How to diagnose a CURTIS 1268-5403 controller with a CURTIS 1313-4401 Handheld Programmer

www.noco-evco.c...
www.noco-evco.c...
We've moved to our new website: www.noco-evco....
The 1313-4401 is a CURTIS OEM level (for vehicle manufacturers or repairers) handset, having full access to CURTIS programmable controllers. For different CURTIS programmable controllers, the connection of programmer will be different. For a 1268 controller, you need to connect the J1-1, J1-2 and J1-4 terminals to B+ of power source of 16V DC or higher (not higher than the controller nominal voltage). The B- busbar of controller should also be connected. Then plug-in the 4-Pin Molex connector of programmer. With this handset, you may easily view and modify the controller parameters. There are different access level for 1313 programmers. For USER level programmer, some parameters will not be accessible.

[@MsPAPA1968]

Hi am Robert and i have lot of issues with Curtis motor control for the golf cart can you help me know how to repair them please

[@AldenDENG]

It is recommended that you check the error history of your controller. By identifying the last error of controller, you may possibly find the reason of controller fault.

[@smille5291]

my 1311 handheld wont power on I'm using a 20 VOLT power supply is that enough power to turn on the 1311 ? Also I am getting a 2-1 code flash but the handheld wont power up while plugged in

[@AldenDENG]

We were told that 16.8V DC source can power on a CURTIS controller. But in practice, the lowest voltage that we've tried is 19.6V, on a CURTIS 1204M controller. For most occasions, we use 24V DC source. It is also recommended that you use a 24V DC source.

[@hoadedhoo]

Can you please clearly say what are the cable you connect

[@AldenDENG]

For a 1268 controller, you need to connect the J1-1, J1-2 and J1-4 terminals to B+ of power source of 16V DC or higher (not higher than the controller nominal voltage). The B- busbar of controller should also be connected. Then plug-in the 4-Pin Molex connector of programmer. With this handset, you may easily view and modify the controller parameters.

[@kevhino260]

Where do i buy this oem programmer

[@AldenDENG]

In our online store, there are 3 options:
1. CURTIS handheld programmer 1313-4331: www.noco-evco.com/product/1313-4331.htm
2. CURTIS PC station programmer: www.noco-evco.com/product/1314-4402.htm
3. DALA handheld programmer DS13C (compatible with CURTIS 1313-4331, economic version): www.noco-evco.com/product/DALA.htm

[@encryped]

Does the 1313 also work on a 1264-5403 ??

[@AldenDENG]

According to the user manual, the programmer 1313-4401 works with all CURTIS programmable controllers. But we have not a controller 1264-5403. So we don't have the experience of connecting the programmer to a controller 1264-5403.

[@robertoperez7445]

how can I contact you

[@AldenDENG]

Hi, we've recently moved to our new website: www.noco-evco.com/ . You may find our contact information on the "contact" of our website. Or you can send email to us, [e-mail] or [e-mail]

[@AldenDENG]

The new version 1313 OEM level programmer is now available: www.noco-evco.com/product/1313-4331.htm

[@epeleg]

Any idea on how to get updated firmware for the 1313-4331 HHP ?