. I will be doing this with my sprayer asap. Thanks guys!
I painted SOOOO many houses in the Moscow-Pullman area, and all around the Palouse. 18+ years. So many different companies, including UofI Residences, and my own small shingle as well. Retired in about 2006 to go into something less hazardous. Pulled out my 440i to help a neighbor yesterday (packed in mineral spirits to keep from freeze damage in storage) and it had a tough time keeping primed. Thought I would have had to rebuild my whole fluid section, but it did build up pressure nicely once you hit the prime valve and got the paint up to it. From your video, it sounds like my lower fluid section just needs gone through, and hopefully just cleaned out and lubed up. Thanks for the video and for taking me back!
Great video very explanatory !!!! thanks guys I’m now living in Argentina South America I have a titan XT440 working extremely well for 10 years and I just have that issue this week on a big job spraying water base poliuratene coat on a Tin roof..... thanks again guys you’re really save me my day !!!
Worked perfect for my situation. Wish I watched it 2.5 hrs ago
Good Luck
Great job, one of the small things I overlooked!
Thanks guys!
Thank God I found this video, I was about to send my rig to get fixed but tried this and works like charm now sheesh
Great video. Thank you
Thank you guys.. That video helped me bcoz my machine hade that trouble and i did nt know how to remove that prime knob..you heled me.. thank you again..
Thanks for the video guys ❤️ always the best
Thanks for watching!
Super helpful Chris and John!
Thanks for watching Terry!
Thanks for another great video Chris! I've had my 440 for about four years now and think it is due for prime valve clean.
You are probably right, thanks for watching!
Thanks for the instructional. I keep a gutter nail to knock my ball loose on the 400 upright. I let your disaster happen to me one time and one time only. Luckily I had a new Graco for a spare that day. It seems like the titan balls don't clean very easily. I make sure that it isn't stuck before every use now.
I ran across your video looking for a gun rebuild tutorial. The paint store manager used to rebuild mine for free while I took a coffee break. So I never bothered to try to learn how until now. TFP
Perfect!
Just got it cleaned on my T4010 sprayer, as there was a bit of pressure loss from the prime value.
Glad it helped
I wonder if this will work on my graco sprayer. I've been having priming issues. It will take forever to start priming. Like it has week suction. I've cleaned everything but I didn't think I could take that apart to clean it. Thank you once again for your videos.
thank so much god bless you guys
You are welcome
Love this
Me too!
Hey quick question.. do you need to adjust the brass part of the valve by tightening or loosening it? My new valve came with it only halfway screwed down.
Thank you 🙏
Nice!!
Hi, I haven,t used my spayer in over 10 years, what chould i do to get it up and running ?
Hi, my titan 410 just started leaking from the pump, any ideas how to fix?...is it worth sending off for a service?
You should make a video on how to replace the seals and gaskets
OK, enjoying your videos, and I noticed that while pulling the pressure prime valve, there is a lot of paint. What is the best way to clean off paint ? Both fresh paint and dried up paint?? I have a gun which sat for over a year with paint on it. Trying to clean that of as well as the sprayer pump itself. Thanx, keep up those videos!!
Thanks but how do I make sure there is no pressure in the system.
i have a titan 600 sprayer 5 amp 250 fuse keeps popping help please
Thanks guys . You saved my day . And btw my pin was regular nail . Not sure if this is how supposed to be . I replaced it with eazy to remove one for future cleaning
No power on my 490 grace any ideas please
Good
Do i have to tighten my guard and extension on the gun when I spray with a wrench or just hand tighten? If i tighten to much with a wrench it makes it impossible to straighten the guard and tip, thank you for all your help, just bought a titan 440 and it's so much fun, wish I bought one sooner
Well they are supposed to be hand tightened only. If you use a wrench you will have to get it straight first
Wow thanks I have this sprayer and never cleaned that part . Do you all have a u other videos repairing this model?
We have several videos on repairing
Ii bought an older Graco without a gun ,how much water should come out of the hose without a gun on it ? It primes and runs water out of the hose but it's just a small stream ,I just want to make sure it works before buying a gun thank you
@Idahopainter Any info you can give for a titan 6900 that won't prime. Units been sitting for about 6 months. Any help is useful at this point. I do appreciate your dedication to helping others in the trade.. More often than not we see so many blow and go company's that don't respect the trade..
Help help help!!! I've watched your bids on this. ICANNOT get mine to prime!!!! Large check ball is clean. Large hose and return hose are clear. Not sure how clean I got the prime valve from this video. Anything else?????
Can’t get pin to come out any suggestions?
I have the same sprayer. When I plug and turn it on. A yellow light come on and stay on. But the sprayer wond do nothing is like is dead. Some one help please
Dude thanks pretty badass dudes for
u r welcome
My graco contractor hand piece is leaking badly. Got a needle replacement kit for 84$ from SW. Do you know of a "how to" video on disassembly and repair on the needle and tip of the graco handpiece? Thank you.
Where is it leaking from? could be as simple as the head gasket if its the packing it would just spit badly not leak from my experience ive had it leak from my head coming loose or the gasket seal inside of the head from not being swapped out when i change products
I went to WAZZU so I love the intro.
Awesome!!!! We love it!!!
Is there a screen on the pick up tube?! Weird rocks got past it if so.
Yeah, but it's not that fine of a filter. Anything 1/32" or smaller is going to get through the pickup screen. That prime valve orifice is small enough to suffer problems from debris right around that size, and a lot of paint can get dirt in it at the factory that might mess with that valve. Or even if it got left out in the sun for too long. I've found it helps immensely to filter/strain your paint before you work with it. Also keeps spray tip clogs down to a minimum.
hi good day my titan it's not working only blinking yellow light and green
Do you strain your paint before spraying, I have used my Graco x7 to spray interior doors and walls but used only Sherwin Williams and didn't have problems with junk in paint till today. Using supplied paint from a manufacturer I had never heard of and the sprayer did not like, it clogged the strainer in the 5 Gal bucket of paint ,the tip Graco X517.and the gun filter. What a mess i couldn't spray 10 sq ft without cleaning strainer. I am going to strain it with both the pan strainer and the bag style and try to get this latex cleaned up. I am spraying a barn so only 65 gallons left...good times
Always strain your paint tight mesh for oils and solvents and wide mesh for latex plus check your filter if using latex make sure filters are a wide mesh and if using oil or solvents make sure its a tight mesh
@@emilioreed3667 Once I told the home owner about the chunks in the paint he said it was from a paint recycle factory and was told they strained it so back it goes and the barn will have to wait till spring.
Anyone know what else could be wrong, i can not get my 440 to prime, ive changed the filter in the gun and the filter that goes under the rig, i just cleaned the valve but it still will not prime?
Something stuck in the lower ball
@@Idahopainter I cleaned out the lower ball it can move, but it still will not prime, could the valve itself be bad?
Good day folks
I got question for you guys I bought semi gloss paint can I use semi gloss paint to exterior walls?
If it is exterior paint
Chris my wall is bricks and I tried some parts of the wall and I can see all marks. Any idea that semi gloss become low sheen? I can’t return the paint coz they put colour on it.
It’s 15 litter 😔
The dulux says put semi gloss as first coat then use low sheen a second coat is that ok?
@@reggz1deleon201 - I think they got that backwards.
A little brown /green plastic tarp under the pump would contain the leaked paint. Other than that, Good Video!
Also to keep from losing parts
Hi whats the name of this machine
That's a Titan 440. I've had one for 20 years and never had any problems with it. I was just looking at this for future reference. I paid about $800 for mine, laughed to myself this tiny things not worth that, but the salesman said it an excellent airless. 20 years later. And no problems, I'm sold on this airless.😃
I've not had to do that yet. But good to see it done. One thing about self employed painters, it helps to be good "problem solvers", and making decisions quickly. (Perhaps a topic for a video).
Even with the skills of a painter, priorities is also key. What's most important in life? Painting allows me to be able to focus on other areas of life, even thinking about the big questions, like Origins, Meaning, Morality, and Destiny.
I would not like to make it through life and not prepare for the afterlife. To me, Jesus answers our questions, and further study can be made by checking out Ravi Zaccariah videos, and reading the book of John. God bless.
scott m agreed blessings from Canada
Every painter I've ever met, with the sole exception of one, was either a Jesus freak or a drug addict. Sometimes both. And neither iteration was trustworthy.
And BTW, what's best in life is to crush your enemies, see them driven before you, and to hear the lamentations of their women!
@@mdemers767 Many painters do have addictions. But some are smart and make sure of what's important in this life, and into eternity.
I assume you are being sarcastic about the other stuff you mentioned.
People mistake being victorious as being evil. To God, even though He is King, He is Loving and wants all people to come to repentance. But those that try to fight God will lose. Psalm 2 talks of Kings getting together to try to fight God. It says God laughs, because it is not possible. God Is who He Is. Deal with it.
Too bad you couldn’t use a camera to show the disassemble/reassemble with close-ups of the procedure.
Boughton? Not a word
Correctly spelled, 'boughten' (adj) is most certainly a word. Might want to check a dictionary next time your feeling snarky. lol
@@JLT3 - Not in the context it was used. My mom would have beat me if I had ever used it like it was in the video. Who's snarky now, you grammar Nazi?
Thanks y’all are hot too by the way :)
Money.
Typical painter:
Wrong tools, just work on the grass on your knees & drop your parts in the grass (oh except the pin thoughtfully placed in your mouth)
Geez I wonder how the “rocks” got in the paint, you guys are so careful 🤔
& I have to watch tee shirt and hat adds, on top of RUclips’s ads just to watch you jamokes.